Linksys Wireless Router :: Change Username / Password In Settings For EA4500?

Oct 25, 2012

How do I change the username password in the router settings for the linksys ea4500? It only lets me change the password, I cant find an option to change the username.

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: EA4500 - Admin Username / Password Versus SSID / WPA

May 18, 2012

The EA4500 web-settings application asks for a username and password.  The username is "admin" and the password is my long (60 character) wpa key.  I see where I can change the password but it says I'll lose all wireless connections.  This doesn't make sense to me.  I would think the router administration username and password are completely separate from the ssid and wpa key. This was the case with my earlier LinkSys router. I'd like a router administration username to be something other than the generic "admin" and a password that is easier than my long wpa key.  I want a separate ssid and wpa key (what I currently have).

View 2 Replies View Related

Routers / Switches :: Change CD-R King Wireless Router Username And Password?

Feb 6, 2012

i want to change my username and password of my router cw-5354 of cd-r king but the default user and password doesn't work anymore so i can't access the control panel.

View 3 Replies View Related

How To Get To Router Settings When Username / Password Unknown

Sep 18, 2012

I want to access my wireless router settings but i don't know my username or pass its my network however I can't access it. Is there a way to retrieve it?

View 19 Replies View Related

Buffalo Router WZR-600DHP - Change Username And Password?

Feb 12, 2013

I'm trying to change my username and password, but I don't know how. The manual is in Japanese, so I don't understand, what I need to do.

I have a wired router that seems to be on 192.168.1.1. When I installed the wireless router for the first time, I connected without cable, that may be the problem about the DHCP Server, but I don't know. Anyways, these IP don't work:

192.168.11.1
192.168.11.100

I don't get any access and therefore all my neighbors can use my connection right now. But the router itself works fine from the start.

View 3 Replies View Related

D-Link 2730u - Change The Username And Password For The Router?

Sep 27, 2012

i am using a D-Link 2730u, was trying to change the username and password for the router but it keeps saying that ACS URL is required, there is a place where i can put one but even after goggling it for a bit i didn't understand what should i put in there?

View 1 Replies View Related

Cisco WAN :: Forgot To Change Default Username And Password Of 1941 Router

May 23, 2013

i forgot to change the default username and password of 1941 router. I have alos performed WR memory on router. When i am trying to recover it through ROMMON mode  i am not getting the initial configuration Dialouge through which i can change the password . I have gone through all documents available through internet for recovering the same but unable to recover it. 

View 1 Replies View Related

Change My Username And Password?

Sep 11, 2012

i need to change my username and password

View 1 Replies View Related

Linksys Wireless Router :: EA3500 Change Admin Username?

Apr 17, 2012

how to change username admin to something different. I can reset the router password but there's no easily identifiable option for changing the username. 

View 5 Replies View Related

Change Username And Password - Netgear Extender?

Jan 22, 2013

How do I change the username and password on my home wi-fi extender (Netgear). I can't remember my original username and password and it will not let me use the extender until I put it in.

View 3 Replies View Related

Someone Is Stealing Wifi / How To Change Username And Password

Dec 17, 2011

I want change user name or password, some body stealing my connection.

View 2 Replies View Related

Linksys Wireless Router :: Can't Set Username And Password On WRT54GL

May 8, 2013

I have a problem with my linksys WRT54GL router.  I entered here [URL] and i set it up, i can connect to internet on my PC and wireless works great but i can't set wireless password and name. When i go to the wireless tab, i write the new name but when i hit seve setting i get disconnected from internet. I try to go to status and click on Connect tab, when is connected internet works but the name and the password of the wireless that i set earlier is reset to default. What do i have to do to set name and password and have internet at the same time.

View 7 Replies View Related

Linksys Wireless Router :: Username And Password For WRT120N?

Oct 16, 2012

I am trying to figure out my WEP code to use to connect to XBOX LIVE. To log on to my internet we just have a WPA-Personal I think, so I have been trying to sign into my router to hopefully obtain my WEP key there, but cannot sign in. I have tried every combination of usernames and passwords such as:

[none]              admin
admin             admin
[none]             [none]

n/a ... and more but nothing works.

View 1 Replies View Related

Linksys Wireless Router :: EA4500 Not Recognizing Static DNS Settings

Oct 15, 2012

I recently upgraded to the EA4500 and the only issue I'm having is that it will not recognize my static DNS settings, which worked fine on my older E2000.  No other hardware has changed except the router.I've tried both Google DNS and OpenDNS.  In either case, the DNS settings can be entered and saved in the Basic Settings tab, but when I go to the admin tab, it shows my ISP's deafult DNS.

View 4 Replies View Related

Cisco Routers :: SRP547 Enter Both IP Settings And Username / Password On WAN Configuration Page

Aug 22, 2011

I'm moving from an 1801W to an SRP547.My adsl supplier (BT) has given me a username and password, and also a router IP address, a subnet and an gateway IP address. I have 13 fixed IP addresses. I don't speak cisco, so I'm using the built in interface to configure it.If i choose IPoA I can enter the IP settings. If I choose PPPoA I can enter the username and password.I do not see anyway I can enter both the IP settings and the username + password on the WAN configuration page.

View 9 Replies View Related

Cisco WAN :: Unable To Change Username And Password On 2800?

Nov 29, 2011

I have tried to change the username and password using the following procedure but when I do so and reboot the router and try to login using the new userid and password it says Authentication failed. Complete these steps in order to recover your password:Shut down the router.Remove the compact flash that is at the back of the router.Power on the router.Once the Rommon1> prompt appears, enter this command:confreg 0x2142Insert the compact flash.Type reset.when you are prompted to enter the initial configuration, type No, and press Enter.At the Router> prompt, type enable.At the Router# prompt, enter the configure memory command, and press Enter in order to copy the startup configuration to the running configuration.Use the config t command in order to enter global configuration mode.Use this command in order to create a new user name and password:router(config)#username cisco privilege 15 password ciscoUse this command in order to change the boot statement:config-register x2102Use this command in order to save the configuration:write memoryReload the router, and then use the new user name and password to log in to the router.

View 16 Replies View Related

Linksys Wireless Router :: E1000 - Username / Password Required?

Jul 18, 2011

A username and password are being requested by http://192.168.1.1. The site says: "E1000"

View 1 Replies View Related

Linksys Wireless Router :: EA3500 Cannot Find Username And Password

Mar 18, 2013

I have tried using my router name and password when you 1st connect and got nothing.I have held the reset button for a minute straight to try and restore default settings and have got nothing. I'm trying to enter my ISP into the web browser

View 2 Replies View Related

Linksys Wireless Router :: EPC2425 - Lost Username And Password

Jul 1, 2012

I'm not a very knowledgeable person when it comes to networking stuff so ill try and explain this the best I can.I have a Cisco router the number on it is EPC2425.I set a user name and password I've long forgotten for access to the web based security protocols for the modem and if there was one I've lost the disk for the control protocol program.I need to get to the port forwarding a such on there and I have no way to a present.

View 4 Replies View Related

Linksys Wireless Router :: WRT160Nv2 / How To Check Password And Username

Jul 11, 2009

I am trying to access my Wireless router via 192.168.1.1  When it asks for username and password i did..

 Username: (BLANK)
Password: admin
 
But it didn't work, i think i may have changed the password at one time but im not sure. Is there anyway to check the password and username?

View 5 Replies View Related

Linksys Wireless Router :: WRT54G - Set Up Username And Password For VPN Connection

Dec 21, 2011

I would like to enable VPn in WRT54G.Cann't find where to set up user name & psw.Is client necessary to set up user name & psw if there was no need to set up user name & psw for in WRT54G ?

View 3 Replies View Related

Linksys Wireless Router :: Wrt54g - Forgot Username / Password?

Feb 17, 2012

I just dug my router (wrt54g) out of the closet and hooked it up but I cant remember my name or password for the router. Is there anything I can do that doesn't involve paying linksys any sort of "fee"

View 2 Replies View Related

Linksys Wireless Router :: EA4500 Can't Reconfigure Internet Settings In Cisco

Jun 28, 2012

I am using an EA4500 with the latest firmware that support the Cisco Connect Cloud. I am connected to the Internet and I need to edit the Internet settings and select a different internet setting: Static IP from the current setting DHCP. I select the option from a drop-down menu after selecting Edit, but there is no edit and no drop-down menu.

View 9 Replies View Related

Linksys Wireless Router :: EA4500 - Automatic Packet Site Settings?

Nov 19, 2012

I am curious as what the packet size should be set . is the bigger size == lower speed smaller == faster or just leave automatic setting for packet size?

View 4 Replies View Related

Linksys Wireless Router :: EA4500 Cannot Get Auto Connection Settings To Work

Apr 16, 2013

Purchased an EA4500 router.  I'm using an old HP 4L laserjet and have it connected to the router via the USB port.  I have 2 Mac's and installed vusb on both.  I can successfully print from both Mac's, however I have to manually disconnect and connect the printer in the vusb client.  I can't get the auto-connect and auto-disconnect settings to work by themselves.  Any guidance on the proper settings here?Additionally, do I need to configure the printer driver though the vusb client?  When I click "configure", I get an error saying"Cannot connect to Prolific Technology Inc.  IEEE-1284 Controller.

View 3 Replies View Related

Linksys Wireless Router :: WRT320n - How To Enter Automatically Username And Password

Apr 22, 2012

I use an internet network via wifi that require username and password. The router for wifi network in my place and i connect my cisco(linksys wrt320n) to the router. Every time i want to connect to internet i have to enter my username and password.I try to configure my cisco modem but there is no result. Is there any way or program to automatically enter the username and password?

View 3 Replies View Related

Linksys Wireless Router :: BEFW11S4 V3 Doesn't Recognise Username And Password

Sep 1, 2006

I get into the router ok, using no username and "admin" for password.I set up the key, hit OK, then when I hit "apply" the prompt comes up for the username and password again. I skip the username, enter "admin" for password (just like I did getting into the setup earlier) except now it says it doesn't recognize, or it's invalid, etc.

View 9 Replies View Related

Linksys Wireless Router :: WRT54GR - Can't Find Or Remember Username And Password

Jul 6, 2011

I successful set up my WRT54GR router. Now I want to add a new device but can't find or remember my user name and password. So I decided to reinstall the router only to find that  the http://192.168.1.1 page asks me for my admin password - having sensibly created one 4 years ago which I have now forgotten or  where I wrote it down. How the hell do I get around this - if at all or do I have to buy a new router and start all over again!

View 1 Replies View Related

Linksys Wireless Router :: EA4500 And Virgin Superhub Dual Band Settings

Sep 28, 2012

I have a Virgin Superhub at home which is capable of 2.4 OR 5GHz wireless. I have a mixture of 2.4 and 5 GHz tech at home so would like to use dual band. My wireless settings on my Superhub modem look like this.As you can see it has settings for 2.4 OR 5GHz and wireless modes of 54, 144 or 300Mbps.
 
What setting should I be using for my EA4500 to operate in dual band mode? I'm guessing I should put by Virgin Superhub modem in modem mode at 5GHz/300Mbps.I will besetting up seperate SSIDs for 2.4 and 5GHz bands.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G - Default Username And Password For Port Forwarding?

Jan 24, 2013

I have a WRT54G Linksys router and I am wondering what is the default username and password for port forwarding?

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - Lost Username And Password For Admin Page

Apr 30, 2007

I seem to have lost my username and password for the admin page for my WRT54G router.Is there a way to retrieve or reset the login?

View 9 Replies View Related

Linksys Wireless Router :: WRP400 To Upgrade Firmware Username / Password Required

Oct 25, 2012

I want to upgrade the firmware for the router wrp400 , i am asked Username & Password in order to update the firmware.I tried admin/admin does not work. I tried to reset the router, same thing, I have no ISP user and password.

View 1 Replies View Related

Linksys Wireless Router :: EA4500 - Error 2123 When Saving Media Prioritization Settings?

Mar 5, 2013

There are several features that don't work and are returning errors.  For starters, when trying to save settings for media/device prioritization I am receiving a 2123 error message.  Unable to save settings.  EA4500/N900 Router, Cisco Cloud Connect.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved