D-Link DIR-601 :: Unable To Access Internet Through Wireless Router?
Jul 28, 2011
I am trying to setup a DIR-601 wireless router (Hardware Version: A1 Firmware Version : 1.00NA ) with my connection from Astound.I am able to connect to the internet from the cable modem (Motorola SURFboard SB5101) but I am unable to get it to work through the router. All the lights on the router look ok.When I look at the WAN status from the router setup page I see :
WAN
Connection Type : DHCP Client
Cable Status : Connected
Network Status : Disconnected
Connection Up Time : N/A
[code]....
* I noted that the router did not show me the correct time. Is that normal ?I have even copied my laptop's MAC address but it did not work. I restarted the modem and the router a number of times but to no avail.
View 1 Replies
ADVERTISEMENT
May 13, 2013
Region : UnitedStates
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.1
ISP : T2
I have a problem with my tp-link router. I dont have an internet access of the router, updated firmware... When i connect to router by laptop the internet works fine, but when i connect to router by phone i have an internet access only 5 second and than i lost it, but still connected. I don't know what is the problem here, maybe phone?
View 3 Replies
View Related
Dec 5, 2012
Region : UnitedStates
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
ISP : CenturyLink
I've just received my new TL-WR702N that I want to use as a repeater (downstairs) for my router (upstairs). I've tried the configurations listed on the TP-Link website, but none of them give me internet access. In fact, the local area connection shows the TL-WR702N as an "unidentified network".
View 2 Replies
View Related
Sep 18, 2011
I just bought a WRT54GL which is working perfectly. I needed it to extend my home network for my kids (I have not a very fast internet connection and my kids are eating all of it... With the WRT54GL I can choose how much they can have. So my own network has a netgear modem and a netgear wifi access point which is in this network : 192.168.0.x.
This network is not blocked in any way (just password protected). For my kids network, the WRT54GL gives addresses in this network : 192.168.1.x and is limited in speed. Everything is perfect, I have internet connection on both of my network, There is just the problem that I cannot access my printers, my servers, my computers.... that are on the 192.168.0.x network from 192.168.1.x. Is there a solution ? I already tried to force the WRT54GL to go to 192.168.0.x network but no more connection. Should I "bridge" the two networks ? How can I do it ?
View 1 Replies
View Related
Sep 4, 2011
I'm Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on bothsystems but they cannot see each other in network places. I am unable to sharefiles between the them. I have tried all the procedures mentioned in many forumsbut still not able to find a solution
View 4 Replies
View Related
Jan 22, 2012
Here is my setup.Using all MAC OSX I have AT&T DSL ISP connected to a (ISP provided) Speedstream 5100 Modem.I just purchased a Cisco Linksys 5200 N Router and I cannot access the internet. I followed the set-up instructions to the T but to no avail. I cannot find anything online about these two devices being incompatable. Do I purchase a new modem? If so how can I be sure it's compatible with the router?
View 1 Replies
View Related
Sep 12, 2012
I've got a v1 E1000. Lately when I turn on one of my computers, or attempt to connect with my Motorola Xoom tablet it will show connected but I will not have internet access. Initially it will show that I have internet access but not work, then after about 1-2 minutes my PCs will show "No Internet access" for about 2-3 minutes, then it will show "Internet Acess" again and still not load. After that, in about 1-3 minutes the internet will start working and work as good as ever until I disconnect (manually or by turning off my computer) then connect again; the process described avove happens again.
View 2 Replies
View Related
May 8, 2011
I just bought a Linksys E1500 router and followed the CD instructions for setup. It is wired to my desktop and I am unable to access the internet. If I go direct to the modem and bypass the router the internet works fine
View 3 Replies
View Related
Sep 7, 2012
I have an EA2700 running latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I am unable to access the DHCP Reservations link under Connectivity/ Local Network. When I click on it, nothing happens. I've tried multiple browsers including IE 10 (Windows 8 RTM), Firefox 15, and Chrome 21. I also tried on a Windows 7 machine with IE 9 and the link doesn't work on that either except that it shows a box that says Invalid Character when I click on the DHCP Reservations link. I see no invalid characters on the screen. Any workaround other than downgrading the firmware or assigning static IPs on individual PCs?Also, on an unrelated note, where is the Dynanic DNS configuration on the Cisco Connect Cloud?
View 8 Replies
View Related
Aug 25, 2012
My Dell Laptop is unable to access internet through my Netgear wireless router. Other equipment (Lenovo laptop, ipad, iphone, PS3) accessing internet fine through same router. I ran the onboard Dell Wireless WLAN Card Utility. Hardware diagonistics all pass. Connection diagnostics reports:
Radio Passed
Association Passed
Authentication Passed
Local IP Address Passed
[code]....
View 1 Replies
View Related
Sep 1, 2011
i want to block all internet access on all my computers from the time range of 9 PM to 8 PM. Yes, that gives 1 hour of internet access per day. However, it seems that there are certain rules of the router that won't let me do this. It seems I can't make 2 different policies for PC's within the same IP range (192.168.1.0 to 192.168.1.254) , it gives me the error: "The values you entered are invalid. Please try again."every time I try to do so. And when I try to give the time range from 9 PM to 8 PM it gives an error stating that the end time must be bigger than start time. I am using the WRT54GL with firmware v4.30.7.
View 5 Replies
View Related
Feb 22, 2011
Since I got my TP-Link 1043ND working in a previous thread I thought that my second router could be in good use at my brothers house about 50m from mine.I've got a modem in the basement, it's wired to the first router (TP-Link), the TP-Link sends wireless signals to five units, one of those units are my brothers computer. The Internet works fine on every unit.Now I thought maybe my brother will have better wireless signals to the first router if I connect a second router between. I guess the second router should be working like a switch then.I have the both routers MAC addresses. I got inside the first router and entered the WDS option, I chose LAN instead of Disabled and entered the second routers wireless MAC. Then I took the first routers MAC and entered it in the second routers WDS options MAC and Enabled it. It didn't work so I entered Static Routing Table on the second router and entered the first routers IP (started with 85.228) which I found in the dd-wrt menu. Then I entered same Netmask as the first router and the same Gateway with the interface LAN. No Internet access thou from the second router.The second routers LAN IP is set to 192.168.1.3 (the second router has 192.168.1.2 as LAN IP). DHCP is set to disabled at the second router. The funny thing is if I set the second router to the same LAN IP as the first router and the same DHCP settings with DHCP enabled it says that I have Internet Access but I can't enter the Internet
View 4 Replies
View Related
Jan 14, 2011
I have managed to get the wireless portion of my router working for the two wireless laptops in my house (one is Win XP, the other Linux) and am now trying to connect via rj45 ports + ethernet cat5e cable, my router and desktop computer that is running Windows XP. My connection type, set when I setup my wireless router, is pppoe.I have my router connected to a SpeedStream Modem, my ISP is Bell.I am worried that I will have to purchase a hub/switch in order to allow the desktop (PC3) to access the internet, although it seems to me (from reading other internet postings) that what I am attempting to do should work with just the modem+router setup that I have.I haven't worked with Windows LAN networks before (wired, not wireless) I have only dealt with my laptop's wireless internet connections and it seems much simpler to deal with than wired lan connections.
View 1 Replies
View Related
Mar 19, 2013
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : MAXIS
I've got an issue with my TL-MR3040. Need assistance.- Modem HuaweiE398 (Identified) and connected to internet as seen on the webgui. Connected to my TL-MR3040 via wireless and connected BUT no internet access to the web.Tested using RJ45 cable to direct connect PC to Router, NO ISSUE with internet access to web.Need to know is my TL-MR3040 got defects or faulty?
View 1 Replies
View Related
Mar 6, 2007
Has anyone managed to access the Storage Link from the internet on the WRT350N router? I am on my second one and it still doesn't work. Also the configuration restore does not work either.
View 9 Replies
View Related
Jul 23, 2012
I am able to connect to TPlink router through my pc but unable to access internet.The router is unable to detect dynamic ip.
View 1 Replies
View Related
Feb 3, 2013
Lost connection to Internet though router appears normal. Belkin router, MacBook.
