Linksys E1200 Router Will Not Assign IP Address To WMP11 Computer?

May 18, 2011

I recently switched cable companies and was given a Linksys E1200 wireless router to connect to the internet. The router works fine with all of my laptops but not with my desktop. The desktop has a WMP11 wireless PCI card. I have had trouble using this card in the past but have always managed to solve connectivity issues. This time, I am unable to connect to the internet. Although I can detect the network signal, the network will not assign my computer an IP address. Also, when I first switched routers, I got a message saying I did not have the proper certificate to connect to the network

View 1 Replies


ADVERTISEMENT

Wireless Router Won't Assign IP Address To Computer

Jul 16, 2012

There are 6 computers in our home network. It happens every few months or so that router would not assign valid IP address to one of the computers. So, most of the time everything works well, but there comes a moment when one of the computers (but not others) can't get valid IP address.We try turning off and then on the router and it solves the problem most of the time. But, there are cases when turning off and on the router won't solve the problem.

View 3 Replies View Related

Linksys Wired Router :: RVL200 / RVS4000 Possible To Assign Public IP Address As Local IP Address?

Feb 28, 2011

Is it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?

View 1 Replies View Related

HP 510 Laptop - Network Did Not Assign Address To Computer

Dec 6, 2011

I have an HP 510 laptop running windows xp. Wherever i go, i am able to connect through wifi with a password except for where i live. I have had no problems connecting anywhere else. All other laptops and pc's connect through the network i cant access. I get a 'limited or no connectivity' message with details displaying either 'network did not assign a network address to the computer', 'cannot connect to the internet' or 'cannot renew ip address. I reviewed a few older posts and have tried ipconfig/release, ipconfig/renew, ipconfig/all to no avail. i also tried netsh ip reset reset.log and netsh windows catalog(or something along those lines) from the earlier post i read, still nothing. I do notice that when i go to properties the wep password always reverts to one i did not enter, and once in a great while when i re-enter it the icon will show 'connected to network, excellent signal strength' but Internet Explorer says not able to connect. I cant seem to figure out why i connect fine everywhere else, and why every other 'guest' computer connects to this network.

i connect using Intel(R) PRO/wireless 2200BG under properties>general under properties>wireless networks>association use windows to config is checked under properties>network>properties the network authentication is 'open' and data encryption is set to 'wep' while the network key reverts to something i did not enter. key provided is not checked under properties>wireless networks>authentication 'enable ieee 802.1x authentication for this network is not checked

View 5 Replies View Related

Linksys Wireless Router :: EA4500 - Assign A DNS Address For A DHP Reservation?

Dec 21, 2012

On my EA4500 i've given my Sony Google TV Box (connected by wifi N) a static ip address under "DHCP Reservations". However is there any way to add a DNS server address to this reserved IP so that only the Google Box is affected by the DNS, all the other connected devices remain unaffected? Presently i enter the required DNS address in the google box but i would prefer to do it on the EA4500. I'm using the latest Cisco Cloud fw on my router.

View 3 Replies View Related

Linksys Wireless Router :: E2500 - Assign Static IP To Mac Address

Mar 5, 2012

I"m having one problem though. On my old router it had a feature to assign a static IP to a mac address.
 
So that computer would always get 192.168.10.101 as the IP Address.
 
How do I do it on this router?

View 3 Replies View Related

Linksys Wireless Router :: WRT610N - Assign Unique Address To Each Devices?

Jun 14, 2012

2 of my attached wireless devices have the same IP address different MAC address. How can I assign unique address to each of the devices

View 1 Replies View Related

Linksys Cable / DSL :: WRT160N Router Can Assign To Specific MACs Their Own IP Address

Jan 13, 2010

I am thinking about purchesing this router. But I need know if this router has DHCP reservation function. If router can assign to specific MACs their own IP adress. I had WRT160N for a week, but my ISP change technology. WRT160N had this function, but I am reading here, that WAG160N not.

View 5 Replies View Related

Linksys E1200 Computer Not Connecting Hardwired Through Router

Feb 19, 2012

I recently purchased a Linksys E1200 router. I have two desktops (Windows XP) hardwired into the router, one of which is not connecting at all.I have talked to Linksys tech support 3 times already and they have not been able to fix the problem. Pinging a website got a request timeout.Pinging the router got a good response.It was properly assigned an IP address, but did not connect through the router.Under Network Connections, it displays as "Connected" but is still not able to access the Internet.

View 2 Replies View Related

Linksys Wireless Router :: E1200 V2 Computer Will Not Connect To Internet

Mar 28, 2013

I have a Cisco E1200, I am wanting it to connect to the net using Etisalat ISP. The computer will talk to the router and all the settings look correct but it will not connect to the internet.The router did a software upgrade that it deemed successful. 

View 9 Replies View Related

Linksys Wireless Router :: Connect Ipad To E1200 As Another Computer?

Mar 26, 2012

I don't want to allow any Guest access to  my network, but I do want to connect my iPad to my network. I've successfully added another computer to the network but the router setup seems to want the iPad to connect only as a Guest .Is there a way to treat my iPad as another  computer (not as Guest) so that it my network recognizes it in the same way it recognizes the second computer (without entering a password)?

