Cisco VPN :: 881 Setup - Client Unable To Gain Access To Network Resources
Jun 18, 2012
I have a Cisco 881 setup with the following VPN config.
[code]...
The client is able to connect just fine to the network via VPN, but I am unable to gain access to any of the local resources. I know 192.168.1.1 has SSH running and 192.168.1.50 has telnet running but if I try to connect to either using the correct program they just timeout. I am really at a loss on why the vpn connection connects but I can not gain access to any of the resources on the VPN network.
View 3 Replies
ADVERTISEMENT
Sep 25, 2011
connectig two computers into one modem
View 2 Replies
View Related
Nov 24, 2011
I want a simple remote client-initiated VPN for employees to access corporate resources from home simultaneously with being able to access the internet. I am using CCP and seem to have several options including Easy VPN server, SSL VPN. I also can choose "Full Tunnel" or not.I have a 2911 router. I have a static range of internet IP addresses. The router is already functioning with inside to outside and outside to inside NAT, etc.
View 1 Replies
View Related
Aug 16, 2011
I have VPDN running on our Cisco 1921 router running 15.2(1)T. Previously I was using Cisco 2801 router running 12.4(24)T4. I copied the config from the 2801 to the new 1921 router before replacing the router but now the VPDN isn't working.
Basically the users can connect and authenticate to the VPDN, but once they get the IP 192.168.12.10-20 IP, they can't access the internal servers (i.e. 192.168.12.120).
Is there any bug in the 15.2(1)T relating to VPDN?
Here's the VPDN section of the config:
vpdn-group TESTVPDN
! Default PPTP VPDN group
accept-dialin
[Code].....
View 5 Replies
View Related
May 19, 2011
I have recently deployed a Cisco ASA 5510 Security plus firewall on my companies network, but there is a problem that I am finding hard to get by and I think it is ASA related.
From (inside we are not able to hit any of our sites that are on the (outside). I have nat policies in place to translate the public to private, but I think I that I need some thing more. This seems to be occuring mainly with our external web sites as well as another animoly with regards to FTP (but it may be fixed if the http issue is resolved.)
I was hoping some with a lot more knowledge on ASA firewalls than my self can spot the error in my run-cfgs.
[code]....
View 15 Replies
View Related
Dec 15, 2011
got problems connecting to any internet connection on a lenovo G555 laptop with a atheros AR9285 wireless network adapter. Can access all the connections with a different laptop but not my lenovo so I know it is not a problem with the routers.Tried doing a system restore, tried disabling the network device then re-enabling it, tried switching the wireless on and off as well as restarting the laptop but no luck.
View 1 Replies
View Related
Jun 12, 2011
The Linksys is connected to a cable modem and a Dell Vostro system, the Netgear is connected via Cat 5 to the Linksys and the Linksys is the DHCP provider to the Netgear.The Vostro shares hard drives, folders and printers to the networkBoth have wireless and wired users.They are each DHCP providers to their users.How must I configure each to provide users on both routers access to all network resources
View 2 Replies
View Related
Jan 24, 2012
I have two places that I work out of. One is in Romania and one in Bulgaria. In Romania, I have a small office/home network set up. It has at least 8 computers (including the three that I have with me currently - some wireless and some towers) and a couple of android phones and Ipods. I have no trouble accessing any of the computers shared folders or them accessing mine. There are a varity of operating systems used there from XP, Windows 7 and Mac.Everything works great. All the computers can access each other shared resources. All the computers are set to get IP automatically from my DLink DIR - 600 router. I have brought my three computers to Bulgaria (tower and two laptops). They are all set the same- no changes in settings. However, in Bulgaria, All three computers CAN access the internet but NOT each other.
[code]...
View 14 Replies
View Related
Nov 26, 2012
I'm working on setting up a couple of new WAN sites with 256K frame relay circuits back to our main building. Each new site has a new PVC, and both are pointing back to a PVC on a T1 at the main building. The main site has a 2801 with a single CSU/DSU WIC, and each new site has a 1841 with a 3560 connected to fa0/1. At both sites, I'm able to get the circuit up, and the serial interfaces at both new sites show up/up, and the subinterfaces at the main site also show up/up for both sites. Routing is being done by EIGRP, and both sites are able to establish the 2801 as an EIGRP neighbor, and I'm able to ping/tracert anywhere on our network by name or IP, so routing and DNS appear to be working. I can also ping both new routers from the main site. However, that's about all I can do. I'm not able to access any resources on our network (email/shares/internet/intranet/etc) from the two new sites. I can ping the new routers/switches from the main site, but can't ssh to them. I can ssh to them locally. There are no firewalls in the equation, and I don't think there are any ACL's in the picture either.
