I've got a WRT54G v6 that is password protected via WPA2 Personal TKIP+AES, and SSID broadcast enabled. In the Status menu > Local Netork > DHCP Clients Table there is a MAC Address listed that none of my devices have.
View 6 Replies
We are running our internal network on the 192.168.1.x range.
We have just installed a new control system which is running on a closed 192.168.0.x network (no internet access).
What we need to do is use the WRT54G to connect the 2 networks together so that we can VNC into one of the computers on the control system network so that it can be managed.
I have tried connecting the two networks by plugging the 192.168.0.x network into the WAN/Internet Port on the WRT54G, and setting the "Internet Connection Type" to "Static IP" and setting the "Internet IP Address :" as 192.168.1.200 (the main PC I need to VNC into) but cannot ping any of the other computers..
I have a WRT54G wireless router ... I want to connect a new laptop through it ... but I need either a network key or a password ... cant locate these ..
View 8 Replies View RelatedIt constantly disconnecting and wouldn't stay connected for a long period of time, so I tried messing with the settings and it no longer connects to the internet. It tells me that the settings for this router is not compatible for the computer settings. I have reset the router to its factory settings, restarted the computer, restarted the router but nothing changed. I have tried plugging my computer to the router via ethernet cord and typing in 192.168.1.1 in the address field of Internet explorer and nothing comes up. I also forgot the password to the router!
View 1 Replies View RelatedA few days ago I lost connection to the internet. The Status on the 54g does not show an IP address from the WAN(cable modem)If I connect the cable modem directly to the computer(wired) I can get online no problems. I can also access the 54g through 192.168.1.1. (wired)But if I connect the Cable modem to the 54g....no Internet This was my bootup.
1. Unplugged both cable and router.
2. Plug in cable wait for solid lights
3. plug in router wait for lights
4. plug in computer...connection established to router.... No Internet
I wired it all up correctly, and Continue to get "error 322: check router" upon every attempted install. I did some research and tried releasing and renewing IP amongst restarting all networking devices AND PC's. Peculiar enough, I could connect AND get online wirelessly from a netbook, but neither of my 2 PC's could connect via a wire. I got a defective router, is it possible the ports are malfunctioning? because the lights are on, but 3 or all of the 4 lights are continually on when only 2 ports are plugged in
View 5 Replies View RelatedIt is a wired, not wireless connection. The light isn't even coming on for the port it's plugged into. I tried a different cord, a different port, upgrading the firmware, and restarting each device. Nothing has worked so far.
View 9 Replies View RelatedMy WRT54G router locks up 100% of the time when attempting to connect connect wirelessly to a Samsung Blue Player (Model number BD-P3600). I can connect to it with a cable no problem, but when I attempt to do so wirelessly and type in the password on the Blue Ray player, it attempts to connect but the router locks up and all devices connected to it (wired or wirless) lose connectivity
View 1 Replies View RelatedI can't get my Epson Workforce 615 (610 series) All in One Printer to connect to my WRT54G router. I was on the phone with Epson for over an hour and renetered my SSID and security code 4 times. They said it was something about the router not letting it connect. The printer sees the SSID and I put my laptop in the same location as the printer and it has very good signal strength. I even took the printer back and got another one. The router does not have MAC filtering enabled.
View 5 Replies View RelatedI am trying to connect a Zodiac iAqualink wireless pool equipment controller to my home network (WRT54G) without success. This is a 802.11b device. My router is set to mixed mode. What I have tried:
1. Set it up as suggested in the instructions: WEP2 security, double checked SSID and password
2. Set it up without wireless security
3. Changed channels
4. Set mode to 802.11b
In all cases the LED on the iAqualink that is supposed to indicate that it is connected to the network illuminates properly, but I can never find the device using EasyLink Advisor.
Running Win XP (no service pack), WPA personal. Two other computers connect fine. On an old laptop running Win XP the network card sees the router, but when I enter the correct passcode (16 character) I get a message saying the code must be 13 characters. How can a connect this computer without disabling the other two wireless devices running through the router?
View 2 Replies View RelatedI have a wrt54g v2.2 connected to a DSL moden supplied and installed by my isp, The router is only used to be a wireless access point and no wired connections apart form the link to the modem.
View 2 Replies View RelatedMuch of the time my wireless printer is offline relative to computers on my LAN because the IP Address has been changed to some value different than what the computer thinks it should be. So I have to figure out what the IP Address is of the printer then modify the printer port on the PC to point to the correct address. If this only happened rarely or if I could easily remember the steps I have to take to remedy the situation, I guess this would not be such a big deal. But it happens a lot and I'm old and alzheimery. So my question is: how do I get the router to assign the same IP Address to the printer all of the time?
View 2 Replies View RelatedI wanted to know if you can setup reserved wireless IP address on the WRT54G router. With all the kids devices, when I reset the router, getting all the devices online is a challage. Some end up with duplicate IP address causing conflicts. If I could reserve an IP address for a specific device. Let me know what option the router has?
View 3 Replies View RelatedI tried many times to connect my ps3 to the internet/playstation network so far no luck. The router I'm using is a linksys WRT54G v 2.00.8. I have no problem using my WII, PSP, or computer to go online but my ps3 cannot connect to the internet.url...The errors I might sometimes get is "failed to obtain IP adress" and most of the time I get something with unable to connect to internet server when I am able to get the IP address
I was thinking maybe I shold reset my router to default settings but I'm not sure what's the way to do that or update the router? This problem also has been happening for a week now. In the previous weeks I could easily connect to the internet with no problems and all of a sudden I cannot connect anymore and this has happened a few times already in the past where I am unable to connect to the internet with my ps3 for a few days to a week.
I am using Linksys WRT54G ver 1.05, XP Pro, DSL Modom & IP Address 192.168.1.104 Fails
View 3 Replies View RelatedCurrently my Version 2. linksys wireeless router wouldn't reset it's IP and will NOT connect to the IP listed in my ipconfig,
I'm paranoid that it's something I've downloaded... even though that I'm always careful not to get anything off mistrustful websites! As soon as I download Kill Bill for my gf everything just goes straight to.... ! Would a file even be able to dis-able a router wireless capability? None. of my computers are infected but this is still seriously questionable.
I press this **bleep** button daily for 30 seconds and nothing is reset. My default gateway will not connect and the IP from webpages that show users their IP fail
I'm not sure if I should update the firmware because even if I could my ip.... doesn't persist
I've been having a ton of problems with fixing my connection with my wireless network. A few months ago, I lost connection on my desktop computer and I reconnected... however, it didn't actually connect. When I hovered my cursor over the Wireless Network Connection icon, it just said "Acquiring Network Address" and never connected. I got onto my laptop and did a quick search on the problem. A few wrong moves later, and I couldn't even find my wireless network.
Despite all of my attempts at creating a connection, I still have no internet. I've even tried plugging my computer into my WRT54G router via cable, and still no connection. It's not the router that's the problem, though, as my two other computers and xbox have perfect internet connection.
I use Windows XP, I use a WRT54G router, I have Mediacom high speed internet, and that's about all I know.
I have a linksys router WRT54G connected to a modem supplied to me by Time Warner Cable. Just last night, for some reason my internet stopped working. After calling Time Warner Cable internet support, I found out that the modem is working. If I connect my laptop (Dell model which is running on Windows 7) directly via cable to the modem, I can connect to the internet. BUT if i connect my modem to the router, and then connect my laptop via cable or wireless to the router, I can't connect to the internet. When I open up my network window on the computer, I see that my laptop is connected to the router and the router is connected to the internet but I can't connect to the internet. I tried calling linksys customer service and my insurance ran out so yea ... On the laptop, i ran a troubleshooting program and it gave me an error stating that it failed to connect to the DNS server and I should contact the internet provider. Time Warner Cable told me that if connected to the modem directly, I could access the internet indicating that there's an error in the router.
View 1 Replies View Relatedhave an unknown mac address listed in my router's connected devices pane. There is no ip address or device name listed. I know the mac addresses of the machines I have put on the internet, and i don't recognize that one. Router: Netgear N300 WNR2000v
View 2 Replies View RelatedI keep getting some additional IP addresses logging onto my home network that have an address outside what should be allowed by the router. The server is running at 192.168.2.1 and is set to only allow clients from 192.168.2.2 - 192.168.2.10 so a total of 9 clients should be allowed on.The problem is that something keeps logging in with an address of 192.168.169.2 or 3 etc. Sometimes more than one device at a time.I have assumed that it is some automated or virtual client as I'm pretty certain my network has not been breached. I have a 9 character password with a relatively random alphanumeric combination, although I haven't tried changing the password (I live in a share house with with a bunch of devices using wireless, so I haven't yet bothered). What I don't understand is how it has connected with the xx.xx.169.xx range at all. I have a Belkin 'Share' Wireless N Modem Router and at some stage there was a 'guest' network but that has since been disabled and I still am seeing the extra address. I have attached a screen shot of the DHCP client list on the router.The following is a list of devices that may be on the network at times, I'm thinking one of these may be responsible for the problem:
Windows Vista Desktop - Only LAN device
PS3
Macbook
Epson wireless printer
Android HTC Desire Mobile Phone
Laptops running various Windows versions (XP, Vista and 7)
A few thoughts I had:
- the android phone is capable of running a wireless hotspot, may have to look into it to see if if has been operating as an access point into the Belkin router, but assumed this wouldn't bring up clients connected to the phone on the home router.
- The desktop has PS3 Media server installed to stream video to the PS3 over the network (not that I have ever managed to get it to work), however this is not ever open on the desktop.
I have a linksys system WRT54G at home. I had no problems with the Linksys router until about a month ago when I decided to make it a secure network. I run three computers of the wireless router (1 desktp and 2 laptops) Since making the wireless network secure I can not connect with my business laptop IBM Thinkpad X40, but thother e computers work just fine.
View 8 Replies View RelatedI have a WRT300n router and want to connect to my Uverse Gateway. When I connect them & try to use the internet connection I get an error that says a connected router must be capable of using DYnamic IP addresses.
View 1 Replies View RelatedI had connected my WRT54G to my wireless router by disableing the DHCP on WRT54G. It worked great until recently. Now I upgraded my linksys box to the latest and greatest AC1750. Iwant to use complete features of AC1750 router. So to do this, How do I connect Verizon Model(its modem+wireless router) to this Router and have AC1750 drive everything.
View 1 Replies View Relatedim moving into an apartment that provides internet via a wireless hotspot (is PW protected and has WPA2 protection). I would like to be able to connect a router to it and then wire my printer, Media server and Roku device to my router.im guessing I will have to somehow bridge my router to the wireless hotspot. I would like the ability to then broadcast my own wireless network from my router, and have my mobile devices connect only to my router, which is in turn connected to the internet via the hotspot.can use the mfg firmware or be open source firmware, doesnt matter to me.I currently have a Netgear WNDR3700 and a spare WRT54G with DDWRT.
View 3 Replies View RelatedI recently purchased a Linksys EA4500 Dual-Band N900 Router with Gigabit and USB. Everything set up great with no problems and after a day or 2 I managed to get all home devices connected (2 laptops, 2 printers, an iphone, 1 tv, 1 blu-ray, an old desktop, and a tablet). Everything was connected right and working and I installed the Linksys app on my iPhone which let me see what devices were connected and all that. Well, last night, an unknown device showed up as a connected device. It's labeled as: android_(insert string of characters) and has a MAC address. I've tried and tried to identify what this device is and I can't. Everything else on our network is still showing up independently of that device. I'm worried that someone using our connection and possibly putting our device security at risk. What can I do to A) try to identify what the device is and B) if it is an intruder, block it's access.
View 9 Replies View RelatedI have a few desktops in my home network with a new E4200 router. Have to add my wifes Lenovo notebook to the net and activated MAC filtering as addition to the WPA2.Set her MAC address in the filter list. Only one MAC is allowed to access WLAN.An hour later I see in the Filter list four (4) different and unknown MAC adresses added to the list.
View 8 Replies View RelatedI have the WRT400N router with the latest firmware. Recently I have noticed a device in my DHCP that I do not recognize. It is not device I own (believe me, I have racked my brain and confirmed) as it shows as an Acer pc. I cannot ping the IP address however. I have rebooted my router several times thinking maybe it's a former connected device but saved in memory but it keeps coming back. I am thinking possibly it is someone hi-jacking my Internet, but not sure. I am using WEP security but it shows a LAN connection which is strange for a wireless device. The only hard wired pc is my HP.
View 3 Replies View RelatedI am trying to install Cisco Connect for my E1000 but I get the following error each attempt "An HNAP Call to the device failed for unknown reasons" I've already updated the router to 2.1 version of the Firmware.
Full Details
Error code: 82BD0305Error description: An HNAP call to the device failed for an unknown reason.Model name: unknownModel number: E1000Serial number: unknownFirmware version: unknownOperating system: Windows 7 SP 1Software version: 1.3.11069.2Connection type (WAN): unknownIP address (LAN): unknownIP address (WAN): unknownComputer IP address: 192.168.1.132
We had a new linux server installed at a remote office yesterday, unfortunately the guy installing the server forgot to change the IP addresses, doh. It's plugged into a C877 and I can see the port is up/up and I see the mac address using 'sh mac-address-table'. The ip address on the server is unknown but it's unlikely to be in the correct subnet for the vlan it's attached to.
Is there a way I can add an arp entry manually to the router, then ssh to the server and correct the ip address? Or is there some other way to establish the IP address of the server? It's gonna be a pain to revisit the office and there's no one there that can get into the server room to do anything from the console.
I am currently accessing the internet on my home lan with a Linksys wrt54g dd-wrt in bridged client mode (small town wifi to T1 network) with a static IP, but plan to add an additional WildBlue 12mbps satellite connection. What I’d like to do is load share between the two connections with a RV042 dual wan router…. The satellite modem connection to one of the WAN ports and configuring the RV042 as my DHCP server is not a problem, but how I should configure my wrt54g to the dual wan router for load sharing?I suspect a IT professional might understand this intuitively, but I am unsure how to pass through my public address from the Linksys to the RV042 WAN port.
View 2 Replies View RelatedIn my home, I have broadband internet connection, which is Time Warner Cable. I also have an Apple Airport Extreme that shares my internet throughout all of my computers. My current set up runs perfectly but the problem is, I have other devices in my home that require a WEP security key. My Airport Extreme is running on WPA but I don't want to lower it's security to WEP just for those devices. What I'm trying to do is create another separate network which has a WEP security key (Linksys WRT54G). So ultimately, I would like to set up two networks, one is the Airport Extreme and the other Linksys, which both run under the same WAN address provided by Time Warner Cable.
View 11 Replies View RelatedI have a WRT54g v2.2 and want to flash the firmware . When I log intothe routers ip address ,I get a google search listing all sites that talk about the ip address , Not the routers web page to make adjustments. How do I get into the routers page to update firmware ?
View 7 Replies View Related
