Linksys Wireless Router :: Unable To Change E1000 Security
Aug 21, 2011
I have a Linksys E1000 wireless-n router. I bought the router originally so I could get my Nintendo DS on Wi-Fi. I then realized that DS games require a WEP Key, but my E1000 defaults to WPA/WPA2 mixed mode. My laptop and my Wii connect online with the default settings just fine. My 3DS also seems to be able to connect with the internet router, but not Wi-Fi, for some reason. So when I'm on Cisco connect, I go to Router settings, it brings my web browser to "http://192.168.0.1". From there I go to the Wireless tab, and then click on Wireless Security. I've tried multiple times to change the Security Mode to WEP, and even disabled security. But after I save the settings, the connection on my laptop is lost, and I have to reboot my router all over again, and am back with the default WPA/WPA2.
This is for a E1000 model router.I recently downloaded Cisco Connect. It wants my router name and password. I don't know the password. How can I find the password or change it? The password might still be the default, but "admin" does not work.
I have a problem viewing my security cam on my android IP cam app.I forwarded port on my router to my security cam then fixed security cam to have a static IP but my computer being on DHCP, after reboot changed IP, so I lost connection to android IP cam app.I read on a forum,that If your camera is using DHCP,setup your router so that it always gives the same static IP address for the camera based on it's MAC address but where do you set this up a Linksys E1000 router & on Samsung Y? so I can view my security cam on my android IP cam app.?
When I connect my modem directly to my computer (modem > computer) it works just fine, internet connects and everything through the direct ethernet connection.But when I connect the modem to the router and then try to connect wireless with any other computer (modem > router > wireless) nothing works. Not even when I have it connected directly from the router to the ethernet on the main computer. (Which has ALWAYS worked until now.
My e1000 was working fine until it was accidentally unplugged. Now it doesn't work. I downloaded the set up program from the site and tried to run it, but it does not recognize an internet connection when I have the modem connected to the router and the router connected to the PC. The internet works when I connect the modem directly to the PC. I have unplugged everything and restarted the PC several times and tried running the software again, but no dice.
I currently have an E1000 router set up on a 2006 Dell PC as main hub of a network that includes kids' 2003 Dell PC (with a Cisco Connect USB receiver plugged in because it has no wireless capabilities) and wife's Dell laptop. We're about to change main desktop computer to an iMac (2011 refurb, won't be running Lion which I know there's issues with as far as Cisco Connect), give the 2006 Dell to kids and get rid of the old 2003 box. I cannot locate my installation CD, I'm sure it's somewhere in our rather cluttered computer area, although I understand I can download what I need. This probably is a dufus question, and I apologize in advance, it's just not clicking in my mind, but basically am I going to have to go back to step one, just like the first day I set up the router, as far as setting up our network?
I've got a v1 E1000. Lately when I turn on one of my computers, or attempt to connect with my Motorola Xoom tablet it will show connected but I will not have internet access. Initially it will show that I have internet access but not work, then after about 1-2 minutes my PCs will show "No Internet access" for about 2-3 minutes, then it will show "Internet Acess" again and still not load. After that, in about 1-3 minutes the internet will start working and work as good as ever until I disconnect (manually or by turning off my computer) then connect again; the process described avove happens again.
I have a desktop (winXP) and a laptop (Win Vista) connected to a E1000 router. When they are both connected to the E1000 via cat 5 cable I can share files and directorys with no problems. When I connect the laptop via WiFi I am unable to share files. In fact I cannot ping the laptop from the desktop or the desktop from the laptop. It is like the AP Isolation is on but I have checked that setting and it is off.
I am trying to connect to my wifi with my wireless router it is a cisco linksys e1000 and and I tried connect and it said error so I went to manual set up.and couldn't figure out the codes to enter I couldn't find the cisco codss on the nintendo website.
This problem just started. I am unable to load certain https sites (for work). If i directly connect to ethernet, it works, so my isp isnt my problem. When i try to connect to the sites, it says "sending request" then times out. I have played around with the settings non stop and nothing has worked. I have a mac running 10.7.5.
I have a blog and website hosted by X9 Hosting. I am unable to connect to cPanel, the website, the blog, or and X9 sites.This began when saving a WordPress article in the blog. The save hung and then all connectivity through the router was lost.When using the modem (wired) I can visit the above sites. what do I need to do to gain wireless connectivity back?
I have a WRT160N that I've been using with my HDTV for months. Now I want to connect a BluRay player to it, but the setup requires me to enter a security code, and the one I had for the router doesn't work. Can I change the number, or at least double-check the number I do have?
I'm trying to change the wireless security mode on my folks' WRT54G to see if I can get the wireless adapter on their new TIVO to talk to the router. It looks like TIVO only does WEP, not WPA. I get into the wireless page of the router and when I try selecting anything but "WPA Personal", the selected choice flips back to "WPA Personal" in less than a second. I've updated the firmware but no change.
Trying to secure Linksys WRT54G V8 wireless router. Can't change security mode from 'Disabled'!?
I followed this Post from EXPERT: "Connecting two routers wired - the definitive answer"
[url]...
I got the two routers working but the second one (not using it as a router) is not allowing me to change security mode from "disable" to WEP or anything else.The following Post didn't answered this issue: "Can't change wireless Security Mode on my WRT54G V5"
My WRT54G Router has been reset after severe weather conditions, the wireless in now unsecure. I am trying to change it back to secure mode under wireless / security wireless, but it does not allow me to do so. The security mode remains disabled and does not change to WEP or WPA.
I have a EA4500 that I get error 2315 when I try to Delete,change name,or icon. I did a 30/30/30 and everything worked great,24 hours later I was back to error 2315. I tried re-flashing the firmware, but that didn't work. I get the same problems when I try using the Smart Wifi app. There are also times when I can not access the router using Smart Wifi unless I reboot the router when I get home.
I have a passphrase for my router that I need changed but I don't know how. I was told that if anyone knows my phrase word that they can access my router.
I HAVE A CISCO E1000 WIRELESS ROUTER. I KEEP GETTING "NEED WIRELESS SECURITY SETTINGS FOR MY ROUTER NAME. CONNECTING FROM HP-XP INTERNET TO MY LAPTOP HP-VISTA. I HAVE ENTERED: SECURITY TYPE: WPA2-PERSONAL ENCRYPTION TYPE: TKIP NETWORK SECURITY KEY: ??????? THIS IS WHERE I AM STUMPED AT NETWORK SECURITY KEY. I TRIED WHAT I THOUGHT IT WAS FOR MY LAPTOP HP VISTA, BUT IT'S NOT EXCEPTING. I'VE BEEN AT THIS FOR 2-WEEKS TRYING TO FIGURE OUT HOW TO GET MY VISTA TO WORK WITH MY XP. WHERE DO I GO TO GET A NETWORK SECURITY KEY???
I've been trying to remove an invading computer from my network. My ISP told me to change the password on my router. I followed all instructions, but it returned to the original setting each time. I've been unplugging modem and router, whenever I am not online, but when I am online and the invader is also, everything is very slow. At one point I was not even able to get online, as I got the error message that another computer was using my IP address.
I have a new WAP54G Access point in our network. I would like to change WPA security settings, but am not able to do it.I have done everything as installation leaflet says, and I get to the 5th point Status sheet: Firmware version v.304, MAC address (numbers), IP address 192.168.1.245, SSID linksys, Channel channel 6 and WEB security Disable
What I would like to do, is change SSID and have WPA2 security. When I am clicking "Yes", it goes to the next sheet "Password", I write admin and click "Enter". I will have Pop-up window "Setup Access violation at address 0049BDB6 in module 'Setup.exe'. Write of address C933016A."
I own a E1000 router that I use with several wireless machines. Unfortunately, I cannot connect to the configuration of the router by typing url...in a browser, be it wireless or weirdly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router". I tried to switch my router off and on, but that doesn't work. Totally resetting the router solves the problem, but not definitely.Is there a solution that does not require resetting my router?
My guest can't use my wireless network and I can not add more devices like a ipad2. Got a new ipad2 for my son for Christmas been trying to set it up for Christmas, so on Christmas day I am not trying to do the set up. My problem is I can not get it to log on to the network. I have been putting in the same pass word all my other computers in the house use but it will not work...
My wireless router (E1000) was accidentally unplugged. Since then the wireless LED light doesnt come on and the router cannot be detected. All the other lights are on. I tried to reset it but I dont think it worked, since the power LED didnt blink as its supposed to do after holding reset for 10-15 seconds (or more!!).
I've been using the E1000 for months. I have 2 iphones, an ipod, a windows 7 netbook and a macbook connected wirelessly to it. It's been set at wpa2/wpa mixed mode all this time without a problem. Out of the blue: no wireless connection on any device. I restarted the modem, router, PC's, phones, etc. I've updated the firmware. The only way I can get a wireless connection is to use wep. How can I get the better security and speed of wpa2 back?
