Buffalo Router WZR-600DHP - Change Username And Password?
Feb 12, 2013
I'm trying to change my username and password, but I don't know how. The manual is in Japanese, so I don't understand, what I need to do.
I have a wired router that seems to be on 192.168.1.1. When I installed the wireless router for the first time, I connected without cable, that may be the problem about the DHCP Server, but I don't know. Anyways, these IP don't work:
192.168.11.1
192.168.11.100
I don't get any access and therefore all my neighbors can use my connection right now. But the router itself works fine from the start.
View 3 Replies
ADVERTISEMENT
Feb 22, 2013
I just purchased a Buffalo WZR-600DHP router and have been having a weird issue. When using the router on the shipped DD-WRT firmware I consistently get "The default gateway is not available" error and I have to reset my wireless adapter on my laptop. This issue doesn't occur on my hardwired desktop or interestingly enough when the Buffalo router was switched to the "user-friendly" firmware the issue didn't occur either. Both times the router was on the DD-WRT firmware I've had the default gateway issue.
View 1 Replies
View Related
Sep 27, 2012
i am using a D-Link 2730u, was trying to change the username and password for the router but it keeps saying that ACS URL is required, there is a place where i can put one but even after goggling it for a bit i didn't understand what should i put in there?
View 1 Replies
View Related
Feb 6, 2012
i want to change my username and password of my router cw-5354 of cd-r king but the default user and password doesn't work anymore so i can't access the control panel.
View 3 Replies
View Related
Oct 25, 2012
How do I change the username password in the router settings for the linksys ea4500? It only lets me change the password, I cant find an option to change the username.
View 3 Replies
View Related
May 23, 2013
i forgot to change the default username and password of 1941 router. I have alos performed WR memory on router. When i am trying to recover it through ROMMON mode i am not getting the initial configuration Dialouge through which i can change the password . I have gone through all documents available through internet for recovering the same but unable to recover it.
View 1 Replies
View Related
Sep 11, 2012
i need to change my username and password
View 1 Replies
View Related
Jan 22, 2013
How do I change the username and password on my home wi-fi extender (Netgear). I can't remember my original username and password and it will not let me use the extender until I put it in.
View 3 Replies
View Related
Dec 17, 2011
I want change user name or password, some body stealing my connection.
View 2 Replies
View Related
Nov 29, 2011
I have tried to change the username and password using the following procedure but when I do so and reboot the router and try to login using the new userid and password it says Authentication failed. Complete these steps in order to recover your password:Shut down the router.Remove the compact flash that is at the back of the router.Power on the router.Once the Rommon1> prompt appears, enter this command:confreg 0x2142Insert the compact flash.Type reset.when you are prompted to enter the initial configuration, type No, and press Enter.At the Router> prompt, type enable.At the Router# prompt, enter the configure memory command, and press Enter in order to copy the startup configuration to the running configuration.Use the config t command in order to enter global configuration mode.Use this command in order to create a new user name and password:router(config)#username cisco privilege 15 password ciscoUse this command in order to change the boot statement:config-register x2102Use this command in order to save the configuration:write memoryReload the router, and then use the new user name and password to log in to the router.
View 16 Replies
View Related
Jul 29, 2011
I have set wifi password. but i can't see what the password is.
View 2 Replies
View Related
Feb 25, 2013
What is my dsl router username & password
View 1 Replies
View Related
Nov 11, 2012
how can i get the username and password of my dsl router
View 1 Replies
View Related
Apr 17, 2012
how to change username admin to something different. I can reset the router password but there's no easily identifiable option for changing the username.
View 5 Replies
View Related
Mar 25, 2012
Cannot find username or password for router CBV710
View 1 Replies
View Related
Sep 18, 2012
I want to access my wireless router settings but i don't know my username or pass its my network however I can't access it. Is there a way to retrieve it?
View 19 Replies
View Related
May 8, 2013
I have a problem with my linksys WRT54GL router. I entered here [URL] and i set it up, i can connect to internet on my PC and wireless works great but i can't set wireless password and name. When i go to the wireless tab, i write the new name but when i hit seve setting i get disconnected from internet. I try to go to status and click on Connect tab, when is connected internet works but the name and the password of the wireless that i set earlier is reset to default. What do i have to do to set name and password and have internet at the same time.
View 7 Replies
View Related
Oct 16, 2012
I am trying to figure out my WEP code to use to connect to XBOX LIVE. To log on to my internet we just have a WPA-Personal I think, so I have been trying to sign into my router to hopefully obtain my WEP key there, but cannot sign in. I have tried every combination of usernames and passwords such as:
[none] admin
admin admin
[none] [none]
n/a ... and more but nothing works.
View 1 Replies
View Related
Jul 18, 2011
A username and password are being requested by http://192.168.1.1. The site says: "E1000"
View 1 Replies
View Related
Mar 18, 2013
I have tried using my router name and password when you 1st connect and got nothing.I have held the reset button for a minute straight to try and restore default settings and have got nothing. I'm trying to enter my ISP into the web browser
View 2 Replies
View Related
Jul 1, 2012
I'm not a very knowledgeable person when it comes to networking stuff so ill try and explain this the best I can.I have a Cisco router the number on it is EPC2425.I set a user name and password I've long forgotten for access to the web based security protocols for the modem and if there was one I've lost the disk for the control protocol program.I need to get to the port forwarding a such on there and I have no way to a present.
View 4 Replies
View Related
Jul 11, 2009
I am trying to access my Wireless router via 192.168.1.1 When it asks for username and password i did..
Username: (BLANK)
Password: admin
But it didn't work, i think i may have changed the password at one time but im not sure. Is there anyway to check the password and username?
View 5 Replies
View Related
Dec 21, 2011
I would like to enable VPn in WRT54G.Cann't find where to set up user name & psw.Is client necessary to set up user name & psw if there was no need to set up user name & psw for in WRT54G ?
View 3 Replies
View Related
Feb 17, 2012
I just dug my router (wrt54g) out of the closet and hooked it up but I cant remember my name or password for the router. Is there anything I can do that doesn't involve paying linksys any sort of "fee"
View 2 Replies
View Related
Apr 22, 2012
I use an internet network via wifi that require username and password. The router for wifi network in my place and i connect my cisco(linksys wrt320n) to the router. Every time i want to connect to internet i have to enter my username and password.I try to configure my cisco modem but there is no result. Is there any way or program to automatically enter the username and password?
View 3 Replies
View Related
Sep 1, 2006
I get into the router ok, using no username and "admin" for password.I set up the key, hit OK, then when I hit "apply" the prompt comes up for the username and password again. I skip the username, enter "admin" for password (just like I did getting into the setup earlier) except now it says it doesn't recognize, or it's invalid, etc.
View 9 Replies
View Related
Jan 20, 2009
how do i recover username and password for 870 series router
View 5 Replies
View Related
Jul 6, 2011
I successful set up my WRT54GR router. Now I want to add a new device but can't find or remember my user name and password. So I decided to reinstall the router only to find that the http://192.168.1.1 page asks me for my admin password - having sensibly created one 4 years ago which I have now forgotten or where I wrote it down. How the hell do I get around this - if at all or do I have to buy a new router and start all over again!
View 1 Replies
View Related
Jan 24, 2013
I have a WRT54G Linksys router and I am wondering what is the default username and password for port forwarding?
View 1 Replies
View Related
Apr 30, 2007
I seem to have lost my username and password for the admin page for my WRT54G router.Is there a way to retrieve or reset the login?
View 9 Replies
View Related
May 18, 2012
The EA4500 web-settings application asks for a username and password. The username is "admin" and the password is my long (60 character) wpa key. I see where I can change the password but it says I'll lose all wireless connections. This doesn't make sense to me. I would think the router administration username and password are completely separate from the ssid and wpa key. This was the case with my earlier LinkSys router. I'd like a router administration username to be something other than the generic "admin" and a password that is easier than my long wpa key. I want a separate ssid and wpa key (what I currently have).
View 2 Replies
View Related
Oct 25, 2012
I want to upgrade the firmware for the router wrp400 , i am asked Username & Password in order to update the firmware.I tried admin/admin does not work. I tried to reset the router, same thing, I have no ISP user and password.
View 1 Replies
View Related
Feb 23, 2013
Blank user name and admin in password doesn't work. How to reset these ?
View 1 Replies
View Related