Can ping and tracert just fine anywhere on our network (from both the 1841, a PC plugged into the 3560, or a PC plugged directly into the fa0/1 port on the 1841), including out to the internet, by name or ip.Can ssh to local router, but not to anything that isn't localDNS is workingDHCP not working using ip helper pointing to DHCP scope on server at main site, have to use static IPCan't rdp to anythingCan't get emailCan't browse windows sharesCan't get to any websites, external or intranet. IE says "Website found, waiting for reply..." but eventually times out.
I did some testing for communication over certain port numbers using telnet and nmap, and found the following:
Can telnet to url.. and local intranet webserver on port 80 (http)Can telnet to two of our Exchange Servers on port 25 (SMTP)If I run an nmap scan on url...com, or our intranet webserver, it confirms that 80 and 443 are open, but the pages will not load. I am able to telnet (port 23) to a state mainframe via the internet that some of our employees use, and I do get the expected login screen. I tried erasing the config one of the new routers, and just added back the bare minimum config to get the circuits up (serial/ethernet interface configs, eigrp), but saw the same symptoms.
One other thing to note: the 2801 at the main site has three other frame relay sites connected to it on the same WIC as the new sites, all of which are working fine.
I just don't understand why I can ping everywhere I need to be able to ping, and port scans show that communication is open over needed ports, but the applications don't work.
View 1 Replies
View Related
Dec 6, 2011
I have setup a VPN connection on a 891 router. I can connect to the VP both but am unable to ping or access any resources on the remote network.
Here is my running configuration:
[code]...
View 5 Replies
View Related
Dec 24, 2011
I have easy vpn on my PIX 515e and working normally everywhere, except when my users go FRANCE, the vpn client connect, but, can't ping or access any inside network resources. when same user try any where here in EGYPT, it works normally.
View 2 Replies
View Related
Oct 22, 2009
After I change my router, I recently found out that I cannot access remote network resources after VPN tunnel is established. I use CISCO System VPN client. I can see the connection is successful. I cannot ping server on the remote network
View 2 Replies
View Related
Dec 24, 2012
I bought this router from a rummage sale, and it works great. The only problem is, I cannot access it to set up a password. I have downloaded the manual, and tried the troubleshooting. I disabled the firewall, did the reset button on the back of the router, but all I keep getting is "The Connection Has Timed Out" error message. I also went to the emulator site, but it said that there was no support any longer for that model. I have tried this on both Internet Explorer and Firefox. I personally have Windows 7, and on Comcast.
View 4 Replies
View Related
Nov 15, 2012
Normaly all incoming IP addresses can use NAT to gain access. I would like to make a rule that only one IP address can connect to my router and use that port or range of ports defined.
Is there a way to configure a SRP 527W on such a way?
If not possible now, can I expect a software update ?
View 3 Replies
View Related
Apr 12, 2011
I want to set up our ASA5505 firewall to allow access from the Cisco VPN Client software.I have nstalled the client software then tried using the VPN wizard to set up the connection without success, I am running Windows 7 32 bit and Cisco client 5.0.03.0530. [code]
View 22 Replies
View Related
Nov 23, 2012
Trying to setup client VPN access on a 1841 router. essentially i would like to connect using the cisco vpn application.
View 2 Replies
View Related
Apr 10, 2013
Just got my Linksys EA4500 router today.The only confusing thing, not not well explained by Linksys . Is the USB storage set up.One thing (very important) Linksys has failed to explain how to gain access to the USB storage once connected to the router. Once the USB storage drive it set up. Or at least I think it's set up. Nothing shows up on my network page. So how am I to get access to the drive? If it don't show up?I need to know how to gain access to the USB storage drive that is connected to the Linksys router.
This is how I think it is to be set up. Again the instructions are not all that clear how to set up. And where is this widget on the homepage to be located?
View 4 Replies
View Related
Mar 15, 2011
We currently have a company network set up with a PC acting as a shared resource containing shared folders for everyone to access (approx 30 users)The network is comprised of a business internet connection to a 5 port router which is then connected to a 5 port switch connecting to 4 computers and another switch which is connected to another 4 computers and again to another switch - this continues for approx 30 - 35 computers.We have 2 shipping databases connected to the first switch (2 of the for first computers mentioned) and about 15 of the 30 clients need to access these. Because there is this many people on the network we are running really slow and losing access to the databases/shared files on the network.We do not have the expertise or time/money to set up a true server/client network.We are moving to a bigger building and potentially hiring 10-20 more people.We are thinking about having a small (5port router) and branching it off to 2 24 port gigabit switches and the business folder and having one switch contain the 2 databases and all the users who need to access it and the other switch containing all the other users.
View 18 Replies
View Related
Aug 4, 2011
On my Windows 7 laptop, after connecting to my office Network using Cisco VPN clientThe entire Internet is utilized by the VPN. I am unable to browse the internet on my computer till I disconnect the VPN Client.
View 3 Replies
View Related
Aug 22, 2011
Very recently, we had implemented Site-to-Site VPN tunnel between two Linksys RV042 4-port VPN routers. Everybody in our remote site is accessing and sharing the data through this tunnel and it is working fine.
Now, we have a plan to implement the same for our mobile clients also. For this, we had followed all the basic configuration procedures and user got connected to Quick VPN tunnel. Here is a problem we had observed. The mobile client user is connected to the tunnel, but unable to access the office LAN from the PC.
View 1 Replies
View Related
Feb 19, 2013
I have access to network 10.3.1.0 /24 but I am not able to access 10.3.2.0/24 and other networks behind the Easy VPN server.I am using a software client to connect to the server.I have configured split tunnel to the network 10.3.0.0 /16 and it shows up in the route details too. I can ping 10.3.1.0 network but not 10.3.2.0 and so on.The Easy VPN server is configured on Cisco 861 with VPN module. [code]
View 6 Replies
View Related
Jun 5, 2012
I have an ASA 5510 running v8.4(3)9 and have setup a remote user VPN using the Cisco VPN client v5.0.07.0410 which is working appart from the fact that I cannot access resources on a secondary subnet.The setup is as follows:
-ASA inside interface on 192.168.10.240
-VPN clients on 192.168.254.x
I can access reources on the 192.168.10 subnet but not any other subnets internally, I need to specifically allow access to the 192.168.20 subnet,[code]
View 3 Replies
View Related
Sep 4, 2011
I recently purchased a Cisco 2911 to replace my Cisco 1711 router. I copied the configuration from the Cisco 1711 router to the Cisco 2911 router. Everything seemed to work correctly except when I VPN tunnel into the Cisco 2911 router using Cisco's VPN client version 5.0. I can ping the router LAN interface from my PC that is VPNed into the router but I can no longer ping or access the devices on the LAN side of the router as I did on the Cisco 1711 router. I don’t see errors in the log or hits blocking anything in the acls. It’s using the same configuration that I had on the Cisco 1711 router, and this did work on the Cisco 1711. The Cisco 2911 router is running IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1).
Here is the VPN clinet portion of the configuration: The LAN is addressed as 192.168.0.0/24. The router LAN interface is 192.168.0.1, which I can ping and access. I can't ping or access anything on the LAN (192.168.0.0/24) beside the router.
aaa authentication login vpnclientauth local
aaa authorization network vpngroupauth local
!
crypto isakmp client configuration group remote-clients
key 6 xxxx
pool clients
[Code]....
View 11 Replies
View Related
Oct 5, 2010
I have a Cisco 881 and I want to use Easy VPN.
-VLAN 1: 192.168.4.0
-WAN: 10.0.0.0
-VPN: 192.168.8.0
VPN connects and I get an IP of 192.168.8.100 from my pool. I can ping my cisco at VLAN1 (192.168.4.1), but I cannot access my local resources. I guess I miss a NAT configuration.
View 11 Replies
View Related
Feb 9, 2011
I've set up a VPN using a fortigate 50b wifi and forticlient ipsec VPN. when I log into my office from home, I cant see anything on my network at all. I can however remote desktop into other PC's and can access stuff that way. I was under the assumption that ... one a VPN connection is made in the LAN you should be able to see other pcs and servers in the workgroup. Is this not the case or do i need to configure something?
View 2 Replies
View Related
Apr 10, 2012
I have 3 desk tops and 1 Laptop. the desk tops are wireless connected via my Xfinity ( cable Modem) and a Trendnet 652- 300 mgb router setup. Recently installed the
Trendnet router ( initially w/o security). I was able to readily connect to and access all pcs to Internet. However, recently went to Trendnet on line site and installed Router password security. Was able to connect and access the Internet on 2 of the 3 desktop pcs as well as the Laptop. However, 1 desktop ( running on Windows XP Professional, 5.1.2600 SVCPK 3, Optiplex G x 60 ) does not permit access to Internet. Once I get to the screen asking for the password ( network key) , I insert same I receive an error message stating "Network key s/b WEP pr a WPA key".
View 4 Replies
View Related
Mar 17, 2013
I have created a VPN connection for ASA 5512-X by using the wizards and nothing seems to be wrong on the wizards's config.I am able to connect to the network by using the VPN but unable to ping internal network.Below is my config for your reference:
Result of the command: "sh run"
: Saved
:
ASA Version 8.6(1)2
!
hostname FAA-ASA-1
enable password crzcsirI44h2BHoz encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code].....
View 6 Replies
View Related
Aug 19, 2011
I have an RV042 with the PPTP server configured, which is working because I can connect with my iPad and droid phones, however, I'm unable to access resources on the RV042 side (192.168.1.X) when my local network is the same ip scheme (192.168.1.x). It works fine when I'm on a different network like 3G or someone else's Wifi network (192.168.11.X).
View 1 Replies
View Related
May 24, 2011
I have 3 networks coming from the DMZ (VPN) and only one works:10.132.24.0/24 Not working10.132.25.0/24 Not working10.132.26.0/24 Working The thing is, the one that works is on the same network as the DMZ(VPN) interface. The other two do authenticate and they get an IP from the VPN Pool. but they just cant access anything.
View 11 Replies
View Related
Apr 24, 2012
I am connected with qvpn, I can log in to the router bios remotely, but when I try to map the network drive from my remote location it does not work.I can detect the machine on the network, but it will not go further and tells me that "said IP was found but could not locate G". Does this mean it is behind a firewall on server side and that I need to create a rule to allow the incoming traffic? Or could it be something else.
View 1 Replies
View Related
Feb 24, 2011
I am having an issue with my Cisco VPN Client. I am new to VPN setup, so this is probably something easy I am missing. I have a 2611XM router acting as my internet gateway for my local lan, and my VPN Server. I am doing all my testing from a company laptop with a mobile broadband card. The VPN will connect, but anytime I ping anything within the inside network, it comes back with the public IP of the outside interface. I have NAT overload configured so everything on the inside network can access the internet, which it looks like might be causing my problem.
When i remove the nat overload on my fa0/1 interface, the vpn will connect to any resource on the inside.
View 9 Replies
View Related
Nov 9, 2012
I have blown the dust of my Cisco 1801 and looked the books out to put a decent router on my network now I am running my own server however I have hit a few bumps but totally stick now.
DHCP is disabled and I can't remember the sub net. Connected with the console cable but finding my admin password isn't accepted. Running the password recovery but unable to access ROMMON using special command > break. I should get this but the ATA monitor library just loads and I get stuck on the password screen.
*** System received an abort due to Break Key *** signal= 0x3, code= 0x500, context= 0x813ac158 PC = 0x802d0b60, Vector = 0x500, SP = 0x80006030 rommon 1 > #
From what I gather (still green behind the ears) the ROMMON command has been disabled. Any way to get into my Cisco or do I need to reload the IOS on the flash card?
Here is my event log/putty output
Event log
2012-11-09 19:59:47 Opening serial device COM6
2012-11-09 19:59:47 Configuring baud rate 9600
2012-11-09 19:59:47 Configuring 8 data bits
[code]......
View 4 Replies
View Related
May 12, 2012
Just a day or two ago I was able to do what the title says, didn't make any adjustments to my E2000 while in it, had to find something though.Anyhow, connecting to http://192.168.1.1 results in "Unable to Connect", etc. Also tried it in IE9, Firefox Beta is my primary, and it still didn't work. Tried using Cisco Connect and it says it cannot connect to my router. I am wired to my E2000, which in turn is wired to my DSL modem (Actiontec GT701D-Its firewall not in use). I sitll have full connection to the internet as well as other wireless deveices do in my house.
View 1 Replies
View Related
