Linksys Wireless Router :: Resetting Password On WRT120N?
Dec 24, 2011
Turns out one of the relatives changed the router name and password, and in a fit of brilliance, forgot to WRITE THE NEW USERNAME/PASSWORD DOWN!So I typed in 192.168.1.1 and tried literally every combination I know. NOTHING works tried rebooting the WRT120N. I tried both holding the reset button in, as well as holding the reset button in along with pulling the power adapter cord. Neither of these achieved the desired result (which would be the resetting of the factory username and password to "admin/admin".
View 2 Replies
ADVERTISEMENT
Jan 18, 2010
My roommate and I recently got a WRT120N to replace an older Linksys router that was exhibiting the same problems with less frequency. Indeed, the entire reason we got the new router was to fix these problems. Alas, they have become worse.Anyways, what's happening is that the router constantly resets itself. It does this every 20 minutes to an hour and doesn't seem to be related to how much traffic it's dealing with.It's not just the internet going down, it's the entire network, and not even just the wireless part. My computer has a wired connection to the router and, and I get told "A network cable has been unplugged" every time it happens. Then, if I look down at the router, I see no flashing lights, just the steady glow of the power light. It always fixes itself after 10-15 seconds, but it's very annoying. Certainly, playing games online or having a conversation on Skype is made more difficult.As previously mentioned, we replaced our older router because it was exhibiting the same behavior, but the new one does it with greater frequency. At the very least, the router does reset itself instead of needing us to cycle the power. The setup was slightly different with the old router: I was using a wireless connection with a WMP54Gv4 which I've had to disable since it bluescreens the moment it so much as sniffs a signal from the WRT120N?
View 9 Replies
View Related
Nov 29, 2012
Putting this router back in service, I reset (10 and 30 sec hold) until lights flashed. Unplugged it. Came back and connected to computer. Used default u/n = blank and p/w = admin -- doesn't work, can't get to control screen. Tried various combinations and still won't work. How do I get router to respond?
View 9 Replies
View Related
Jan 9, 2013
How do I either retrieve or reset the router password? To edit it you have to have the current password, which it doesn't display. If I want to reset it do I have to do a factory reset on the router? If I do that, then I have to set everything up again.
View 3 Replies
View Related
May 13, 2013
I was given this router (it's my 3rd one) and cannot get the reset button to reset the password. I have run throught a 30/30/30 reset as well as just holding the button in for the standard 30 seconds.
I know the router works, as in i can ping it. It asks for a password when i go to 192.168.1.1, but *blank* and "admin" do not work. When i click the cancel button it displays a pink(salmon) screen that says "401 Unauthorized Authrization required". (all of this is when i am connected to it with an ethernet cable to #1)
When it's sitting there it has an led lit over power and one ove wlan which flickers from time to time.
View 1 Replies
View Related
Jan 5, 2013
I can't remember my password and I am locked out. How can I reset?
View 1 Replies
View Related
Oct 16, 2012
I am trying to figure out my WEP code to use to connect to XBOX LIVE. To log on to my internet we just have a WPA-Personal I think, so I have been trying to sign into my router to hopefully obtain my WEP key there, but cannot sign in. I have tried every combination of usernames and passwords such as:
[none] admin
admin admin
[none] [none]
n/a ... and more but nothing works.
View 1 Replies
View Related
Mar 3, 2012
I bought a Wireless-N Home Router MODEL WRT120N so that I could use my new Kindle Fire online, since I could never catch an open wi-fi signal in my house. Router IS correctly installed and working fine.....but when I go to use my Kindle, I see it on the list, click on it, enter my password.......and it tells my my password must be incorrect. I KNOW it is correct! I even went and CHANGED the password just in case!
My Kindle keeps giving the message "Unable to connect to the selected Access Point. Please check the password you have provided."
View 8 Replies
View Related
May 28, 2012
I cant remember my password and i lost my cd installer. someone hacked my internet line< I want to change my password but cannot get through the router mainframe.How can I access my router?
View 3 Replies
View Related
Apr 3, 2012
Last year our Network Security Supervisor submit his resignation and unfortunately did not endorse us the admin password we already tried the password he suggested when we contacted him but nothing of them works. Is there anyway we can reset the password without resetting to factory default?
View 1 Replies
View Related
Jul 30, 2012
I have tried to reset the password for 7604 but it is not working. At the rommon mode, i input 0x2142, and then reset.
It reloads and keeps asking for password.
View 7 Replies
View Related
Nov 18, 2011
So, i have a e2500 router and find that every so often, I have to unplug it and reset it because I am losing my internet connection.
View 7 Replies
View Related
Apr 21, 2013
This router is resetting to default(erase router name and passwords and resetting router login to default. only thing i see is my sons has a iphone that will use the wifi and i have set parental restriction on it during certian hours. This past 3 time it has reset in 2 weeks his phone with the parental restricions are common. one other thing is i use the app on my droid to check settings on the router .
so th ecommon points here are one one using wifi threw router and has restrictions on it and outer is me with the linksys app to log into my rrouter and make a change like yuring on parental controls on..
but what happens is the router will reboot and renames itself to cisc05179 and cleared all protection and sets router to unsecured.
View 3 Replies
View Related
Jul 22, 2011
specs: linksys router wrt160n v3, verizon modem gt701c, windows xp service pack 3, verizon DSL, southern california.I have been able to connect to the internet directly through the modem only...but i need my wireless back working. I've reset my router a few times recently trying things i've read on forums from people with similar problems. The most recent thing i did was RESET the router -> connected modem/router/computer properly -> turned them all back on in the proper order -> check to see if websites would open. They didn't so i tried doing this, which was suggested...i plugged the router into the computer and enabled MAC address and then pressed the Clone MAC address button and saved....then I tturned everything off again and rebooted everything again in the proper order and still couldn't load any web pages. Here are my IPCONFIG/ALL read outs for both when i'm hooked up with the router & modem (which isnt working) and directly to the modem (which is working) this is the one with the router & modem:
C:Documents and SettingsOwner>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : shakas
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
[code]....
My modem and wireless were working fine for years...and then recently without me doing anything my modem kept dropping connection and the internet and dsl lights kept flashing and then going back solid....so i'd be connected for a few minutes and then they'd start flashing again over and over all the time. I finally called verizon and then had me fiddle around with stuff...followed all their directions...but ended up only being able to connect while directly connected to the modem. Even then, the modem was still losing connection and getting it back. (i was supposed to schedule a house call for a tech to check it out, never did) Over a couple weeks the connection ended up getting better on its own, so now it pretty much never drops out anymore. (almost) i've reset my modem, i've reset my router....i just still cant seem to get websites working with my modem and wireless router connected.
View 3 Replies
View Related
Aug 11, 2008
I have a WRT54G router Ver. 5 with firmware v. 1.02.5. This is the second time this has happened to me but the router reset itself to the factory defaults. I lost all my configurations. I'm saving the configuration this time but it will be annoying to keep having to reconfigure the router.
View 9 Replies
View Related
Jun 23, 2008
I reset my WRT54G wireless router, so I could use the default password for 192.168.1.1 and the default password and username still do not work.
View 6 Replies
View Related
Jan 9, 2010
WRT160Nv3 Firmware Version: v3.0.02
I've been using Linksys for years but the last two routers I have purchased have been very problematic.
- My router hasn't had this problem before. The other day I was downloading 4 games at a time from STEAM, when I got home from work I found that my router had completely gone back to factory settings. So I configured my DSL PPPoE, SSID, Wireless Security (WPA) changed the default admin PW and about 20 minutes later it was back to factory again.
I've done a "hard" reset and reconfigured and still it resets itself. What's also upsetting is this completely opens my network up to ANYONE when this happens...
So far in the past 2 days I have (now using a backup restore file) re-configured the device 10 times.
The only thing I can think of is that I just got Windows 7 the same day this started happening. I thought it could be STEAM as well so right now I have STEAM closed to see if it resets while it isn't running.
Could TOO much demand on the router cause it to completely reset itself to factory config?? Seems to me like there's a huge firmware or hardware problem here.
I have other friends and even co-workers that also have problems galore with their Linksys products...No other router it seems has as MANY issues as Linksys. Hat to say it but my next purchase most likely will not be another one of their products. This just shouldn't be happening.
View 5 Replies
View Related
Jan 13, 2013
I recently bought an EA4500 specifically to utilize the QoS feature. I have my xbox in the set up for the prioritization, but when I try to set the bandwidth to 250 kbps upload, it resets to 0. My xbox is hardwired to the router and I know most of the feature set of this particular router is geared towards wifi, but I would assume the QoS settings would apply to the wired devices as well. exchanging this router for one that supports DD-WRT?
View 8 Replies
View Related
Jul 28, 2011
Currently my Version 2. linksys wireeless router wouldn't reset it's IP and will NOT connect to the IP listed in my ipconfig,
I'm paranoid that it's something I've downloaded... even though that I'm always careful not to get anything off mistrustful websites! As soon as I download Kill Bill for my gf everything just goes straight to.... ! Would a file even be able to dis-able a router wireless capability? None. of my computers are infected but this is still seriously questionable.
I press this **bleep** button daily for 30 seconds and nothing is reset. My default gateway will not connect and the IP from webpages that show users their IP fail
I'm not sure if I should update the firmware because even if I could my ip.... doesn't persist
View 4 Replies
View Related
Dec 14, 2012
im trying to do is reset my wifi password so that i can get internet for my moms new lap top.
i have a sb5102 cable modem and i need to change the password , how do i do that??
View 1 Replies
View Related
Jan 17, 2012
I'm having a very difficult time getting my WRT54GS to work with my Westell 6100 modem. I've been bouncing around gathering info, and what I've learned is that the goofy way CenturyLink tech support told me to hook up my old wired router (modem line into outgoing (LAN) router port) is because the Westell 6100 is a "smart modem/router". Therefore, when I run the Linksys setup CD, it sees the modem as a router, and won't properly configure. I've also learned that the Westell modem can be "dumbed down" into simply a modem by putting it into "bridge mode", which is where I'm at right now - trying to get it reset to factory defaults and resetting the connection type from PPPoE to Bridge. In the meantime, I also reset the WRT54GS to factory defaults, and now I've got another problem: the router will not allow me to set up encryption. The default setting is "Disabled", and when I click the down arrow and try to make any selection at all (preferred selection is WPA2 Personal), it reverts to Disabled. I've also tried to change the router's IP address to 192.168.2.1 (and alternately to 192.168.1.253), so it won't conflict with the modem's IP, and it freezes up every time I try.
View 2 Replies
View Related
Jul 9, 2012
resetting the disable password on an ASA5505 device
View 9 Replies
View Related
Mar 24, 2013
I am new with ASA devices I have a ASA 5505, the former IT manager does not remember the password of it. I am just wondering do I lose the configuration on it if I reset the password?if yes, how can I download the configuration before resetting the password. and how can I upload the downloaded configuration
View 2 Replies
View Related
Apr 18, 2012
Linksys WRT120N to 811.11n? I set to 811.11N Only with 40Mhz, saved and reboot the device but the signal continuous in 811.11g.
View 3 Replies
View Related
May 18, 2011
I bought a new Linksys WRT120N modem which is working great, but the wireless for some reason isn't working properly. My computer is able to sense the exsistence of the connection tho. I've tried using other computers to connect to it, and still the same problem, can sense but cannot connect.
View 8 Replies
View Related
Mar 25, 2011
I currently have a network using ipaddress 10.1.x.x and 10.2.x.x and 10.3.x.x with a subnet of 255.0.0.0 I purchased 2 of the wrt120n wireless routers for testing and find I can not use the subnet of 255.0.0.0.
View 9 Replies
View Related
Oct 29, 2009
I have a WRT120N and have been trying to set up priorities using the QoS under the tab Applications and Gaming. Everytime I "Save Settings" it does not save. It refreshes the page and deletes everything I just set up.
I did Live Chat and they told me it was my router. I returned it and got another one... Same problem
View 9 Replies
View Related
Sep 5, 2010
I'm using an Static IP adress and i'm using wrt120n router, but to connect the internet i have plugged the internet cable in the 1,2,3,4 (doesn't matter which one) slot. So now i'm just using the wirelss part of the router without "routering" if i can say so. When i put the internet cable in the Internet slot of the router, the laptop just cant connect to internet - it shows Unidentified network without Internet Access. I don't know what type of changes i have to make in the WEB interface of the router. I think i have to set the type of the connection - now is DHCP and may be to put my IP adress, DNS, Subnet mask in the router settings, but don't know how exactly. I've tried to set up the router with the CD-interface but same thing happened - Unidentified network when the cable is plugged in the Internet (yellow) port. How to set up the router to be a router, not just a wireless switch?
View 9 Replies
View Related
Aug 20, 2011
Is there anyway to disable WPS on the WRT120N router?
All I can do is switch the "view" from WPS to manual configuration in the management console...this doesn't actually disable anything.Maybe I don't understand WPS security, but what's the point of using a 20 character WPA2 password if WPS has an 8 digit PIN that I can't change or disable?
View 3 Replies
View Related
Mar 17, 2010
I just bought a WRT120N to set up with my new Gateway Windows 7 64-bit using Cablevision cable internet. When I go through the steps from the CD to install, the wizard does not find the connection. When the internet is plugged directly into the computer, it works fine. If I have the router plugged in first and then run the install CD, it picks up the router as an existing router but I can't get it to install
View 4 Replies
View Related
Jul 2, 2012
I have a WRT120N router installed in my office.All PC and Laptops are connected to it via WiFi.there are about 3 PC and 4 Laptops.The WiFi keeps going Off now and then..and comes back on in a minitue or so.
View 9 Replies
View Related
Apr 2, 2013
why are some of the lines solid & others dotted on the map page?
View 4 Replies
View Related
Dec 25, 2011
I removed my ps3 from my network map and now i can't connect it back. How to do it?
View 1 Replies
View Related
