Change Security Settings On DLink Wireless Router?
Jan 16, 2012how to change security settings so my kids can go online on their nintendo ds lite. we have d link router. 192.168.0.1
View 1 Replies
ADVERTISEMENT
DLink N150 Router - How To Find Or Change Wireless Security Key
Aug 22, 2012Have D-link N150 wireless router as access point working with D-link DLG4100 wired router Forgot password for N150. How to find or reset it?
View 1 Replies View RelatedLinksys Access Point :: WAP54G - Change WPA Security Settings?
Jun 16, 2012I have a new WAP54G Access point in our network. I would like to change WPA security settings, but am not able to do it.I have done everything as installation leaflet says, and I get to the 5th point Status sheet: Firmware version v.304, MAC address (numbers), IP address 192.168.1.245, SSID linksys, Channel channel 6 and WEB security Disable
What I would like to do, is change SSID and have WPA2 security. When I am clicking "Yes", it goes to the next sheet "Password", I write admin and click "Enter". I will have Pop-up window "Setup Access violation at address 0049BDB6 in module 'Setup.exe'. Write of address C933016A."
Protocols / Routing :: DLINK-615 Router Best Configuration Settings?
Jul 25, 2011i have a dlink-615 router and im wondering if i can configure it the best way possible to work best with wireless devices, like my laptop.there are 4computers running on my network and i want to get the best result possibly for my connection.can i change settings in the routers configuration page so 1 computer can have 90% of the signal or bandwidth of the connection.i want to decrease the other 3family members connectivity to my router, like limit their use of the network or signal/speed/bandwidth strength?
View 1 Replies View RelatedLinksys Wireless Router :: WRT160NV2 - Get Screen To Pop Up To Change Settings?
Sep 11, 2012I have a computer that is connected to a linksys wireless router model WRT160NV2. I also have a laptop. I have never set up a lock or anything on my wireless connection and I think other people are using it. When I type the IP address 192.168.1.1 on my laptop, I do not get the screen to pop up to change my settings. Do I need to do this from the computer?
View 1 Replies View RelatedDLINK DIR 615 Router Settings - Internet Connect Using Dynamic IP Address
Nov 13, 2011i have internet connection which is connect using dynamic ip address but if i add ip address in Local Area Connection i get two networks, one is internet dynamic ip & other one is ip which i setup in Local area connection. so if i select LAN network for lan clients i can access lan. but now i have DLINK DIR 615 router so what should be my settings?
View 3 Replies View RelatedLinksys Wireless Router :: Change Username / Password In Settings For EA4500?
Oct 25, 2012How do I change the username password in the router settings for the linksys ea4500? It only lets me change the password, I cant find an option to change the username.
View 3 Replies View RelatedLinksys Wireless Router :: WRT54GL - No Internet Connection After Change Settings
Nov 24, 2011I've had my WRT54GL for a few months now and have two computers that are wired and 3 that are wireless. I started having problems with conflicting IP's a couple days ago on one of my wired computers which was set for auto DHCP so I changed the settings and made it a static IP, this is when the problem started. I have Network Magic on all computers and even though it says I'm connected to the internet and the network, I am not able to get online. My other wired computer has been on Static IP for months and works fine.
View 9 Replies View RelatedTp-link Wireless Router Security Settings?
Sep 12, 2012I forgot my router security code number but still working i want to need make new secure
View 1 Replies View RelatedLinksys WRT610N Wireless System With WPA-PSK Security / Security Settings Does Not Match
Mar 29, 2012I have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies View RelatedLinksys Wireless Router :: DPC3825 - Can't Select WEP Security Settings
Jul 16, 2011I just set up a DPC3825 router, and I wanted to use WEP security settings so my DS Lite can connect to the internet, but it appear the only options in the Wireless > Wireless Security dropdown list are :
WPA-Personal
WPA2-Personal
WPA or WPA2-Personal
Disable.
Linksys Wireless Router :: Access EA6500 Settings To Setup Security?
Dec 31, 2012just set up my EA6500 in bridge mode, i have the Ethernet cable plugged into the EA6500's yellow WAN port, is that correct, Cisco Article ID: 24583 is not that clear, Cannot also seem to access the EA6500's settings to setup security?
View 2 Replies View RelatedHow To Change Security On Netgear Wireless Router
Mar 15, 2011How to change wireless netgear security
View 1 Replies View RelatedChange The Password On A DLink Wireless Modem Dwl2100ap?
Jun 22, 2012change the password on a d-link wireless modem dwl2100ap
View 1 Replies View RelatedLinsky Router - Change Network Settings?
Feb 5, 2011When I set up my Linsky's Router,I set it up for 2 old computers (I can do 3 on it.) I bought a new laptop & added that. I no longer own the 2 older computers and would like to remove them & add my sisters laptop + the newer laptop she gave my little girl. I would also like to change it so that it is password protected instead of closed so that family & friends who visit may get online as well.
View 3 Replies View RelatedLinksys Wireless Router :: WRT300N - Reconnecting To Modem While Retaining All Current Security And Settings
Feb 24, 2012Comcast service went down in our neighborhood and when it came back up my internet was down and all five LED lights on my Linksys router are solid green. Tech support tells me that I have to reset the unit to get it to function again.It's been a very long time since I set up the home network and while I'm pretty sure I can make my way through setting up from scratch (I'm assuming resetting goes back to factory settings) I was hoping there was a way to reconnect the router to the modem while retaining all the current security and settings.
View 2 Replies View RelatedLinksys Wireless Router :: E4200 - Acquiring Network Address In WAP / WAP2 Security Settings
Sep 11, 2011I have E4200 with fixed ip 192.168.1.2, DHCP off connected through LAN ports to FIOS ActionTec as 192.168.1.1. When connecting through wireless network off the E4200, I can obtain and connect fine under Guest network and WEP security, but for any other security setting, WPA, WPA2, Mixed mode, etc. I get the message "Aquiring network address" forever, and I never get a connection.
View 1 Replies View RelatedN150 - How To Change Security On Netgear Wireless Router
Mar 4, 2013How to change security on Netgear N150 wireless router ( set it to no security)?
View 1 Replies View RelatedNetgear Router - How To Find Or Change Wireless Security Key
Oct 13, 2012I have a netgear router need to know how to and the security for my wireless.How to find or change wireless security key
View 1 Replies View RelatedLinksys Wireless Router :: Unable To Change E1000 Security
Aug 21, 2011I have a Linksys E1000 wireless-n router. I bought the router originally so I could get my Nintendo DS on Wi-Fi. I then realized that DS games require a WEP Key, but my E1000 defaults to WPA/WPA2 mixed mode. My laptop and my Wii connect online with the default settings just fine. My 3DS also seems to be able to connect with the internet router, but not Wi-Fi, for some reason. So when I'm on Cisco connect, I go to Router settings, it brings my web browser to "http://192.168.0.1". From there I go to the Wireless tab, and then click on Wireless Security. I've tried multiple times to change the Security Mode to WEP, and even disabled security. But after I save the settings, the connection on my laptop is lost, and I have to reboot my router all over again, and am back with the default WPA/WPA2.
View 1 Replies View RelatedLinksys Wireless Router :: WRT160N - Change A Security Code?
Oct 17, 2012I have a WRT160N that I've been using with my HDTV for months. Now I want to connect a BluRay player to it, but the setup requires me to enter a security code, and the one I had for the router doesn't work. Can I change the number, or at least double-check the number I do have?
View 4 Replies View RelatedLinksys Wireless Router :: Can't Change Security Mode On WRT54G
Dec 28, 2008I'm trying to change the wireless security mode on my folks' WRT54G to see if I can get the wireless adapter on their new TIVO to talk to the router. It looks like TIVO only does WEP, not WPA. I get into the wireless page of the router and when I try selecting anything but "WPA Personal", the selected choice flips back to "WPA Personal" in less than a second. I've updated the firmware but no change.
View 9 Replies View RelatedLinksys Wireless Router :: Can't Change Security Mode From Disabled
Aug 30, 2012Trying to secure Linksys WRT54G V8 wireless router. Can't change security mode from 'Disabled'!?
I followed this Post from EXPERT: "Connecting two routers wired - the definitive answer"
[url]...
I got the two routers working but the second one (not using it as a router) is not allowing me to change security mode from "disable" to WEP or anything else.The following Post didn't answered this issue: "Can't change wireless Security Mode on my WRT54G V5"
Linksys Wireless Router :: Wrt54gl / How To Change Security On System
Dec 25, 2011I need to change how my security is set on my wrt54gl... it has been so long I don't know the name or password I put it under.
View 1 Replies View RelatedLinksys Wireless Router :: WRT54G Security Mode Change
Jul 22, 2012My WRT54G Router has been reset after severe weather conditions, the wireless in now unsecure. I am trying to change it back to secure mode under wireless / security wireless, but it does not allow me to do so. The security mode remains disabled and does not change to WEP or WPA.
View 2 Replies View RelatedWireless :: How To Change Connection Settings
Feb 10, 2011I am trying to set up a internet connection to my campus network. i followed there instructions to the T. The network requires me to change my proxy settings. But every time i change my proxy to connect to the to the network, it say that i am connected but i can seem to load any pages. it worked before but i just redid my computer an it doesn't work now. one of the steps in the list of instructions given to me by the university was to select "dial whenever a network connection is not available" but selecting this is restricted for sum reason what do i do ?
View 1 Replies View RelatedChange Cisco Wireless From A Dynamic To Static Settings?
Jun 28, 2012How do I change my cisco wireless from a dynamic setting to a static settings.
View 1 Replies View RelatedCisco Wireless :: WRV200 Change Configuration Settings
Jul 18, 2011I have had a WRV200 wireless router running at the family office now for a several years now and recently I was made aware of an issue with the router. Previously it's function was to provide internet access for the laptops at the office and two workstations. It was a simple set up really, 1 SSID was for the work computers that were allowed on the internet and another SSID for personal and quest wireless devices and I made sure they were in seperate VLANs. This issue came into light after our office moved and with some new upgrades in networking equipment it was deemed safe enough to have the other computers on my wireless router.
What is happening is that all the computers will have a momentary drop of connectivity and will re-establish it's connection to the wireless router. I check the event viewer and it's the same thing accross the board. I'll have several DHCP warings specifically event ID 1003 and finally DHCP error 1000 almost 30 minutes after the first warning. From the looks of it there is something going on with the DHCP addresses about to expire and the systems are having issues trying to get it renewed. The error will happen then the computer will restore the connection.
I have it isolated to the WRV200 because of two reasons. Every machine is having this issue, it's not a random occurance on one computer. The big clue was when I checked Event viewer on my Marketing Director's laptop. These same errors were present all the way back to May which was before the office move and the router was provide access for our laptops to get online. There was no other networking equipment connected to it except for the Clearwire modem.
Between May and now the router has been reconfigured from scratch. New SSIDs, redid the internal IP addressing network wide to incorporate the new computers and would be easier to manage them that way. All wired devices go through a 16 port switch and then through port 1 on the router. Port 1 is on VLAN 1 and the others on VLAN 5. The 3 SSIDS are each on their own seperate VLANs. All systems are on DHCP and the important computers and the printers I am using Static DHCP. In the mean time I set all the important machines to use an alternate IP addressing scheme so hopefully there is no drop in conenctivity. While the drop is minor it could cause issues in the program called SLS (especially during printing) so I can not have this issue to continue. Configuration wise everything is defualt, is there something to change in the configuration settings that I may have missed twice now or the router simply near the end of it's life cycle.
Cisco :: 3550 Vlan Settings With Dlink 3200AP?
Dec 5, 2012I currently own 3 Dlink DWL-3200AP that are setup on MultiSSiD with Vlans 1 and 2. I just picked up 3 Cisco 3550 layer 3 switches. I also own a Cisco ASA 5505 (acting as a router) which is connected to the internet. The 3 switches are connected using the GiBi connectors to each other. They are across the campus from each other, one switch is in the room of the router. Each switch has 1 of the Access points on them.
What I am trying to do is setup the switches to take SSiD 1(Vlan1) to have access for the entire network and have SSiD 2(Vlan2) just hit the router for internet.
I have all static IP's setup on the SSiD 1(Vlan1) connections, and I want to have a DCHP server for the SSid 2(Vlan2).I setup in the Cisco Network Assistant, for the 3550's to have VLAN 1 be port 48 and VLan 2 be port 47 going to the router.
What is currently happening is that if I connect to the SSiD1(Vlan1) I can access all of the switches and the router no problem. When I connect to SSiD2(Vlan2) I cannot connect to anything, ping or otherwise. I figure it might be something in the Access Point but at this point I am hitting my head on a wall trying to figure out what is going on.
Wifi Security Settings - Need Password For Netgear Router
Jan 1, 2012need passwords for netgear 1 wifi . free
View 2 Replies View RelatedFinding Network Security Key From Wireless Settings?
Mar 12, 2011where do i find my security key for my wireless setup
View 2 Replies View RelatedSecurity / Firewalls :: Can't Change Password On Linksys Router
Jun 22, 2011I've been trying to remove an invading computer from my network. My ISP told me to change the password on my router. I followed all instructions, but it returned to the original setting each time. I've been unplugging modem and router, whenever I am not online, but when I am online and the invader is also, everything is very slow. At one point I was not even able to get online, as I got the error message that another computer was using my IP address.
View 9 Replies View RelatedHow To Change Wireless Security Key
May 24, 2012How to change the wireless security key?
View 1 Replies View Related