Linksys Wireless Router :: WRT54G - Possible To Setup Reserved IP Address?
Sep 8, 2012
I wanted to know if you can setup reserved wireless IP address on the WRT54G router. With all the kids devices, when I reset the router, getting all the devices online is a challage. Some end up with duplicate IP address causing conflicts. If I could reserve an IP address for a specific device. Let me know what option the router has?
View 3 Replies
ADVERTISEMENT
Sep 28, 2012
I have my other XBOXs connected to a 24 port switch but the one connected to the ea6500 directly gives me this moderate NAT issue. I thought this new router would be an upgrade to my old dlink but so far I get a new problem every day.I have reserved dhcp addresses for all the boxes and set up port triggering for the ports listed in several guides. But what else do I need to do? Is it likely I got a bad router?
View 2 Replies
View Related
Oct 1, 2012
I have a WRT54G wireless router that I haven't used in years because my old cable provider supplied me with a router. I recently switched cable providers & they don't provide a wireless routers. I would like to use my WRT54G router, but I don't have the cd. I figured it wasn't a problem because I can just do a manual setup using the ip address 192.168.1.1. I receive the pop up window to enter the user name & password. I follow the instructions & just type in the password field the word admin & l left the user name blank but it doesn't work.
View 4 Replies
View Related
Aug 6, 2012
A few days ago I lost connection to the internet. The Status on the 54g does not show an IP address from the WAN(cable modem)If I connect the cable modem directly to the computer(wired) I can get online no problems. I can also access the 54g through 192.168.1.1. (wired)But if I connect the Cable modem to the 54g....no Internet This was my bootup.
1. Unplugged both cable and router.
2. Plug in cable wait for solid lights
3. plug in router wait for lights
4. plug in computer...connection established to router.... No Internet
View 1 Replies
View Related
Apr 13, 2012
I had my router settings in a file on my hard drive so I would not lose them. Just my luck, my hard drive took a giant dump and the restore did not restore 100% and guess which file was among the missing?So I've followed about 15 different "reset" instructions which includes holding the reset button for 10-60 seconds; unplugging the router afterwards for anywhere from immediate to 60 seconds. Obviously, none of those sets of "sage" advice had any influence whatsoever on my router. My "server" is of my own creation:
Core2 Quad Q9550;
8 GB PC28500;
Gigabyte GA-EP45-UD3R;
Windows 7 Ultimate 64 bit SP1.
Cable Modem RCA DCM425.
View 5 Replies
View Related
Oct 26, 2007
I have a wrt54g v2.2 connected to a DSL moden supplied and installed by my isp, The router is only used to be a wireless access point and no wired connections apart form the link to the modem.
View 2 Replies
View Related
Feb 12, 2012
I'm trying to set up my WRT54G wireless router so.i can port forward the relevant ports for my programs. I understand that you have to set up a static ip address before you can do a port forward which makes sense as you do not want to keep changing the ip address for the forwarding settings every time your network refreshes. But I cant seem to have it set up. And is there a rule that the static ip that you set should not be within the dhcp range?After setting up the static ip and setting up the port forward settings how do I test if the port is being forwarded correctly?
View 1 Replies
View Related
Jun 7, 2012
my mother in law thought she forgot her wifi password so i tried to do a reseti reset it then no internet at all and could not access the router gateway page (192.168.1.1)I had to set the internet protocol to default and 2 power cycles later i can access the internet.Then i used the linksys disc to set up the security and now it doesn't work can't access nothing through ie.
View 1 Replies
View Related
Jan 19, 2013
I have a WRT54G router that I have not used for many years, but now I need to use it again. I have connected it between my modem and PC, and I am able to get an internet connection on the PC, but I am unable to connect to the router's configuration page. I have tried resetting the router numerous times (holding the reset button 5 seconds, 10 seconds, even longer) to reset the IP address to the default 192.168.1.1 address, but still cannot access the page. The power LED is on and the WLAN and Internet LEDs are on, and the LED for the port my PC is connected to is on. The hardware version of the router is v3. I tried downloading the latest firmware, but without being anble to communicate with the router at the IP address I cannot update the firmware. How can I go about connectiong to the router's setup page? When using ipconfig, the Default Gateway appears to still point to my ISP's IP address instead of the router's.
View 9 Replies
View Related
Dec 4, 2011
I have a Linksys Router that shows WRT54G Ver 3 on its base, but when I go in the settings I realized it says WRT54GL over there.
View 1 Replies
View Related
Feb 27, 2009
I have lost my installation disk for my WRT54G Version 8. Where I can download the drivers and installation.
View 9 Replies
View Related
Jul 18, 2011
I have wrt54gl setup with dd-wrt standard version running hotspotsystem. 3 wrt54g version 5 with dd-wrt micro setup as WDS client of wrt54gl. After the intial setup I can log into the main router wrt54gl (192.168.1.1)and all 3 WDS routers (192.168.1.2 ,3 and 4), but after couple of days of testing suddenly i can not login to 2 of the WDS routers,
I mean I can connect to it and it will get me to internet but I can no longer login, it just says the page take too long to load. I know if I do a hard reset and setup WDS again then it will work, but I dont want to keep doing that. Tried to power cycle the router but still wont work. Is it the load on the router made it inaccessible ?