View 1 Replies View Related

Linksys Wireless Router :: E1200 Cloning MAC Address But Not PC's

Mar 23, 2013

My ISP requires MAC authentication on the router for internet access. They provide the router, and register that router to their access list.I'm not very happy with the router they provided, so I'm planning to buy a E1200 and clone my current router's MAC address. But when I checked the interface of this router, the mac cloning page has a button saying "Clone my PC's MAC". And in the FAQ page of E1200 it says that the router can automatically capture the MAC address of the PC. Which is not what I want to do.I want to manually input my older router's MAC address into this router to clone it.

View 1 Replies View Related

Linksys Wireless Router :: E1200 - Computer Freezes When Watching Videos?

Apr 26, 2012

Since I've bought a new Cisco router last summer,, a Linksys E1200 (v.1 updated...) (always in the wireless mode), my laptop (Sony, Vaio VGN-NW110D) freezes when I stream videos online or when I use skype video calls. It sometimes freezes for a few minutes (in that case it's just really extremely slow and it sounds like a satanic robot), and then comes back (but does it again a few minutes later. Or sometimes, and this is more frequent with skype video calls, it completely freezes, and I have to reboot the hard way...This never happened to me before and I've been watching videos and video skyping for years. I have windows 7, service pack 1 (32 bits) now . I have windows 7 now, since about the same time I bought the router. But what makes me think its related to the router is that when I'm at work, or at my parents, or sisters, or boyfriend's house, this problem does NOT occure.... I don't know if this information could be relevant, but this does not happen when I make videos calls with skype on my iphone.

View 1 Replies View Related

Linksys Wireless Router :: E1200 Computer Says That Its Connected But Have No Internet Access

Jun 22, 2012

I installed an E1200 wireless router yesterday and everything worked fine. However, I happened to turn off the modem overnight and now my computer indicates (under Wireless Network Connection) that I'm connected, but above (under Currently Connected To) it says that I have No Internet Access. I tried turning off the modem, router and computer and turning them on again in that order, but that didn't work. Do I need to do the set-up again ?

View 5 Replies View Related

Linksys Wireless Router :: E1200 Can't Setup MAC Address Filtering

Sep 12, 2011

The browser-based settings utility for my E1200 can't setup MAC address filtering. I go to the "Wireless MAC Filter" page and enable MAC filtering.When I click the “wireless client list” button, a new window opens saying “IE cannot display the webpage”. This always happens when I have a wireless connection active.When there are no active connections, then IE properly displays the MAC address table, but it is empty since there aren't any computers connected to the router.

View 5 Replies View Related

Linksys Wireless Router :: E1200 Can't Acquire IP Address From Cable Modem

Apr 9, 2013

Reset to factory defaults. DHCP turned on. Status page shows black for router IP, gateway, and DNS addresses. Powered router+cable modem on/off multiple times already. I also have another wifi router (WRT120N) and it works fine.
 
Pretty simple connection. Just a ethernet cable between the cable modem and E1200 internet port (Cable modem <---> E1200)

View 2 Replies View Related

Linksys Wireless Router :: Port Forward With E1200 / IPv4 Address

Apr 22, 2013

I'm trying to set up a minecraft server i have the correct ipv4 adress and port but for some reason its still closed?

View 7 Replies View Related

Linksys Wireless Card Wmp11 Will Not Connect To Internet?

Sep 7, 2011

I am trying to connect to the internet with a linksys wmp11 wireless running windows xp. I canconnect to the net work by I cannot connect to the internet. When I am looking at the properteis for the card I see the the card has dhcp inabled and I cannot disable.

View 4 Replies View Related

How To Assign Public Ip Address Using Router

Jul 14, 2011

I have a public IP and I want to be able to view my three systems connected to a linksys router from the internet. How can configure the router to see three systems with just one Public IP address whenever I am on the internet?

View 5 Replies View Related

Linksys Access Point :: Connecting To Network That Is TKIP Secured With WMP11 Wireless PC Card

Nov 8, 2006

,I was having problems connecting to a network that is TKIP secured with a WMP11 Wireless PC card. I'm wondering if this is possible.

View 9 Replies View Related

Belkin Routers :: N450 Router Will Not Assign The DNS Server Address

May 4, 2013

It took a while of troubleshooting since I've never ran into this problem with my wireless router before. But finally I figured out that my router will not assign the proper DNS server addresses when assigning through DHCP. I upgraded from 2.10.02 and still the same issue.

View 1 Replies View Related

DSL-320B No IP Address Given To Router Until After Cloning MAC Address From Another Computer

Jun 1, 2012

We have an ADSL connection and use a D-Link DSL-320B modem. We have a D-Link DIR-120 router connected to this modem. This has worked perfectly fine up until today when we disconnected the router and connected a computer (call it A) directly to the modem because it was getting an unusable connection through the router for some reason. We later also performed a factory reset on the DIR-120 router.

