I have a HTPC running XP and a Media Player connected on the same wired network. I also have a Win7 laptop connected to the same network over Wifi.
From the laptop I want to send files between the HTPC and Media player on the wired network however if I drag and drop or use the "send to" option they are sent via the wirelss laptop which is very slow.
Am I missing a trick how can I send files directly between the 2 devices?
I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files.
View 1 Replies View RelatedI have a two year old Toshiba laptop that no longer connects to the internet either via ethernet cord plugged into the laptop nor my home wireless network. I have disabled the firewalls and the problem continues. The Network Connection screen shows the computer connected locally but not no internet connection. The laptop is running Windows Vista.
View 3 Replies View RelatedMy parents bought a new computer today. My mom called me up today and asked me if I could transfer some stuff from the old computer to the new computer. I do not have a flash drive or an external hard drive, or jump drive.etc. So I was hoping I could just connect the two computers with an ethernet cable, and create a network.
Is this possible, or do you need additional equipment. I do not have a router, so if I create a network it has to be done with wires. So is it possible to create a network with nothing but an ethernet cable? Or is there another way I can get my moms i tunes transferred over?
I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files
View 9 Replies View RelatedI can't access my wireless laptop files from my wired desktop. I have tried to set up a homegroup, and it actually worked for a week or two, but now we are unable to access the homegroup or the printer.
View 1 Replies View RelatedI can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files.
View 2 Replies View RelatedWhen I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared. If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine. I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
View 1 Replies View RelatedI am working on a small business network. 8-10 computers, usually only 3-4 being used at any one time. I'm trying to improve network file transfer speeds between the local machines and a network READYNAS NV+. There are both 32 and 64 bit OS's in play. Between the READYNAS and the local machines are two non-managed switches (jumbo frames capable) and a patch panel. The cable from the READYNAS goes into the first switch, then out of that into the patch panel then into the second switch, and then out to several local machines.
Though i would love to improve performance to all the local machines, I am primarily concerned with one in particular. It has Windows 7 64 bit and an onboard Broadcom Netlink Gigabit network adapter. This device does NOT have a Jumbo frames option in the advanced settings. Here's the issue: When copying files from the READYNAS the upload speed is only 16mbps (jumbo frames enabled on the READYNAS) if I turn jumbo frames off on the READYNAS the upload speed drops to 9mbps. Just FYI, this is a photography studio and the files are always LARGE.
I have several questions that hopefully will lead to an illuminating discussion. 1) Is it possible that the universal patch is in any way a problem? Sorry if that is totally stupid, but I've never encountered one before. I understand routers and switches, but this patch thing is new to my experience. 2) Is having two switches a bottleneck? 3) Is it possible that the onboard Broadcom network adapter is junk? Why doesn't it have jumbo frames options? 4) Could I get better performance from an add on network card in a PCI-E slot and a couple of managed switches?I realize I'm all over the map here. Bottom line, I've got a small network situation here. Very simple, uncomplicated layout. All I want is better read/write performance to a single READYNAS NV+ to a handful of local machines. If I need to settle, I can live with better performance to the one single machine. 16mbps just seems tragically slow.
I was using my laptop - working in MS Word and hadn't even opend a internet browser and suddently a command prompt appears and all i managed to see before closing it from the task manager (which had it running through internet explorer i think) was that it was copying files.Its a work laptop so i would like to know if it was remote access from IT which seems doubtful on a Sunday or if i need to be concerned about security. Is there a relatively easy (considering i have zero programming experience) way for me to check if anyone logged on with remote access and who and what files were copied?
View 2 Replies View RelatedI am having difficulties saving, loading conifg files from a USB, what is the correct command for loading a config file from USB for cisco 3750x switch.
View 1 Replies View RelatedWhen I use ASDM or the CLI to copy (ftp) files from my management station to flash on my ASA5520. I get to 99% and then the gui or cli window hangs.
The ASA itself completely freezes i.e. no traffic in or out until I kill the transfer window and then it may reboot
[and yes, there is more than enough free space on the flash file system for the files]
ASA5520 V8.2(3) / ASDM V6.4(5)
We are having issue with all our Cicso wireless devices (AIR-AP1142N-N-K9) when connected to Windows 8 Pro users. When copying large files, the connection changes to limited access. The initial connection to the access points is also slow for both windows 7 and windows 8 pcs.
View 3 Replies View RelatedI have a small business network that connects 3 wired pc's and 2 wireless laptops. I am running a point of sale system on the network. I recently replaced the computer I use as a server. The work stations now run the point of sale system so slowly, they almost cannot be used. Both the wired and wireless systems are running slower. Both wired workstations are running Windows XP, both the old and new "server" are running Windows 7 64 bit. Both are Pentium dual core with 6gb of RAM. The old system has a Realtek RTL8168C network card, and the new system has an Intel 82579V network card. I replaced the computer due to other hardware issues. The cable used to connect it to the router is the same. The old machine ran the workstations MUCH faster. Does this have to do with the network card, or some other setting I am missing.I tried to make all the settings exactly the same so my point of sale system would still recognize the new computer.
View 4 Replies View RelatedMy Laptop IP 192.168.0.198 cannot see shares with desktop 192.168.0.199. Both PC's are win 7 with firewalls turned off. However the desktop can see shares on laptop. All computers are part of WORKGROUP. When wireless i can ping desktop.When i plug Ethernet cable to laptop 192.168.0.196 I can access desktop files.Also weird thing i have turned off password protection sharing but still asked for password (can live with that though)
View 1 Replies View RelatedI have two mac laptops and am trying to copy a directory with a number of PDFs in it. The files aren't particularly large, but there are many of them. At some point in the process the router stops and must be turned off and on before it will respond again either wirelessly or wired. I have tried the same experiment with both devices wired and the router works fine. I have tried changing the MTU, channel, beacon setting, etc. as other forum posts have tried. I tried reflashing the firmware, resetting to factory defaults and reconfiguring. So far no success. Cisco support wants me to return the router. Frankly I'm at the point of considering the former Linksys/Cisco products complete rubbish. I am going to have to buy a new router even if I return this one since I can't be without a router for any length of time.
View 8 Replies View RelatedI am trying to see, share, and play music that is currently on my laptop, from my desk computer.
View 1 Replies View RelatedI've got a PC(windows 7) connected to a wired router(not wifi), and I also have a laptop that shares the internet with the PC using wifi. A wired printer is connected to the PC. Is it possible for me to share files and print using laptop? (Wifi Connected to a Wired Internet connection)
View 3 Replies View RelatedI have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies View RelatedI currently have my ISP-supplied modem wired to both my router and an old, old desktop. Can I run this network without using a desktop ethernet connection & throw away the desktop?
View 3 Replies View RelatedI have some servers running in my office and I have hooked them to a wireless router. I want to access those servers from my work laptop. At this time, I have to disconnect from my company network and assign static IP to wireless interface to access those servers. is there a way to configure my laptop so that i can be hooked to my company network through wired interface and can access my servers through wireless interface which is configured with static IP
View 9 Replies View RelatedI am having Dell Inpiron 4030. Following are specs
Quote: Quote:
Processor: Intel(R) Core(Tm) i3 CPU M380 @2.53GHz
RAM - 2.00 GB
OS - Windows 7 ultimate 32 but
I am unable to connect to the wired network. We have a 4 port prolink router and there is no error with it. I know because I am using the same cable for my laptop, which I am using for my desktop. I just unplug it from the desktop and plug it to laptop. I am unable to provide any specs from the desktop because there is an error in that computer.
However, I can give ipconfig/all data from my father's computer, which use another port of the same router.
My laptop is working perfectly with the Mobile BroadBand. And this is a dual boot computer with Ubuntu 12.04 LTS and the cable is fine with Ubuntu.
Following is the result of ipconfig/all
Quote:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersyohan>ipconfig/all
[Code].....
I have a wired desktop PC (HP dx2480) running XP SP3 connected to a LinkSys Wireless 4-port router, and a laptop (Lenovo X61) running XP SP3 connected wireless to the same home network (192.168.0.x). The LinkSys connects by cable to a DSL router for internet access. Both PC and laptop get DHCP IPs from the Linksys (which I have hard-coded - mapped MAC to IP). They are on the same Windows Workgroup "HOME". Both Desktop and Laptop have same Windows User Logins. My desktop had a virus attack (trojan), which I removed and re-installed XP SP3 (from HP disks). Since then the PC seems to have "network sharing and discovery issues" on the network.
- The wired PC CAN ping the laptop, but laptop CANNOT ping PC.
- Both laptop and PC CAN access the internet.
- The laptop and PC COULD NOT see each other on Windows Workgroup, or see shares. This got resolved once I added IPX/SPX/NetBios Protocol on both the wired and wireless NICs on both PC/laptop respectively. NOTE: Before adding this protocol, I double-checked that File-Printer Sharing was enabled on both NICs, Windows Firewall had File-Print Sharing as exclusion. I tried everything including disabling firewall on both, disabling McAfee scanning on both, disabling Firewall on Linksys, but nothing worked.
- The laptop CAN see the NAS (Seagate GoFlexHome - connected by cable to LinkSys) using Seagate Dashboard software and direct IP. The PC CANNOT access the NAS using the Dashboard software but CAN access through direct IP. The NAS is named "goflex_home", which both can discover as \goflex_home from explorer.
- The laptop CAN see ITunes Home Share from a NAS, but the PC CANNOT see any home shares on the NAS (or from the laptop). I even added Home Sharing TCP/UDP ports as exceptions on the Firewall on the PC, but it still doesn't work.
- Some blog checking the node type on IP addresses given by DHCP. The laptop has Node Type "Hybrid", and the PC has "Unknown". I even went to PC regedit.exe and modified the and Change EnableProxy to 0 or 1 (instead of 2 that was in the PC as default).
- I have used SG TCPOptimizer on both laptop and PC to revert to Windows default?
On the basement level, and on level 2, I have in wall junction boxes where the Cat5E Ethernet wires come together. There are 6 lines that go from the level 2 box to 6 wall jacks on levels 2 and 3. There are also 6 lines that go from the basement box to 6 wall jacks in the basement and on level 1. There is also a Cat5E line running between the two boxes.I have wired all these plugs on both ends with T568B standard, and in each box they go into a patch panel. I have used a cable tester to test and make sure all these plugs are properly wired. I have also tested individual computers hardwired linked through to my router (without going through switches) and confirmed that they work that way, so I'm pretty sure I've wired it correctly.
At the second floor box, I have an AT&T 2Wire wifi router and modem, with AT&T Uverse service. I also have a monoprice Ethernet switch. In the basement box, I have another monoprice Ethernet switch (link to the type of switches I have is below). The switches are connected together via the Cat5E that runs between the boxes, and the second floor switch is connected to a free port on the back of the AT&T 2Wire Uverse wifi router.These wall plugs are not all currently used. In fact the problem I describe below occurs even if nothing is plugged into the wall plates.My problem is: when I hook up everything, so my wifi router is wired to the first switch, which is in turn wired to the 6 wall plugs upstairs as well as to the switch in the basement, and that basement switch is in turn wired to the 6 wall plates downstairs... at that point when I plug it in, my wifi stops working. Basically, whenever my router is plugged into this hard wired network, the wifi stops working. When I unplug the network, the wifi comes back (I usually reset it, not certain if it would come back just from waiting).
Interestingly, it doesn't necessarily stop working if most or all of the plugs are removed so the network is not connected (for example, if I just go through one plug instead of all of them)Does a network of wired Ethernet, even if not plugged into anything, cause some sort of a load or drain on the router that could make it stop working?
I have a laptop connected to internet via a router using WiFi.My desktop computer doesn't have a WiFi connection. I want to connect my laptop and my desktop computer using an ethernet cable in order to access the internet on my desktop computer. I've been fiddling around for over two hours with no luck so far. Both computers are on Windows 7.
View 3 Replies View RelatedI'm sort of new to networks so I'm not sure if this is even possible but what I'm trying to do is set up a wired network between computers but leave the wifi on the computer as how it connects to the internet. I'm using two computers connected through a lynksys router(not connected to the internet) and ethernet cable, and one of the computers has a wireless card that connects to another router that is connected to the internet. i can set up a network between the two computers but then the one can't connect to the internet(even though it says it is connected the network with internet),
View 2 Replies View RelatedMy work has a main office and a backup office which is off site. What I am trying to do is copy a folder from one computer at the backup site to another computer at the backup site, all while sitting at my computer in the main office. Let's say the two computers at the backup site are called comp1 and comp2.Whether I use Windows Explorer, or .net VB script, or XCOPY from the command prompt, if I try to copy \comp1c_drivefolder to \comp2c_drivefolder from my computer then it takes an extremely long time - around 5 hours for 2Gb of data.
However, if I Remote Desktop into comp1, and from that machine copy C:folder to \comp2c_drivefolder then it only takes 5 minutesI can only assume that when I try to copy the folder from my computer remotely that it is transferring the data from comp1 -> my computer -> comp2, and with the computers being at different sites it's very slow. What I need to know is if I can do this remote copy using VB without the data going via my computer, i.e. straight from \comp1 to \comp2.
I thought this was the way Windows handled copying between networks anyway, i.e. straight from one to the other, my only explanation for the terrible speed is that it is going via my computer. I'm writing a basic folder-backup program in VB and would REALLY like to cut that 5 hour transfer time down to the 5 minutes I know the network can do
In the next month or so I plan to replace my old desktop PC. It is currently connected to a Linsys E3200 wireless router. I have many other wireless devices also running off the E3200, but my PC is the only wired device connected to it. When I replace the wired PC do I simply switch the new one in with the existing ethernet connection (I'm sure it is not that simple) or do I have to start over again recreating my entire network..security etc.. ? If so what is the process to start over ? Do I have to reset something on the router, reload cisco connect, create a new network name?
View 4 Replies View RelatedMy laptop cannot see my wi-fi network, but it can see a lot of others for example my neighbour's.It is not a problem with my network, however as my iPad and my day's laptop can connect fine.
View 1 Replies View RelatedMy laptop is not connecting to my wifi network, my phone and my other laptop are connected to the same; also if I use a lan cord it is working fine.
View 1 Replies View RelatedI would like to make a network for my house where my laptop connects to my home wifi and other computers can connect to my laptop and get internet, almost like ad-hoc but i would like it to work with infrastructural devices also i do have some spare routers available.
View 3 Replies View RelatedI am unable to get my laptop to connect to the internet when my wifi network has any type of security option or authentication selected. i want to password protect my network and it shows that the network name and passphrase i selected are correct on the router setup page. I can connect to wifi just fine when there is no authentication set on the network, but when I change it to WPA2 or WEP or any type of security on the router setup page, my laptop is able to find the network and connect with local only access. it gives me the option to reset the network adapter or generate a new ip address, but the problem still persists, and the connection only works when there is no password. is it my laptop or the router that is the problem. it has worked previously with a different router with password security.
View 2 Replies View RelatedI have an Asus 1001 PG netbook. I am having problems with my home wifi network. When I turn on my laptop, I do not receive the signal for our home wifi network. However, I know that the network is working because other laptops at home are able to detect it. I don't think there is anything wrong with the laptop because I can still detect other wifi networks in our neighborhood. The problem only seems to be with our home wifi network. If I restart the computer, the problem is usually solved. This is not an efficient solution for me as I am used to turning my laptop off on hibernate and I don't like having to reopen all my documents.
View 1 Replies View Related