View 1 Replies
View Related
Apr 27, 2012
When I had DSL, my WRT54G was my DHCP master for my home network. When I got AT&T U-Verse, their "gateway" became the DHCP master and also the wireless access point. But the signal was not strong enough where I wanted to use it, so I hooked up the WRT54G again. I discovered that if I connected the U-Verse gateway to the "Internet" port on the WRT54G Linksys, then my home network was split in two, which I did not want. The WRT54G access point is physically somewhat distant from my wired computer, so I wanted to keep the U-Verse gateway as the DHCP master. (The U-Verse gateway is a router with four "computer" ports but no "Internet" port.)
I followed instructions on the Linksys web site, and using my wi-fi connected computer I re-programmed the WRT54G to be "Disabled" as a DHCP server. Then I powered down and physically connected the U-Verse gateway to a "Computer" port on the WRT54G. This solved my problem: my distant wi-fi computer now has a good signal, and both computers "see" each other.
However, now I seem to have lost access to the WRT54G setup "web page." Is it possible to access the innards of the WRT54G when its DHCP service is disabled? Or would I have to reset the device to factory configuration and start all over if I wanted to make any tweaks?
View 3 Replies
View Related
Apr 12, 2012
My galaxy tab has a difficult time connecting to my wifi. it seems that the only time my galaxy will connect is when i change the DHCP reserved IP address i setup for it. it wouldn't connect before i setup a reserved IP address. now my galaxy tries to connect over and over and won't until i change the reserved IP address by a few digits.the router is an older d-link wbr-2310. i know routers occasionally die, but this is the only problem i have with it.
View 10 Replies
View Related
Jul 4, 2011
Much of the time my wireless printer is offline relative to computers on my LAN because the IP Address has been changed to some value different than what the computer thinks it should be. So I have to figure out what the IP Address is of the printer then modify the printer port on the PC to point to the correct address. If this only happened rarely or if I could easily remember the steps I have to take to remedy the situation, I guess this would not be such a big deal. But it happens a lot and I'm old and alzheimery. So my question is: how do I get the router to assign the same IP Address to the printer all of the time?
View 2 Replies
View Related
Feb 16, 2013
I've got a WRT54G v6 that is password protected via WPA2 Personal TKIP+AES, and SSID broadcast enabled. In the Status menu > Local Netork > DHCP Clients Table there is a MAC Address listed that none of my devices have.
View 6 Replies
View Related
Sep 26, 2011
I tried many times to connect my ps3 to the internet/playstation network so far no luck. The router I'm using is a linksys WRT54G v 2.00.8. I have no problem using my WII, PSP, or computer to go online but my ps3 cannot connect to the internet.url...The errors I might sometimes get is "failed to obtain IP adress" and most of the time I get something with unable to connect to internet server when I am able to get the IP address
I was thinking maybe I shold reset my router to default settings but I'm not sure what's the way to do that or update the router? This problem also has been happening for a week now. In the previous weeks I could easily connect to the internet with no problems and all of a sudden I cannot connect anymore and this has happened a few times already in the past where I am unable to connect to the internet with my ps3 for a few days to a week.
View 1 Replies
View Related
Feb 4, 2013
I am using Linksys WRT54G ver 1.05, XP Pro, DSL Modom & IP Address 192.168.1.104 Fails
View 3 Replies
View Related
Apr 27, 2007
When I go to the router setup screen via 192.168.1.1 the screen does not load properly in MSIE or Firefox. Text does not load.The graphics load okay, and the dropdown boxes, checkboxes, etc. Since many of the links are from text, and all of the descriptions, it is impossible to navigate properly. I managed only by using Firefox's Page Info, Links tab and cutting & pasting. A couple of screen captures are available [URL] have downloaded the latest firmware, but while I can get to the Administration page, much less click on, the Upgrade Firmware sub-tab.
View 3 Replies
View Related
Jul 28, 2011
Currently my Version 2. linksys wireeless router wouldn't reset it's IP and will NOT connect to the IP listed in my ipconfig,
I'm paranoid that it's something I've downloaded... even though that I'm always careful not to get anything off mistrustful websites! As soon as I download Kill Bill for my gf everything just goes straight to.... ! Would a file even be able to dis-able a router wireless capability? None. of my computers are infected but this is still seriously questionable.
I press this **bleep** button daily for 30 seconds and nothing is reset. My default gateway will not connect and the IP from webpages that show users their IP fail
I'm not sure if I should update the firmware because even if I could my ip.... doesn't persist
View 4 Replies
View Related
Jan 14, 2008
I have been trying to change my password and all the settings on my WRT54G V8 router today because I forgot the password, and I can't seem to navigate the Basic Setup page. I can log in (most of the time) after resetting the router, but whenever I try to click on a different tab (like "Wireless", or "Security") it comes up with the page saying "This Page Cannot Be Displayed." I'd like to be able to put a password on it (which I have successfully done before on this router) because I live in a college dorm and would like to keep my internet from being bogged down by other people using it.
View 9 Replies
View Related
Feb 2, 2007
I'm trying to setup a Linksys wireless-g router model number WRT54G with my DSL connection. I followed the basic instructions that came with the router and towards the end of the process it says detecting network settings with a % bar. The bar fills to 100% and then asks for a password. I've tried the password my DSL company gave me along with various other things like admin etc. After I enter the password I hit enter and it just asks me for the password over and over again.
View 9 Replies
View Related
Aug 17, 2011
how do i setup a wrt54g router as a wireless access point to extend wifi signal from e3200 which is broadcasting the internet?
everyone keeps saying to remove the stock firmware and instal the dd-wrt firmare to do this. can i do this with the stock firmware?
View 1 Replies
View Related
Aug 5, 2011
I am finally duffing my WRT 610N (N=Never consistent in performance) main router and WRT54G that I am using up in my shop as an expander. Now I am going to a E4200 Main Router and E3000 for my secondary router (Truthfully a dual band expander).
Am I going to just simply Flash my 610 to default , disconnect it and pack it away , Setup my new E4200 , Plug in my E3000 into port 1 and go about giving it a separate IP Addy? Or can I expect a **bleep**? Any setup tips?
Wirelessly I am running 2 laptops , a PS3 , Xbox 360 , Epson printer , a picture frame and Samsung Blue Ray and TV, and on occasion 2 android phones. On the Wired side (Ethernet) I have a Sling Box , a Desktop , and the router up in the shop. This is the normal load and never everything all at once (Although it has been done).
View 5 Replies
View Related
Jun 17, 2007
I've currently got a WRT54G and have an opportunity to buy a WRT54GS. The problem is that the seller of the WRT54GS has lost the Set-Up Wizard CD & Hard Copy Quick Installation Guide. Obviously I have these items already with my WRT54G. My question is this. Are these items different for the WRT54G or will the stuff I already have for the WRT54G "work" for the WRT54GS.
View 5 Replies
View Related
Oct 26, 2012
each time i type my email and password a red message appears telling me that the account domain is reserved
View 1 Replies
View Related
Dec 25, 2011
I assign private IP for each PC within LAN. And DHCP is in charge of wireless connection since 192.168.0.100 for 10 clients. ,Web setup access is also disable for wireless connection.When a notebook connect to WRT54G via wireless. Private IP is always out of range and it could accesses web setup.What happen to my WRT54G ?
View 3 Replies
View Related
Jan 3, 2013
I have a WRT54G V8 and everyone says the username to sign is is blank and the password is admin. I have tried this and it does not work. I have also reset the router several times and this also does not work.
View 2 Replies
View Related
Sep 12, 2011
The browser-based settings utility for my E1200 can't setup MAC address filtering. I go to the "Wireless MAC Filter" page and enable MAC filtering.When I click the “wireless client list” button, a new window opens saying “IE cannot display the webpage”. This always happens when I have a wireless connection active.When there are no active connections, then IE properly displays the MAC address table, but it is empty since there aren't any computers connected to the router.
View 5 Replies
View Related
Jan 20, 2007
How to setup WRT54G in router mode
View 9 Replies
View Related
Jun 28, 2011
I have a 4 year old Linksys WRT54G V8 I'd like to set up as an access point for an Xbox 360 or DirecTV box. I am using a Linksys E3000 as my wrieless router, atm, and was wondering if there was anyway to use the WRT54G as an access point before I go out and buy other network adapters to get these devices connected.
View 2 Replies
View Related
Apr 10, 2012
I am using a Linksys Wireless-G Broadband Router(Model WRT54G). I am trying to set up a desktop computer to have a wireless usb adapter running so I can connect to the Wireless-G Broadband Router. When I run the setup CD for the wireless usb adapter it asks me to push the Wi-Fi Protected Setup Button on the Linksys Wireless-G Broadband Router.
I have looked at the Linksys router found an obscure button on the front with the Cisco Systems Copyright logo on it. I pushed this but the wireless usb adapter failed to locate the wireless network. There is also another button on the back of the Linksys Router that is a Reset button.
View 1 Replies
View Related
Apr 2, 2011
In my home, I have broadband internet connection, which is Time Warner Cable. I also have an Apple Airport Extreme that shares my internet throughout all of my computers. My current set up runs perfectly but the problem is, I have other devices in my home that require a WEP security key. My Airport Extreme is running on WPA but I don't want to lower it's security to WEP just for those devices. What I'm trying to do is create another separate network which has a WEP security key (Linksys WRT54G). So ultimately, I would like to set up two networks, one is the Airport Extreme and the other Linksys, which both run under the same WAN address provided by Time Warner Cable.
View 11 Replies
View Related