Linksys Wireless Router :: WRT610N No Access To Edit Any Settings On The QOS Page

Mar 11, 2012

I entered some QoS settings and now when I load the QoS page I get this Javascript error message in Firefox.Error: missing ) after argument list Source File: [URL]. Line: 100, Column: 47 Source Code: QosList[0] = new QosEntry('0','3','0','Kathy's Mac','3', infor);

Basically, the Javascript chokes on any computer name that you enter that has an apostrophe in it. As a result, I don't have access to add or edit any settings on that page. Seems like a major rookie mistake, especially for a major network device manufacture.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT610N V1 Flashing Power Light / No Wireless / Can't Access Settings

Apr 28, 2012

Everything was working fine. Changed Nothing on the router. Goes out and now wont broadcast a wireless signal, cant manually reset the router, or get into the settings with 192.168.1.1
 
Currently I am wired through it with my desktop and its working, but not much else.

View 3 Replies View Related

Linksys Wireless Router :: Wrt120n Unable To Access Settings Page

Jan 6, 2012

Have a PS3 that will connect to my wrt120n if I unplug the modem and router then plug back in after 2 minutes. if I shut off my PS3 or after approx 1 hour, PS3 drops my connection. I'm trying to access my router page online but after entering the default into my browser, the pop up box will not accept any combo of entries to allow me access. I have an SSID name and my router is password protected. It does not connect me when I use any combo of user name or password or the default "admin".

View 2 Replies View Related

Linksys Wireless Router :: Wake On LAN WRT610N Settings?

Oct 22, 2011

how to set up my router settings/port forwarding to be able to use Wake on Lan with Depicus here is what I currently have:DHCP Reservation with the IP Address of my computer (192.168.1.xxx) and the MAC address xx:xx:xx:xx that I retrieved by doing ipconfig /all in the cmdMy Router address is 192.168.1.1 and the submnet mask is 255.255.255.0my DDNS service is disabledIn the Security tab, I unchecked Filter anonymous internet requestsIn Applications and Gaming, under single port forwarding, I have port 7 to 7, Both TCP and UDP, forwarded to the IP address of my computer 192.168.1.xxx and it is enabledMy network card is configured already, enabling WOL in the card's properties.Now when I use Depicus, I enter the MAC, my external IP address which I got from myipaddress.com, subnet mask I use 255.255.255.0, I select Internet, and then the remote port I use is 7,Doing that, nothing happens at all. however, I can easily wake up my computer if I am connected to the same local network at home.

View 3 Replies View Related

Linksys Wireless Router :: WRT610N - What Needs To Be Done In Settings To Create VPN Server

Jan 24, 2012

We have a WRT610N wireless router in our office.we want to setup VPN server through a static ip.we dont know what needs to be done in the router settings to create a VPN server. (necessary port forwarding etc)??

View 8 Replies View Related

Linksys Wireless Router :: WRT610n Unable To Login Config Page Via HTTPS

Jul 13, 2012

I'm having wrt610n and there is an issue, i can login to the config page via http, but using the same computer i'm not able to login there via https but the same time i can login via ipad and the other computer, using the https.i even tried to reset the router settings, but the result was the same, so what PC option can cause it?

View 6 Replies View Related

Linksys Wireless Router :: WRT610N - HTTPS Secure Login To Admin Page?

Mar 29, 2013

I am trying to log into my WRT610N version 2.0 Router  admin page 192.168.1.1 using the secure HTTPS://192.168.1.1 protocol I have the router local management setting to allow both http and https access login:192.168.1.1/Management.asp I am using Microsoft IE version 10 and Firefox version 19.02 and latest Chrome browsers and none of them will work using the HTTPS protocol.This used to work in the past using older versions of the browsers though I would see a certicificate error warning.I have 2.00.01 build 15 firmware installed and I already tried reseting the router.  Perhaps the router needs new firmware update to handle this with the latest browsers?

View 6 Replies View Related

Linksys Wireless Router :: WRT610N Displays Garbage When Accessing Page In Internet Explorer

Mar 26, 2013

Linksys WRT610N displays garbage when accessing the "Wireless Page" in Internet Explorer (from Windows 7 or Windows 8)My issues is simmilar to one reported here: url...Accessing my Linksys Wireless Router model WRT610N using IE opening "Wireless" page displays full screen of garbage characters (looks like chinese).

View 2 Replies View Related

Can't Access Router Settings Page

May 13, 2012

I am having a problem accessing my router settings page. everything was working fine and then all of a sudden my desktop couldn't get internet but all the laptops could so I tried everything power cycling the everything changing the Ethernet cable and I got nothing. So then I hard reset my router and erased all the settings and now it works so I have internet just fine and right away after I hard reset I could access my router settings page and input all of my settings like DNS servers and port forwarding and changing my SSID etc. but now every time I try and go to it it just won't I don't even get the login prompt nothing. So why I can't access this page. Here is a copy of my ipconfig /all. Also when I ping 192.168.0.1 I have no packet loss.

Edit:I have gotten it to work in IE I have to go to HTTPS://192.168.0.1 and then click go to site anyways after it gives me a warning about the certificate being invalid and I have to allow it or whatever otherwise it won't bring up the login prompt. Also the same thing is happening for FF so I need to go to https://192.168.0.1 and click I understand the risks and add exception for it to work.

Windows IP Configuration

Host Name . . . . . . . . . . . . : Andrew-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

[code]....

View 2 Replies View Related

Linksys Wireless Router :: E3000 - Can't Connect To Router Settings Page

Dec 25, 2012

When I try to go to192.168.1.1 it says connection interrupted.  If i use the Cisco Connect it tells me i am not connected to the internet.  My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly.  I can go online, I just cant get to the router.  

View 9 Replies View Related

Linksys Wireless Router :: WRT610N - Access USB Drive From Anywhere?

Apr 15, 2012

What do I have to do to be able to access the USB drive I plugged into my WRT610N from anywhere, on any computer?
 
Currently, I just plugged it in, went to \WRT610N in windows explorer, and mapped it as a network drive, adding a few files to try out.
 
So what do I need to do now to access it from any computer that has internet?

View 1 Replies View Related

Linksys Wireless Router :: Cannot Access USB Storage On WRT610N From Computer

Mar 4, 2012

I am uable to access my files on the USB Storage Device connected to WRT610. Its configured properly. I can see the drive on my network. When I double click it asks for password which I enter and it takes me to the shared folder. But when I click it it says Not Accessible....You donot have the persmission. FTP works fine.I have noticed that on the disk page in the Shared Folder Area when you click on the Summary, the box with Groups With Access is Empty. Whereas on the FTP area in the same summary it clearly mentions the admin group.I have tried every thing including factory reset, hard reset, using new group, new user name etc..The technician from Linsys even spent an hour on my computer and ultimately he gave up and gave me number to contact technical support.

View 1 Replies View Related

Linksys Wireless Router :: WRT610n As An Access Point Through WET610

Nov 26, 2011

I have the following network configuration. Linksys E4200 is a main router which connects directly to internet. I have also a couple of WET610 bridges. One of them sends internet through WAP610 (linksys access point - works fine). Another one is still free, so I would like to share internet from the second WET610 through my WRT610n router. I tried to use the same setting as people recommended for direct cable connection of two routers (WRT610n WAN -> main router's LAN; DHCP and NAT on WRT610 turned off, WRT610's IP differs from the main router's IP), but it doesn't work in my case (WRT610n WAN -> WET610 -> wireless -> E4200). Unfortunately WRT610 doesn't see DHCP (so no one of clients receives proper IP, I can't reach my network if I connect to WRT610, I can't reach WRT610 from my network).

View 3 Replies View Related

Linksys Wireless Router :: Set Colliding Access Restrictions In Wrt610n?

Sep 14, 2011

I want to set up access restrictions to one MAC address (my kid's machine) basing on week days. From Su to Th allow less access time while during Fr-Sa afternoons access time should be longer. The question is how to program it in router. I know I can set rules with "allow" and "disable" keyword, but I don't know rules preference. When I set (Su-Th 6-21) allowed access time then router automatically denies defined machine internet access outside this time range. The problem is in the power of thus calculated denying time. I want to allow more access time in weekend, so I hoped if I can simply add "Fr-Sa 6-22:30 allowed access time" rule. I hoped that router will regard explicitly set time over inexplicitly set  time but it appears it is not so. What are their preferences/priorieties, iis it possible to stack more rules affecting one MAC address or it is so simple that the first rule "rulez"? Is it possible to set more than one time rule affecting the one machine?

View 4 Replies View Related

Linksys Wireless Router :: WRT610N Internet Access Policy

Jan 9, 2011

The Internet Access Policy feature of my WRT610N router doesn't appear to work, at all, zip, nothing, nada. I have setup the feature todeny access to one of my laptops for everyday 24 hours a day, but it can still use the net...

View 5 Replies View Related

Linksys Wireless Router :: WRT610N Network Connected - No Internet Access

Jul 8, 2011

My main pc is running Windows 7. It is also running MS Windows firewall and anti-virus. It connects fine to the internet via an ethernet connection to the WRT610N.
 
I am trying to access the internet wirelessly from another pc running Windows XP. The wireless pc indicates it is connected to the network with excellent signal strength. It will not connect to the internet. I can successfully ping the router but it is unsuccessful when pinging an internet address.
 
An additional wireless pc (WinXP) and my phone (Android) also show connected to the network but will not connect to the internet.
 
These wireless computers used to be able to access the internet before we moved house. They only thing I think that has changed is the addition of Windows firewall and anti-virus. It may however be something else.

View 1 Replies View Related

Linksys Wireless Router :: Wrt610n Unable To Access Web Setup From 4 Different Windows 7

Feb 22, 2012

I'm unable to access the  web setup screen from 4 different windows machines running IE 9 or Firefox (various combinations of wireless, wired, etc.). When I get to the certificate error and hit the "yes, i understand, continue", it comes back with a 'can't be reached' page and looking into the details says the 'connection was dropped'.  However If I connect from a MacBook / safari, I'm able to reach the page fine (and admin the router).
 
Using a wrt610n.I am connected to the router, the ip address hasn't changed, the password hasn't changed.I can use the router & connect to the internet.I have the router set to require HTTPS, but switching it to allow HTTP doesn't work. Both Wired & Wireless Win 7 / IE9 machines can't connect.Tried setting the router ip address to 'trusted' zone in IE. Tried setting the router ip address to the 'compatibility' mode in IE. Tried using latest version of Firefox with the same results.

View 3 Replies View Related

Linksys Wired Router :: WRT610N - Cannot Access Wireless Router Through BEFSR41

Jan 14, 2011

Have an Actiontec GT704 feeding DSL into a BEFSR41 which is connected to a WRT610N. Can access internet, modem and wired router from desktop. Can access wireless router from laptop. Cannot access internet from laptop or wireless router from desktop. Changed ip address for wireless router to 192.168.2.1 so no conflict with modem or wired router.

View 3 Replies View Related

Linksys Wireless Router :: WRT610N Connected To Switch Not Providing Internet Access?

Dec 25, 2012

I just moved in to a new place and have connected my Wireless router (WRT610N) to my switch located in the smart panel in the basement (SE2500). Plugging my ultrabook in to the wall confirms that the signal from the switch in the basement is being sent up, however if I plug my wireless router in to the jack and connect to the wireless router I have no internet access.

View 3 Replies View Related

Linksys Wireless Router :: Configure Access Point As Repeater For 2.4 GHz Band On WRT610N?

Jun 22, 2010

I'm very dissatisfied with the range and signal strength of my new WRT610N dual band router compared to the WAP54G Access Point I used before.Can I configure the Access Point as a repeater for the 2.4 GHz band on the WRT610N if I use the WRT610N as a Wireless G router rather than wireless N? 

View 5 Replies View Related

Linksys Wireless Router :: Can't Access WRT610n Setup / Management Pages Wirelessly

Aug 23, 2011

I cannot access the WRT610n setup/management pages wirelessly from my Macbook using safari.  I can access the router via wireless from iPhone and PC and I can access it from the Macbook via ethernet cable.  
 
When I try to access the router from the Macbook I just get "Contacting..." in the  Safari status line and eventually it times out.
 
I can access the internet using Safari via WRT610n wireless.  The only page I can't access is the router's management page.

View 7 Replies View Related

Linksys Wireless Router :: WRT610N V2 Access Restrictions Menu Is Missing In Admin Gui

Nov 18, 2011

I 'd like to use the access restrictions capabilities of the WRT610N v2. Unfortunely the "Access Restrictions" menu is missing in the admin GUI; I 've got all the others : "Set -up", "Wireless", "Security", Storage, Applications and Gaming, Administration and Status. I've checked the Firmware already and i'm using the very last one available on the cisco web site. I also noticed that I do not have the "Linksys by Cisco" text on the upper left corner as one can read on user guide but just "Cisco".

View 5 Replies View Related

Linksys Wireless Router :: WRT610N Router Should Not Be Able To Access Web Site

Sep 15, 2009

We'r using Linksys CISCO WRT610N and WRT310N wireless router.Our requirment using web access restriction is that we've to Block some website and the corresponding setting is going to be applicable to all users who are accessing internet through this router. The people who are accessing internet through corresponding router should not be able to access web site which are restricted in Router setting. There is the Setting with name "Web Access Control etc etc ".

View 9 Replies View Related

Linksys WRT610N Wireless System With WPA-PSK Security / Security Settings Does Not Match

Mar 29, 2012

I have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.

View 7 Replies View Related

Netgear DGND3700 USB Storage - Unable To Edit Settings For Shared Folder?

Dec 13, 2011

Have just had a stab at using my Netgear DGND3700's USB drive sharing - I had a spare external HDD + I want to be able to access files on it both over the 'net and from local network. Both work fine, very easy to set up, however I am unable to edit settings for the shared folder, which means I am unable to password protect it.

I don't need a password for local sharing but obviously it isn't ideal to have files freely available on the Internet, have looked into troubleshooting but can't find any similar stories with Netgears.I click "edit" or "create network folder" and it loads for a second or two but just stays on the same page. There is only one option to select but I have tried clicking the radio button first anyway, then clicking edit, same result.

View 1 Replies View Related

Linksys Wireless Router :: WRT54GS - Can't View Setting Tab To Edit

Sep 18, 2011

I have WRT54GS I can't view the setting tab to check or change. It seem the tabs are light in color and I click on them. I did have a virius which I got rid of. I have removed the linksys software and re installed

View 1 Replies View Related

Linksys Wireless Router :: Way To Access Set Up Page For Secondary WRT300N

Aug 13, 2012

Since the secondary router WRT300N uses the same default IP 192.168.1.1 as the primary installed router EA4500, any attempt to log onto the set up page results in diversion to the Cisco Connect Cloud for the primary router.
 
Is there a way to access the set up page for the  secondary WRT300N, bypassing the main router intervention via the Cloud  software?

View 3 Replies View Related

Linksys Wireless Router :: Cannot Access WRT54G Setup Page

Jan 19, 2013

I have a WRT54G router that I have not used for many years, but now I need to use it again. I have connected it between my modem and PC, and I am able to get an internet connection on the PC, but I am unable to connect to the router's configuration page. I have tried resetting the router numerous times (holding the reset button 5 seconds, 10 seconds, even longer) to reset the IP address to the default 192.168.1.1 address, but still cannot access the page. The power LED is on and the WLAN and Internet LEDs are on, and the LED for the port my PC is connected to is on. The hardware version of the router is v3. I tried downloading the latest firmware, but without being anble to communicate with the router at the IP address I cannot update the firmware. How can I go about connectiong to the router's setup page? When using ipconfig, the Default Gateway appears to still point to my ISP's IP address instead of the router's.

View 9 Replies View Related

Linksys Wireless Router :: Can't Access WRT160n Setup Page

Oct 16, 2012

I have updated the WRT160n firmware and, since then, I couldn't access the setup page anymore. I could still use the router as a switch, but couldn't access the setup page and configure it as a router.

View 5 Replies View Related

Linksys Wireless Router :: Cannot Access E1200 Setup Page

Nov 29, 2012

I'm able to connect to the internet through my E1200 router but I cannot access the router set up page. 192.168.1.1 doesn't work... I can connect to it just fine with my laptop however... so I changed it to 192.168.254.1 as per some internet instructions. Still can't connect via my desktop... Tried ipconfig /flushdns to no avail. Cleared the internet cache Upgraded the firmware (via the laptop) rebooted the computer rebooted the router... reset the router... After rebooting the router I can type in the username and password to access the router, but it never connects....

