Cisco WAN :: Saving / Copying Config Files Using Usb In 3750 Switch

Sep 9, 2012

I am having difficulties saving, loading conifg files from a USB, what is the correct command for loading a config file from USB for cisco 3750x switch.

View 1 Replies


ADVERTISEMENT

Cisco WAN :: 2811 - Startup Config Is Not Copying To Running Config

Nov 15, 2009

I have a Cisco 2811 router and when I turn of the router the running config is lost. I have to the following to get the router running of the start-up config settings.

router#copy start-up running-config

View 9 Replies View Related

Cisco Wireless :: LAP1142N Not Saving Config

Feb 11, 2013

I have a wireless deployment using a 5508 controller and 90+ LAP1142N lightweight access points.Everything is going relatively well, except I have about 3 that do not keep their config (hostname and AP group) past a reboot of the access point.When they do come up after a reboot, they go back to the default hostname of the mac address and are placed in the default-group AP group.

View 5 Replies View Related

Cisco Switching/Routing :: Config Port Forwarding In 3750 Switch

Nov 6, 2012

I have a 3750 catlyst switch in my network and it is like a distubation switch,And for the nating and dhcp nomadix is using as gateway in the same network. for one of my local PC i need to config the port forwarding in 3750 switch. How to config the port forwarding on 3750 switch,

View 3 Replies View Related

Cisco Switching/Routing :: 3750 Lab Switch Control And Config Restore

Nov 16, 2011

I am in the process of setting up an interop lab for some engineers. The enviornment will consist of some 3750's, H3C's and ProCurves. My concern is that the end user will have Priv-Exec access for CLI usage on the 3750's and they can change the "en" password (I hope they don't but it has happened).Is there a way I can "break in" during the boot process to reset the password? The reason I am doing it this way is because I have an Altiris server with rebuild automation scripts in xpect and I would like to automate the process so I do not have to use a manual factory default reset.

View 5 Replies View Related

Copying Files From Old To New Computer?

Jan 14, 2012

My parents bought a new computer today. My mom called me up today and asked me if I could transfer some stuff from the old computer to the new computer. I do not have a flash drive or an external hard drive, or jump drive.etc. So I was hoping I could just connect the two computers with an ethernet cable, and create a network.

Is this possible, or do you need additional equipment. I do not have a router, so if I create a network it has to be done with wires. So is it possible to create a network with nothing but an ethernet cable? Or is there another way I can get my moms i tunes transferred over?

View 10 Replies View Related

Cisco Firewall :: ASA 5510 - Saving Config Via Scp Doesn't Work After Updating To 8.24

Apr 5, 2011

since our update of Cisco ASA 5510 (active/standby cluster) from version 8.22 to version 8.24 it isn't possible to transfer files from/to a sftp client. The request just times out. SSH from this client is possible.

[Code]...

View 2 Replies View Related

Internet Drops Out When Copying Files Over LAN?

Apr 29, 2012

I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files

View 9 Replies View Related

Saving / Updating Network Files To Intranet?

Aug 23, 2011

I am trying to put a link on our Intranet page to several documents that are updated daily by specific users. These users save the documents in their department folders, which are only acessible by their department and I.T. (me). Right now I have a .bat file that checks every half hour of the work day to see if it has been updated, if it has it will be moved to a location in the Intranet folder which will update the link on the Intranet. While users can view the Intranet, they do not have access to view the files or folders that house the Intranet html coding etc.This option works but our users are complaining that it isn't instantaneous. Any ideas how I can do this on a network while keeping everyone's security in place and not give them extra rights to the Intranet folders?

View 3 Replies View Related

Windows 7 - Internet Drops Out When Copying Files Over LAN?

Apr 29, 2012

I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files.

View 2 Replies View Related

Slow Opening / Saving Files Through Remote VPN Access

Feb 12, 2012

I'm accessing a NAS server remotely through VPN (Netgear FVG318). I can connect to the NAS server but it is very slow when opening and saving documents. When accessing the network drive I am connected to the Internet through wireless connection. When I connect to the Internet through Ethernet cable opening and saving documents is much quicker. Is there anyway I can make the remote access quicker when accessing it through a wireless connection?

View 1 Replies View Related

Copying Files From Windows 7 To XP / Server 2003 Hangs

Apr 22, 2011

When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared. If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine. I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.

View 1 Replies View Related

Copying Files From ReadyNAS - Upload Speed Is Only 16mbps?

Apr 21, 2012

I am working on a small business network. 8-10 computers, usually only 3-4 being used at any one time. I'm trying to improve network file transfer speeds between the local machines and a network READYNAS NV+. There are both 32 and 64 bit OS's in play. Between the READYNAS and the local machines are two non-managed switches (jumbo frames capable) and a patch panel. The cable from the READYNAS goes into the first switch, then out of that into the patch panel then into the second switch, and then out to several local machines.

Though i would love to improve performance to all the local machines, I am primarily concerned with one in particular. It has Windows 7 64 bit and an onboard Broadcom Netlink Gigabit network adapter. This device does NOT have a Jumbo frames option in the advanced settings. Here's the issue: When copying files from the READYNAS the upload speed is only 16mbps (jumbo frames enabled on the READYNAS) if I turn jumbo frames off on the READYNAS the upload speed drops to 9mbps. Just FYI, this is a photography studio and the files are always LARGE.

I have several questions that hopefully will lead to an illuminating discussion. 1) Is it possible that the universal patch is in any way a problem? Sorry if that is totally stupid, but I've never encountered one before. I understand routers and switches, but this patch thing is new to my experience. 2) Is having two switches a bottleneck? 3) Is it possible that the onboard Broadcom network adapter is junk? Why doesn't it have jumbo frames options? 4) Could I get better performance from an add on network card in a PCI-E slot and a couple of managed switches?I realize I'm all over the map here. Bottom line, I've got a small network situation here. Very simple, uncomplicated layout. All I want is better read/write performance to a single READYNAS NV+ to a handful of local machines. If I need to settle, I can live with better performance to the one single machine. 16mbps just seems tragically slow.

View 11 Replies View Related

Copying Files Over Wired Network Via Wifi Laptop?

Jun 30, 2012

I have a HTPC running XP and a Media Player connected on the same wired network. I also have a Win7 laptop connected to the same network over Wifi.

From the laptop I want to send files between the HTPC and Media player on the wired network however if I drag and drop or use the "send to" option they are sent via the wirelss laptop which is very slow.

Am I missing a trick how can I send files directly between the 2 devices?

View 2 Replies View Related

Command Prompt Suddenly Appeared Copying Files?

Nov 18, 2012

I was using my laptop - working in MS Word and hadn't even opend a internet browser and suddently a command prompt appears and all i managed to see before closing it from the task manager (which had it running through internet explorer i think) was that it was copying files.Its a work laptop so i would like to know if it was remote access from IT which seems doubtful on a Sunday or if i need to be concerned about security. Is there a relatively easy (considering i have zero programming experience) way for me to check if anyone logged on with remote access and who and what files were copied?

View 2 Replies View Related

Saving Passwords For Access To Shared Files On Windows Server 2K3?

Aug 20, 2011

We've recently installed Windows Server 2003 at our small office for data storage, and have set up shared folders in the Win Server 2K3 for access from about a dozen Win XP Pro machines.Upon the first access of these shared folders from a Win XP Pro machine, we're required to enter a User Name & Password for the Win Server 2K3 machine:Is there a work-around for this? Perhaps some method in WinXP Pro to save the username/password? As it stands now, any time one of the WinXP Pro machines gets rebooted, or if the server gets rebooted, users of the Win XP Pro machines have to re-enter the username/password, and I'd like to find if there's away around having to re-enter that info.

View 5 Replies View Related

Home Network :: BR-6228nC - Internet Drops Out When Copying Files Over LAN?

Apr 29, 2012

I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files.

View 1 Replies View Related

Cisco Firewall :: ASA 5520 - Copying Files To Flash Hangs / Reboots

Sep 8, 2011

When I use ASDM or the CLI to copy (ftp) files from my management station to flash on my ASA5520. I get to 99% and then the gui or cli window hangs.
 
The ASA itself completely freezes  i.e. no traffic in or out until I kill the transfer window and then it may reboot
 
[and yes, there is more than enough free space on the flash file system for the files]
 
ASA5520 V8.2(3) / ASDM V6.4(5)                                  

View 1 Replies View Related

Cisco Wireless :: AIR-AP1142N-N-K9 Connection Changes To Limited Access When Copying Large Files

May 26, 2013

We are having issue with all our Cicso wireless devices (AIR-AP1142N-N-K9) when connected to Windows 8 Pro users.  When copying large files, the connection changes to limited access. The initial connection to the access points is also slow for both windows 7 and windows 8 pcs.

View 3 Replies View Related

Linksys Wireless Router :: E1000 Router Crashes When Copying Files Wirelessly

Dec 28, 2012

I have two mac laptops and am trying to copy a directory with a number of PDFs in it. The files aren't particularly large, but there are many of them. At some point in the process the router stops and must be turned off and on before it will respond again either wirelessly or wired. I have tried the same experiment with both devices wired and the router works fine. I have tried changing the MTU, channel, beacon setting, etc. as other forum posts have tried. I tried reflashing the firmware, resetting to factory defaults and reconfiguring. So far no success. Cisco support wants me to return the router. Frankly I'm at the point of considering the former Linksys/Cisco products complete rubbish. I am going to have to buy a new router even if I return this one since I can't be without a router for any length of time.

View 8 Replies View Related

Cisco WAN :: 3560x Switch - Copying IOS File To Flash / Failed To Boot

Jan 20, 2013

I have a 3560x switch with the flash formatted . I have tried to solve the problem by copying the IOS file to the flash. But the boot failed either .I have tried to copy the same IOS by the Xmodem, The boot failed again.My question is how to fixed the boot issues after the flash was formatted?

View 4 Replies View Related

Cisco Switching/Routing :: Copying IOS From Standby To Active Supervisor 4507 Switch

Jun 4, 2012

I was upgrading IOS on 4507 R with dual supervisor.I download the IOS on Active supervisior and did reboot.After reboot i login to switch then i got switch standby prompt.I found that after reboot active supervisior  became standby supervisior.
 
Now new IOS  is on standby supervisior.Need to confirm below..So this means that IOS  does not syn  within the  supervisiors as compared to config  right ?
 
-Which command i can use that will copy IOS from standby supe to Active supe??
 -Which command i can use that will show both active and standby supe with new IOS?
 -Is there any command that i can use to switchover from active to standby supe??

View 3 Replies View Related

Cisco WAN :: 3750 Stack Unable To Save Config

Jul 4, 2012

I have a 3750 stack of 4 switches that was installed about 2 years ago. Recently I was doing some work on the switch and realized that I am unable to save the config. I amobviously concerned that if the power fails or the switch reboots I will be reconfiguring it and that is not something I am interested in doing!

[code]...

View 1 Replies View Related

Cisco Switching/Routing :: 3750 Add A Config To Stack?

Mar 15, 2012

I have been given 2 3750 switches and need to put a config onto it wuld is for 2 3750's in a stack, how should I put this on the 2 switches?  Is it bested to install it onto 1 switch first then physically attach the 2nd after?

View 3 Replies View Related

Cisco Switching/Routing :: QOS Config On 3560 Switch

Jul 22, 2012

I'm in the process of configuring QOS on a 3560 routing switch in a GOLD, SILVER, BRONZE priority type scenario.
 
Firstly, I understand that this config will add a tag of "precedence 5" to a packet if it matches the "ACL_QOS_GOLD_In" access list. Question is does the router see this "precedence 5" tag and then sets the priority, or am I missing something in my config where at present it just sees the "precedence 5" and doesn’t act on it ?
 
Secondly, Since the "precedence 5" tag has already been added to the packets, do downstream routers see this tag and act accordingly or so I need to configure those is well ? [code]

View 2 Replies View Related

Cisco Switching/Routing :: 3750 / 3800 - Configure Trunk Between Switch And Extreme Switch

Nov 2, 2011

i have an issue to connect a trunk between cisco switch and extreme switch i have many vlans that i want to cross via a link between cisco 3750 switch and a Extreme Alpine 3800 switch

View 12 Replies View Related

Cisco Switching/Routing :: 3750-X Stacking Switch By Switch

Nov 18, 2012

I have two 3750-X configured to be a stack and I am planning to re-rack these somewhere else.  What I would like to know is what are the effects of having the master switch itself lose power?  Does it immediately just make the member take over master (there should be no election since there are only 2 switches??) and there would be no loss of connectivity?