Unfortunately, after the above steps the router did not receive any IP address (through DHCP) from the ADSL connection anymore. During my attempts to debug this I noticed that my laptop (call it B) didn't get any IP address either (when connected directly to the modem). I noticed the following syslog entries repeating over and over while trying to connect: [code]

At this point computer A could still get a connection just fine tho (when connected directly to the modem).

I then tried to change the MAC address of the router to an arbitrary one (a copy of computer B's MAC address but with the last digit increased by one). The router still did not get assigned any IP address. Finally I tried making the router clone the MAC address of a third computer (call it C). C has never been connected directly to the modem. Doing this worked. After cloning the MAC address of computer C the router is immediately assigned an IP address and the internet connection works as it did prior to all this.

Now, my question is, why would computer B and the original MAC address of the router not be able to get an IP address while two other computers worked just fine? Why would changing to an arbitrary MAC address not work while cloning the MAC address of another computer did? Could the router's MAC address have been blocked by the ISP for some reason (and what could cause this)?

but my situation seems more like a blacklisting of some MAC addresses rather then allowing just a single MAC address.

View 1 Replies View Related

Assign Wrong Mac Address?

Jul 16, 2011

I have a 2003 server that is doing something wrong. When I show the mac address table I can see that the server is assigning a bad mac address to several IPS. The server assign a non-existent mac address to some IPS for this reason the server stobut I would like to solve the problem

- I ran my antivirus an no virus was found.

- I updated the network driver.

View 4 Replies View Related

How To Assign A Valid IP Address

Mar 4, 2012

I have a Compaq Presario 6000. The DHCP server is not getting a valid IP address. How do I troubleshoot?

View 2 Replies View Related

How To Assign Ip Address In Windows Xp

May 6, 2011

How to assign ip address in xp

View 2 Replies View Related

Can't Assign Internet Address?

Sep 30, 2012

I had no trouble getting connected to the internet a couple of months ago. Then the signal got weak. I have a better antenna now and the network shows 5 bars but I cannot connect. It is an open, unencrypted connection. Wi-Fi Inspector gives this info[CODE]

View 19 Replies View Related

Unable To Assign The Ip Address?

Jul 13, 2011

I was using an IP address at one of client side and i got an IP address conflicted error and i changed the ip, Hence when i am searching that where does it consume on other systems i don't get the location & i need to use the conflicted one IP address so how can i know that which system does it using, i manually checked all systems i did not get, the ip address is gets ping but unable to get its location.

View 2 Replies View Related

Cisco WAN :: 5510 - Assign Public IP To Computer

Nov 20, 2011

I have a peculiar situation where I need to assign a public ip to a computer without going through firewall (for testing purpose).
 
I have the leased line going through a 3750 switch to the ASA 5510(15.240.1.2/30) belonging to vlan 999. ASA has default route going to 15.240.1.1/30(ISP).
 
I have different public ip range for LAN and WAN My WAN ip is 15.240.1.0/30, LAN ip range is 15.240.2.24/27 nated by ASA..
 
I want to connect the PC to the switch port belonging vlan 999 and ip address of 15.240.2.26/27.
 
If yes, what will be the gateway for the computer?

View 3 Replies View Related

Have DHCP Assign SNMP Address?

Oct 21, 2011

I know DHCP can assign more than just address, mask, and gateway. It can also assign a hostname, and DNS. Does anybody know if it can also be used to assign an SNMP address?

View 6 Replies View Related

Can't Assign An IPv4 Address To A Port

Aug 15, 2012

I understand you can't assign an IPv4 Address to a "port". But here's my issue. I have two network cables attached to a managed switch, the location of the two cables are very important. Two computers attached to the said cables.I would like to communicate with one of the computers on PORT 1 and PORT 2, regardless of what computer is plugged into them. They get there IP's via DHCP, and a static IP wont work - as the computer plugged into PORT 1 or 2 may be different.So. I have two ports on the switch that I always want to communicate with the computer on the other end. But I don't (will not) always know the IP address of the computer(s) connected.

View 12 Replies View Related

Cisco :: Assign An IP Address To A VLAN?

Jun 16, 2012

I know that a default gateway is used to log in remotely, but what is the purpose of the IP address on a VLAN?

View 3 Replies View Related

Cisco WAN :: Using CCP To Configure 881 - Cannot Assign WAN Address

Mar 21, 2012

I'm using CCP to configure my Cisco 881, I need to assign my IP address range to the WAN interface (176.35.224.112/29), however everytime i enter the IP Address with a /29 subnet mask or indeed one of the usable addresses with a /32 I'm told I need to "Enter a valid IP address".I have also attempted to set the interfaces IP address via IOS directly and was also told the address was incorrect.

View 1 Replies View Related

No Internet Connection When Assign Static Address

Apr 20, 2011

I have what I feel is sort of a strange issue. When I have systems on my home network get their IP from DHCP, they can get to the internet just fine. But it seems that when I assign a static address, they have local network access only, and will not get a connection to the internet. My windows 2008 server is the big problem with this one.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved