I have a desktop (winXP) and a laptop (Win Vista) connected to a E1000 router. When they are both connected to the E1000 via cat 5 cable I can share files and directorys with no problems. When I connect the laptop via WiFi I am unable to share files. In fact I cannot ping the laptop from the desktop or the desktop from the laptop. It is like the AP Isolation is on but I have checked that setting and it is off.
View 3 RepliesI replaced a WRT54G with an E2500. The wired PC is running XP SP3, the wireless PCs are (1) Win 7 and (1) XP SP3. Print sharing works fine, but all file shares on the "host" PC are failing. I ran "net share" and turned off all shared directories on the "host" and the same on the wireless PCs, then rebooted all. The Win7 PC sees the single directory I set up to share, but when I try to open it, I get a message that the directory is inaccessible (possibly because of permissions) and that "There is not enough server storage available to process the command".Wireless XP PC gives the same error, but can access the printer, and sees the directory share on the "host".
View 2 Replies View RelatedI have one desktop (win7) and one notebook (win xp).The XP is in the living room connected to the router using a ethernet cable.The win7 is in the bedroom connected the the router using wireless connection.The router I am using is Cisco Linksys E1200.I guess using calbe or wireless does not matter because they are all connected to the router anyway. So how do sharing files between these two PCs?P.S. both computers are set to WORKGROUP already, but neither one is visible to the other in Network.
View 3 Replies View RelatedI have two mac laptops and am trying to copy a directory with a number of PDFs in it. The files aren't particularly large, but there are many of them. At some point in the process the router stops and must be turned off and on before it will respond again either wirelessly or wired. I have tried the same experiment with both devices wired and the router works fine. I have tried changing the MTU, channel, beacon setting, etc. as other forum posts have tried. I tried reflashing the firmware, resetting to factory defaults and reconfiguring. So far no success. Cisco support wants me to return the router. Frankly I'm at the point of considering the former Linksys/Cisco products complete rubbish. I am going to have to buy a new router even if I return this one since I can't be without a router for any length of time.
View 8 Replies View RelatedWe just got a Linksys e2500 router for Christmas. We have a desktop computer running Windows XP using a cable connection to the router and a laptop running Windows 7 using a wireless connection. Both connect to the internet fine, but we can't get them to connect to each other for file sharing. I have them both set to the same work group name, but they don't appear on each others' lists of network connections. They can ping each other OK, but when trying to access shared files, the laptop only shows the laptop and the router, and the desktop only shows the desktop and the router. I tried the Cisco Connect Easy Setup wizard, using a USB key to share settings between the 2 computers with no luck.
I realize that you can't use the Windows 7 "home group" feature when connecting to an XP machine, but shouldn't there be some way to do it? Or is this caused by the fact that one connection is wired and the other is wireless? Do they both need to be the same for this to work, or is there a way to connect the wired and wireless networks together?
I have a small home network set up: desktop, wireless router, printer, netbook, two set-top boxes, visiting(!) laptops. Until recently, it worked fine, then two things happened.
1 - everything on the Internet went VERY slow and call to my ISP resulted in a new router.
2 - I also subscribed to McAfee Home Protect through my ISP rather than ther free AVG.
Since then, I have been unable to share the files on my desktop with my netbook; it can not see them on My Network Places.
Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on both systems but they cannot see each other in network places. I am unable to share files between the them. I have tried all the procedures mentioned in many forums but still not able to find a solution. I use Kaspersky Internet security and made chages to my firewall as per the instructions from their support forum.
View 3 Replies View RelatedNew, out of the box, 03 June 2011, Dell Desktop, W7 Home Premium SP1.
[code]....
So here is the issue:
When I connect my modem directly to my computer (modem > computer) it works just fine, internet connects and everything through the direct ethernet connection.But when I connect the modem to the router and then try to connect wireless with any other computer (modem > router > wireless) nothing works. Not even when I have it connected directly from the router to the ethernet on the main computer. (Which has ALWAYS worked until now.
My e1000 was working fine until it was accidentally unplugged. Now it doesn't work. I downloaded the set up program from the site and tried to run it, but it does not recognize an internet connection when I have the modem connected to the router and the router connected to the PC. The internet works when I connect the modem directly to the PC. I have unplugged everything and restarted the PC several times and tried running the software again, but no dice.
View 4 Replies View RelatedI currently have an E1000 router set up on a 2006 Dell PC as main hub of a network that includes kids' 2003 Dell PC (with a Cisco Connect USB receiver plugged in because it has no wireless capabilities) and wife's Dell laptop. We're about to change main desktop computer to an iMac (2011 refurb, won't be running Lion which I know there's issues with as far as Cisco Connect), give the 2006 Dell to kids and get rid of the old 2003 box. I cannot locate my installation CD, I'm sure it's somewhere in our rather cluttered computer area, although I understand I can download what I need. This probably is a dufus question, and I apologize in advance, it's just not clicking in my mind, but basically am I going to have to go back to step one, just like the first day I set up the router, as far as setting up our network?
View 3 Replies View RelatedI have a Linksys E1000 wireless-n router. I bought the router originally so I could get my Nintendo DS on Wi-Fi. I then realized that DS games require a WEP Key, but my E1000 defaults to WPA/WPA2 mixed mode. My laptop and my Wii connect online with the default settings just fine. My 3DS also seems to be able to connect with the internet router, but not Wi-Fi, for some reason. So when I'm on Cisco connect, I go to Router settings, it brings my web browser to "http://192.168.0.1". From there I go to the Wireless tab, and then click on Wireless Security. I've tried multiple times to change the Security Mode to WEP, and even disabled security. But after I save the settings, the connection on my laptop is lost, and I have to reboot my router all over again, and am back with the default WPA/WPA2.
View 1 Replies View RelatedI've got a v1 E1000. Lately when I turn on one of my computers, or attempt to connect with my Motorola Xoom tablet it will show connected but I will not have internet access. Initially it will show that I have internet access but not work, then after about 1-2 minutes my PCs will show "No Internet access" for about 2-3 minutes, then it will show "Internet Acess" again and still not load. After that, in about 1-3 minutes the internet will start working and work as good as ever until I disconnect (manually or by turning off my computer) then connect again; the process described avove happens again.
View 2 Replies View RelatedI am trying to connect to my wifi with my wireless router it is a cisco linksys e1000 and and I tried connect and it said error so I went to manual set up.and couldn't figure out the codes to enter I couldn't find the cisco codss on the nintendo website.
View 1 Replies View RelatedThis problem just started. I am unable to load certain https sites (for work). If i directly connect to ethernet, it works, so my isp isnt my problem. When i try to connect to the sites, it says "sending request" then times out. I have played around with the settings non stop and nothing has worked. I have a mac running 10.7.5.
View 3 Replies View RelatedI want to share files between two computers in my household. One has Windows XP professional and the other has Windows Vista Home Premium. I have a D-Link DIR-300 wireless router, and I set up static IP's for each PC.
View 3 Replies View RelatedI have a blog and website hosted by X9 Hosting. I am unable to connect to cPanel, the website, the blog, or and X9 sites.This began when saving a WordPress article in the blog. The save hung and then all connectivity through the router was lost.When using the modem (wired) I can visit the above sites. what do I need to do to gain wireless connectivity back?
View 7 Replies View RelatedI am unable to get this to hook up my vizio dvd player to wifi
View 2 Replies View RelatedI recently got a ea4500, wireless working fine, can connect to the usb storage from different devices fine, but when i try and copy a file to the usb storage, it initially looks like its transferring and registers a file in the usb storage folder. but when i access the usb storage from other devices i cannot find or access the files that i transferred?
View 5 Replies View RelatedI bought a seagate USB hard drive today from Target. Its a 2TB and I was going to use it via USB attached to my router. I connected it and the Linksys firmware detected it and I was able to create the appropriate folders on the drive for storage through the linksys GUI.My issue is that I am now trying to move my movies and tv shows over to the drive and it isn't allowing me to do that.
I get an error message that says "You don't have access to //myshare. contact your administrator".
I'm not sure why I was able to create folders on this drive but am unable to move files to it. Makes no sense to me. Write permission is write permission no?My machine which currently stores the media files is windows7 utimate. The router is E3000 using up to date stock firmware.
I have a cisco E1000 router and I am unable to upload files, everything else seems to be working fine
View 2 Replies View Relatedi have 2 desktop and 1 laptop and i want to share files each other without using switch hub or router.
my server core2 dou and have built in lan card and 1 NIC
my client desktop pentium 4 and have built in lan card
my client desktop intel celeron and built in lan card
i crimped 2 crossover utp cable, check my color coding:
A Stripe white orange
Orange
Stripe green white
Blue
Stripe blue white
[code]....
i want to know how we can share files or wireless to connect internet via wi-fi by using network and sharing in windows 7 between two laptops which are windows 7?
View 1 Replies View RelatedHow to share files in wireless network
View 3 Replies View RelatedI'm Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on bothsystems but they cannot see each other in network places. I am unable to sharefiles between the them. I have tried all the procedures mentioned in many forumsbut still not able to find a solution
View 4 Replies View RelatedRegion : United States
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I just got the TL-WDR3600.
It seems to work fine and my Smart TV recognizes my network drive or usb hdd connected to the router.
However, the files on the network drive or usb hdd don't seem to appear/work. The folder the files are stored in are recognized, but not the files themselves.
I've plugged the usb HDD directly to the TV and it recognizes and plays the movie files fine, however when trying to find them via the wireless router, they don't appear/work.
Are there some settings i need to change to allow the TV to see/play the files?
I have my Win 7 pc networked to my host XP desktop. They see each other. I set them to share. Now when i pick a certain file, in this case on my XP host, I right click it and choose Share and security box. Looking at my Win 7 pc, i do not see it.
View 5 Replies View Relatedhow to share files with two different networks, one networking is in ptcl dsl router, second is in tenda wifi router, so how to enable sharing files with these two networking
View 1 Replies View RelatedI know this is sort of a stupid question, but I just spent over an hour with a Microsoft Tech Support guy who had absolutely no clue what he was doing. He frequently paused for five minute intervals to "confer with his resources" (I suspect he was reading an outline that told him what to do), and every time I explained that an issue did not work precisely as he expected, he had to put me on hold and talk to someone else. It was hellishly aggravating
View 1 Replies View RelatedI have 3 computers in my home network: the main computer, a laptop, and an old computer used for streaming vids and pix to the TV. I recently upgrading the main computer from XP to Win7, as well as upgraded the TV computer from Win98 to XP. The laptop and main computer are fine. The problem arises when I try to access files from either the laptop or main computer from the TV computer.I've also read something about that the user name and password has to be the same on all the computers on the network, but that doesn't really make sense. The laptop and main computer don't have the same user name and they work fine. Besides, before I disabled password file sharing, I entered the proper name and password for the main computer and it still wouldn't let me connect.
View 14 Replies View Relatedi cant share any of my files on my windows 7 pc to my windows xp pc..it ask for a username & password & a permission on windows 7. and one more thing can i use both ddr2 800 & ddr2 667 memory at the same time as long as motherboard supports it?
View 3 Replies View RelatedI want to set up my desk top and laptop so that I can share all the files on desk top or laptop.
View 1 Replies View Relatedi have two laptops running windows 7 i need to share some files through the network , but after i connected the two laptops by an internet cable , it says that " local are connection " network cable unplugged
View 14 Replies View Related