View 1 Replies View Related

Cisco Switching/Routing :: SF 300-24 Switch Won't Boot After VLAN Config / Reboot

Jul 28, 2012

I was trying to configure an SF 300-24 for use in my home and obviously did something dumb. It was working fine. The f/w was updated and I had configured 2 VLANs. VLAN2 was ports 1-6+GE1 for IPTV streaming and VLAN3 was ports 7-24+GE2 and GE3 for the rest of my LAN. I was plugged into GE4 and was configuring the switch with a laptop. GE4 was the only port still on the default VLAN1. I chaged the default VLAN to VLAN3, which forced a reboot and the switch never came back up. Attached is what I see when I connect to the console port: [code]

I can't access to GUI using it's static IP or it's default IP on any port and the console never reaches the point where I can log in. The System light is flashing green but the boot sequence never progresses past what's in the screen shot. I tried to do a hard reset using the recessed button on the front panel but it does not seem to have any effect, no matter how long I hold it down.

View 5 Replies View Related

Cisco Switching/Routing :: CE520-8PC Switch - Port Won't Allow Initial Config

Mar 9, 2013

I have a WS-CE520-8PC Switch. I have tried a full 30/30/30 reset, factory reset, and I am still unable to access the express setup page. Running Win7 x64 on the host os (have tried windows 2000 and xp)It also wont allow me to access direct managment mode when pressing the admin button for 10 sec.

View 2 Replies View Related

Cisco Switching/Routing :: How To Get 3560 Switch To Run From New Config File On Reload

Nov 7, 2011

I uploaded a new config file via TFTP to a 3560 switch.  What are the order of commands to get it to boot from this new config file instead of the file listed in 'sh boot': [code]

View 7 Replies View Related

Cisco Switching/Routing :: 2600 Switch Ports Don't Even Show Up On Router Config

Jan 10, 2012

My network generally runs older routers (2600 series) with 16 port switch modules (NM-ESW-16).   This has always worked great since I can configure the router and the switch ports on the fly, making changes to either as necessary.  Well I am upgrading to 2811 routers, and we wanted to get gigabit ethernet ports on our switch modules.  I think I made an error when I purchased a few of these switch modules:  NME-16ES-1G.   
 
The first problem, is that the switch ports don't even show up on the router config, I have to establish a session into the switch, (And I can't seem to get back to the router unless I manually switch off power and restart).  I don't like this type of switch module, it's like I'm running a completely separate device, and while having a layer 3 switch is cool, It doesn't let me setup routing protocols so I don't like doing it this way.  I want to go back to using a switch module that simply adds a ton of ports to my router like the NM-ESW-16.  (Note:  The NM-ESW-16 does actually work in the 2811 and would be perfect if it were Gigabit speed.)
 
The seconds problem is that the NME-16ES-1G isn't actually a Gigabit switch.  It has a single gigabit port, but the 16 ports are all Fastethernet, and not gigabitethernet.  So ideally, I am looking for a switch module that I can fully configure from the router interface that has 16 gigabitethernet ports, and works with a 2811. IE I want to do this. [code]

View 4 Replies View Related

Transfer Files Through 1Gigabit Switch?

Dec 13, 2012

I have a D-Link Gigabit switch and I am trying to transfer files from my laptop (directly connected to switch) to my external hard drive (also connected to switch):The problem is that I get very slow speed for a transfer of a single file. It seems that the network utilization goes to 25%(normal) for just a few seconds and then it drops to 2-3%Please see attached image and propose what I should check.

View 6 Replies View Related

Share Files Each Other Without Using Switch Hub Or Router?

Aug 10, 2012

i have 2 desktop and 1 laptop and i want to share files each other without using switch hub or router.

my server core2 dou and have built in lan card and 1 NIC
my client desktop pentium 4 and have built in lan card
my client desktop intel celeron and built in lan card

i crimped 2 crossover utp cable, check my color coding:
A Stripe white orange
Orange
Stripe green white
Blue
Stripe blue white

[code]....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved