Linksys Wireless Router :: E1000 Router Crashes When Copying Files Wirelessly
Dec 28, 2012
I have two mac laptops and am trying to copy a directory with a number of PDFs in it. The files aren't particularly large, but there are many of them. At some point in the process the router stops and must be turned off and on before it will respond again either wirelessly or wired. I have tried the same experiment with both devices wired and the router works fine. I have tried changing the MTU, channel, beacon setting, etc. as other forum posts have tried. I tried reflashing the firmware, resetting to factory defaults and reconfiguring. So far no success. Cisco support wants me to return the router. Frankly I'm at the point of considering the former Linksys/Cisco products complete rubbish. I am going to have to buy a new router even if I return this one since I can't be without a router for any length of time.
View 8 Replies
ADVERTISEMENT
Oct 27, 2011
I have an E1000 that is connected to my main computer via Ethernet and have found that it crashes almost every time I run a particular type of operation.I'm testing software and running PHP scripts that invoke cUrl to fetch data from a few different web services via SSL. I would say that at least every other time one of these operations begins, the router crashes -- I am unable to ping its internal IP and I have to power-cycle it to get back up and running.
I don't experience the crashes in any other context and I use the router all day long. I'm one release behind on firmware but the release notes on the most recent version don't suggest that upgrading would make any difference -- no mention of any bugs fixed, for example.
View 3 Replies
View Related
Dec 3, 2011
I currently have an E1000 connected to my cable modem in my living room. It provides wireless access to my whole household.
I have a set of computers I want to have set up as a lab on their own router and have a WRT54GS available for me to modify.
The WRT is in the dining room (office) and the cable modem/E1000 are about 45 feet away.
I want to set up the wireless environment on the E1000 as 192.168.1.1-24 and the wired network as 192.168.2.1-24 with the wired network being able to wirelessly connect to the wired so all the machines in the house can see my server and other machines.
View 2 Replies
View Related
Aug 23, 2011
I have a desktop (winXP) and a laptop (Win Vista) connected to a E1000 router. When they are both connected to the E1000 via cat 5 cable I can share files and directorys with no problems. When I connect the laptop via WiFi I am unable to share files. In fact I cannot ping the laptop from the desktop or the desktop from the laptop. It is like the AP Isolation is on but I have checked that setting and it is off.
View 3 Replies
View Related
Oct 1, 2010
I just bought a E1000 and connected it to my cable modem. I can connect to the internet with my wired PC and wired Xbox 360 with no problems. For some reason on my wireless laptop I can only connect to the internet by the Guest connection. When I connect to the regular router SSID I get local only access, no internet.
View 2 Replies
View Related
Jul 21, 2011
I have a cisco E1000 router and I am unable to upload files, everything else seems to be working fine
View 2 Replies
View Related
May 26, 2013
We are having issue with all our Cicso wireless devices (AIR-AP1142N-N-K9) when connected to Windows 8 Pro users. When copying large files, the connection changes to limited access. The initial connection to the access points is also slow for both windows 7 and windows 8 pcs.
View 3 Replies
View Related
Jan 23, 2012
I have wrt610n that i have wd 1 tb drive hooked to usb port and when i try to copy large folder/files to it, i get the dreaded- cancel, try again skip and it locks up solid. i have treied all settings in these and other forums. i have tried two different brand size hard drives, i have tried wireless and wired and nothing. is there a fix for this. i have latest firmware on everything, i have everything set tweaked best as they can and not one things makes a differance. all i get from linksys is try this try that. is there a way to copy large files to hd first via the pc then hook back to the router to see the files?
View 1 Replies
View Related
Jan 14, 2012
My parents bought a new computer today. My mom called me up today and asked me if I could transfer some stuff from the old computer to the new computer. I do not have a flash drive or an external hard drive, or jump drive.etc. So I was hoping I could just connect the two computers with an ethernet cable, and create a network.
Is this possible, or do you need additional equipment. I do not have a router, so if I create a network it has to be done with wires. So is it possible to create a network with nothing but an ethernet cable? Or is there another way I can get my moms i tunes transferred over?
View 10 Replies
View Related
Apr 29, 2012
I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files
View 9 Replies
View Related
Apr 29, 2012
I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files.
View 2 Replies
View Related
Apr 22, 2011
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared. If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine. I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
View 1 Replies
View Related
Apr 21, 2012
I am working on a small business network. 8-10 computers, usually only 3-4 being used at any one time. I'm trying to improve network file transfer speeds between the local machines and a network READYNAS NV+. There are both 32 and 64 bit OS's in play. Between the READYNAS and the local machines are two non-managed switches (jumbo frames capable) and a patch panel. The cable from the READYNAS goes into the first switch, then out of that into the patch panel then into the second switch, and then out to several local machines.
Though i would love to improve performance to all the local machines, I am primarily concerned with one in particular. It has Windows 7 64 bit and an onboard Broadcom Netlink Gigabit network adapter. This device does NOT have a Jumbo frames option in the advanced settings. Here's the issue: When copying files from the READYNAS the upload speed is only 16mbps (jumbo frames enabled on the READYNAS) if I turn jumbo frames off on the READYNAS the upload speed drops to 9mbps. Just FYI, this is a photography studio and the files are always LARGE.
I have several questions that hopefully will lead to an illuminating discussion. 1) Is it possible that the universal patch is in any way a problem? Sorry if that is totally stupid, but I've never encountered one before. I understand routers and switches, but this patch thing is new to my experience. 2) Is having two switches a bottleneck? 3) Is it possible that the onboard Broadcom network adapter is junk? Why doesn't it have jumbo frames options? 4) Could I get better performance from an add on network card in a PCI-E slot and a couple of managed switches?I realize I'm all over the map here. Bottom line, I've got a small network situation here. Very simple, uncomplicated layout. All I want is better read/write performance to a single READYNAS NV+ to a handful of local machines. If I need to settle, I can live with better performance to the one single machine. 16mbps just seems tragically slow.
View 11 Replies
View Related
Jun 30, 2012
I have a HTPC running XP and a Media Player connected on the same wired network. I also have a Win7 laptop connected to the same network over Wifi.
From the laptop I want to send files between the HTPC and Media player on the wired network however if I drag and drop or use the "send to" option they are sent via the wirelss laptop which is very slow.
Am I missing a trick how can I send files directly between the 2 devices?
View 2 Replies
View Related
Nov 18, 2012
I was using my laptop - working in MS Word and hadn't even opend a internet browser and suddently a command prompt appears and all i managed to see before closing it from the task manager (which had it running through internet explorer i think) was that it was copying files.Its a work laptop so i would like to know if it was remote access from IT which seems doubtful on a Sunday or if i need to be concerned about security. Is there a relatively easy (considering i have zero programming experience) way for me to check if anyone logged on with remote access and who and what files were copied?
View 2 Replies
View Related
Sep 5, 2011
In hopes of fixing some "flaky" connection issues with my WRT54G V2 Wireless Router, I downloaded and applied the new firmware version released on 08/18/2011, Ver.4.21.4 for my Version 2 Router. I downloaded, went through the application process using the router's firmware update process, it said it was successful and then the router restarted and didn't work. Couldn't ping the address, constant flashing Power light, no response at all from router. Tried again, same result. Performed hard reset, same result. Tried a few other recovery techniques found on the web with no success. Finally I did the process found here [URL] This reset the router and I re-uploaded this same 2011 version. Router still broken. I ran through the process again after downloading an older version of the firmware, specifically version V3.1_4.00.7, the upload ran, and the router worked again! This was proof to me that the newest version completely BRICKED my router. I'm so relieved I was able to reset the router and manually recover, but most will never try this. I recommend Cisco retest this ASAP and pull the new release for the V2 router until they get this resolved!
View 9 Replies
View Related
Apr 29, 2012
I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files.
View 1 Replies
View Related
Sep 9, 2012
I am having difficulties saving, loading conifg files from a USB, what is the correct command for loading a config file from USB for cisco 3750x switch.
View 1 Replies
View Related
Aug 29, 2006
I am attempting to setup a wireless access pointand want to deny access to a group of IP addresses. When I go to Wireless, MAC setup, Deny or Allow, and select "Edit MAC Address List" my browser crashes. I have tried this on two different Linux systems and three browsers, Firefox, Mozilla, and Seamonkey.Tech Support tells me to downgrade to Firmware version 4.30.2, the only compiled version available on the Linksys website, but with no way to go back to 4.30.5 if the problem isn't fixed or if worse problems come up I am reluctant to try this fix, The only other suggestion Tech Support offered was to replace my WRT54GL with a WRT54G.
View 3 Replies
View Related
Feb 8, 2012
DSL Modem>E4200>100' Cat6>SE2500>6' Cat6>Dell XPS 420 Windows 7 In this setup windows 7 crashes everytime about 2 mins If I go Cat6 to computer there is no issue at all The first 6' cable I used would only give a 10Mb connection The second 6' give 1Gb but still crashes everytime The E4200 has only to ports used one for the SE2500 and one for a Cisco SD2005 The SD2005 is connected to a Revue, Squeezebox, Sony BDP, and a Dish Network 722 I am also using WET610N to a trendnet 4port switch with a Dish 922 and a Sony BDP which I am tring to eliminate the WET610N by hard wiring everything. This is the purpose of the new ES2500.
View 1 Replies
View Related
Sep 8, 2011
When I use ASDM or the CLI to copy (ftp) files from my management station to flash on my ASA5520. I get to 99% and then the gui or cli window hangs.
The ASA itself completely freezes i.e. no traffic in or out until I kill the transfer window and then it may reboot
[and yes, there is more than enough free space on the flash file system for the files]
ASA5520 V8.2(3) / ASDM V6.4(5)
View 1 Replies
View Related
Oct 19, 2011
DSL Modem>E4200>100' Cat6>SE2500>6' Cat6>Dell XPS 420 Windows 7 In this setup windows 7 crashes everytime about 2 mins If I go Cat6 to computer there is no issue at all The first 6' cable I used would only give a 10Mb connection The second 6' give 1Gb but still crashes everytime
The E4200 has only to ports used one for the SE2500 and one for a Cisco SD2005 The SD2005 is connected to a Revue, Squeezebox, Sony BDP, and a Dish Network 722 I am also using WET610N to a trendnet 4port switch with a Dish 922 and a Sony BDP which I am tring to eliminate the WET610N by hard wiring everything. This is the purpose of the new ES2500.
View 3 Replies
View Related
Nov 6, 2011
For a while now, my wireless network at home has been very unreliable. I posted on these forums before, asking for assistance to fix crashes that seemed to be random. I was largely unsuccessful, and the problem continued. However, as I continued to experiment with different methods to keep my network up and running, I noticed that as long as I had at least one device connected to the network around-the-clock it never crashed. This was easy enough, as I own an iPod touch and a dock (I would leave it sitting it the dock unlocked all the time). But it's annoying to never be able to leave the house with it, and I'm ready to finally get a solution to the problem once and for all. I would prefer not getting a new router, but if worse comes to worse I will.
To sum it up:
-Works perfectly (when up) at full speed, never crashes unless there are no devices connected to it.
-When it does crash, it is very difficult to 'coax' it back into working again; it's been down for weeks at a time before.
-For some strange reason (and maybe this is a clue), newer game systems such as a Nintendo DSi or PS3 can make it start working again. I, of course, own neither of these.
-I'm using a WRT160N V3, latest firmware as far as i know.
View 9 Replies
View Related
Mar 5, 2013
The router had firmware 2.0.x(?) and I tried to update to the latest FW, according to the webpage that's
FW_E1000_2.1.02.006_US_20130115.bin
Hardware is E1000 v2 according to sticker on back.The firmware update failed (no reason given) and the router now hangs in limbo where all it does is flashing the power LED.I set my PC to 19?2.168.1.2 and TFTP'd the firmware over to 192.168.1.1 - no errors reported and 192.168.1.1 is pingable. Held reset for 30s, then powered down the router for another 30s. On power-up the router still flashes the power LED.
View 3 Replies
View Related
Jun 26, 2012
I installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
View 4 Replies
View Related
Jun 20, 2010
I just got E1000 cisco wireless router. Started setup, everything worked fine and replaced admin password with my own. For some reason got error message. tried to redo setup and got message router not recognized. used laptop and found out that wireless works fine. After few days noticed that there is a (mynetworkname) guest connection you can connect without any password. i don't need that stupid thing and my question is how to disable guest network? I cannot reach Main Menu from cd and have no idea where to look for it when i connect to router by web.
View 9 Replies
View Related
Apr 25, 2011
Does the E1000 router come with a default security setting upon installation using the supplied CD?
View 9 Replies
View Related
Nov 10, 2011
I have an E1000 router and recently moved to a basement apartment where the only internet access comes from a single Ethernet cable running out of a router upstairs. I can connect to that network (it is family) but ideally I would like to connect my router and create a second network so that I can connect my printer and other devices independently of the upstairs network.
View 2 Replies
View Related
Aug 9, 2012
We have a home use WRT160N router linked to a PC desktop and two wireless laptops, Yesterday bought a new I-Phone, but could not link to my network (entered the security key many times). I accidentally connected to computer fix it firm that linked to my PC and wanted a large sum to fix the problem which he said was due to large number of temp?? internet files and once removed he would change the IP address of the desktop computer? Is this diagnosis logical and can I do it on my own. The router is definetely working - both laptops access the internet and I was recently able to hook up a Samsung Blu-Ray player using the same security code I used for the I-Phone.
View 1 Replies
View Related
Jan 16, 2012
We just got a Linksys e2500 router for Christmas. We have a desktop computer running Windows XP using a cable connection to the router and a laptop running Windows 7 using a wireless connection. Both connect to the internet fine, but we can't get them to connect to each other for file sharing. I have them both set to the same work group name, but they don't appear on each others' lists of network connections. They can ping each other OK, but when trying to access shared files, the laptop only shows the laptop and the router, and the desktop only shows the desktop and the router. I tried the Cisco Connect Easy Setup wizard, using a USB key to share settings between the 2 computers with no luck.
I realize that you can't use the Windows 7 "home group" feature when connecting to an XP machine, but shouldn't there be some way to do it? Or is this caused by the fact that one connection is wired and the other is wireless? Do they both need to be the same for this to work, or is there a way to connect the wired and wireless networks together?
View 7 Replies
View Related
Mar 26, 2012
I own a E1000 router that I use with several wireless machines. Unfortunately, I cannot connect to the configuration of the router by typing url...in a browser, be it wireless or weirdly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router". I tried to switch my router off and on, but that doesn't work. Totally resetting the router solves the problem, but not definitely.Is there a solution that does not require resetting my router?
View 2 Replies
View Related
Dec 20, 2011
My guest can't use my wireless network and I can not add more devices like a ipad2. Got a new ipad2 for my son for Christmas been trying to set it up for Christmas, so on Christmas day I am not trying to do the set up. My problem is I can not get it to log on to the network. I have been putting in the same pass word all my other computers in the house use but it will not work...
View 2 Replies
View Related
Feb 10, 2013
My wireless router (E1000) was accidentally unplugged. Since then the wireless LED light doesnt come on and the router cannot be detected. All the other lights are on. I tried to reset it but I dont think it worked, since the power LED didnt blink as its supposed to do after holding reset for 10-15 seconds (or more!!).
View 5 Replies
View Related
