Wireless Router Won't Assign IP Address To Computer
Jul 16, 2012
There are 6 computers in our home network. It happens every few months or so that router would not assign valid IP address to one of the computers. So, most of the time everything works well, but there comes a moment when one of the computers (but not others) can't get valid IP address.We try turning off and then on the router and it solves the problem most of the time. But, there are cases when turning off and on the router won't solve the problem.
View 3 Replies
ADVERTISEMENT
May 18, 2011
I recently switched cable companies and was given a Linksys E1200 wireless router to connect to the internet. The router works fine with all of my laptops but not with my desktop. The desktop has a WMP11 wireless PCI card. I have had trouble using this card in the past but have always managed to solve connectivity issues. This time, I am unable to connect to the internet. Although I can detect the network signal, the network will not assign my computer an IP address. Also, when I first switched routers, I got a message saying I did not have the proper certificate to connect to the network
View 1 Replies
View Related
Dec 6, 2011
I have an HP 510 laptop running windows xp. Wherever i go, i am able to connect through wifi with a password except for where i live. I have had no problems connecting anywhere else. All other laptops and pc's connect through the network i cant access. I get a 'limited or no connectivity' message with details displaying either 'network did not assign a network address to the computer', 'cannot connect to the internet' or 'cannot renew ip address. I reviewed a few older posts and have tried ipconfig/release, ipconfig/renew, ipconfig/all to no avail. i also tried netsh ip reset reset.log and netsh windows catalog(or something along those lines) from the earlier post i read, still nothing. I do notice that when i go to properties the wep password always reverts to one i did not enter, and once in a great while when i re-enter it the icon will show 'connected to network, excellent signal strength' but Internet Explorer says not able to connect. I cant seem to figure out why i connect fine everywhere else, and why every other 'guest' computer connects to this network.
i connect using Intel(R) PRO/wireless 2200BG under properties>general under properties>wireless networks>association use windows to config is checked under properties>network>properties the network authentication is 'open' and data encryption is set to 'wep' while the network key reverts to something i did not enter. key provided is not checked under properties>wireless networks>authentication 'enable ieee 802.1x authentication for this network is not checked
View 5 Replies
View Related
Feb 28, 2011
Is it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?
View 1 Replies
View Related
Dec 21, 2012
On my EA4500 i've given my Sony Google TV Box (connected by wifi N) a static ip address under "DHCP Reservations". However is there any way to add a DNS server address to this reserved IP so that only the Google Box is affected by the DNS, all the other connected devices remain unaffected? Presently i enter the required DNS address in the google box but i would prefer to do it on the EA4500. I'm using the latest Cisco Cloud fw on my router.
View 3 Replies
View Related
Mar 5, 2012
I"m having one problem though. On my old router it had a feature to assign a static IP to a mac address.
So that computer would always get 192.168.10.101 as the IP Address.
How do I do it on this router?
View 3 Replies
View Related
Jun 14, 2012
2 of my attached wireless devices have the same IP address different MAC address. How can I assign unique address to each of the devices
View 1 Replies
View Related
Jul 14, 2011
I have a public IP and I want to be able to view my three systems connected to a linksys router from the internet. How can configure the router to see three systems with just one Public IP address whenever I am on the internet?
View 5 Replies
View Related
May 4, 2013
It took a while of troubleshooting since I've never ran into this problem with my wireless router before. But finally I figured out that my router will not assign the proper DNS server addresses when assigning through DHCP. I upgraded from 2.10.02 and still the same issue.
View 1 Replies
View Related
Jan 13, 2010
I am thinking about purchesing this router. But I need know if this router has DHCP reservation function. If router can assign to specific MACs their own IP adress. I had WRT160N for a week, but my ISP change technology. WRT160N had this function, but I am reading here, that WAG160N not.
View 5 Replies
View Related
Nov 7, 2012
How do i get the 12.4 code to assign a dhcp address to my ethernet interface from my server? I deleted the default config on the 1141 and searching has not turned up anything useful.
View 1 Replies
View Related
Jun 1, 2012
We have an ADSL connection and use a D-Link DSL-320B modem. We have a D-Link DIR-120 router connected to this modem. This has worked perfectly fine up until today when we disconnected the router and connected a computer (call it A) directly to the modem because it was getting an unusable connection through the router for some reason. We later also performed a factory reset on the DIR-120 router.
Unfortunately, after the above steps the router did not receive any IP address (through DHCP) from the ADSL connection anymore. During my attempts to debug this I noticed that my laptop (call it B) didn't get any IP address either (when connected directly to the modem). I noticed the following syslog entries repeating over and over while trying to connect: [code]
At this point computer A could still get a connection just fine tho (when connected directly to the modem).
I then tried to change the MAC address of the router to an arbitrary one (a copy of computer B's MAC address but with the last digit increased by one). The router still did not get assigned any IP address. Finally I tried making the router clone the MAC address of a third computer (call it C). C has never been connected directly to the modem. Doing this worked. After cloning the MAC address of computer C the router is immediately assigned an IP address and the internet connection works as it did prior to all this.
Now, my question is, why would computer B and the original MAC address of the router not be able to get an IP address while two other computers worked just fine? Why would changing to an arbitrary MAC address not work while cloning the MAC address of another computer did? Could the router's MAC address have been blocked by the ISP for some reason (and what could cause this)?
but my situation seems more like a blacklisting of some MAC addresses rather then allowing just a single MAC address.
View 1 Replies
View Related
Jul 16, 2011
I have a 2003 server that is doing something wrong. When I show the mac address table I can see that the server is assigning a bad mac address to several IPS. The server assign a non-existent mac address to some IPS for this reason the server stobut I would like to solve the problem
- I ran my antivirus an no virus was found.
- I updated the network driver.
View 4 Replies
View Related
Mar 4, 2012
I have a Compaq Presario 6000. The DHCP server is not getting a valid IP address. How do I troubleshoot?
View 2 Replies
View Related
May 6, 2011
How to assign ip address in xp
View 2 Replies
View Related
Sep 30, 2012
I had no trouble getting connected to the internet a couple of months ago. Then the signal got weak. I have a better antenna now and the network shows 5 bars but I cannot connect. It is an open, unencrypted connection. Wi-Fi Inspector gives this info[CODE]
View 19 Replies
View Related
Jul 13, 2011
I was using an IP address at one of client side and i got an IP address conflicted error and i changed the ip, Hence when i am searching that where does it consume on other systems i don't get the location & i need to use the conflicted one IP address so how can i know that which system does it using, i manually checked all systems i did not get, the ip address is gets ping but unable to get its location.
View 2 Replies
View Related
Nov 20, 2011
I have a peculiar situation where I need to assign a public ip to a computer without going through firewall (for testing purpose).
I have the leased line going through a 3750 switch to the ASA 5510(15.240.1.2/30) belonging to vlan 999. ASA has default route going to 15.240.1.1/30(ISP).
I have different public ip range for LAN and WAN My WAN ip is 15.240.1.0/30, LAN ip range is 15.240.2.24/27 nated by ASA..
I want to connect the PC to the switch port belonging vlan 999 and ip address of 15.240.2.26/27.
If yes, what will be the gateway for the computer?
View 3 Replies
View Related
Apr 21, 2012
I am trying to add a new computer to my wireless statione access list but have not been successful. I got the ip address of the computer i was trying to add, my issue is how to add it to the list. i tried adding the details and filling in the device name and MAC address but kept getting the error message "invalid MAC address.please enter again.
View 1 Replies
View Related
Oct 21, 2011
I know DHCP can assign more than just address, mask, and gateway. It can also assign a hostname, and DNS. Does anybody know if it can also be used to assign an SNMP address?
View 6 Replies
View Related
Aug 15, 2012
I understand you can't assign an IPv4 Address to a "port". But here's my issue. I have two network cables attached to a managed switch, the location of the two cables are very important. Two computers attached to the said cables.I would like to communicate with one of the computers on PORT 1 and PORT 2, regardless of what computer is plugged into them. They get there IP's via DHCP, and a static IP wont work - as the computer plugged into PORT 1 or 2 may be different.So. I have two ports on the switch that I always want to communicate with the computer on the other end. But I don't (will not) always know the IP address of the computer(s) connected.
View 12 Replies
View Related
Jun 16, 2012
I know that a default gateway is used to log in remotely, but what is the purpose of the IP address on a VLAN?
View 3 Replies
View Related
Mar 21, 2012
I'm using CCP to configure my Cisco 881, I need to assign my IP address range to the WAN interface (176.35.224.112/29), however everytime i enter the IP Address with a /29 subnet mask or indeed one of the usable addresses with a /32 I'm told I need to "Enter a valid IP address".I have also attempted to set the interfaces IP address via IOS directly and was also told the address was incorrect.
View 1 Replies
View Related
Apr 20, 2011
I have what I feel is sort of a strange issue. When I have systems on my home network get their IP from DHCP, they can get to the internet just fine. But it seems that when I assign a static address, they have local network access only, and will not get a connection to the internet. My windows 2008 server is the big problem with this one.
View 10 Replies
View Related
Jan 20, 2013
I am trying to assign a static IP address for network adaptor as i am going to be using it to install Active Directory on VMWare Worksation. I was told that if i went into Device Manager within my worksation then Advance > Locall Administered Address and set a static IP, when i install AD and it asks to whether set a static or dynamic IP it would continue the install process. However, after setting a static ip it did not, can somebody tell me how i can set the correct IP address for me to continue instaling AD.
View 12 Replies
View Related
Aug 20, 2011
I've been using the Dir-655 for 2 or 3 years with my old Xbox 360 and an external G wireless adapter. Everything was working perfectly until I got the dreaded Red Rings Of Death the other day. I replaced the Xbox with a new Slim version with built in N capable network adapter.
After more than 10 hours of trying a variety of "fixes" I found from MS and in this forum, I am still at square 1.
Hardware Version : A3
Firmware Version : 1.32NA (this is listed as Live compatible by Microsoft)
802.11 Mode : Tried N only, G only and mixed 802.11n and 802.11g
Enable Auto Channel Scan : Checked
Transmission Rate : Best (automatic)
Channel Width : Auto 20/40
Visibility Status : Visible
Security Mode : WPA-Personal Also tried WEP
WPA Mode : Auto (WPA or WPA2) Also tried WEP
Cipher Type : TKOP and AES
I tried assigning an IP manually from the Xbox. But, no matter what I do, the router will not accept it. It is especially frustrating that the Xbox is visible to the unit. It simply will not assign an IP to it under any circumstance.
If you read the sales hype promoting the Dir-655, you will see a lot of nonsense about it being great for gaming. Given that, you'd think a simple solution would have been found and posted for this issue by now. Surely, end users shouldn't be trying 100 different possible "fixes", none of which work, at this late stage of the firmware upgrades. If I sound a tad fed up, it's because I am. After the expense of the new Xbox, it appears I now have to junk my router too.
Here is the status screen taken when it was in mixed mode. Changing it to 'G Only' didn't make any difference:
View 12 Replies
View Related
Mar 25, 2011
I am configuring ASA 5510.
My ISP given /28 pool of public IP's. So i had total 14 available IP addresses.
I configured one IP to the my firewall outside interface. I want assign remaining IP's to the my Servers, which are located inside to the firewall.
View 2 Replies
View Related
Jan 8, 2013
I have a n150 and it only allows private ip addresses for the lan setup. Is there anyway to assign a public address? I need to have the DHCP use a public range and I can't do that unless I can set the router to a public ip.
View 2 Replies
View Related
Jul 19, 2012
I have just purchased a SG300-28P switch I am using a GUI to do my config. I cant create VLANs just fine on this but I can not assign IP address to the VLANs.
I just want to have a Data and Voice VLAN on this I am planning on leaving data on VLAn 1 but I can't seem to find an option to assign an IP address to my voice vlan.
For some odd reason I cant access this switch using a console port.
View 2 Replies
View Related
Sep 3, 2009
DHCP enabled with default settings. Dynamic IP range from 192.168.0.100 - 192.168.0.199.Router shows laptop with 192.168.0.199 however when I check the IP on laptop I have 192.168.100.10 and both laptops are connected on my SSID with 90% signal strenght.
View 4 Replies
View Related
Jan 5, 2013
how do I MANUALLY assign ip address to devices connected to my n300
View 1 Replies
View Related
Apr 19, 2012
I have a cisco 878 router and I can’t assign ip address to it’s fast Ethernet interface. When I assign ip address give me this message: “you can not assign ip address to layer 2 interface”.
But I can not understand why give me this alert when I use a layer3 device?!
View 3 Replies
View Related
Feb 4, 2013
I have a RVS4000 router with DHCP enabled and in router mode.
The LAN is 192.168.2.x. The RVS4000 static IP address is 192.168.2.8
The router is not the RVS4000 and is at 192.168.2.1
The RVS4000 dhcp is assigning it's clients a default gateway of 192.168.2.8 instead of what I want 192.168.2.1. How can I get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?
View 2 Replies
View Related