View 1 Replies
View Related
Jan 15, 2013
Region : Hongkong
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version :
ISP :
I have installed a mini router type MR3020.I have set it up to WISP mode in order to get wifi signal from my main router and be able to deliver wifi to other devices The main router is working fine and I can access internet with no problem.However, the mini router, which detects the main router, is unable to supply internet connectivity. The ip addresses in teh WAN part under network is zero. Though I tried many times to renew the ip address I was not able to get a valid IP address.
View 2 Replies
View Related
Dec 22, 2012
Have completed a Power Cycle.The affected machine is a HP Elite m9150F desktop. The symptoms include the following:
- neither the LAN connection or the wireless connction will access the internet through Internet Explorer
- microsoft email will not send and recieve
- Steam will not connect
- Norton 360 will connect to live update and download
- taskbar icon shows LAN connection is OK
- When I open Network and Sharing, the network map shows this pc is connected to internet through named network.
- Local Area Connection Status show 197,816 bytes sent and 311,088 recieved.
We have 2 laptops connected to the same wireless network working perfectly. There is also another desktop (Dell 8400) with a LAN connection to the router working perfectly. The affected pc (HP m9150f) is also connected to router with a LAN connection. The D-link Dir-615 wireless router is connected to a Shaw Motorolla modem model SB5102. The HP m9150f stopped connecting a few days ago, other than that, it worked fine.how I managed to get 4 computers running on a network in the first place..
View 19 Replies
View Related
May 7, 2013
Region : India
Model : TD-W8951ND
Hardware Version : V5
Firmware Version :
4 lan ports problem in my modem. Able to get internet through wifi but unable through lan ports.checked in 2 pcs and 1 laptop
View 1 Replies
View Related
Apr 10, 2012
I have 3 desk tops and 1 Laptop. the desk tops are wireless connected via my Xfinity ( cable Modem) and a Trendnet 652- 300 mgb router setup. Recently installed the
Trendnet router ( initially w/o security). I was able to readily connect to and access all pcs to Internet. However, recently went to Trendnet on line site and installed Router password security. Was able to connect and access the Internet on 2 of the 3 desktop pcs as well as the Laptop. However, 1 desktop ( running on Windows XP Professional, 5.1.2600 SVCPK 3, Optiplex G x 60 ) does not permit access to Internet. Once I get to the screen asking for the password ( network key) , I insert same I receive an error message stating "Network key s/b WEP pr a WPA key".
View 4 Replies
View Related
Jun 23, 2011
I can not connect to my home wireless network (we did change routers back in Dec and did at that time have problems as well getting it to connect) the router is a Linksys E2000.when I checked further I saw that the IP address was different than the ones on my other laptops so I changed those settings by adding the new IP address..
[code]...
View 1 Replies
View Related
Aug 22, 2012
I am unable to access the internet even though my wireless connection shows as active and strong. I tried the connection hard wired, but still no access. I ran a malware detector and removed two items, still no internet availability. What should I do?The trouble shooting device says "Firewall may be preventing your program from running". I have McAffee security system installed.
View 1 Replies
View Related
Dec 27, 2011
Today I bought a TP-Link 150 Mbps Wireless PCI Express Adapter so I can pick up the internet connection in my house from my home PC. (We use a laptop most of the time which is able to pick it up fine).I've installed the wireless adapter into the computer and installed the drivers however I receive an error message:
"The device may not be present or could have been ejected/unplugged from the system. Insert of Reinsert Now."
View 13 Replies
View Related
Mar 31, 2013
Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : TM UNIFI
I have recently bought a dual band router to replace the aging default router supply by the ISP.
After setting up, I found the message "No Internet Connection". I have checked the log and found that PPPoE was connected. However I am connect to the internet.
View 7 Replies
View Related
Feb 15, 2013
Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : : 3.13.17 Build 120426 Rel.29216n
ISP : Sky
I am trying to setup my ftp site.My internet address appears as FTP Server Configuration
Server Status: Started
Internet Access: EnableDisable
Service Port: (The default is 21, do not change unless necessary.)
Internet Address: 192.168.0.3
How does my ftp site get active, it keeps the 192.168.0.3 address.I have enabled and saved hoping this will allow it, but no joy.
View 11 Replies
View Related
Jan 23, 2013
Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 121106
ISP : unifi
i just bought this router and upgraded the firmware. but i cant seem to get Internet connection up and running. it says connected but its not. tried both 121106 and 121226 firmware, still the same. when i checked the connection it says DNS server not responding.
View 7 Replies
View Related
Oct 5, 2011
I am using wireless internet via D link router.I am connected to the router but there is no access to the internet.There is a small yellow triangle appearing on the wireless Network icon at the right bottom corner of my laptop.I can browse and download but I am getting the message that no internet access.
View 10 Replies
View Related
Apr 8, 2013
Any issue creating a guest vlan to use the WIFI on an 891W router? The IOS is version 15.1. I have created discreet Vlan's and setup subinterfaces on both the WLAN_AP0 and GigaEthernet 0 interfaces with dot1q encapsulation. The client will receive an IP from the pool but cannot ping or connect beyond the default gateway.
The external interface is using Nat overload and all wired clients are successful in connecting to outside addresses. I have insert a permit any statement in the acl which affects the external port but still no success.
View 7 Replies
View Related
May 10, 2013
Region : India
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : S/N: 12B79605315
ISP : BSNL Data One
I had Purchased a brand new TP-Link WifI Modem Router TD-W8961ND with S/N : 12CB5200872 from [URL] and it got delivered few days back. When I am trying to connect it to the internet the modem is not getting connected nor configured. The Power button light, ADSL Light and internet light are continuously blinking and nothing is getting steady. The modem is appearing to be a damaged piece of modem and it is very unfortunate that we have got a modem from flipkart in an unserviceable condition. It came with a warranty of 03 years and I wanted a replacement so that I can use the modem for connecting internet.
View 1 Replies
View Related
Jan 7, 2013
I am having a problem in setting up my Router. Its "TP-LINK WR 720N". I have a LAN connection in the main PC and a further dialer like thing with user name and password is executed to access the internet. Each of the customers have diff IDs and passwords based on the bandwidth of the connection. The problem is that first am i connecting the Router in the right way? I put the main LAN cable into the Router's WAN port and the Other Ethernet wire i put is that from PC's Lan port to Router's LAn port. Is this right? I am confused because in the guide a modem is also mentined and i think thats for DSL users...
If i use the above settings, my LAN gets connected and the dialer also works and gets connected but when i access the internet from it, that doesn't work and no webpage opens.
Similarly, the Wireless connetion is displayed in the Laptop and when i access it, it gets connected, but it has a yellow exclamation mark in it, and the same goes here that the internet does not work. My internet connection id fine because i am sing internet no using main Lan ports of Pc, so i guess the problem i s with my Settings...
View 2 Replies
View Related
Jul 27, 2012
I've had my DIR 615 router for quite some time. The hardware version is C1, firmware 3.01 originally. It's been fine for the most part (asides from connection issues now and then with the internet - which we rectified by unplugging modem and/or router). A couple nights ago we had a storm and the next morning the router would not connect to the internet. I tried unplugging the router and modem a number of times but could never establish a connection. The internet globe LED was originally orange but after I cut off the power, it never came back on. I tried a number of different cables between the modem and router and could not fix the issue. I bypassed the router totally and the internet works fine. After a lot of failed attempts, I decided to reset the router and reinstall it with the disc. I followed the instructions and kept getting error 322 that the router could not be found. I tried 3 different computers and 5 different wires to fix the problem but to no avail. I kept encountering the same error on each computer. Since the router can't be seen, I must bypass it totally to get any internet access so trying the online setup doesn't work because I can't connect to the router and then to the modem since there is no internet access. So now I'm stuck. I'm not sure if my router is damaged from the storm. All other lights work (LAN and wireless icon) but I can't get any internet access through the router. I'm not sure if I should just go buy another router or not. The installation checks out fine until connecting power to the router and then it can't be found.
I am running windows 7 and vista on different computers and laptops and used setup 4.1.7141.2
View 1 Replies
View Related
Mar 11, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
I set my TL-MR3020 to AP to act as a repeater to boost my wifi signal in the living.My TL-MR3020 is able to ping the main router but there is no internet access (no Internet light) on the TL-MR3020 . The main router ip is 192.168.1.1 and TL-MR3020 IS 192.168.254.0I followed exactly the instructions on how to configure the TL-MR3020 from TP-Link website and everything seems ok except no internet
View 3 Replies
View Related
