Copying Files From ReadyNAS - Upload Speed Is Only 16mbps?
Apr 21, 2012
I am working on a small business network. 8-10 computers, usually only 3-4 being used at any one time. I'm trying to improve network file transfer speeds between the local machines and a network READYNAS NV+. There are both 32 and 64 bit OS's in play. Between the READYNAS and the local machines are two non-managed switches (jumbo frames capable) and a patch panel. The cable from the READYNAS goes into the first switch, then out of that into the patch panel then into the second switch, and then out to several local machines.
Though i would love to improve performance to all the local machines, I am primarily concerned with one in particular. It has Windows 7 64 bit and an onboard Broadcom Netlink Gigabit network adapter. This device does NOT have a Jumbo frames option in the advanced settings. Here's the issue: When copying files from the READYNAS the upload speed is only 16mbps (jumbo frames enabled on the READYNAS) if I turn jumbo frames off on the READYNAS the upload speed drops to 9mbps. Just FYI, this is a photography studio and the files are always LARGE.
I have several questions that hopefully will lead to an illuminating discussion. 1) Is it possible that the universal patch is in any way a problem? Sorry if that is totally stupid, but I've never encountered one before. I understand routers and switches, but this patch thing is new to my experience. 2) Is having two switches a bottleneck? 3) Is it possible that the onboard Broadcom network adapter is junk? Why doesn't it have jumbo frames options? 4) Could I get better performance from an add on network card in a PCI-E slot and a couple of managed switches?I realize I'm all over the map here. Bottom line, I've got a small network situation here. Very simple, uncomplicated layout. All I want is better read/write performance to a single READYNAS NV+ to a handful of local machines. If I need to settle, I can live with better performance to the one single machine. 16mbps just seems tragically slow.
View 11 Replies
ADVERTISEMENT
Jan 14, 2012
My parents bought a new computer today. My mom called me up today and asked me if I could transfer some stuff from the old computer to the new computer. I do not have a flash drive or an external hard drive, or jump drive.etc. So I was hoping I could just connect the two computers with an ethernet cable, and create a network.
Is this possible, or do you need additional equipment. I do not have a router, so if I create a network it has to be done with wires. So is it possible to create a network with nothing but an ethernet cable? Or is there another way I can get my moms i tunes transferred over?
View 10 Replies
View Related
Mar 24, 2011
I am with Virgin media (UK) and have the 20mbps fiber optic connection. My area has recently been having problems with the broadband and Virgin has recently fixed these problems. However I used to get around 19mbps now that the problem is fixed my computer which is wired to the router gets about 0.4mbps downstream... However the 5 wireless computers all get 16mbps which is pretty good for them. Windows tells me that its a firewall issue and I currently can't use two programs, spotify and steam. They both have firewall issues, even if I turn off my firewall which is the windows one. I also have avast, and when I turn that off, still no good. I used OpenDNS, stopped using that flushed my DNS, that didnt work. I tried to optimize my computer settings, by changing various values in Regedit.All of this has done nothing. I should add that I have recently re-installed Windows 7 so on this fresh install it has never had decent internet speed. Which I thought was weird.. I have basically had these problems since the fresh install. All of my drivers are up to date.
View 10 Replies
View Related
Apr 29, 2012
I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files
View 9 Replies
View Related
Apr 29, 2012
I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files.
View 2 Replies
View Related
Apr 22, 2011
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared. If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine. I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
View 1 Replies
View Related
Jun 30, 2012
I have a HTPC running XP and a Media Player connected on the same wired network. I also have a Win7 laptop connected to the same network over Wifi.
From the laptop I want to send files between the HTPC and Media player on the wired network however if I drag and drop or use the "send to" option they are sent via the wirelss laptop which is very slow.
Am I missing a trick how can I send files directly between the 2 devices?
View 2 Replies
View Related
Nov 18, 2012
I was using my laptop - working in MS Word and hadn't even opend a internet browser and suddently a command prompt appears and all i managed to see before closing it from the task manager (which had it running through internet explorer i think) was that it was copying files.Its a work laptop so i would like to know if it was remote access from IT which seems doubtful on a Sunday or if i need to be concerned about security. Is there a relatively easy (considering i have zero programming experience) way for me to check if anyone logged on with remote access and who and what files were copied?
View 2 Replies
View Related
Apr 29, 2012
I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files.
View 1 Replies
View Related
Sep 9, 2012
I am having difficulties saving, loading conifg files from a USB, what is the correct command for loading a config file from USB for cisco 3750x switch.
View 1 Replies
View Related
Sep 8, 2011
When I use ASDM or the CLI to copy (ftp) files from my management station to flash on my ASA5520. I get to 99% and then the gui or cli window hangs.
The ASA itself completely freezes i.e. no traffic in or out until I kill the transfer window and then it may reboot
[and yes, there is more than enough free space on the flash file system for the files]
ASA5520 V8.2(3) / ASDM V6.4(5)
View 1 Replies
View Related
May 26, 2013
We are having issue with all our Cicso wireless devices (AIR-AP1142N-N-K9) when connected to Windows 8 Pro users. When copying large files, the connection changes to limited access. The initial connection to the access points is also slow for both windows 7 and windows 8 pcs.
View 3 Replies
View Related
Jan 11, 2011
Recently my desktop has experienced very slow download speeds (~0.11 Mbps), however the upload speed appears to be in line (~2.0Mbps). These numbers are taken from Comcast's speed test (my ISP). It is obviously a problem with my PC because everything else on the network (PS3, Laptop) have great signals with no problems. I just recently reverted the Desktop back to its factory state, and everything was working fine for a couple of months. The desktop in question uses Vista 32-bit and the Belkin Basic USB Wireless Adapter.
View 1 Replies
View Related
Mar 17, 2011
I live in the tampa bay area, I have bright house (BHN) as my service provider, which provides a Road Runner Lightning (40/5) package. I previously used BHN's top tier (20/2) back in July (and prior) with no problems.
After converting to Lightning in August of this year (2010). Of course, BHN (and every other provider) wants to force a modem/router down your throat, so I had them bridge it (in short, turn it into a dummy modem with no routing). I had an SMC branded modem gateway at the time. I work from home 2 days a week (so I can spend more time with my kids during morning, lunch, right after work) and this requires me to use QoS to ensure my VOIP work calls don't get dropped, if the family is watching youtube videos or watching netflex.
My network was as follows SMC Modem >WAN IP>>WAN Port>>D-link DIR-655>>Switch Ports>PC1, PC2, PC3
Everything seemed fine (from a usability stand point) till about 2 weeks ago when my upload speed seemed to grind to halt. Normally I was able to upload about 200-300K per second, and I noticed this dropped to about 45K per second during a drop box upload. First thing I did was power cycle both my modem and router (in the proper/usual order). After they both come up, I start using speed test to find out what my upload speeds were. I was getting about 39Mbps down, but only .56Mbps up still. I factory reset my router.... test, similar speeds. Power cycle all computers (just in case), and then modem/router. Tested, similar speeds. Updated the firmware to the latest. Same issue
Called BHN customer service, they factor reset it, but it wasn't in bridge mode. If I by passed the 655, in factory mode (non bridge mode) upload speeds returned to better than expected states. If I bridged the cable modem, upload speeds seemed to crash.
Had BHN replace the modem, seemed fixed for a day, then issue came back. Had them come back out and replace it again, this time with a Motorolla Surfboard modem... same issue. Fine during factory reset, however after they bridge the modem, upload speeds were fine. Told BHN I would take it from there.. Connected up the DIR-655, and upload speeds crashed again. (.6Mbps). Called D-Link Support, and the Chinese English speaking rep seemed to not be listening to me and tried to have me adjust my MTU as well as Wireless settings. Long story short... the rep was a level 0 id10t and I hope D-link will consider hiring better employees/contractors. So I was all about to give up and replace it with a DD-WRT capable router (which it takes me a lot to want to swap hardware), when I discovered the wan shaping was on. Which I thought to myself... nah... QoS has never messed up before... why would it be the cause. Turned off wan shapping... and voila. Issue seemed to be insta-resolved.
Unsatisfied with that... I decided to dig a lil deeper. I turned on Wan shaping again, but decided to set the settings manually instead of auto detect.
Here are the settings I used... (Advanced Tab>QoS)
Enable Traffic Shaping - Checked
Automatic Uplink Speed - Unchecked
Manual Uplink Speed - 5000
Connection Type: Cable or Other Broadand Network
Enable QoS Engine - Checked Automatic Classification - unchecked (this checked seemed to affect my upload speed by about 5-10% during testing) Dynamic Fragmentation - unchecked (this checked seemed to be the worse enemy for upload speed)
While I know I'm not any network guru (still have to use a subnet calculator for subnetting), I think I did a pretty good job drilling down the issue (once I got passed my service provider replacing modems).
Anyways, I've had overall good luck with D-Link products, even have a 5 port 10/100 switch (all metal) from 1998 that works great. Hopefully, D-Link will just either put more documentation on the web, or hire better employees.
View 3 Replies
View Related
Apr 3, 2013
I have 50GB storage on box.com and DropBox.So i just want to back up my files there.Web interface just sucks and offers no customization.Their desktop programs are only to sync, and dont do much to just upload.I dont wanna sync folders, i just want to upload files!
View 13 Replies
View Related
Aug 12, 2012
My new computer can't upload any of my files like in facebook and yahoo. I try some speed test, download is okay but upload is not. I turned off my firewall and nothing happens.
here's my ipconfig /all
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
D:WINDOWS>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : jethron
Primary Dns Suffix . . . . . . . :
[code]....
View 2 Replies
View Related
Jul 21, 2011
I have a cisco E1000 router and I am unable to upload files, everything else seems to be working fine
View 2 Replies
View Related
Dec 28, 2012
I have two mac laptops and am trying to copy a directory with a number of PDFs in it. The files aren't particularly large, but there are many of them. At some point in the process the router stops and must be turned off and on before it will respond again either wirelessly or wired. I have tried the same experiment with both devices wired and the router works fine. I have tried changing the MTU, channel, beacon setting, etc. as other forum posts have tried. I tried reflashing the firmware, resetting to factory defaults and reconfiguring. So far no success. Cisco support wants me to return the router. Frankly I'm at the point of considering the former Linksys/Cisco products complete rubbish. I am going to have to buy a new router even if I return this one since I can't be without a router for any length of time.
View 8 Replies
View Related
Mar 3, 2012
I have a laptop (let me call it A) with Intel Centrino 1030-N wireless (iwlwifi module), running Arch Linux, and another laptop (I will call it B) with Atheros AR928X wireless (ath9k module), running Ubuntu 11.10. They connect to a wireless network provided by a D-Link DI-524 router (802.11g), which in turn connects to a DSL modem (10Mbps/1Mbps link)
Copying files between those machines, either through scp or mounting a share via NFS or Samba, is very slow (at most 200 KB/s) and sometimes fails (times out), even when both machines are inches away from the router. However, downloading files on either machine works correctly at the expected speeds (~1.2 MB/s).
I ran iperf, as recommended in a comment, and it gave me this: [code] The bandwidth is very low, as can be seen from those results.
View 1 Replies
View Related
Jan 21, 2011
I cannot upload files through http (e-mail attachments, send images to Facebook, send file to virustotal.com) with Linksys WRT600N router. When I remove connection cable from router and place directly in a computer, everything works just fine. I am using last firmware upgrade.
View 2 Replies
View Related
Dec 11, 2011
I'm just wondering how I would get a faster upload rate. Is it my modem? Is it my internet connection? At the moment my upload rate is
View 4 Replies
View Related
Apr 5, 2012
I ru n the speed test from my desktop and laptop and the download speed are in the same range in both pc's, around 20mb/s. However the upload speed is higher in the laptop (around 4 mb/s) compared the desktop (300 kb/s)My connection is supposed to run at 50 mb/s and 5mb/s?
View 9 Replies
View Related
Oct 27, 2011
I was wondering why my upload speed btw the test. and reading this forum post: Sudden slow upload speed?
View 1 Replies
View Related
Dec 9, 2011
About 2 months or so ago, my upload speed just pretty much stopped working. Nothing changed with my PC/modem/router, so I don't know what happened. My download speed is FINE, fast like it's always been(over 20 Mbps). I can upload a file maybe 500KB or lower, but it takes several minutes. If I try to upload anything bigger, it doesn't work(errors/gets stuck).
It's not my PC because I have the same problem on my tablet and ipod. It's not the router because I tested it by just hooking up the modem directly to my PC.
At speedtest.net, it just gets stuck on the upload test and never gives me results.
I rent my modem from Comcast. Should I just bring this modem in and get a new one?
View 7 Replies
View Related
Jun 27, 2012
This is the first PC I have ever built, but I built it with a buddy who is very experienced and everything went okay. The computer is maybe 3-4 weeks old now, everything is running fine, until today when I decided I wanted to try streaming some Diablo 3.This is when I discovered my upload speed was absolute garbage.I have verizon FIOS - I pay for 15/5, the download speed is always at 20+ mbps, I have never had any problems with it., but my upload speed is fluctuating between .34-1.5 mbps, changing every second.I know this is a problem with the computer because I brought in my old laptop, unplugged the ethernet from my new desktop, plugged it into the laptop in order to keep all variables the same, and it was getting 25/5 without any hesitation.When I was downloading the drivers for my mobo I installed something called Windows Firewall with Advanced Security(maybe that was with a windows update, im not sure).
Specs of my PC (if this matters)
-Asus P8Z77-V LK
-8g ddr3 Ripjaws
-i7 2700k
-Corsair H60
-EVGA GTX 670
-Crucial 128g M4 SSD
-Caviar Blue 1TB HDD
-750W OCZ Modular PSU
View 5 Replies
View Related
Dec 9, 2012
I bought comcast xfinity internet about a month ago, and I cannot get any upload speed. It's jammed up at about .40, and I'm paying for 3-4 mbs. My plan is 15/3, but the download speed is always over 20 mbs, while the upload is .40.
Comcast has been here twice with two new modems, and ran brand new cable under the house, because they said the signal was weak. Now it's strong, the modem is fine, and there is STILL no upload. I can barely upload pics to photobucket. Comcast basically told me there is nothing wrong on their end, and there is nothing they can do. The signal is strong, the modem is fine, the cabling is fine, and they are providing their service on their end.
[code]...
View 12 Replies
View Related
Aug 26, 2012
I uploaded an .avi media file, which filled 2.81GB and it took me 7 hours!I was like holy ***, how is it even possible for it to take so long time for an file that only fills 2.81GB?
View 4 Replies
View Related
Dec 1, 2011
How much faster is a T1 (1.5 Mbs) link vs. a 128Kbs link? Is it as simple as dividing one into the other which would equal roughly 11 times faster? What will this look like for the user who goes from 128K one day to a T!
View 1 Replies
View Related
Jun 28, 2012
After every attempt and changing of radios still download and upload was very slow.
View 1 Replies
View Related
Mar 9, 2013
I'm having a big trouble with my internet connection. The Upload speed is extremely slow after i got a new mainboard, that problem appears.[code] I'm tired with my suck internet connection! Upload a 1MB photo to Facebook took me hours..This problem has started for a week.
View 1 Replies
View Related
Jun 10, 2011
ISP is Comcast. The routers hardware version is A4 with firmware v.1.33NA. The upload speed used to be above 4Mbps but recently it has gone down to below 1Mbps. It comes back to above 4Mbps if the router is bypassed or the PC is directly connected to the modem.If I on/off power cycle the router, the speed comes back but only for short period. I tried a new DIR655 of hardware v.B1 with firmware v.2.00 but exact same problem was noticed. I tried my old spare router of Linksys WRT54G and no such problem was noticed.
View 10 Replies
View Related
Mar 20, 2011
I have connected my Netgear ReadyNAS storage to my laptops via a netgear unmanaged switch. I can access the NAS on one of the laptops via the network however on the other one I can only access it via the IP address and not via the network. Both laptops are Vista.
View 1 Replies
View Related
Jan 2, 2013
First discovered this problem because I was unable to connect to a particular web site that was functional according to a friend that I was talking to on the telephone while trying to connect.
Problem: Network UPLOAD speed is randomly reduced from 2Mb to 600Kb while download speed seems unaffected (Abt. 30 to 50Mb). First eliminated the router, modem and cables as suspects working with ISP tech support. CAT 5 cabling to router and cable modem. Then I discovered that another machine on the network did not have this problem. I then discovered that disabling the network and re-enabling the network cured the problem.....temporarily. Downloaded and installed latest NIC driver from MB web site. No solution. Downloaded and installed latest NIC driver from Realtek web site. No solution. Updated MB BIOS. No solution.
MB= Asus M5A97 EVO
CPU: AMD FX-4100
OS: MS Windows 7 Professional 64-bit SP1 (Latest updates)
RAM: 8.00 GB Dual-Channel DDR3 @ 802MHz (11-11-11-28
NIC on MB Realtek PCIe GBE
Disabled TCP/IPV6. No solution. I suspect it is one of the "Advanced" settings for the Realtek PCIe GBE, but I don't know what they do. Anytime I disable and re-enable the network adapter my upload speed returns to normal. I haven't been able to isolate a particular action that causes the slow-down. The attached pics show speed test, before and after disable - re-enable network adapter. Same server.
View 9 Replies
View Related