View 6 Replies View Related

Linksys Wireless Router :: Can't Access Setup Page WRT54GS

Sep 9, 2012

I need to set up a password for my wireless network, but every time I try to access the setup page, the router stops responding.  I've gotten as far as it asking for username and password, where I enter admin as the password....and then nothing.  The connection times out.  I really need to protect my network.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - How To Access Setup Page

Apr 27, 2012

When I had DSL, my WRT54G was my DHCP master for my home network.  When I got AT&T U-Verse, their "gateway" became the DHCP master and also the wireless access point.  But the signal was not strong enough where I wanted to use it, so I hooked up the WRT54G again.  I discovered that if I connected the U-Verse gateway to the "Internet" port on the WRT54G Linksys, then my home network was split in two, which I did not want.  The WRT54G access point is physically somewhat distant from my wired computer, so I wanted to keep the U-Verse gateway as the DHCP master. (The U-Verse gateway is a router with four "computer" ports but no "Internet" port.)
 
I followed instructions on the Linksys web site, and using my wi-fi connected computer I re-programmed the WRT54G to be "Disabled" as a DHCP server.  Then I powered down and physically connected the U-Verse gateway to a "Computer" port on the WRT54G.  This solved my problem:  my distant wi-fi computer now has a good signal, and both computers "see" each other.
 
However, now I seem to have lost access to the WRT54G setup "web page."  Is it possible to access the innards of the WRT54G when its DHCP service is disabled?  Or would I have to reset the device to factory configuration and start all over if I wanted to make any tweaks?

View 3 Replies View Related

Linksys Wireless Router :: 1721 - Can't Access Setup Page

Jul 11, 2012

My internet is T1 by Verizon. My mom's company Siemens pays for our internet because she works from home as medical tech support on the phone. Okay so the T1 had to be laid out to our house underground I think because where we live, other brands of internet aren't available. The T1 goes from the box outside into our basement and hooks up to a Cisco 1721 modem. From the 1721 the internet goes out to a wireless router that is sitting right next to it. This wireless router is a Linksys WRT160N V2. We have several cables coming out of the WRT160N V2 to go to the first floor for hardwired connections, but one cable goes to the attic and connects to a second wireless router. The second wireless router is a Linksys E2000. We have several cables coming out of the E2000 that go to the 2nd floor to serve as hardwired connections.Okay so let me explain where things went wrong.

After a storm our power went out. Eventually the power came back on, but every now and then our internet would shut off for like half a day then turn right back on, so our internet was getting really really spotty. The [b]AL[/b] light on the Cisco 1721 would come on every time the internet went out. It was so bad that my mom had to get an aircard from verizon to get internet. So after two weeks of spotty service and arguing with verizon trying to get them to come fix the problem, they said try resetting your wireless routers because they might have "bad data" in the lines causing spotty connection. So we reset the wireless routers by holding down the reset buttons on the back. Well.. this reset all of the settings for the routers which Cisco facilitated set up, and now our wireless routers are out of warranty date so they can't set the wireless routers back up. However, we have copies of the online wireless router set up page, so we thought maybe we could just set them up ourselves.Well the problem is... We don't know how to connect to the wireless setup pages.. I read something on the internet about setting up wireless networks and to type 192.168.1.1 into our browser(Mozilla Firefox) and that would bring us to the wireless setup page. But the page does NOT ever come up.

Another way to find the IP address of our wireless routers would be to try going to the cmd and typing in ipconfig and using the Default Gateway IP address for the browser to connect to the setup page but that doesn't work out either.... Right now I unhooked the Linksys WRT160N V2 and hardlined the Cisco 1721 to the Linksys E2000 to a PC on the second floor because I figured it wouldn't work out if we had two wireless routers running at the same time. Currently the browser is taking me no where at all. It just says "Connecting..." but nothing is loading up at all.I tried hardlining from the Cisco 1721 to my mom's laptop, which is her work computer, and I got no response at all. I figured it might just be her work computer that was messing up and not allowing her to hardline into the 1721 so I tried hardlining the Cisco 1721 straight to the PC desktop on the second floor(we have no other laptops other than my mom's work laptop) and nothing went through. Then my dad says the Cisco 1721 has been configured so it doesn't direct connect, meaning that it has to go through a wireless router.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved