Unable To Access Internet Via Secured Wireless Setup
Apr 10, 2012
I have 3 desk tops and 1 Laptop. the desk tops are wireless connected via my Xfinity ( cable Modem) and a Trendnet 652- 300 mgb router setup. Recently installed the
Trendnet router ( initially w/o security). I was able to readily connect to and access all pcs to Internet. However, recently went to Trendnet on line site and installed Router password security. Was able to connect and access the Internet on 2 of the 3 desktop pcs as well as the Laptop. However, 1 desktop ( running on Windows XP Professional, 5.1.2600 SVCPK 3, Optiplex G x 60 ) does not permit access to Internet. Once I get to the screen asking for the password ( network key) , I insert same I receive an error message stating "Network key s/b WEP pr a WPA key".
I am unable to connect to wireless network in my office. the configuration and all worked out just fine and I was able to connect unsecured, however when we put a key on there, I am unable to connect. I am even able to connect to my neighbour's unsecured network and I can connect to our wireless router via Ethernet cable.
I have a Linksys Wireless G Model WRT54G2V1 using WEP encryption. I recently added a laptop. It can access various non-decured netowrks. It can see my home network but is unable to connect despite entering the correct passcode. how to get the laptop and secured network to communicate?
Just a day or two ago I was able to do what the title says, didn't make any adjustments to my E2000 while in it, had to find something though.Anyhow, connecting to http://192.168.1.1 results in "Unable to Connect", etc. Also tried it in IE9, Firefox Beta is my primary, and it still didn't work. Tried using Cisco Connect and it says it cannot connect to my router. I am wired to my E2000, which in turn is wired to my DSL modem (Actiontec GT701D-Its firewall not in use). I sitll have full connection to the internet as well as other wireless deveices do in my house.
I travel some for work. When not traveling my laptop connects directly to my company's intranet via a standard Ethernet connection.While on the road I use a wireless modem to pick up hotels wireless Internet. I connect and then log into a VPN to access my email and websites. This has always worked very easily incubus unsecure public routers.
However twice now , and both times on secure wireless I cannot even connect. My laptop easily finds the signal, usually really strong I click to connect and it never passes " validating identity". I know the secure routers password but it never even comes up to ask for it. Like I said it seems like it only happens on secure wireless routers. In this case it's frustrating because it's when I visit family and their home routers are set up secure with password.
I had an old G router that had an unsecured network. It died and I replaced it with an N router and installed a secured network. I have a cable modem with wires that goes to the router. From the router, I have CAT 4 wires going to several access points around the house. Into one of these acess points, I have pluged in a wireless access point that broadcasts wirelessly---unfortunately, it is broadcasting the old unsecured network. How can I make the wireless access point broadcast the new secured N network?
I'm unable to access the web setup screen from 4 different windows machines running IE 9 or Firefox (various combinations of wireless, wired, etc.). When I get to the certificate error and hit the "yes, i understand, continue", it comes back with a 'can't be reached' page and looking into the details says the 'connection was dropped'. However If I connect from a MacBook / safari, I'm able to reach the page fine (and admin the router).
Using a wrt610n.I am connected to the router, the ip address hasn't changed, the password hasn't changed.I can use the router & connect to the internet.I have the router set to require HTTPS, but switching it to allow HTTP doesn't work. Both Wired & Wireless Win 7 / IE9 machines can't connect.Tried setting the router ip address to 'trusted' zone in IE. Tried setting the router ip address to the 'compatibility' mode in IE. Tried using latest version of Firefox with the same results.
I'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
I have a Cisco 881 setup with the following VPN config.
[code]...
The client is able to connect just fine to the network via VPN, but I am unable to gain access to any of the local resources. I know 192.168.1.1 has SSH running and 192.168.1.50 has telnet running but if I try to connect to either using the correct program they just timeout. I am really at a loss on why the vpn connection connects but I can not gain access to any of the resources on the VPN network.
I have blown the dust of my Cisco 1801 and looked the books out to put a decent router on my network now I am running my own server however I have hit a few bumps but totally stick now.
DHCP is disabled and I can't remember the sub net. Connected with the console cable but finding my admin password isn't accepted. Running the password recovery but unable to access ROMMON using special command > break. I should get this but the ATA monitor library just loads and I get stuck on the password screen.
*** System received an abort due to Break Key *** signal= 0x3, code= 0x500, context= 0x813ac158 PC = 0x802d0b60, Vector = 0x500, SP = 0x80006030 rommon 1 > #
From what I gather (still green behind the ears) the ROMMON command has been disabled. Any way to get into my Cisco or do I need to reload the IOS on the flash card?
My computer sees my network, but I can't connect to the internet wirelessly. If I plug in the Ethernet cable from the modem I can access the internet. So, I've narrowed this down to something with my router.
OS: WIN7 Router: Belkin N750 DB N+
Steps taken:Modem and router have been shut down and restarted.Router has been returned to factory settings and reconfigured.Validated with my ISP there are no issues with my internet service. Router software has been uninstalled, reinstalled I do not use McAfee. I've run a full virus scan, a full malware scan and just for good measure, a defrag. I've checked my firewall.
I live in apartment house that recently had a "professional" (I use that term loosely) sell and install a wireless network for Internet access. I am the only tenant with any knowledge of computers and networking, retired after 30+ years in telecommunications including 7 years in an ISP doing project management. I am also the only user who spends any appreciable amount of time online. The apt owner did not know of my background when he had this guy contracted to do the work. The "engineer" did an inadequate site survey, not thinking of or allowing for RFI, EMI, walls or other obstructions and he neglected to see what the tenants' individual needs were.
The installation was finished more than a week past his due date because "ran out of parts". When he did the individual user setups (he included that in his quote, apparently) he attempted to garner extra business by claiming that the end users' machines were all full of spyware, malware, viruses and worms. At least 3 tenants had brand new machines that had never been connected to the Internet and all three were purchased from different large vendors. I checked the others and out of 17 machines only one had any issues of that type.
There are 3 access points in the building, all with the same SSID to accommodate any tenants wishing to connect anywhere in the building or in the patio area, similar to a hospitality application. Problem:This "engineer" is now refusing to work on the network because he thinks it's a "difference of opinion" when to me, everything points to a possible defective access point or just lousy administration by this guy. The reason I've come to that conclusion is that at random, my secure connection (WPA2) drops and reconnects as unsecured.
The installer is convinced that random dropping, etc is because of my "defective machine" that never had any issues with dropping from a hardwired connection. He told the apt owner that a direct wired connection to the router would not work. Contractually, we tenants cannot contact him directly with service issues. My purpose is just to get decent access.
Have completed a Power Cycle.The affected machine is a HP Elite m9150F desktop. The symptoms include the following:
- neither the LAN connection or the wireless connction will access the internet through Internet Explorer - microsoft email will not send and recieve - Steam will not connect - Norton 360 will connect to live update and download - taskbar icon shows LAN connection is OK - When I open Network and Sharing, the network map shows this pc is connected to internet through named network. - Local Area Connection Status show 197,816 bytes sent and 311,088 recieved.
We have 2 laptops connected to the same wireless network working perfectly. There is also another desktop (Dell 8400) with a LAN connection to the router working perfectly. The affected pc (HP m9150f) is also connected to router with a LAN connection. The D-link Dir-615 wireless router is connected to a Shaw Motorolla modem model SB5102. The HP m9150f stopped connecting a few days ago, other than that, it worked fine.how I managed to get 4 computers running on a network in the first place..
Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
I can not connect to my home wireless network (we did change routers back in Dec and did at that time have problems as well getting it to connect) the router is a Linksys E2000.when I checked further I saw that the IP address was different than the ones on my other laptops so I changed those settings by adding the new IP address..
I am unable to access the internet even though my wireless connection shows as active and strong. I tried the connection hard wired, but still no access. I ran a malware detector and removed two items, still no internet availability. What should I do?The trouble shooting device says "Firewall may be preventing your program from running". I have McAffee security system installed.
I am trying to setup a DIR-601 wireless router (Hardware Version: A1 Firmware Version : 1.00NA ) with my connection from Astound.I am able to connect to the internet from the cable modem (Motorola SURFboard SB5101) but I am unable to get it to work through the router. All the lights on the router look ok.When I look at the WAN status from the router setup page I see :
WAN Connection Type : DHCP Client Cable Status : Connected Network Status : Disconnected Connection Up Time : N/A
[code]....
* I noted that the router did not show me the correct time. Is that normal ?I have even copied my laptop's MAC address but it did not work. I restarted the modem and the router a number of times but to no avail.
I am trying to setup internet access and intranet access using two cards per PC. I don't have sever software and I want to be able to share files between several machines. I have two routers. One that connects to cable modem and one that connects to intranet side. I have assigned different static ip addresses to both cards.
Here is my setup.Using all MAC OSX I have AT&T DSL ISP connected to a (ISP provided) Speedstream 5100 Modem.I just purchased a Cisco Linksys 5200 N Router and I cannot access the internet. I followed the set-up instructions to the T but to no avail. I cannot find anything online about these two devices being incompatable. Do I purchase a new modem? If so how can I be sure it's compatible with the router?
Region : UnitedStates Model : TL-WR702N Hardware Version : V1 Firmware Version : ISP : CenturyLink
I've just received my new TL-WR702N that I want to use as a repeater (downstairs) for my router (upstairs). I've tried the configurations listed on the TP-Link website, but none of them give me internet access. In fact, the local area connection shows the TL-WR702N as an "unidentified network".
I've got a v1 E1000. Lately when I turn on one of my computers, or attempt to connect with my Motorola Xoom tablet it will show connected but I will not have internet access. Initially it will show that I have internet access but not work, then after about 1-2 minutes my PCs will show "No Internet access" for about 2-3 minutes, then it will show "Internet Acess" again and still not load. After that, in about 1-3 minutes the internet will start working and work as good as ever until I disconnect (manually or by turning off my computer) then connect again; the process described avove happens again.
I just bought a Linksys E1500 router and followed the CD instructions for setup. It is wired to my desktop and I am unable to access the internet. If I go direct to the modem and bypass the router the internet works fine
My Dell Laptop is unable to access internet through my Netgear wireless router. Other equipment (Lenovo laptop, ipad, iphone, PS3) accessing internet fine through same router. I ran the onboard Dell Wireless WLAN Card Utility. Hardware diagonistics all pass. Connection diagnostics reports:
Radio Passed Association Passed Authentication Passed Local IP Address Passed
i want to block all internet access on all my computers from the time range of 9 PM to 8 PM. Yes, that gives 1 hour of internet access per day. However, it seems that there are certain rules of the router that won't let me do this. It seems I can't make 2 different policies for PC's within the same IP range (192.168.1.0 to 192.168.1.254) , it gives me the error: "The values you entered are invalid. Please try again."every time I try to do so. And when I try to give the time range from 9 PM to 8 PM it gives an error stating that the end time must be bigger than start time. I am using the WRT54GL with firmware v4.30.7.
Any issue creating a guest vlan to use the WIFI on an 891W router? The IOS is version 15.1. I have created discreet Vlan's and setup subinterfaces on both the WLAN_AP0 and GigaEthernet 0 interfaces with dot1q encapsulation. The client will receive an IP from the pool but cannot ping or connect beyond the default gateway.
The external interface is using Nat overload and all wired clients are successful in connecting to outside addresses. I have insert a permit any statement in the acl which affects the external port but still no success.
I have here a CISCO 877 which i have heard that its great and a good device for VPN. Currently, I am using Broadband internet and looking forward to setup this box in my office for mobile users to access the network. How to setup the internet access through this router as it has ADSL port as WAN interface and i am having broadband connection PPPOE on ethernet. Tried SDM & CCP but it has limited features and is it possible to make FE ports for PPPOE access ?
Here's what I need to do. I have a file server at work that I need to be able to allow our employees to access the files when they are traveling. I know the server's ip address and know how to port forward and how to share certain folders thru windows, but this is all new territory for me.
I have configured my DIR-605L for no security. I want to provide free wireless internet for the guests that come to my house. How do I insure that guests connecting wirelessly to the 605 can access the internet only and can NOT hack into the computers on my internal house network?
I have an ASA 5510. I am doing a new install at our new data center. I am having trouble getting internet access from an inside LAN interface to the outside WAN interface.Our colo center has given us the below IP info. [code]If I do a static config on my laptop of IP 198.145.XXX.82 Mask 255. 255. 255. 240 DG 198.145.XXX.81 I am able to get the web fine from the line in our rack. I used the ASDM software to setup the ASA. I set its WAN IP of 198. 145. XX X. 82 and mask as 255.255.255.40 for interface 0/0. For interface 0/1 I made a management LAN of 192.168.180.1 with mask of 255.255.255.0.I can connect to my LAN ok but do not have outside internet access. I have also tried .80 and .81 for the WAN IP of the ASA. [code]
Ok so I am accessing the Internet by LAN cable hooked up to the (LAN slots?) on the motherboard.After a lightning strike, where there was once 2 yellow lights is now gone.Question is what needs to be replaced because the slots are on the mobo itself.
