Linksys Wireless Router :: Setup WRT54G With DSL Connection / Unable To Enter Password
Feb 2, 2007
I'm trying to setup a Linksys wireless-g router model number WRT54G with my DSL connection. I followed the basic instructions that came with the router and towards the end of the process it says detecting network settings with a % bar. The bar fills to 100% and then asks for a password. I've tried the password my DSL company gave me along with various other things like admin etc. After I enter the password I hit enter and it just asks me for the password over and over again.
View 9 Replies
ADVERTISEMENT
Jan 14, 2008
I have been trying to change my password and all the settings on my WRT54G V8 router today because I forgot the password, and I can't seem to navigate the Basic Setup page. I can log in (most of the time) after resetting the router, but whenever I try to click on a different tab (like "Wireless", or "Security") it comes up with the page saying "This Page Cannot Be Displayed." I'd like to be able to put a password on it (which I have successfully done before on this router) because I live in a college dorm and would like to keep my internet from being bogged down by other people using it.
View 9 Replies
View Related
Dec 21, 2011
I would like to enable VPn in WRT54G.Cann't find where to set up user name & psw.Is client necessary to set up user name & psw if there was no need to set up user name & psw for in WRT54G ?
View 3 Replies
View Related
Jan 1, 2012
new instal will not give me page to enter password
View 1 Replies
View Related
Apr 22, 2012
I use an internet network via wifi that require username and password. The router for wifi network in my place and i connect my cisco(linksys wrt320n) to the router. Every time i want to connect to internet i have to enter my username and password.I try to configure my cisco modem but there is no result. Is there any way or program to automatically enter the username and password?
View 3 Replies
View Related
Jul 24, 2011
getting the E1200 and was reading over the PDF user's guide re. guests. It says "The [b]first time[/b] your guest tries to access the Internet through a web browser, they will see the Guest access screen To continue, they must enter the password you provided in the Password field, then click LoGIn." Should I take this to mean after the first time it won't prompt them again for a password? I was wondering If my roommate wants to use my internet account if she can use the guest account every time without a password or not. If she has to enter it each time it might be easier to just add her computer to the network.
View 2 Replies
View Related
Jan 3, 2013
I have a WRT54G V8 and everyone says the username to sign is is blank and the password is admin. I have tried this and it does not work. I have also reset the router several times and this also does not work.
View 2 Replies
View Related
Mar 17, 2012
I have an E2500 router. When I enter 192.168.1.1 as a web address I am asked for a User name and password. When I do not enter anything for user name and put “admin” in password the screen again asks me for the same two things and eventually goes to a 401 message.
When I enter admin in user name and my secure password to allow devises to connect to the network it lets me in. I thought the password to enter the system settings and the one to enter the network are usually separate. When I open the Cisco Connect program and go into the various menus there my “secure” password is written and visible for anyone who clicks it. Is this how it is supposed to work?Also, how do I occasionally change the password to enter into the network.
View 6 Replies
View Related
Nov 3, 2012
how to enter the 168,192,1,1 to set a passward to my wireless router
View 1 Replies
View Related
Sep 13, 2011
I have a Model #WRT54G-V8 Linksys Router. I never set a password to keep my neighbors from accessing my router. I no longer have an Manual either. set a password or a manual to do that ?
View 1 Replies
View Related
Jan 6, 2012
Setting up a passcode for my router. I have searched online but so far have not been able to find anything.
View 1 Replies
View Related
Apr 9, 2008
I want to know how to change the Router Password. I have two computers running XP connected to my WRT54G; one via cable and the other wirelessly. I'm using WEP security. The router setup defaulted to "admin" for the Router Password; I'd like to make it a stronger password.
View 9 Replies
View Related
Jan 9, 2008
i'm attempting to access the router's configuration options (192.168.1.1) and it's requesting a user and a password, i have not set any of them so i'm using the defaults, been, user (blank), password (admin) but is not taking them; after 3 attempts it gives me a 404 error.
View 6 Replies
View Related
Jul 4, 2007
I have changed the router username/password in the past and either I can't remember it or its not accepting what I am entering, because the router logon will not go through. I have unplugged the router for 5 mins and then let it come back on and still cant get in, pressed the reset button down and let it come back up still nothing, and I have unplugged the cable modem and router for five mins and then plugged them both back up and I still can't get the router to reset to the default admin password. In the past it has worked before but now nothing I try will let me into the router interface to set up anything.
View 4 Replies
View Related
Oct 28, 2007
My router has been in use for some time. WRT54G. I did the set up from the disc and instructions and it's been no problems. I would now like to add a password to log on to it from a wireless computer such as my laptop or the other household computer.
View 9 Replies
View Related
Sep 11, 2007
im trying to reset my linksys WRT54G wireless router because im trying to change some settings. i tried the 192.168.1.1 and it asks for a password, but i dont remember putting one on....i tried the admin in the password field and empty name field but that dosent work.I've tried holding the reset button on the router itself for 10sec+ but that dosen't seem to do anything.
View 9 Replies
View Related
Apr 24, 2011
I have a Lynksys WRT54G wireless router. It works just fine until I try to put a password on it. I go through the basic steps, it talkes all my information and tells me everything is good. I try to sign on the internet and it tells me my password is invalid....and YES Im sure its the right password I entered. I went to http://192.168.1.1/wireless.htm and did all the necessary instructions, and still, it doesn't work. I can change my network name and it works. As long as I leave it unprotected, everything works fine, but when I add the password, it tells me its invalid. I even used 123456 so as to make sure it was the right one.
View 5 Replies
View Related
Oct 1, 2012
I have a WRT54G wireless router that I haven't used in years because my old cable provider supplied me with a router. I recently switched cable providers & they don't provide a wireless routers. I would like to use my WRT54G router, but I don't have the cd. I figured it wasn't a problem because I can just do a manual setup using the ip address 192.168.1.1. I receive the pop up window to enter the user name & password. I follow the instructions & just type in the password field the word admin & l left the user name blank but it doesn't work.
View 4 Replies
View Related
Feb 11, 2013
I have a iphone that will not retain the password for a WRT54g. Each time I leave the house, I have to renter the wifi password on my phone. It remembers other networks, just not the house.
View 1 Replies
View Related
Feb 6, 2008
I have a linksys WRT54G router. I am able to get to the admin menu via IP 192.168.1.1 but can not figure out where to to navigate to or how to put a (password on the wireless access) so my neighbors wont be able to use my router to get on the internet.
View 5 Replies
View Related
Jun 19, 2011
I haven't used my Linksys WRT54G v5 wireless router for about 1 1/2 years and needed it now at a new place.I set a user name and password I've long forgotten for access to the web based security protocols for the modem and I've lost the disk for the control protocol program.I tried pressing the reset button to clear the modem and it took the WPA protocol off the modem so I can use it without any security but that's not a good thing.How do I get it freed up so I can get to the security protocols and put security back on my modem?
View 9 Replies
View Related
Jan 7, 2013
My Iphone 5 will not remember the password for my wrt54g .
View 2 Replies
View Related
Feb 17, 2012
I just dug my router (wrt54g) out of the closet and hooked it up but I cant remember my name or password for the router. Is there anything I can do that doesn't involve paying linksys any sort of "fee"
View 2 Replies
View Related
Apr 13, 2012
I had my router settings in a file on my hard drive so I would not lose them. Just my luck, my hard drive took a giant dump and the restore did not restore 100% and guess which file was among the missing?So I've followed about 15 different "reset" instructions which includes holding the reset button for 10-60 seconds; unplugging the router afterwards for anywhere from immediate to 60 seconds. Obviously, none of those sets of "sage" advice had any influence whatsoever on my router. My "server" is of my own creation:
Core2 Quad Q9550;
8 GB PC28500;
Gigabyte GA-EP45-UD3R;
Windows 7 Ultimate 64 bit SP1.
Cable Modem RCA DCM425.
View 5 Replies
View Related
May 13, 2013
I was given this router (it's my 3rd one) and cannot get the reset button to reset the password. I have run throught a 30/30/30 reset as well as just holding the button in for the standard 30 seconds.
I know the router works, as in i can ping it. It asks for a password when i go to 192.168.1.1, but *blank* and "admin" do not work. When i click the cancel button it displays a pink(salmon) screen that says "401 Unauthorized Authrization required". (all of this is when i am connected to it with an ethernet cable to #1)
When it's sitting there it has an led lit over power and one ove wlan which flickers from time to time.
View 1 Replies
View Related
Jul 15, 2012
Time Warner used remote access to get into my wrt54g system and create a new user id/password for security. As a result, my hp printer will no longer communicate with my computer. HP says to hook up a usb from router to printer, but there's no usb port on the wrt model I own. I hooked up a usb from computer to printer but it did nada...
View 5 Replies
View Related
Feb 12, 2012
I'm trying to set up my WRT54G wireless router so.i can port forward the relevant ports for my programs. I understand that you have to set up a static ip address before you can do a port forward which makes sense as you do not want to keep changing the ip address for the forwarding settings every time your network refreshes. But I cant seem to have it set up. And is there a rule that the static ip that you set should not be within the dhcp range?After setting up the static ip and setting up the port forward settings how do I test if the port is being forwarded correctly?
View 1 Replies
View Related
Jun 7, 2012
my mother in law thought she forgot her wifi password so i tried to do a reseti reset it then no internet at all and could not access the router gateway page (192.168.1.1)I had to set the internet protocol to default and 2 power cycles later i can access the internet.Then i used the linksys disc to set up the security and now it doesn't work can't access nothing through ie.
View 1 Replies
View Related
Jan 19, 2013
I have a WRT54G router that I have not used for many years, but now I need to use it again. I have connected it between my modem and PC, and I am able to get an internet connection on the PC, but I am unable to connect to the router's configuration page. I have tried resetting the router numerous times (holding the reset button 5 seconds, 10 seconds, even longer) to reset the IP address to the default 192.168.1.1 address, but still cannot access the page. The power LED is on and the WLAN and Internet LEDs are on, and the LED for the port my PC is connected to is on. The hardware version of the router is v3. I tried downloading the latest firmware, but without being anble to communicate with the router at the IP address I cannot update the firmware. How can I go about connectiong to the router's setup page? When using ipconfig, the Default Gateway appears to still point to my ISP's IP address instead of the router's.
View 9 Replies
View Related
Dec 4, 2011
I have a Linksys Router that shows WRT54G Ver 3 on its base, but when I go in the settings I realized it says WRT54GL over there.
View 1 Replies
View Related
Feb 27, 2009
I have lost my installation disk for my WRT54G Version 8. Where I can download the drivers and installation.
View 9 Replies
View Related
Jul 18, 2011
I have wrt54gl setup with dd-wrt standard version running hotspotsystem. 3 wrt54g version 5 with dd-wrt micro setup as WDS client of wrt54gl. After the intial setup I can log into the main router wrt54gl (192.168.1.1)and all 3 WDS routers (192.168.1.2 ,3 and 4), but after couple of days of testing suddenly i can not login to 2 of the WDS routers,
I mean I can connect to it and it will get me to internet but I can no longer login, it just says the page take too long to load. I know if I do a hard reset and setup WDS again then it will work, but I dont want to keep doing that. Tried to power cycle the router but still wont work. Is it the load on the router made it inaccessible ?
View 1 Replies
View Related
Sep 8, 2012
I wanted to know if you can setup reserved wireless IP address on the WRT54G router. With all the kids devices, when I reset the router, getting all the devices online is a challage. Some end up with duplicate IP address causing conflicts. If I could reserve an IP address for a specific device. Let me know what option the router has?
View 3 Replies
View Related
