Linksys Wireless Router :: WRT54G - Error While Resetting / Finding IP Address
Jul 28, 2011
Currently my Version 2. linksys wireeless router wouldn't reset it's IP and will NOT connect to the IP listed in my ipconfig,
I'm paranoid that it's something I've downloaded... even though that I'm always careful not to get anything off mistrustful websites! As soon as I download Kill Bill for my gf everything just goes straight to.... ! Would a file even be able to dis-able a router wireless capability? None. of my computers are infected but this is still seriously questionable.
I press this **bleep** button daily for 30 seconds and nothing is reset. My default gateway will not connect and the IP from webpages that show users their IP fail
I'm not sure if I should update the firmware because even if I could my ip.... doesn't persist
View 4 Replies
ADVERTISEMENT
Aug 11, 2008
I have a WRT54G router Ver. 5 with firmware v. 1.02.5. This is the second time this has happened to me but the router reset itself to the factory defaults. I lost all my configurations. I'm saving the configuration this time but it will be annoying to keep having to reconfigure the router.
View 9 Replies
View Related
Jun 23, 2008
I reset my WRT54G wireless router, so I could use the default password for 192.168.1.1 and the default password and username still do not work.
View 6 Replies
View Related
May 13, 2013
I was given this router (it's my 3rd one) and cannot get the reset button to reset the password. I have run throught a 30/30/30 reset as well as just holding the button in for the standard 30 seconds.
I know the router works, as in i can ping it. It asks for a password when i go to 192.168.1.1, but *blank* and "admin" do not work. When i click the cancel button it displays a pink(salmon) screen that says "401 Unauthorized Authrization required". (all of this is when i am connected to it with an ethernet cable to #1)
When it's sitting there it has an led lit over power and one ove wlan which flickers from time to time.
View 1 Replies
View Related
Jan 12, 2010
How do I find security code for my router. It is out of warranty and live chat will not supply it to me. Is there a default code ?
View 9 Replies
View Related
Jun 22, 2007
I set up my daughter's Dell laptop last year to our WRT54G wireless router and I'm trying to connect to our wireless network now with another laptop (a new Dell) and can't find (or remember) my security code or pass phrase. Is there any place on the old laptop that I can access this info? How can I configure the new laptop without this info?
View 9 Replies
View Related
Jul 3, 2011
Well the model of my linksys is in the title so If you need It have a look at the title, so what I wanted to know was, what exactly does resetting my router do (be as detailed as possible) Is It hard to reset a router? and do you think that in my case resetting is necessary.
I forgot my wpa key, also my default password Is not "admin" I'm pretty sure I changed it after I got my router.
View 1 Replies
View Related
Dec 26, 2006
I recently purchased a new router (WRT54G Ver.6) and the initial setup went well. however, when I try to connect my xbox 360 to this network, the DNS does not resolve and it fails every time. what should I do?
View 2 Replies
View Related
Feb 13, 2012
My WRT54G router is already feeding 2 wireless PC's with no problem. Haven't been as successful getting my new Samsung Series 7 TV wireless connection working. The TV screen prompts for a 'security key', but once entered, tells me the connection is unsuccessful. The TV does not provide any specific error message - just tells me to re-enter the security key and/or re-start the router (which I have done many times with no success). I am entering the 'Encryption key' from the WRT54G router when prompted by the Samsung TV for the 'security key'.
View 2 Replies
View Related
Jul 2, 2011
I've tried looking for solutions on the windows seven forums and all over Google but none of them worked.The problem is, sometimes I get an "Unidentified Network, No Internet Access" error on my laptop (wireless). When this happens, the lan speed drops to 1.0 mbps and I get the "No Data Received" error when I try to load pages.My internet is on fine and my brother can access the internet fine on a desktop which is wired to the router and modem. My mom's notebook sometimes gets this error as well.
Is there any real solution for this problem or known compatibility problems between my WRT54G (version 1.1 I think) and Windows 7? Really need a solution to this, before I had to re-setup my whole connection, I didn't get such a problem. My laptop doesn't get the error in the school network either.
View 2 Replies
View Related
Aug 6, 2012
A few days ago I lost connection to the internet. The Status on the 54g does not show an IP address from the WAN(cable modem)If I connect the cable modem directly to the computer(wired) I can get online no problems. I can also access the 54g through 192.168.1.1. (wired)But if I connect the Cable modem to the 54g....no Internet This was my bootup.
1. Unplugged both cable and router.
2. Plug in cable wait for solid lights
3. plug in router wait for lights
4. plug in computer...connection established to router.... No Internet
View 1 Replies
View Related
Oct 26, 2007
I have a wrt54g v2.2 connected to a DSL moden supplied and installed by my isp, The router is only used to be a wireless access point and no wired connections apart form the link to the modem.
View 2 Replies
View Related
Jul 4, 2011
Much of the time my wireless printer is offline relative to computers on my LAN because the IP Address has been changed to some value different than what the computer thinks it should be. So I have to figure out what the IP Address is of the printer then modify the printer port on the PC to point to the correct address. If this only happened rarely or if I could easily remember the steps I have to take to remedy the situation, I guess this would not be such a big deal. But it happens a lot and I'm old and alzheimery. So my question is: how do I get the router to assign the same IP Address to the printer all of the time?
View 2 Replies
View Related
Feb 16, 2013
I've got a WRT54G v6 that is password protected via WPA2 Personal TKIP+AES, and SSID broadcast enabled. In the Status menu > Local Netork > DHCP Clients Table there is a MAC Address listed that none of my devices have.
View 6 Replies
View Related
Sep 8, 2012
I wanted to know if you can setup reserved wireless IP address on the WRT54G router. With all the kids devices, when I reset the router, getting all the devices online is a challage. Some end up with duplicate IP address causing conflicts. If I could reserve an IP address for a specific device. Let me know what option the router has?
View 3 Replies
View Related
Sep 26, 2011
I tried many times to connect my ps3 to the internet/playstation network so far no luck. The router I'm using is a linksys WRT54G v 2.00.8. I have no problem using my WII, PSP, or computer to go online but my ps3 cannot connect to the internet.url...The errors I might sometimes get is "failed to obtain IP adress" and most of the time I get something with unable to connect to internet server when I am able to get the IP address
I was thinking maybe I shold reset my router to default settings but I'm not sure what's the way to do that or update the router? This problem also has been happening for a week now. In the previous weeks I could easily connect to the internet with no problems and all of a sudden I cannot connect anymore and this has happened a few times already in the past where I am unable to connect to the internet with my ps3 for a few days to a week.
View 1 Replies
View Related
Feb 4, 2013
I am using Linksys WRT54G ver 1.05, XP Pro, DSL Modom & IP Address 192.168.1.104 Fails
View 3 Replies
View Related
Nov 18, 2011
So, i have a e2500 router and find that every so often, I have to unplug it and reset it because I am losing my internet connection.
View 7 Replies
View Related
Jan 18, 2010
My roommate and I recently got a WRT120N to replace an older Linksys router that was exhibiting the same problems with less frequency. Indeed, the entire reason we got the new router was to fix these problems. Alas, they have become worse.Anyways, what's happening is that the router constantly resets itself. It does this every 20 minutes to an hour and doesn't seem to be related to how much traffic it's dealing with.It's not just the internet going down, it's the entire network, and not even just the wireless part. My computer has a wired connection to the router and, and I get told "A network cable has been unplugged" every time it happens. Then, if I look down at the router, I see no flashing lights, just the steady glow of the power light. It always fixes itself after 10-15 seconds, but it's very annoying. Certainly, playing games online or having a conversation on Skype is made more difficult.As previously mentioned, we replaced our older router because it was exhibiting the same behavior, but the new one does it with greater frequency. At the very least, the router does reset itself instead of needing us to cycle the power. The setup was slightly different with the old router: I was using a wireless connection with a WMP54Gv4 which I've had to disable since it bluescreens the moment it so much as sniffs a signal from the WRT120N?
View 9 Replies
View Related
Apr 21, 2013
This router is resetting to default(erase router name and passwords and resetting router login to default. only thing i see is my sons has a iphone that will use the wifi and i have set parental restriction on it during certian hours. This past 3 time it has reset in 2 weeks his phone with the parental restricions are common. one other thing is i use the app on my droid to check settings on the router .
so th ecommon points here are one one using wifi threw router and has restrictions on it and outer is me with the linksys app to log into my rrouter and make a change like yuring on parental controls on..
but what happens is the router will reboot and renames itself to cisc05179 and cleared all protection and sets router to unsecured.
View 3 Replies
View Related
Dec 24, 2011
Turns out one of the relatives changed the router name and password, and in a fit of brilliance, forgot to WRITE THE NEW USERNAME/PASSWORD DOWN!So I typed in 192.168.1.1 and tried literally every combination I know. NOTHING works tried rebooting the WRT120N. I tried both holding the reset button in, as well as holding the reset button in along with pulling the power adapter cord. Neither of these achieved the desired result (which would be the resetting of the factory username and password to "admin/admin".
View 2 Replies
View Related
Aug 19, 2012
Where do I find the security key for the router as there are a series of numbers on the router and the box. Which one is the security key as it's not identified as such?
View 1 Replies
View Related
Jul 22, 2011
specs: linksys router wrt160n v3, verizon modem gt701c, windows xp service pack 3, verizon DSL, southern california.I have been able to connect to the internet directly through the modem only...but i need my wireless back working. I've reset my router a few times recently trying things i've read on forums from people with similar problems. The most recent thing i did was RESET the router -> connected modem/router/computer properly -> turned them all back on in the proper order -> check to see if websites would open. They didn't so i tried doing this, which was suggested...i plugged the router into the computer and enabled MAC address and then pressed the Clone MAC address button and saved....then I tturned everything off again and rebooted everything again in the proper order and still couldn't load any web pages. Here are my IPCONFIG/ALL read outs for both when i'm hooked up with the router & modem (which isnt working) and directly to the modem (which is working) this is the one with the router & modem:
C:Documents and SettingsOwner>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : shakas
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
[code]....
My modem and wireless were working fine for years...and then recently without me doing anything my modem kept dropping connection and the internet and dsl lights kept flashing and then going back solid....so i'd be connected for a few minutes and then they'd start flashing again over and over all the time. I finally called verizon and then had me fiddle around with stuff...followed all their directions...but ended up only being able to connect while directly connected to the modem. Even then, the modem was still losing connection and getting it back. (i was supposed to schedule a house call for a tech to check it out, never did) Over a couple weeks the connection ended up getting better on its own, so now it pretty much never drops out anymore. (almost) i've reset my modem, i've reset my router....i just still cant seem to get websites working with my modem and wireless router connected.
View 3 Replies
View Related
Nov 29, 2012
Putting this router back in service, I reset (10 and 30 sec hold) until lights flashed. Unplugged it. Came back and connected to computer. Used default u/n = blank and p/w = admin -- doesn't work, can't get to control screen. Tried various combinations and still won't work. How do I get router to respond?
View 9 Replies
View Related
Jan 9, 2013
How do I either retrieve or reset the router password? To edit it you have to have the current password, which it doesn't display. If I want to reset it do I have to do a factory reset on the router? If I do that, then I have to set everything up again.
View 3 Replies
View Related
Sep 15, 2011
I believe I have the router connected to the computer but its asking for a security key and I dont know where to find it?
View 1 Replies
View Related
May 16, 2012
i looked everwhere for the firmware. cant find it anywhere. looking for 1.0 or 1.1 firmware for wrt300n.
View 4 Replies
View Related
Nov 5, 2011
A retailer (Best Buy's Geek Squad) made adjustments to my Linksys E3000 router when I bought a Sony Media Player from them a number of months ago. It was the first wireless device integrated into my wired LAN network (three computers).
In attempting to set up a GUEST connection, I pulled up Cisco Connect which I originally used to set up my network. The BB Geek didn't use a key and followed a different procedure unknown to me.
As I face the Cisco Connect screen now, it tells me "Can't access your router settings. The router password has been changed." Then in the "Router password" block, it gives the original password I assigned.
I had written another name I thought was associated with the changes made by the BB Geek so I copied the password there now, inserted the new PW, and clicked Next. I was then asked if I wanted to proceed with the change ... but the change it was proposing was the exact PW I just copied. Confused, I cancelled the operation.
View 8 Replies
View Related
Jul 7, 2011
I recently upgraded the OS on my laptop to Windows 7, which wiped out most of my older Vista settings. When I try to connect to my home network, I am prompted for a security key (network key?). How do I find the security key? I can't find any of the paperwork that came with my router.
By the way, I am currently using my desktop, running under Windows XP.
View 2 Replies
View Related
Dec 28, 2007
My wife has a laptop that we want hooked up to the internet through our linksys wireless router. But I cannot remember my security key or passphrase needed to get her on the connection. How do I recover, or find, it?
View 9 Replies
View Related
Jan 9, 2010
WRT160Nv3 Firmware Version: v3.0.02
I've been using Linksys for years but the last two routers I have purchased have been very problematic.
- My router hasn't had this problem before. The other day I was downloading 4 games at a time from STEAM, when I got home from work I found that my router had completely gone back to factory settings. So I configured my DSL PPPoE, SSID, Wireless Security (WPA) changed the default admin PW and about 20 minutes later it was back to factory again.
I've done a "hard" reset and reconfigured and still it resets itself. What's also upsetting is this completely opens my network up to ANYONE when this happens...
So far in the past 2 days I have (now using a backup restore file) re-configured the device 10 times.
The only thing I can think of is that I just got Windows 7 the same day this started happening. I thought it could be STEAM as well so right now I have STEAM closed to see if it resets while it isn't running.
Could TOO much demand on the router cause it to completely reset itself to factory config?? Seems to me like there's a huge firmware or hardware problem here.
I have other friends and even co-workers that also have problems galore with their Linksys products...No other router it seems has as MANY issues as Linksys. Hat to say it but my next purchase most likely will not be another one of their products. This just shouldn't be happening.
View 5 Replies
View Related
Jan 5, 2013
I can't remember my password and I am locked out. How can I reset?
View 1 Replies
View Related
Jan 13, 2013
I recently bought an EA4500 specifically to utilize the QoS feature. I have my xbox in the set up for the prioritization, but when I try to set the bandwidth to 250 kbps upload, it resets to 0. My xbox is hardwired to the router and I know most of the feature set of this particular router is geared towards wifi, but I would assume the QoS settings would apply to the wired devices as well. exchanging this router for one that supports DD-WRT?
View 8 Replies
View Related