Linksys WRT610N Wireless System With WPA-PSK Security / Security Settings Does Not Match
Mar 29, 2012
I have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies
ADVERTISEMENT
Dec 26, 2011
I have a WRT610N (v2) router and I recently updated the firmware to the most current version 2.00.01 build 15. I can no longer set WPA2 security for both bands (used to work just fine). Every time I try to save settings for WPA2 for the 5 GHz band, it tells me it was successful but then displays that the security mode is disabled (and it shows up on my computers list as not having any security enabled. If not, where can I get a copy of the old firmware that worked?
View 8 Replies
View Related
Jan 2, 2013
My wife's laptop will disconnect from our ATT Netscape router/dsl modem. The error we get is that the "security types do not match" ultimately we have to reboot the router and then her laptop will connect for a while. (we do not have this problem with any other devices that use this wifi connection.
View 1 Replies
View Related
Dec 25, 2011
I need to change how my security is set on my wrt54gl... it has been so long I don't know the name or password I put it under.
View 1 Replies
View Related
Jul 16, 2011
I just set up a DPC3825 router, and I wanted to use WEP security settings so my DS Lite can connect to the internet, but it appear the only options in the Wireless > Wireless Security dropdown list are :
WPA-Personal
WPA2-Personal
WPA or WPA2-Personal
Disable.
View 4 Replies
View Related
Dec 31, 2012
just set up my EA6500 in bridge mode, i have the Ethernet cable plugged into the EA6500's yellow WAN port, is that correct, Cisco Article ID: 24583 is not that clear, Cannot also seem to access the EA6500's settings to setup security?
View 2 Replies
View Related
Feb 24, 2012
Comcast service went down in our neighborhood and when it came back up my internet was down and all five LED lights on my Linksys router are solid green. Tech support tells me that I have to reset the unit to get it to function again.It's been a very long time since I set up the home network and while I'm pretty sure I can make my way through setting up from scratch (I'm assuming resetting goes back to factory settings) I was hoping there was a way to reconnect the router to the modem while retaining all the current security and settings.
View 2 Replies
View Related
Sep 11, 2011
I have E4200 with fixed ip 192.168.1.2, DHCP off connected through LAN ports to FIOS ActionTec as 192.168.1.1. When connecting through wireless network off the E4200, I can obtain and connect fine under Guest network and WEP security, but for any other security setting, WPA, WPA2, Mixed mode, etc. I get the message "Aquiring network address" forever, and I never get a connection.
View 1 Replies
View Related
Feb 2, 2012
My toshiba tecra m2-s730, running windows xp, won't connect wirelessly to the internet. It finds my wireless network, but when i type in the network security key, it says it doesn't match the one on my router. All my other computers connect fine, and this one will connect when using an ethernet cable.
View 6 Replies
View Related
Jun 16, 2012
I have a new WAP54G Access point in our network. I would like to change WPA security settings, but am not able to do it.I have done everything as installation leaflet says, and I get to the 5th point Status sheet: Firmware version v.304, MAC address (numbers), IP address 192.168.1.245, SSID linksys, Channel channel 6 and WEB security Disable
What I would like to do, is change SSID and have WPA2 security. When I am clicking "Yes", it goes to the next sheet "Password", I write admin and click "Enter". I will have Pop-up window "Setup Access violation at address 0049BDB6 in module 'Setup.exe'. Write of address C933016A."
View 2 Replies
View Related
Nov 24, 2012
I have a links wireless system, I am trying to make this a secure connection. I have gon into the property settings and everytime I try to set the security to wpa2 or even wpa it I lose my internet connectivety. I can't get the security key needed.
View 1 Replies
View Related
Dec 11, 2011
I have Wi-Fi on my smartphone and I want to set up another lap-top and it is asking for a security key, where do I find it ?I already have one lap-top set up !
View 1 Replies
View Related
Sep 4, 2011
I have an older D-Link DGL-4300 wireless router, I've purchased a wireless home security system and can't seem to get the 2 connected. I've tried resetting the router & modem (powering down & waiting from 1-5 minutes), and my router just won't read the port that I've plugged the security system ethernet cable into.I think the problem is my firewall but I don't know how to set it to allow the router to read the port that I've plugged into, or it could be the firewall that my anti-wirus has or possibly both.My equipment is Comcast cable, router (as noted above) and a D-Link DCM-202 modem, Windows XP 3, and Norton anti-virus. Now I also have my phone through Comcast and it has it's own modem.
View 7 Replies
View Related
Oct 22, 2011
how to set up my router settings/port forwarding to be able to use Wake on Lan with Depicus here is what I currently have:DHCP Reservation with the IP Address of my computer (192.168.1.xxx) and the MAC address xx:xx:xx:xx that I retrieved by doing ipconfig /all in the cmdMy Router address is 192.168.1.1 and the submnet mask is 255.255.255.0my DDNS service is disabledIn the Security tab, I unchecked Filter anonymous internet requestsIn Applications and Gaming, under single port forwarding, I have port 7 to 7, Both TCP and UDP, forwarded to the IP address of my computer 192.168.1.xxx and it is enabledMy network card is configured already, enabling WOL in the card's properties.Now when I use Depicus, I enter the MAC, my external IP address which I got from myipaddress.com, subnet mask I use 255.255.255.0, I select Internet, and then the remote port I use is 7,Doing that, nothing happens at all. however, I can easily wake up my computer if I am connected to the same local network at home.
View 3 Replies
View Related
Aug 21, 2011
I'm building a security camera system,which can connect to internet to be viewed from away.The camera receiver connects to the modem with a Cat 5 ethernet cable,which results in a cable running across the room. My modem is a wireless type,but the camera receiver only has cable support it seems.
Is there a device that I can use to get rid of the Cat5 cable in this scenario?
View 2 Replies
View Related
Mar 12, 2011
where do i find my security key for my wireless setup
View 2 Replies
View Related
Sep 12, 2012
I forgot my router security code number but still working i want to need make new secure
View 1 Replies
View Related
Jan 24, 2012
We have a WRT610N wireless router in our office.we want to setup VPN server through a static ip.we dont know what needs to be done in the router settings to create a VPN server. (necessary port forwarding etc)??
View 8 Replies
View Related
Jan 16, 2012
how to change security settings so my kids can go online on their nintendo ds lite. we have d link router. 192.168.0.1
View 1 Replies
View Related
Mar 11, 2012
I entered some QoS settings and now when I load the QoS page I get this Javascript error message in Firefox.Error: missing ) after argument list Source File: [URL]. Line: 100, Column: 47 Source Code: QosList[0] = new QosEntry('0','3','0','Kathy's Mac','3', infor);
Basically, the Javascript chokes on any computer name that you enter that has an apostrophe in it. As a result, I don't have access to add or edit any settings on that page. Seems like a major rookie mistake, especially for a major network device manufacture.
View 1 Replies
View Related
May 24, 2011
Can I clone an XP system with CSA 6.0.2 installed? I saw the document about 5.x, but I was wondering if that had changed for 6.0.2.
View 1 Replies
View Related
Apr 28, 2012
Everything was working fine. Changed Nothing on the router. Goes out and now wont broadcast a wireless signal, cant manually reset the router, or get into the settings with 192.168.1.1
Currently I am wired through it with my desktop and its working, but not much else.
View 3 Replies
View Related
Apr 17, 2011
One of our clients just installed a new security system and they need to be able to view the cameras from outside the network. According to the vendor, we should only need ports 81 and 2000 forwarded to the internal DVR on both TCP and UDP. They really aren't much troubleshoot the network config.
ASA Version 7.2(4)
!
hostname ciscoasa
domain-name ********
enable password ******** encrypted
passwd ******** encrypted
[code].....
View 2 Replies
View Related
Mar 17, 2012
I am trying to open internet through wi-Fi but my system is asking for network security Key and I am unable to find it out.
View 3 Replies
View Related
Apr 22, 2013
I keep getting a pop-up message from my firewall ( Sygate personal -free ) telling me that NT Kernel and system has been blocked. I checked the box to say don't show this message again, it still shows it every time. minutes in between. It freezes my pc and screws up any typing i'm doing at the time. According to the application list it is checked to allow and running.It is not listed in Task Manager.
View 3 Replies
View Related
Nov 1, 2012
A N600 Router Model F9J1102v1 router first installed in July 2012 with WPA-PSK, MAC Address Filtering and "Self Healing" enabled would not allow a new PC to connect via an RJ45 port. Belkin support ask for the unit to be reset to factory settings which is done and the Security system re-enabled again. Valid MAC Addresses start to be added and midway a PC is discovered in the Network without its MAC address added. Closer scrutiny reveals that another unknown device has also found a way into the router and that the 'Block' option on the MAC list is also failing to work. Anyone think of what one should do with this security shambles other than turn the thing off quick?
View 7 Replies
View Related
Dec 3, 2011
We purchased a new monitor to the pc where the router is connected. Since then, my laptop does not connect to the internet. My network is on the list but it says "The settings saved on this computer for network do not match the requirements of the network" and the Connect button is not active.
View 1 Replies
View Related
Oct 30, 2012
I am trying to set up e-mail on my Nexus 7 tablet and need the security code on wifi settings.
View 1 Replies
View Related
Jun 11, 2011
I suspected her router... however I took it to my home to try it out on my router (whihc works fine on all our computers here).... and the same problem.. her computer says it's connecting.. accepts the WPA key etc.. but still no internet appears. when you hit diagnose on the failed window.. it says firewall or security settings are preventing acccess to internet!
View 2 Replies
View Related
Jan 19, 2013
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies
View Related
Apr 20, 2013
Some security tools and techniques for wireless LAN??
View 1 Replies
View Related
Mar 25, 2013
My windows fire wall wont work. It keeps showing me that as a result of error, the firewall cannot display settings. All attempts to open or turn on the firewall is unsuccessful
View 10 Replies
View Related
Jan 1, 2012
need passwords for netgear 1 wifi . free
View 2 Replies
View Related
