Netgear N300 WNR2000v - Unknown Mac Address On Router

Jan 10, 2012

have an unknown mac address listed in my router's connected devices pane. There is no ip address or device name listed. I know the mac addresses of the machines I have put on the internet, and i don't recognize that one. Router: Netgear N300 WNR2000v

View 2 Replies


ADVERTISEMENT

Netgear N300 (DGN2200) Connection - Internet Port Had No Ip Address?

Dec 16, 2011

I recently purchased the netgear n300 ADSL2+ modem router. I have tried all day to get it to work, but I have not have any success.

ISP: Verizon (Now frontier I think)

DSL light will be solid green, along with the port, wifi, etc... But the internet one stays solid red.I've tried changing dns settings and things, but to no avail. Though I am able to login to the router, and I can get internet if I directly connect to the modem.

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersRobert>ipconfig/all
Windows IP Configuration

Host Name . . . . . . . . . . . . : Robert-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....

I noticed in the router settings that the internet port had no ip address, as in it was just 0.0.0.0.

View 19 Replies View Related

Connect To Netgear N300 Wireless Router

Feb 26, 2012

Child at college having significant connections issues with Sony VAIO VPECB trying to connect to Netgear N300 wireless router. Upped the bandwidth - no impact. Other MACs in the house have no issue.

View 1 Replies View Related

Switches :: New Netgear N300 Router Will Not Connect

Jan 29, 2011

I just bought a new Netgear N300 router to go along with the Mediacom cable internet I just signed up for. I can plug the ethernet cable straight from the modem into my computer and get internet. Unfortunately this only works after I run the windows diagnostic to correct the errors that wont allow me internet access (unable to connect to IP address, lack of DNS server) but eventually I get access. The instruction then tell me to run the ethernet from the modem to the router and then another cable to my computer from the router. When I do this, I lose all internet access. I thought I just had to instal the router using the provided disk but it never gets past the internet connection test.I have tried to provide the correct IP address, subnet mask, default gateway and dns servers like requested but clearly I am messing something up.

View 5 Replies View Related

Adding Device To Netgear N300 Router?

Oct 20, 2011

I'm trying to connect a latop (Packard Bell - Easy Note) onto a Netgear N300 wireless router (WNR2000v3).I have already connected a separate laptop which is working fine but the Packard Bell (about 6 years old) wont connect, it will detect my wireless network but then asks for a "Network Key".I'm assuming this the same password that I set up when I configured the router but when I enter it I get the following message:The network password needs to be 40bits or 104bits depending on your network configeration. This can be entered as 5 or 13ascii characters or 10 or 16 hexadecimal characters".

View 3 Replies View Related

Netgear N300 - Finding Security Key For Wireless Router

Oct 23, 2011

I need the security key for my NETGEAR N300 wireless router. I am installing a HP wireless printer.

View 1 Replies View Related

Netgear N300 Wireless Router To Stream Netflix?

Mar 18, 2012

I am using a Netgear N300 wireless router to stream Netflix movies to a Samsung Blu-ray player with wireless LAN. My problem is that some of the movies are not watchable because of rebuffering. About every two or three minutes into a film it rebuffs. Is this because of my equipment, my set-up, or is it just the nature of the beast?

View 1 Replies View Related

Connecting Netgear N300 To 2wire 2701 Router?

Mar 8, 2011

How do you connect two routers together to increase signal through the whole house? I am trying to use the n300 as my main router (its hooked to cable modem) and use the 2wire as an access point.The two are connected by a known good ethernet cable.

View 2 Replies View Related

Unknown IP Address Range On Router DHCP Client List

Nov 19, 2011

I keep getting some additional IP addresses logging onto my home network that have an address outside what should be allowed by the router. The server is running at 192.168.2.1 and is set to only allow clients from 192.168.2.2 - 192.168.2.10 so a total of 9 clients should be allowed on.The problem is that something keeps logging in with an address of 192.168.169.2 or 3 etc. Sometimes more than one device at a time.I have assumed that it is some automated or virtual client as I'm pretty certain my network has not been breached. I have a 9 character password with a relatively random alphanumeric combination, although I haven't tried changing the password (I live in a share house with with a bunch of devices using wireless, so I haven't yet bothered). What I don't understand is how it has connected with the xx.xx.169.xx range at all. I have a Belkin 'Share' Wireless N Modem Router and at some stage there was a 'guest' network but that has since been disabled and I still am seeing the extra address. I have attached a screen shot of the DHCP client list on the router.The following is a list of devices that may be on the network at times, I'm thinking one of these may be responsible for the problem:

Windows Vista Desktop - Only LAN device
PS3
Macbook
Epson wireless printer
Android HTC Desire Mobile Phone
Laptops running various Windows versions (XP, Vista and 7)

A few thoughts I had:

- the android phone is capable of running a wireless hotspot, may have to look into it to see if if has been operating as an access point into the Belkin router, but assumed this wouldn't bring up clients connected to the phone on the home router.

- The desktop has PS3 Media server installed to stream video to the PS3 over the network (not that I have ever managed to get it to work), however this is not ever open on the desktop.

View 10 Replies View Related

Linksys Wireless Router :: WRT54G - Unknown MAC Address Connecting

Feb 16, 2013

I've got a WRT54G v6 that is password protected via WPA2 Personal TKIP+AES, and SSID broadcast enabled. In the Status menu > Local Netork > DHCP Clients Table there is a MAC Address listed that none of my devices have.

View 6 Replies View Related

How To Set Up A Netgear N300 Router For A Closed Home Wireless Network

Apr 8, 2012

We operate a home office network (workgroup) of 6 older PCs running Windows XP SP3.It's a Windows based network using a designated "home" PC as a server, and until recently we were using ethernet cables and a hub/switch for sharing files which worked well because we only share small document files, no music or video.The workgroup does not have a shared internet connection, we don't want or need one for what we do, although the individual PC's can connect to the web using USB dongles just for checking e-mail.Recently the ethernet hub died and I decided to take the opportunity to upgrade to wireless file sharing.None of the PCs have inbuilt wireless adapters so I bought a D-Link USB wireless adapter for each PC.I also bought a Netgear N300 router, thinking that this was suitable entry level equipment for wireless file sharing. Now I'm not so sure.So far I was unable to install the router on the "home" PC because the installation CD seems to assume that the router will be used for sharing an internet connection and does not seem to offer an installation option without a standalone modem. How to install this type of router to create a closed home wireless network without a shared internet connection.

View 14 Replies View Related

Print From HP LJ P1006 Wirelessly When Hookup To Netgear N300 Router?

Dec 23, 2012

I recently bought a practically brand new HP LJ P1006 with an extra brand new HP brand toner cartridge for $1 at a local auction. I have tested it, and it works perfectly, so all is fine there. I would like to know if it is possible to print wirelessly to it at all. I do not have it hooked up to a computer right now, we only have two laptops, so there is not a desktop to have it hooked up to in order to put it on a home network (I believe that is how that works).

I do have a Netgear N300 router with a USB port however, and I was thinking I may be able to do something there.

Is it possible to hook this printer into my router via USB and then be able to print to it from our latptops? If so, how would we go about setting that up to do so?

View 3 Replies View Related

Netgear N300 - Configuring Extender And Router For Limited Access

Mar 26, 2013

I have a Netgear N300 and am using a linksys wrtg54g flashed with dd-wrt as an extender. I would like to setup my wireless network to limit various devices (laptops, iPod touch, etc) to certain times of the day.

How do I configure both devices to limit connectivity? I've got it down pretty much on the NetGear using a MAC address filter and scheduling the services, but I am not sure how to get the extender to do the same.

View 3 Replies View Related

Netgear N300 Router / Windows 7 - Setting Up Network Drive

Mar 23, 2013

I've setup a home network using Netgear N300 wireless router (using Windows 7).

I'm trying to get one of my hard drives to be available on the network, so I went to the "sharing" tab of the HD's properties setting and allowed sharing on the HD and turned off password protection so that you don't need a password to access the HD.I also set the permissions to give full control, change, and read access to the "Everyone" group.

From another computer in the network, I tried connecting to the network HD but ultimately got "Access denied" despite the fact that I gave full control to "Everyone".How do I get the computer to be able to connect to the shared HD?

View 2 Replies View Related

Netgear N300 / Cisco 2950 - Port Forwarding With No Router

Jul 9, 2013

I have been having problems with my router. I have a Net gear N300 v2, but I am not asking for support with said router. Forwarding network traffic from the Internet to a server and then have it properly re-routed. I have never done this sorta thing before, but I want to go into a career in I.T. when I'm older. As a side note, I have already figured out that ditching the router requires to have a software DHCP server, which I am using Windows Server 2008 Data center and it's built in role as DHCP server.

DNS is also configured. The modem a Motorola Surf Board is connected directly to a Cisco Catalyst 2950, and that connects all of the rest of the network, also via a 3Com SUper Stack Hub, and a little 8-port HP Advance Stack J2610A, which connects to all of my wireless AP.

View 2 Replies View Related

Routers / Switches :: Netgear N300 Wireless Router - Cannot Connect To Internet

Feb 27, 2011

I have a Netgear N300 Wireless Router (WNR2000), and I am trying to connect the internet through it. The internet light stays amber, and though the router recognizes it, I can not connect to the internet. My computer also doesn't seem to recognize the router at all. Installation CD will not work either.

View 3 Replies View Related

Netgear N300 ADSL2+ Modem Router Model DGN 2200 - Need To Reboot Every Day

Oct 21, 2012

Nearly every morning/evening I have to re-boot my router to get internet access. Netgear N300 ADSL2+ modem router Model DGN 2200 (had about a year), Windows 7 64bit Home premium Laptop connected wirelessly, Windows 7 64Bit Home Premium desktop connected by LAN cable. ISP BT Internet. Until recently this set up has been working OK with occasional loss of interent access and need to re-boot router. The internet light has been showing red on those occasions. Over the last two weeks I have found that when I turn one of computers on although all lights on router are green I have no internet access. I have to re-boot, then all is OK until the next day when I have to re-boot again. My phone line appears OK with no noise on line, no reported problems on BT broadband staus. The thing that puzzles me is that the lights are all green on the router yet my networking icon on the pc shows an exclammation mark and 'no internet access' and I do not have access to net.The wireless connection is OK with excellent strength.

View 7 Replies View Related

Connect Netgear N300 Wireless Router (wnr2000v3) To Extend Wifi With Ethernet Cable

Jan 22, 2013

I have an arris broadband modem combo and the wifi signal in the basement is poor I tryed to connect a netgear n 300 wireless router (wnr2000v3) to extend the wifi with an ethernet cable but the neatgear router does not have an internet connection.

View 5 Replies View Related

Netgear N300 Dgn2200v1 Adsl2+ Modem Router / Extending Wifi Range For Home Network?

Dec 11, 2012

how to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.

View 1 Replies View Related

Netgear N300 - How To Enable Dmz

May 5, 2011

The first time i had to set dmz i had free tech support from the company. no my free tech support has expired and they want money for tech support now.I would like to know what ip to put in my dmz setting, my ip is supposed to be static, but it changes every few months anyways.I'm aware that having dmz open is a risk, but i have a software firewall.i have my router setup so my 360 and my pc so i need dmz, , if i did not have dmz i would be setting up forward ports for quite some time, as i play multiple pc games.

View 6 Replies View Related

Connecting Netgear N300 Usb Internet

Dec 7, 2012

I recently got an older dell laptop that doesnt have automatic availability to wifi i had purchased a netgear n300 usb internet thing and it still will not connect to my home wifi how do i fix this?

View 1 Replies View Related

Netgear N300 Loses Connection

Mar 26, 2013

Mediacom is my cable provider. They came out a few months ago and thought the problem was their Motorola modem. They replaced it with an RCA (Thomsen) which worked great for about 3 months.Now (3/13) I am losing my connection at least once a day.I started to download the new Netgear Firmware update, but in the middle of that, you guessed it, the connection dropped. So now my router is useless. There's probably a way to reset it, but I haven't found that yet. And so far the Netgear phone # is locked inside the router somewhere! I'm hard-wired to the RCA modem now, so we'll see. I have a feeling, after reading the previous thread, that my connection will be fine.I have my own cable modem, needed for a previous cable provider, and a new Netgear N600 2-frequency router.

View 2 Replies View Related

Get A Netgear N300 To Work With Windows 98?

Jun 26, 2011

I have an old compaq running windows 98. I just bought a netgear n300 wireless usb adapter, knowing there might be compatibility issues.

View 2 Replies View Related

Cisco WAN :: C877 Device With Unknown Ip Address

Apr 24, 2013

We had a new linux server installed at a remote office yesterday, unfortunately the guy installing the server forgot to change the IP addresses, doh.  It's plugged into a C877 and I can see the port is up/up and I see the mac address using 'sh mac-address-table'.  The ip address on the server is unknown but it's unlikely to be in the correct subnet for the vlan it's attached to.
 
Is there a way I can add an arp entry manually to the router, then ssh to the server and correct the ip address?  Or is there some other way to establish the IP address of the server?  It's gonna be a pain to revisit the office and there's no one there that can get into the server room to do anything from the console.

View 5 Replies View Related

Routers / Switches :: Netgear N300 Will Not Respond?

Jul 19, 2011

I just got digital cable, phone and internet and when I try to use the digital phone and internet at the same time, the internet wouldn't work. Its connected through Netgear N300. The wireless connection will not stay connected.

View 1 Replies View Related

New Netgear N300 Dropping A Wireless Signal?

Apr 12, 2011

My linksys never dropped a wireless signal in four years of use, this one has dropped 3 days straight.Dunno about the wireless part of the router; Terry, etaf, any input on the quality of this router?

View 2 Replies View Related

Netgear N300 Dual Band Route Lag?

Jun 25, 2011

I have recently purchased a netgear N300 Dual Band router. I am getting some problems with it! I replaced my bog standard belkin 54g router (which never dropped out, never lagged), you just plugged it in, stuck your isp settings in and away you went. Not the same story with this netgear, it promises to give you a better connection in game, but since installing it, all games lag, my laptop is slow browsing, it is getting to the point where we cannot game at all and I am giving up waiting for websites to load! My xbox is connected with ethernet my laptop is wireless, but both lag. Is it to do with the router settings? I am running windows 7 on the laptop, windows xp on another desktop pc, 2 xboxes, one wired one wireless and a wii wireless. All lag!

View 6 Replies View Related

Netgear N300 Control Panel Does Not Ask For Login

Dec 15, 2011

I set a password and everything on my n300's Netgear Genie, but every time I go to routerlogin or 10.0.0.1, it just shows me the full control panel and never prompts me to log in. Isn't security a bit too lax over there? I even click log out and it says i logged out, then I re-visit and I'm always automatically logged in.

View 3 Replies View Related

Wireless :: Netgear N300 Internet Access Is Disconnected

Oct 10, 2011

I got 3 windows 7 pc's at home. IP V6 and IP 4 are enabled. I setup my wireless system and it worked 100%. After 3 months I add a LAN cable to two of my PC's. This is when it all started. My internet browsing became very very slow. When i shutdown the one machine it become fast again. I did the following. Pulled the LAN cable and it was still slow. I then put the cable back and disabled the Wi-Fi and it still was very slow. I rested the defaults and restored my old backup and it still slow. Now I can get any access to the internet any more. I the disconnected the netgear router and take a cheap router with only LAN ports and it work 100%. All the above i did with many router and server reboots.

View 1 Replies View Related

Setting Up Internet Connection With Netgear N300 USB Adapter?

Jun 8, 2011

I built my first computer today (woot!) but I'm having issues using my netgear N300 usb adapter to access the internet.

I am using a DLink router but for some reason I am getting some weird issues.

First of all, after using the netgear usb adapter, my mac address is something like E0-xx-xx-xx-xx-xx with the xx being the other numbers. Is having a macaddress starting with E0 wrong? All the other 5 devices on my router have mac addresses starting with 00.

Secondly, I am getting a 169.xxxxxx ip address. This is really starting to bother me because I can't set it up using DHCP.

View 8 Replies View Related

Netgear N300 USB Adapter - Connected But No Internet Access?

Nov 4, 2011

My desktop was connected to wireless router by ethernet cable but it seems the ports on the router are now US. Bought netgear N300 USB adapter and installed. Had problems getting "limited connectivity etc" messages 'cos wasn't getting IP address allocated. Have now manually allocated IP address and connection status is now "Connected" (with no warning about limited connectivity etc). However I can't connect to the internet.

View 12 Replies View Related

Netgear N300 - Laptop Showing As Intruder On Network

Jun 6, 2011

Just purchased a new Router and set it up. Powered up my laptop and its showing it as an intruder and isn't allowing it to access the net. How do I solve this and allow it to connect? Router is Netgear N300 Wireless Router

View 2 Replies View Related

Add A Second Wireless Pc To A Netgear N300 Wireless Router?

Dec 6, 2012

How do you add a seond wireless computer to an existing wireless NETGEAR N300 router?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved