Linksys Wireless Router :: Wrt610n Unable To Access Web Setup From 4 Different Windows 7
Feb 22, 2012
I'm unable to access the web setup screen from 4 different windows machines running IE 9 or Firefox (various combinations of wireless, wired, etc.). When I get to the certificate error and hit the "yes, i understand, continue", it comes back with a 'can't be reached' page and looking into the details says the 'connection was dropped'. However If I connect from a MacBook / safari, I'm able to reach the page fine (and admin the router).
Using a wrt610n.I am connected to the router, the ip address hasn't changed, the password hasn't changed.I can use the router & connect to the internet.I have the router set to require HTTPS, but switching it to allow HTTP doesn't work. Both Wired & Wireless Win 7 / IE9 machines can't connect.Tried setting the router ip address to 'trusted' zone in IE. Tried setting the router ip address to the 'compatibility' mode in IE. Tried using latest version of Firefox with the same results.
View 3 Replies
ADVERTISEMENT
Aug 23, 2011
I cannot access the WRT610n setup/management pages wirelessly from my Macbook using safari. I can access the router via wireless from iPhone and PC and I can access it from the Macbook via ethernet cable.
When I try to access the router from the Macbook I just get "Contacting..." in the Safari status line and eventually it times out.
I can access the internet using Safari via WRT610n wireless. The only page I can't access is the router's management page.
View 7 Replies
View Related
Aug 17, 2011
best setup is for a Cisco Linksys WRT610N V2 with a Cisco EPC 3208 connected to UPC 60Mb cablenetwork?I have had the WRT610N connected to another modem before so I believe I have reached the limits out my local network.But I definetly want to ensure I don't lose anything between router and my internetprovider.
View 3 Replies
View Related
May 12, 2012
Just a day or two ago I was able to do what the title says, didn't make any adjustments to my E2000 while in it, had to find something though.Anyhow, connecting to http://192.168.1.1 results in "Unable to Connect", etc. Also tried it in IE9, Firefox Beta is my primary, and it still didn't work. Tried using Cisco Connect and it says it cannot connect to my router. I am wired to my E2000, which in turn is wired to my DSL modem (Actiontec GT701D-Its firewall not in use). I sitll have full connection to the internet as well as other wireless deveices do in my house.
View 1 Replies
View Related
Aug 5, 2011
I am finally duffing my WRT 610N (N=Never consistent in performance) main router and WRT54G that I am using up in my shop as an expander. Now I am going to a E4200 Main Router and E3000 for my secondary router (Truthfully a dual band expander).
Am I going to just simply Flash my 610 to default , disconnect it and pack it away , Setup my new E4200 , Plug in my E3000 into port 1 and go about giving it a separate IP Addy? Or can I expect a **bleep**? Any setup tips?
Wirelessly I am running 2 laptops , a PS3 , Xbox 360 , Epson printer , a picture frame and Samsung Blue Ray and TV, and on occasion 2 android phones. On the Wired side (Ethernet) I have a Sling Box , a Desktop , and the router up in the shop. This is the normal load and never everything all at once (Although it has been done).
View 5 Replies
View Related
Jan 3, 2012
I have a WRT610N which does not allow me to connect any new devices to the wireless network. This is a recent problem as I have been able to connect new devices before. Devices on the wireless network, those that have been on the network, are able to disconnect and reconnect. Just new devices are excluded. Have gone through the admin screens to see if something is amiss but can not find anything.
View 5 Replies
View Related
Dec 29, 2011
I am unable to connect the Asus PCE-N13 (Windows 7 host) to the WRT610N V1.0 N network. The adapter does not see the N network on the LinkSys but there are other N networks in the list. I have updated the latest drivers. My PC Laptop, Macbook Pro, and Xbox 360 connects to the N network.
View 2 Replies
View Related
Jul 13, 2012
I'm having wrt610n and there is an issue, i can login to the config page via http, but using the same computer i'm not able to login there via https but the same time i can login via ipad and the other computer, using the https.i even tried to reset the router settings, but the result was the same, so what PC option can cause it?
View 6 Replies
View Related
Apr 15, 2012
What do I have to do to be able to access the USB drive I plugged into my WRT610N from anywhere, on any computer?
Currently, I just plugged it in, went to \WRT610N in windows explorer, and mapped it as a network drive, adding a few files to try out.
So what do I need to do now to access it from any computer that has internet?
View 1 Replies
View Related
Mar 4, 2012
I am uable to access my files on the USB Storage Device connected to WRT610. Its configured properly. I can see the drive on my network. When I double click it asks for password which I enter and it takes me to the shared folder. But when I click it it says Not Accessible....You donot have the persmission. FTP works fine.I have noticed that on the disk page in the Shared Folder Area when you click on the Summary, the box with Groups With Access is Empty. Whereas on the FTP area in the same summary it clearly mentions the admin group.I have tried every thing including factory reset, hard reset, using new group, new user name etc..The technician from Linsys even spent an hour on my computer and ultimately he gave up and gave me number to contact technical support.
View 1 Replies
View Related
Nov 26, 2011
I have the following network configuration. Linksys E4200 is a main router which connects directly to internet. I have also a couple of WET610 bridges. One of them sends internet through WAP610 (linksys access point - works fine). Another one is still free, so I would like to share internet from the second WET610 through my WRT610n router. I tried to use the same setting as people recommended for direct cable connection of two routers (WRT610n WAN -> main router's LAN; DHCP and NAT on WRT610 turned off, WRT610's IP differs from the main router's IP), but it doesn't work in my case (WRT610n WAN -> WET610 -> wireless -> E4200). Unfortunately WRT610 doesn't see DHCP (so no one of clients receives proper IP, I can't reach my network if I connect to WRT610, I can't reach WRT610 from my network).
View 3 Replies
View Related
Sep 14, 2011
I want to set up access restrictions to one MAC address (my kid's machine) basing on week days. From Su to Th allow less access time while during Fr-Sa afternoons access time should be longer. The question is how to program it in router. I know I can set rules with "allow" and "disable" keyword, but I don't know rules preference. When I set (Su-Th 6-21) allowed access time then router automatically denies defined machine internet access outside this time range. The problem is in the power of thus calculated denying time. I want to allow more access time in weekend, so I hoped if I can simply add "Fr-Sa 6-22:30 allowed access time" rule. I hoped that router will regard explicitly set time over inexplicitly set time but it appears it is not so. What are their preferences/priorieties, iis it possible to stack more rules affecting one MAC address or it is so simple that the first rule "rulez"? Is it possible to set more than one time rule affecting the one machine?
View 4 Replies
View Related
Jan 9, 2011
The Internet Access Policy feature of my WRT610N router doesn't appear to work, at all, zip, nothing, nada. I have setup the feature todeny access to one of my laptops for everyday 24 hours a day, but it can still use the net...
View 5 Replies
View Related
Jul 8, 2011
My main pc is running Windows 7. It is also running MS Windows firewall and anti-virus. It connects fine to the internet via an ethernet connection to the WRT610N.
I am trying to access the internet wirelessly from another pc running Windows XP. The wireless pc indicates it is connected to the network with excellent signal strength. It will not connect to the internet. I can successfully ping the router but it is unsuccessful when pinging an internet address.
An additional wireless pc (WinXP) and my phone (Android) also show connected to the network but will not connect to the internet.
These wireless computers used to be able to access the internet before we moved house. They only thing I think that has changed is the addition of Windows firewall and anti-virus. It may however be something else.
View 1 Replies
View Related
Mar 11, 2012
I entered some QoS settings and now when I load the QoS page I get this Javascript error message in Firefox.Error: missing ) after argument list Source File: [URL]. Line: 100, Column: 47 Source Code: QosList[0] = new QosEntry('0','3','0','Kathy's Mac','3', infor);
Basically, the Javascript chokes on any computer name that you enter that has an apostrophe in it. As a result, I don't have access to add or edit any settings on that page. Seems like a major rookie mistake, especially for a major network device manufacture.
View 1 Replies
View Related
Jan 14, 2011
Have an Actiontec GT704 feeding DSL into a BEFSR41 which is connected to a WRT610N. Can access internet, modem and wired router from desktop. Can access wireless router from laptop. Cannot access internet from laptop or wireless router from desktop. Changed ip address for wireless router to 192.168.2.1 so no conflict with modem or wired router.
View 3 Replies
View Related
Dec 25, 2012
I just moved in to a new place and have connected my Wireless router (WRT610N) to my switch located in the smart panel in the basement (SE2500). Plugging my ultrabook in to the wall confirms that the signal from the switch in the basement is being sent up, however if I plug my wireless router in to the jack and connect to the wireless router I have no internet access.
View 3 Replies
View Related
Jun 22, 2010
I'm very dissatisfied with the range and signal strength of my new WRT610N dual band router compared to the WAP54G Access Point I used before.Can I configure the Access Point as a repeater for the 2.4 GHz band on the WRT610N if I use the WRT610N as a Wireless G router rather than wireless N?
View 5 Replies
View Related
Nov 18, 2011
I 'd like to use the access restrictions capabilities of the WRT610N v2. Unfortunely the "Access Restrictions" menu is missing in the admin GUI; I 've got all the others : "Set -up", "Wireless", "Security", Storage, Applications and Gaming, Administration and Status. I've checked the Firmware already and i'm using the very last one available on the cisco web site. I also noticed that I do not have the "Linksys by Cisco" text on the upper left corner as one can read on user guide but just "Cisco".
View 5 Replies
View Related
Sep 15, 2009
We'r using Linksys CISCO WRT610N and WRT310N wireless router.Our requirment using web access restriction is that we've to Block some website and the corresponding setting is going to be applicable to all users who are accessing internet through this router. The people who are accessing internet through corresponding router should not be able to access web site which are restricted in Router setting. There is the Setting with name "Web Access Control etc etc ".
View 9 Replies
View Related
Apr 28, 2012
Everything was working fine. Changed Nothing on the router. Goes out and now wont broadcast a wireless signal, cant manually reset the router, or get into the settings with 192.168.1.1
Currently I am wired through it with my desktop and its working, but not much else.
View 3 Replies
View Related
Jun 13, 2012
I'm using Linksys WAG200G Wireless modem and connection mode is "Bridge Mode Only", in this mode I'm not getting the 192.168.1.1 setup console and Wifi facility.
View 3 Replies
View Related
Jan 14, 2008
I have been trying to change my password and all the settings on my WRT54G V8 router today because I forgot the password, and I can't seem to navigate the Basic Setup page. I can log in (most of the time) after resetting the router, but whenever I try to click on a different tab (like "Wireless", or "Security") it comes up with the page saying "This Page Cannot Be Displayed." I'd like to be able to put a password on it (which I have successfully done before on this router) because I live in a college dorm and would like to keep my internet from being bogged down by other people using it.
View 9 Replies
View Related
Feb 2, 2007
I'm trying to setup a Linksys wireless-g router model number WRT54G with my DSL connection. I followed the basic instructions that came with the router and towards the end of the process it says detecting network settings with a % bar. The bar fills to 100% and then asks for a password. I've tried the password my DSL company gave me along with various other things like admin etc. After I enter the password I hit enter and it just asks me for the password over and over again.
View 9 Replies
View Related
Apr 18, 2013
I am looking at buying the EA6500 router. However, before I make the investment into buying this router, I need to know some basic information first.
1. I want to setup the EA6500 to accept FTP requests to my Windows Home Server. Yes or No?
2. Remote access to the EA6500, Yes or No? i am aware of the security risks
3. I need to setup Port forwarding on the EA6500. I assume I can?
4. Manage a Kindle Fire and other wireless devices?
View 5 Replies
View Related
Apr 10, 2012
I have 3 desk tops and 1 Laptop. the desk tops are wireless connected via my Xfinity ( cable Modem) and a Trendnet 652- 300 mgb router setup. Recently installed the
Trendnet router ( initially w/o security). I was able to readily connect to and access all pcs to Internet. However, recently went to Trendnet on line site and installed Router password security. Was able to connect and access the Internet on 2 of the 3 desktop pcs as well as the Laptop. However, 1 desktop ( running on Windows XP Professional, 5.1.2600 SVCPK 3, Optiplex G x 60 ) does not permit access to Internet. Once I get to the screen asking for the password ( network key) , I insert same I receive an error message stating "Network key s/b WEP pr a WPA key".
View 4 Replies
View Related
Jul 7, 2012
I have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection.
View 9 Replies
View Related
Aug 14, 2011
Can I use a second linksys wireless router as an access point and can I connect a wired computer to one of its ports?
View 1 Replies
View Related
Apr 13, 2012
I had my router settings in a file on my hard drive so I would not lose them. Just my luck, my hard drive took a giant dump and the restore did not restore 100% and guess which file was among the missing?So I've followed about 15 different "reset" instructions which includes holding the reset button for 10-60 seconds; unplugging the router afterwards for anywhere from immediate to 60 seconds. Obviously, none of those sets of "sage" advice had any influence whatsoever on my router. My "server" is of my own creation:
Core2 Quad Q9550;
8 GB PC28500;
Gigabyte GA-EP45-UD3R;
Windows 7 Ultimate 64 bit SP1.
Cable Modem RCA DCM425.
View 5 Replies
View Related
Oct 3, 2011
I can't access the web based setup via 192.168.1.1. I've had this problem since I swapped to Static Ip from PPPoE. I changed internet provider and now when it type 192.168.1.1 in the browser it says Internet explorer can't show the web page. I've tried Crome and FireFox but with the same result. I followed the instructions in [URL] but to no result.
View 1 Replies
View Related
Feb 1, 2012
When I type the routers IP address in teh browser window, nothing happens so I cannot access the router setup. I have a WRT110. What am I missing. I was able to do that when I first setup the router.
View 1 Replies
View Related
Dec 25, 2009
I purchased a WRT610N router early this month, the wireless network was working completely fine when I first set it up. Today I tried to connect my laptop to my wireless network. The laptop isn't able to connect at all. I also got a Sony PSP which has WLAN on and that saying it cannot detect any access point which would be my router.
View 3 Replies
View Related
Jul 12, 2011
How can I open the Nat for both systems on my single router.
View 2 Replies
View Related
