Linksys Wireless Router :: WRT54GS - Connecting To Internet - Repeatedly Encountered Error 651?
Nov 5, 2011
My xp computers recently gave up. So, I bought a new one (windows 7).
When I had my new computer plugged directly into my modem, there was no problem; I could easily connect to the internet.Yet, when I plugged the modem into my router (WRT54GS) and then plugged the router into the computer, I repeatedly encountered: Error 651.
The new computer has a built-in wireless adapter. So, I was able to disconnect the router and try to re-connect via a wireless connection. Yet, dispite being able to connect to my "network", the computer was not able to connect to the internet; again, I received the dreaded Error 651 message.I tried using the installation disk, but it would not work, either.
View 3 Replies
ADVERTISEMENT
Mar 24, 2013
I've deployed AnyConnect on Windows 7 clients, and they are throwing this message after few days of usage: "The VPN client driver has encountered an error."
-Version: anyconnect-win-2.4.0202-web-deploy-k9
-OS: Windows 7 Pro 64-bit
-FW: ASA 5505
What seems to fix it:
1. Uninstall Any Connect Client then,
2. Remove C:UsersUserAppDataLocalCisco folder
View 4 Replies
View Related
Aug 4, 2011
I have a wireless network in a 2 storey house. The internet access and 1 WRT54GS router is on the 1st floor (using frequency channel 11). The wireless single doesn't do very well on the second floor unless there is a device with a strong antenna. I recently purchased a WET610N Bridge and I have an extra WRT54GS (using frequency channel 1).
I would like to be able to add wireless to the 2nd floor by attaching the extra router to the bridge which would wirelessly connect to the router with the internet.
View 2 Replies
View Related
Aug 29, 2011
Trying to connect my Dell Dimension E310 to my Linksys WRT54GS with a TRENDnet wireless N USB adapter. It sees the router, it connects, I show strong signal strength, but get a "limited connection or no connection" error back from the router...can't get on the Internet. If I use an Ethernet wire and connect it to the router, it can set up a wireless connection with the machine, I can unhook the hardwire, and I'm good to go. But every time I reboot, it won't connect unless I set it up with the hardwire first. Impractical.All other devices attached to the router are fine and connected to the Internet. How can I get the router to maintain the settings for this new connection so it will connect wirelessly when I reboot?
View 1 Replies
View Related
May 26, 2011
Trying to get this linksys router working on my network. It is a wrt54gs. The machine that i'm configuring it with is running a 64-bit version of windows 7. I run the disc and it seems as if no matter what i try it will not connect to the internet. Can plug modem directly to pc and connect no problem. Can connect to router no problem. But cannot connect to the internet through the router.I made sure that ip addresses are assigned dynamically through dhcp and cloned the mac address of the pc i'm using to do the initial setup.
View 4 Replies
View Related
Apr 11, 2012
I have a single user with the 2.4.1012 any connect VPN who can not establish his tunnel.We have many other users who can connect to the same tunnel group who do not have this problem so I think it is related to his pc and not to the ASA firewall.
He receives an error indicating there is a problem with the client driver.So far, we have allowed the AnyConnect VPN agent to interact with the desktop via My Computer>Manager>Services and Applications>services menu.
We checked and the Routing and Remote Access service is not enabled on the PC.I even tried having him connect using the program and the command line program and he always receives the same error that the client driver encountered an errors.I got him to run the DART tool.
View 1 Replies
View Related
Apr 16, 2013
I have a 2wire modem connected to the Internet port of my WRT54GS which is connected to a D link DSS 16+ Fast Ethernet switch. Without the switch, I can connect wired and wirelessly to my WRT54GS. However, when I put connect my any port of my D link switch to ports 1 - 5 of WRT54GS, I loose internet all together either wired/wireless to the router or wired to the D-link switch.I wonder why the IP Address will change as I understand that the switch is just a pass through switch.
View 1 Replies
View Related
Feb 4, 2012
i have been using a WRT54GS LINKSYS ROUTER for 2.5 years problem free until now. All of a sudden i cant connect to the internet through it at all. when i diconnect it and hook my desktop directly to the modem it works but i need the wireless to use my laptop. I have tried everything to get it working again, no dice. when using w7 diag tool it reports back local area connection doesnt have a valid ip config.
View 3 Replies
View Related
Oct 28, 2011
I've been having internet connection problems for the last few days and i usually do just unplugging the router and modem and turning it them back on but that hasnt been doing the job this time, its still connecting but it just says no internet access but it will connect when i connect my laptop to the modem. My router is linksys wrt54gs version 6.
View 6 Replies
View Related
Sep 24, 2011
My router keeps going out, and the only thing that gets me back on is to unplug, replug, then I'm good but only for about 20 minutes.
View 2 Replies
View Related
Nov 18, 2011
So my desktop is wired to my WRT54GS v7 router, which is connected to a DSL modem. The desktop has full connection and gets Internet. However, whenever I try to connect devices to the wireless network, they can connect to the network, but they don't get any Internet. I've also updated the firmware, too.
View 9 Replies
View Related
Sep 28, 2011
I have used the router successfully since purchasing it in April, 2008. The router is connected via cable to the main computer and there are two other computers in the home that are/were used with it. However I noticed that whenever I looked into the available networks in the 'sub' computers it was described as 'unsecured'. I therefore went into the Router [via 192.168.1.1] and amended some settings... forget what they were set at however I changed it to WEP and now shows up as 'secured'.
I now find that I cannot access the internet from the 'sub' [other two wireless] computers and get message 'network did not assign a network address to the computer' if checking 'repair does not restore connectivity... contact network manager. Use the system with Windows XP Professional on Dell Optiplex GX270.
View 9 Replies
View Related
Mar 27, 2013
If I'm outside my home network, I'm getting an error saying router is offline when i use the iPhone smart wifi app on my cellphone service LTE.When I connect using my home connection or wifi, I don't get the error and I'm able to connect to my router E3500.Why is this happening ?
View 7 Replies
View Related
Oct 9, 2010
I have a WRT310N V2 wireless router, with a WMP600N dual-band PCI card in my computer, using Vista 64x. I have had the same set-up for the past year or so, even after moving to a new apt, which I have been in now for 3 months. It has worked perfectly, up till recently. Over the past week however, my router has been dropping the connection, to the point of having to wait for it to show back up in my connections list. I made no changes to my setup, prior to the problems. I am kind of doubting it's my wireless card, as I can still see other routers. I have tried changing the MTU size, the Threshold, made sure the firmware was up to date, etc. I re-installed the drivers for my NIC and even changed ports, just to be on the safe side. I don't know what else to do, except go out and get another router. I have to use wireless, as I have nowhere to run cables at. I had this problem before with a Linksys wireless router, but figured it was due to the extreme amount of bandwidth my game uses online. Ironically, both routers are doing the same thing. They hit lag every 60 seconds almost on the money. I'm a gamer, so this is a huge inconvenience for me.
View 5 Replies
View Related
Apr 5, 2012
I purchased this router a few months ago(wrt54g2 v1.0) when I moved into st louis missouri. My ISP is charter communications. I am using windows 7 64 bit.I had no problems with this router with wired connections, however my wireless devices would drop repeatedly. I updated the firmware to the latest linksys version, but still same issue.After much research online and trying everything I could through linksys, I found a page that someone with the same problem said it could be solved by upgrading to dd-wrt freeware firmware. After much trials and problems, I finally got it installed. However I did not like dd-wrt because it would not allow FTP access no matter what i tried, and would lead to dropouts of wired connetions even though it did fix the wireless.I then decided to revert back to the previous firmware - this is where i think i messed up..I downloaded tftp and a firmware called vxworkskiller, this was supposed to be able to break the dd-wrt firmware which it did, and removed it. I continued to follow the instructions provied to me and was able to then install the linksys firmware but I accidentally upgraded the firmware for the router WRT54GS with the firmware version 7.50.2. This is now dropping both wired and wireless connections VERY frequently. My roomate is not happy as we have to power cycle the modem, router and pc's every couple of hours and sometimes that doesn't even work.I am unable to flash firmware of any version or type anymore, every upgrade fails weither I use the linksys gui, or tftp or any previously working firmware. All fail.
View 5 Replies
View Related
Jul 17, 2006
My lap top and other desktop are able to detect the internet but not my main computer with this router.
View 2 Replies
View Related
Aug 6, 2011
We got a lynksys model at our home. it seems that everything is working the pc's connected with cables are working with internet. The wifi sends out and you can get on it. But internet isn't working with wifi also if it says connected etc.
View 1 Replies
View Related
Apr 30, 2013
I have a few devices I cannot connect to my router or modem but my ps3 and 2 xboxes are connected. I have easy link and I try to add devices to it but it doesn't show me the same options it did before when I added my ps3, and ipod. Now I can't connect my psp or any phone to it, I have the WRT54GS v7.2, those are my only problems with the router nothing.
View 3 Replies
View Related
Jul 2, 2012
I intend to connect a network built around the WRT54GS to Internet by passing through a second network who is already connected to Internet through the Orange Livebox-2 (French).I have a traditional home network with basic shares on the French Orange Livebox-2 and its WiFi.The computers runs XP - Pro .My ADSL access is normally through the Livebox-2 (Range of addresses 192.168.1.xxx) and I run DHCP Working Group "WORKGROUP".It works without problem (Internet and VoIP telephony) except the Wifi of the Livebox which is known as poor (range and stability).I also manages a small "pedagogical workshop" for the school who visit my mill.This network is available to my young visitors based on a (tower) server containing the libraries and teaching materials and its printer. It’s XP - Pro machine. and to allow a maximum of two laptops be WiFi connected.The second network is built around the Linksys router (wich integrates no modem, simply a router).The WRT54GS router (rev 6) whose firmware is original Linksys up to date.I am setting the two Wi-Fi (Livebox 6 Cnl) and Cnl 4 on WRT54GS and different keys (this is manageable without difficulty).It has its server DHCP and Wi-Fi to connect their machine.What about the name of this second network group ? Currently “WORKGROUP” as well.I am setting a range different on the router WRT54GS (192.168.2.xxx) and enabled the DHCP.This "educational" network works perfectly when alone and separated from the "home" network and doesn’t get connected to Internet…I want to connect this router Linksys WRT54GS rev6 cascading through the Livebox-2. Share Internet via the Livebox-2 access.What about functionality?What is the connection to setup ?Should it be simple physical connection with a cable between the yellow ethernet port "2" of the Liveboxbox and the "Internet" connector of the Linksys router? Is this a good track to explore? I have searched extensively on the Internet but found proposals who are very old and refer to old Livebox... I did test and is not satisfactory...
View 1 Replies
View Related
Nov 5, 2011
I've looked through the forums and FAQs and haven't seen anything that resolves my issue. I recently moved from the US to Japan. I had my WRT54GS set up in the States and the network worked fine. When i got here, i set it up, hard reset the router and set up a new network.
I can access the internet when connected through the router via ethernet cable, but I cannot connect any of my wireless devices. Easy Link Advisor says "internet connection is not working" but it is. I have two computers connected via cable and they both work so it is not an issue of my ISP allowing multiple IP addresses.
My wireless devices (XBox, PS3, laptop) can see the network but cannot connect through to the internet. I also just noticed that the "wireless mode" according to the EasyLink Advisor says "disable", however the wireless settings on my 192. server webpage is set to "mixed" and seems to be correct in all settings to be on.
View 9 Replies
View Related
Oct 20, 2012
I have a WRT54GS V7 that I have been running for a few years now with no problems until today.My wife used the internet from her laptop through the day but this evening after she moved to the bedroom and booted up the laptop, she found there was no internet connection. I tried what I know in cases like these, unplugging the router or modem for brief periods of time to try and get things going again but to no avail. So I tried using the Easylink Advisor which basically suggested the same process.
At this point, my internet connection is coming in from the cable just fine. I have access on the desktop which is wired and works with no problems. The modem and router lights are both signaling that everything is fine but no wireless internet coming from the router.
Using the desktop I tried looking for some solutions and tried resetting the router. I ultimately called customer support but being out of warranty they wanted too much although she suggested that I needed to reconfigure the router since I had reset it. I followed the online instructions for reconfiguring but still have gotten nowhere.
View 1 Replies
View Related
Jul 27, 2011
I've recently been gifted with a WRT54GS v.2 which came from a family member who upgraded their wireless router and therefore passed this one along to me. It was working perfectly for them, but not me.
I've tried using the setup CD and doing a manual setup, but no internet connection is detected. I must confess to being a total wireless router newbie, this is my first one, so I am stumped as what to do next. I've looked at the FAQ's and through the forum as well, but I just don't know what might apply to my situation and as I am not very well versed in the terminology, I tend to get lost.
View 8 Replies
View Related
Feb 21, 2012
I have a Linksys WRT54GS vers 7.2 Router on an iMac OS X Leopard. The other day I was in the middle of downloading an upgrade for the router when Firefox gave me this message: "Firefox can't find the server". I was no longer able to access the internet, and the router's green power light was left flashing. It flashed for over 24 hours. I tried unplugging the router and shutting down the computer, then plugging in the router and turning on the computer. (I don't have a modem.) The light was still flashing. I tried pressing the logo button for 5 seconds. Still flashing. Tried pressing the reset button in the back. Still flashing. 'I can't get on the internet or into the router. Linksys live chat gave me a link to "Upgrading the router’s firmware using the TFTP utility", which involves a download, but I can't download anything because I can't access the internet.
View 8 Replies
View Related
Jan 5, 2011
Hard wired network (15 workstations.) I had a dsl modem connected to my network switch and linksys wrt54gs router connected to that modem. All hard wired workstations had internet access AND there was a wireless internet connection. With any wifi device I could access the internet.I switched from dsl to comcast. All hard wired work stations still have internet. but when I plug my wireless router into the modem (comcast business IP gateway) there is no wireless internet connection. The hard wired workstations can still get online and there IS a wireless network, but it does not allow internet access (page cannot be found etc.)
Comcast says it absolutely should work. Linksys says it requires simple reconfig of router settings (reset router, clone mac address.) I have read knowledge base articles from linksys and followed each step. The lan ports of the modem are all working if I connect to them directly with a laptop and cable. I have reset router multiple times, cloned mac address, dhcp release/renew.
My physical connections are correct. In the router set up utility, I can see the mac adrdress and ip address but can't tell if the IP is from the modem or the router. Default gateway is always 192.168.1.1 in the router AND in any workstation ipconfig screen. Ip addresses are 192.168.1.xx in ipconfig at any workstation AND in the router set up status.
I cannot access internet via router even if plugged directly into it. It is as if the router is not getting the correct information from the modem. However, it worked perfectly with the DSL modem the day before we changed.My workstations are all hard wired and work. I simply want to have Wi-Fi also... for phones and laptops w wireless etc.
View 8 Replies
View Related
Apr 9, 2013
Model wrt54gsWindows xpI got the wireless network setup and password protected and my computer and phone can sign o the wireless network, but when I try to go to a website it doesn't work. If I connect te computer directly to the modem then it works.
View 2 Replies
View Related
Apr 4, 2012
I've been using a Linksys WRT54GSV4 router since November 2005, and have rarely had any problems with it. Now today after the power went out, devices cannot connect to the internet.My PC connected directly to the cable modem results in internet connectivity.My PC connected to the router allows router access through 192.168.1.1.My PC connected to the router can NOT access the internet or otherwise get out to the modem.WiFi devices in the house cannot connect to the internet, but can still access the router through 192.168.1.1.Swapping cables results in the same behavior, so the PC can connect to the modem with either cable, and the computer can connect to the router with either cable.
View 1 Replies
View Related
Mar 2, 2013
I have a WRT54GS router, and starting today I am completely unable to access the internet through it. If I connect my computer directly to my modem, I can access the internet, but if I try to connect through the modem, all I get is "DNS server not responding".I've tried changing the DNS server address on the router configuration page, but it doesn't work.
Here's what my ipconfig /all shows:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : HomePCPrimary Dns Suffix . . . . . . . :Node Type . . . . . . . . . . . . : HybridIP Routing Enabled. . . . . . . . : NoWINS Proxy Enabled. . . . . . . . : No
[code]....
View 3 Replies
View Related
Jan 17, 2011
In the house I am using a WRT54G as the main router connected to the ISP. I have run a Cat5E wire from the house to the shop 110 feet away and connected a WRT54GS to the Cat5E (a LAN Port). I turned off DHCP and assigned it a static IP from the House WRT54G. Local wired connections work great, problem is it will not offer up a wireless IP address to wireless clients.I wired up a cross over cable and actually plugged it into the WAN port, it actually picked up and offered wirelessly the House IP address range, however, could not get to the internet. Why I can't wire to WRT54G and a GS together and expect a wireless connection at the shop site?
View 2 Replies
View Related
Aug 8, 2011
My Linksys WRT160N wireless router stopped working all of the sudden. When I connect to the internet wirelessly my laptops say I have full signal but "No Internet Access." None of the 4 wired ports on the back of the WRT160N router give me wired internet. The only way I can get internet is to connect the wire to my internet modem
View 5 Replies
View Related
Mar 26, 2012
I have an E2000 (2 yrs old) that is not connecting to the internet.It is a slave to a BEFSR81 which controls the DNS.I am able to connect to other computers on my home network, so I know the wirelss is working and the cables are all good. I know that I can plug my laptop into the port on the hard wire router that the wireless was plugged into and I can get internet. So the only thing I can think of is the inernet is being blocked at the E2000.
View 1 Replies
View Related
Nov 19, 2012
My WRT54GL Linksys modem has me stumped, it will not connect no matter what I try. it worked fine until just recently after a power outage; everything seems to be working perfectly fine hardware wise; the router shows a solid power led and network activity on WLAN, Ethernet, and Internet. I've tried soft resets and factory reset, clearing my caches, releasing/renewing IPCONFIG.
The peculiar part is that it is not letting me access the web config at 192.168.1.1 while connected with the modem, however if I plug the router directly to my PC's ethernet port I can access the config; Itried updating the firmware this way but it didn't solve the problem. I have no more ideas.
Below is the IPCONFIG information with the modem and router hooked up:
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller #2
Physical Address. . . . . . . . . : 00-04-4B-17-C2-1A
[Code].....
View 2 Replies
View Related
Jan 14, 2013
I am running the most recent firmware 1.1.28 released on Jan 2nd(ish) 2013 and if I try and access or configure my external Segate Freeagent 1.5 GB it essentially crashes my router whereby I cannot reach the internet nor the Admin console. I have to power cycle to be able to connect?
View 9 Replies
View Related
Jul 19, 2010
I have A a linksys WRT54G2 and am trying to connect it to my wii. I had my Wii search for an access point And it found my router. I put in my password and it was accepted but I am still Not Connected to the internet.
View 3 Replies
View Related
