I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files
I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files.
I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files.
My parents bought a new computer today. My mom called me up today and asked me if I could transfer some stuff from the old computer to the new computer. I do not have a flash drive or an external hard drive, or jump drive.etc. So I was hoping I could just connect the two computers with an ethernet cable, and create a network.
Is this possible, or do you need additional equipment. I do not have a router, so if I create a network it has to be done with wires. So is it possible to create a network with nothing but an ethernet cable? Or is there another way I can get my moms i tunes transferred over?
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared. If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine. I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
I am working on a small business network. 8-10 computers, usually only 3-4 being used at any one time. I'm trying to improve network file transfer speeds between the local machines and a network READYNAS NV+. There are both 32 and 64 bit OS's in play. Between the READYNAS and the local machines are two non-managed switches (jumbo frames capable) and a patch panel. The cable from the READYNAS goes into the first switch, then out of that into the patch panel then into the second switch, and then out to several local machines.
Though i would love to improve performance to all the local machines, I am primarily concerned with one in particular. It has Windows 7 64 bit and an onboard Broadcom Netlink Gigabit network adapter. This device does NOT have a Jumbo frames option in the advanced settings. Here's the issue: When copying files from the READYNAS the upload speed is only 16mbps (jumbo frames enabled on the READYNAS) if I turn jumbo frames off on the READYNAS the upload speed drops to 9mbps. Just FYI, this is a photography studio and the files are always LARGE.
I have several questions that hopefully will lead to an illuminating discussion. 1) Is it possible that the universal patch is in any way a problem? Sorry if that is totally stupid, but I've never encountered one before. I understand routers and switches, but this patch thing is new to my experience. 2) Is having two switches a bottleneck? 3) Is it possible that the onboard Broadcom network adapter is junk? Why doesn't it have jumbo frames options? 4) Could I get better performance from an add on network card in a PCI-E slot and a couple of managed switches?I realize I'm all over the map here. Bottom line, I've got a small network situation here. Very simple, uncomplicated layout. All I want is better read/write performance to a single READYNAS NV+ to a handful of local machines. If I need to settle, I can live with better performance to the one single machine. 16mbps just seems tragically slow.
I have a HTPC running XP and a Media Player connected on the same wired network. I also have a Win7 laptop connected to the same network over Wifi.
From the laptop I want to send files between the HTPC and Media player on the wired network however if I drag and drop or use the "send to" option they are sent via the wirelss laptop which is very slow.
Am I missing a trick how can I send files directly between the 2 devices?
I was using my laptop - working in MS Word and hadn't even opend a internet browser and suddently a command prompt appears and all i managed to see before closing it from the task manager (which had it running through internet explorer i think) was that it was copying files.Its a work laptop so i would like to know if it was remote access from IT which seems doubtful on a Sunday or if i need to be concerned about security. Is there a relatively easy (considering i have zero programming experience) way for me to check if anyone logged on with remote access and who and what files were copied?
I am having difficulties saving, loading conifg files from a USB, what is the correct command for loading a config file from USB for cisco 3750x switch.
We are having issue with all our Cicso wireless devices (AIR-AP1142N-N-K9) when connected to Windows 8 Pro users. When copying large files, the connection changes to limited access. The initial connection to the access points is also slow for both windows 7 and windows 8 pcs.
I have two mac laptops and am trying to copy a directory with a number of PDFs in it. The files aren't particularly large, but there are many of them. At some point in the process the router stops and must be turned off and on before it will respond again either wirelessly or wired. I have tried the same experiment with both devices wired and the router works fine. I have tried changing the MTU, channel, beacon setting, etc. as other forum posts have tried. I tried reflashing the firmware, resetting to factory defaults and reconfiguring. So far no success. Cisco support wants me to return the router. Frankly I'm at the point of considering the former Linksys/Cisco products complete rubbish. I am going to have to buy a new router even if I return this one since I can't be without a router for any length of time.
What is the config.,which I can suggest my Bandwidth provider,so that my heavy files and small files should be downloaded at the same speed?y problem is that my bandwidth limit is 2 M.B.P.S. but I start getting drops as I start downloaded heavy files like 300 M.B. My Bandwidth provider told me that the only solution is that rate-limit will be increased. But it will be of Higher cost. Any configuration is there so that the same can be resolved without increasing Bandwidth.
I have a laptop (let me call it A) with Intel Centrino 1030-N wireless (iwlwifi module), running Arch Linux, and another laptop (I will call it B) with Atheros AR928X wireless (ath9k module), running Ubuntu 11.10. They connect to a wireless network provided by a D-Link DI-524 router (802.11g), which in turn connects to a DSL modem (10Mbps/1Mbps link)
Copying files between those machines, either through scp or mounting a share via NFS or Samba, is very slow (at most 200 KB/s) and sometimes fails (times out), even when both machines are inches away from the router. However, downloading files on either machine works correctly at the expected speeds (~1.2 MB/s).
I ran iperf, as recommended in a comment, and it gave me this: [code] The bandwidth is very low, as can be seen from those results.
I have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
whenever i try to download anything it currupts all the files its nothing to do with RAM or virus or malware as ive had 5 other peoples laptops in my hiouse and it only does it while connected to my internet as theres works perfect else where and ive just been out and bought an o2 dongle and it works fine downloads everything perfect.this ios the errors i get when trying to install winrar:
Extracting files to "C:Program FilesWinRAR" folder CRC failed in WinRAR.exe CRC failed in Formats7zxa.dll CRC failed in RarExt.dll CRC failed in RarExt64.dll
I transfered both shares to the NAS last weekend, and plan on configuring the shares to be hosted on the NAS this weekend. In order to do this, I need to copy all of the changed files to the NAS in the most efficient way possible. I was thinking of using either xcopy or robocopy. What do you think? Is there a command in either one that would allow me to copy only changed data? I don't want to wait another 18 hours worth of copying to move all the information over AGAIN
Every time I try to download files from the internet, a pop-up appears from Internet Explorer saying I am prevented from downloading files for my own security
Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on both systems but they cannot see each other in network places. I am unable to share files between the them. I have tried all the procedures mentioned in many forums but still not able to find a solution. I use Kaspersky Internet security and made chages to my firewall as per the instructions from their support forum.
Currently im on a 60mb download speed and 6mb upload speed on an Alienware M15x (Windows 7) and attempting to re-download World of Warcraft... Every time I open World of Warcraft to continue the download it will disconnect all sources from the router (I'm downloading via wireless) including the wired connection through the computer in the other room. Its really annoying everyone when were attempting to download and disconnects people...
I just received a DIR-615 in the post that I bought on eBay. I currently have a DI-624 at home .Will I be able to copy the configuration from my old router to this new one?
My computer is on a direct connection with a docsis 3 modem - with service provided by Comcast. I had no problems with the internet for about a month after signing up with Comcast at 6Mbps. Then out of no where the internet began to drop out whenever in use. When the computer is connected to the internet, and I am not actually using "bandwidth" the connection stays connected, all day with no blips. But when I try to access Youtube or some other site they demands bandwidth it drops out. Comcast has sent out 7-8 Techs to troubleshoot the issue to no avail. They have replaced the modem 3 times, the ethernet cable (is that the right word?) has been replaced, and Comcast cut holes into my walls to re-wire the entire building. I just had a guy leave from Comcast, and when he hooked up his laptop to this modem he had absolutely no problem. Then he hooked up a router, and we both used direct connect to get on the internet, and as long as his computer was connected the signal was strong with no blips. We removed his computer and the connection dropped within a few minutes. Comcast says they have verified the integrity of all their equipment, cables, splitters, main line, ect...I even tried backing up my machine and reformatting it and I still have the same issue. I've always been good about not getting virus or spyware. I have no idea why only my PC won't stay connected to the internet. Oh, also the Comcast tech hooked up a meter to the cable line and he says when the internet drops out on my end that the cable signal is still strong with no blips. When the modem goes out all the lights drop out and it has to re-identify, then it comes back up for a few minutes, only to spiral down and disconnect.
I live in an apartment, and I have a usb adapter that allows me to get on the internet wirelessly. The apartment I am at has a club house that offers free internet to people here who don't have it. If I plug in my adapter I can get a signal from the club house's wireless, and I can connect to that, and I have no problems at all on the apartments club house internet, only on my direct connect form my Comcast modem..
Here's what I need to do. I have a file server at work that I need to be able to allow our employees to access the files when they are traveling. I know the server's ip address and know how to port forward and how to share certain folders thru windows, but this is all new territory for me.
I have one machine at office and one at home, both Windows XP SP3, ADSL connection with static IP.On the office machine a have an archive of about 250 GB of files.When i am at home sometimes i need to connect to my office machine, search through those files, maybe preview some, and then download some needed files to my home machine, using a download queue feature is possible.
Radmin UltraVNC TeamViewer p300 DC++ and many variations of it.
Note: am not allowed, and don't want to install any kind or sort of server application on office machine.
i back up my very important server 2008 r2 data over a vpn to another computerall together its just under 5GB...it used to take 5 to 7 hoursnow the same data is taking 14 to 24hours...why would this be?im using netgear vfs338 vpn firewalls at each end
I struggle with how to install an IOS into an AP. And I am still not very clear on how this is to be accomplished. I have an 881W and have downloaded what I believe to be the latest IOS for this AP (ap801-k9w7-tar.152-2.JA). Problem is that I have not really found a good or at least clear set of instructions in how to load this IOS into my AP, so I have not done that yet.Does the IOS that is currently installed into the AP remain after an update or does the new IOS overwrite the current IOS. And how does one recover from a, heaven forbid, faulty installation. What is the fallback from that. How I can update my AP. Because, right now, I am most certainly hesitant to even attempt an upgrade.
i hav asa5520 i copying configuration from PIX to ASA5520 (7.2) everything working fine bt problem is that after sometime my DMZ interface losing connectivity ...
I have a wire ADSL connection and I use ADSL WiFi enabled router for distribute my internet connection with in my other devices (on my home network). When I downloading large files (more than 30MB) over the internet using my WiFi connection, my connection drop several times. However if I exchange large files within my WiFi network (with in home network via WiFi), my WiFi connection not drop (I can exchange 6GB files without any issue). Why is that? Is it my router issue or my ADSL connection issue? Most of the time after I lost internet connection, i can see my WiFi connectivity standby, it's not disconnect. However some time it completely disconnect. After I lost the connection (standby or completely disconnected) it again automatically connect.
I face this issue if i download large files on the internet, via the WiFi, if i download large files on internet using Ethernet cable, my connection not drop, it's stable. I use default wireless settings on my router? I use open WiFi connection.
My internet connction gets disconnected with in 1 hour . local area connection shows packets reciev and sent are in millions in 10 minuts . do i have a virus ?? or becouse of bytes sent and resived so much my internet gets disconnected. after disabling and reanabling my local area connection i can again use my net for some time.
So the best way to explain this is if im on the internet i wont really notice it because it happens so fast and im on the page. also its wireless internet.If i play for example league of legends il be fine then il be reconnecting then im back but the reason im reconnecting is because my connection dropped for a second.IF i open say an online game and i open a stream watching someone. Either the stream will turn off or the game will disconnect or ill get kicked from both.Ive gone into command prompt and done ping google.com and stuff sometimes its perfect then i do it again it misses 2 with time out then i do again its perfect then again time out again time out then perfect its really annoying.I recently started playing a new game and il be running then disconnect from the servers because my connection dropped for a second and ive rang bt and stuff have 2 new hubs. switch phone lines replaced filters still dont know whats going on.
I have an ADSL 2+ connection that constantly seems to be dropping at random intervals for no particular reason that i can tell anywhere from 3 to 20 times a day for over 6 months.I have a Dlink DIR-300 router which connects hard 2 pcs and a wirless connection that host for 4 devices , the Router is connected to my Dlink DSL-502T Gen 2 ADSL 2+ Router.I'm constantly having to disconnect the power wait 5 minutes and reconnect the power to get everything back online. From what i can tell the main problem is the DIR-300 router, ive checked it has the latest firmware, reset the router from factory, tested it with less connections, called up my ISP and checked everything was good on there end but to no avail[CODE]
My work has a main office and a backup office which is off site. What I am trying to do is copy a folder from one computer at the backup site to another computer at the backup site, all while sitting at my computer in the main office. Let's say the two computers at the backup site are called comp1 and comp2.Whether I use Windows Explorer, or .net VB script, or XCOPY from the command prompt, if I try to copy \comp1c_drivefolder to \comp2c_drivefolder from my computer then it takes an extremely long time - around 5 hours for 2Gb of data.
However, if I Remote Desktop into comp1, and from that machine copy C:folder to \comp2c_drivefolder then it only takes 5 minutesI can only assume that when I try to copy the folder from my computer remotely that it is transferring the data from comp1 -> my computer -> comp2, and with the computers being at different sites it's very slow. What I need to know is if I can do this remote copy using VB without the data going via my computer, i.e. straight from \comp1 to \comp2.
I thought this was the way Windows handled copying between networks anyway, i.e. straight from one to the other, my only explanation for the terrible speed is that it is going via my computer. I'm writing a basic folder-backup program in VB and would REALLY like to cut that 5 hour transfer time down to the 5 minutes I know the network can do
