Linksys Wireless Router :: EA4500 - Automatic Packet Site Settings?
Nov 19, 2012I am curious as what the packet size should be set . is the bigger size == lower speed smaller == faster or just leave automatic setting for packet size?
View 4 Replies
ADVERTISEMENT
Linksys Wireless Router :: Packet Degradation With EA4500?
Dec 19, 2012I am bridging my NetComm router to the Linksys EA4500 and it is giving me only 8MBps whereas the line speed is 14MBps. I have tried to connect directly to the netcomm by disabling the EA4500 and I am getting 14MBps. Any way to increase my speed?
View 3 Replies View RelatedLinksys Wireless Router :: EA4500 Not Recognizing Static DNS Settings
Oct 15, 2012I recently upgraded to the EA4500 and the only issue I'm having is that it will not recognize my static DNS settings, which worked fine on my older E2000. No other hardware has changed except the router.I've tried both Google DNS and OpenDNS. In either case, the DNS settings can be entered and saved in the Basic Settings tab, but when I go to the admin tab, it shows my ISP's deafult DNS.
View 4 Replies View RelatedLinksys Wireless Router :: EA4500 Can't Reconfigure Internet Settings In Cisco
Jun 28, 2012I am using an EA4500 with the latest firmware that support the Cisco Connect Cloud. I am connected to the Internet and I need to edit the Internet settings and select a different internet setting: Static IP from the current setting DHCP. I select the option from a drop-down menu after selecting Edit, but there is no edit and no drop-down menu.
View 9 Replies View RelatedLinksys Wireless Router :: Change Username / Password In Settings For EA4500?
Oct 25, 2012How do I change the username password in the router settings for the linksys ea4500? It only lets me change the password, I cant find an option to change the username.
View 3 Replies View RelatedLinksys Wireless Router :: EA4500 Cannot Get Auto Connection Settings To Work
Apr 16, 2013Purchased an EA4500 router. I'm using an old HP 4L laserjet and have it connected to the router via the USB port. I have 2 Mac's and installed vusb on both. I can successfully print from both Mac's, however I have to manually disconnect and connect the printer in the vusb client. I can't get the auto-connect and auto-disconnect settings to work by themselves. Any guidance on the proper settings here?Additionally, do I need to configure the printer driver though the vusb client? When I click "configure", I get an error saying"Cannot connect to Prolific Technology Inc. IEEE-1284 Controller.
View 3 Replies View RelatedLinksys Wireless Router :: EA4500 And Virgin Superhub Dual Band Settings
Sep 28, 2012I have a Virgin Superhub at home which is capable of 2.4 OR 5GHz wireless. I have a mixture of 2.4 and 5 GHz tech at home so would like to use dual band. My wireless settings on my Superhub modem look like this.As you can see it has settings for 2.4 OR 5GHz and wireless modes of 54, 144 or 300Mbps.
What setting should I be using for my EA4500 to operate in dual band mode? I'm guessing I should put by Virgin Superhub modem in modem mode at 5GHz/300Mbps.I will besetting up seperate SSIDs for 2.4 and 5GHz bands.
Linksys Wireless Router :: EA4500 - Error 2123 When Saving Media Prioritization Settings?
Mar 5, 2013There are several features that don't work and are returning errors. For starters, when trying to save settings for media/device prioritization I am receiving a 2123 error message. Unable to save settings. EA4500/N900 Router, Cisco Cloud Connect.
View 3 Replies View RelatedLinksys Wireless Router :: EA4500 - Block Specific Site Based On Keywords In Webpage Address?
Apr 2, 2013I have an EA4500. I am trying to block a specific site based on keywords in the webpage address. how to get the EA4500 to block sites with based on keywords.
View 1 Replies View RelatedD-Link DIR-655 :: Channel Width - Automatic Settings 20 / 40 MHZ?
Dec 28, 2011Is there a "best" channel to use for the router -- e.g. the one that would provide maximum range? I live in a fairly large home and the connection deteriorates in some rooms (not lost altogether, but weaker). Also, what is "channel width"? It's set to 20MHZ, but there is also a setting for Automatic 20/40MHZ. What's the adv advantage of one setting over the other?
View 9 Replies View RelatedInternet Not Connecting - Automatic Detect Settings Unchecked
Mar 27, 2012I open the IE, it takes about 3 minutes to open up.Its says at the bottom left corner "detecting proxy settings". I went to Tools>Internet Options>Connections Tab>LAN settings> and unchecked Automatically detect settings, but still did not work.
View 3 Replies View RelatedSharing :: Printers Switching Default Settings Automatic?
Mar 17, 2011First time on this forum: I have a client running a Windows 2008 server, Windows 7 OS. We set the default printer as the server file cabinet printer, however, between logging off in the evening and back on in the morning the default printer switches to his local printer
View 2 Replies View RelatedCisco Routers :: WRVS4400N - Automatic Revert To Factory Default Settings?
Jan 23, 2013I had something strange happen to my WRVS440N router yesterday. Our network had crashed for some reason. So I attempted to log into the device to see what was wrong and I was surprised to discover that all of the settings including user name and password had reverted back to factory default.
1. What are all of the possible scenarios that would cause this to happen?
2.Would disconnecting power in the middle of a boot up sequence cause the router to revert to factory settings?
Cisco VPN :: 5500 - Site To Site VPN Packet Decryption Count 0
Feb 2, 2013I have issue with ipsec vpn between Cisco 1841 & Cisco asa5500, packets are getting encrypt on both end but both end the decrypt count is 0.
View 7 Replies View RelatedLinksys Wireless Router :: WRT54GS - PPPoE Automatic Login?
Aug 2, 2011I have a WRT54GS wireless router. I can successfully set up the router with my DSL modem for PPPoE. Here's my problem. The router configuration requires you to put in the userID and password, then logs you in to your ISP automatically. I DON'T want it to do that. Is there any way to configure for PPPoE where ISP login is controlled manually; i.e., when the user tries to connect to a web page, a dialog pops up for entering the password?
View 1 Replies View RelatedLinksys Wireless Router :: WRT320N Automatic Channel Selection?
Apr 18, 2010I am working with a WRT320N for some weeks now, but I don't get the fact that 40Mhz channel width is only allowed for Automatic channel selection.I keep losing connection and the channel keeps changing.I want an option to change the channel manually (like in every good WLAN router!!), also with N data rate (40Mhz channel width).I know how to select the best channel, so why aren't I able to change it the way I like it?
View 4 Replies View RelatedLinksys Wireless Router :: EA3500 IPV6 Tunnel Resets To Automatic
Jan 27, 2013I have to go back into settings and deactivate the IPV6 tunnel daily to keep access to youtube. My provider does not support IPV6. Saving changes has no effectIs there a way to ensure that the IPV6 tunnel remains deactivated?I have firmware version 1.0.30 build 126544 2011-12-24. Firmware update function says I got the latest version.
View 5 Replies View RelatedLinksys Wireless Router :: WRT100 - How To Disable Automatic DNS Name Service Configure
Dec 9, 2011I have a WRT100 wireless router, which is configured for a PPPOE connection to my ISP. After running one of the tools to determine responsiveness of DNS name services, I would like to manually configure my DNS services, placing a more responsive service as my first DNS choice. In the router administration, I can configure three static DNS IP's. However, I don't see any place in the configuration to turn off the automatic DNS configuration from my ISP. So, when I issue an IPCONFIG /ALL on my computer, the DNS listing shows two DNS Name Services from my ISP ahead of the three static DNS IP's that I configured.
View 3 Replies View RelatedLinksys Wireless Router :: WRT160NL / Automatic Spin-down Of External USB Hard Drive
Mar 21, 2012do external hard disks automatically spin down after a period with no access/use when connected with the USB port of the WRT160NL?
View 1 Replies View RelatedLinksys Wireless Router :: E4200 - Running In Bridge Mode /Automatic DHCP?
Dec 9, 2012I am trying to determine the best way to setup my E4200 V2 so that it is “uplinked” correctly to a Comcast Dory Modem/router. Currently we have the E4200 V2 router plugged into the Comcast Dory Modem/Router using a CAT6 cable from one of the Ethernet ports on the Comcast device to the WAN port on the E4200. The E4200 is set to “Automatic Configuration - DHCP.”
We are trying to do two things. First better WIFI in the center of the house and for a TV located next to the Comcast device, and second, have all devices in this house see and access all other devices including the Samsung SmartTV, my son’s two systems upstairs, the 3 systems in the room with the E4200, and the one network printer. In the room with the E4200 we have 3 computers and one network printer. 3 of those 4 devices support WIFI so we don’t have to use all 4 Ethernet ports on the E4200.
I see others talking about running the CAT6 cable to an Ethernet port on the E4200 instead of the WAN port and setting it to “Bridge Mode.” Right now the system appears to be working fine although we are sometimes experiencing brief dropped connections with the devices hardwired into the E4200.
Should I be running the E4200 in “Bridge” mode or “Automatic DHCP” mode and which port on E4200 should the CAT6 from Comcast be plugged into?
Linksys Wireless Router :: WRVS4400N Site To Site VPN Drops After Time?
Mar 6, 2008I have a new WRVS4400N configured with a site to site VPN to connect to my office. At the office, we're running a Cisco PIX 515E. I have successfully established an IKE preshared key and the tunnel is listed as Up. I can successfully connect through the VPN tunnel into the office network through the tunnel and all seems good. After some period of time, the tunnel apparently goes into a bad state. Access to the office network is no longer available. When looking at the VPN status screen, the Linksys indicates that the tunnel is up. However, I cannot ping any resources on the office lan. If I disconnect and connect the site to site VPN tunnel, it connects and comes back up successfully. It seems like there is some sort of timeout taking place here. I am running the 1.1.03 firmware.
View 7 Replies View RelatedLinksys Wireless Router :: E4200 V2 Packet Loss?
Jan 18, 2012I seem to be having packet loss with the E4200V2 which is upgraded to the latest firmware as of today, 1/18/12
The application is accessing a security DVR which uses a RTSP / RTP stream. Of course this requires certian ports to be forwarded in order for this to work. This works flawlessly with a WRT310N or a Cisco 871 Router so I know the port forwarding is correct.
With the E4200V2 it works intermittently, I can replace EV4200V2 with either the Cisco 871 or the WRT310N and there are no issues.
Linksys Wired Router :: Site To Site Between Two RV042 With Static IP At Both
May 7, 2012I am trying to set up a Site to Site between two RV042 with static IP at both routers.at the log at site 1 i get: packet from XX.XXX.XX.167:5: initial Main Mode message received on 10.2.32.1:500 but no connection has been authorized with policy=PSK.At site 2 i get: packet from xxx.xxx.xxx.146:500: initial Main Mode message received on 192.168.1.1:500 but no connection has been authorized with policy=PSK.I have tuned off the firewall and added a Port forwarding to the router ip and port 500.Tried with different autentication methods, but get the same message.
View 1 Replies View RelatedCisco VPN :: Create A Site To Site VPN Using 2901 And Linksys Router?
Mar 28, 2012I am trying to create a site to site VPN using a cisco 2901 and Linksys router.I have the VPN configured and connected and I can ping gateway to gateway. However, from the Cisco I can't ping any of the devices beyond the gateway.Example, from the cisco I can ping 192.168.5.254 (gateway IP address) source gig 0/1 and it works great.
However if I ping from the cisco 192.168.5.50 (end user PC) source gig 0/1 it doesn't work.I have created a client VPN and that works perfectly.Below is my config.
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
!
crypto isakmp policy 2
[code]....
Linksys Wireless Router :: E2000 Packet Loss (cabled)?
Mar 9, 2011A while ago I bought a WRT320N as a trade-in offer, unfortunately I had around 20% packet loss on my connection after I set it up. If running directly through my cable modem I had no connection issues at all.I was running the whole setup cabled, and have no peripherals using the wireless connection.The router was returned to the retailer for RMA, and in the end I got the purchase credited.My setup ISP: Dansk Kabel TV (danish provider for internet, TV etc.)Modem: Netgear CVD31T DOCSIS 3.0 compliant Cablemodem (I do not have access to the modem, as it is provided by the ISP. I have now bought an E2000, and set it up in the same manner as the previous router.This has returned the same problems I had with my previous router.Updating the firmware didn't make any difference.Using Pingtest.net as my test reference I get results like this.when connected directly to the modem I get 0% packet loss, max 20ms ping and jitter is 2-3ms.Have I been so unlucky to get 2 faulty routers in a row, or could there be some problems with Linksys routers and Netgear?I have unsuccessfully tried switching cables without any change, tried moving the router "far" away from the modem, monitors etc to see if there could be any interference from the wireless.
View 2 Replies View RelatedLinksys Wireless Router :: Set Up EA4500 Without A Computer?
Sep 2, 2012I've looked all over the internet for this and can't find a definate answer. Waited for live chat and got kicked before I got to talk to someone... Just sold my computer and the plan was to buy a newer mac but we've been getting along fine without a computer with just using our iphones. So my question, I see that Cisco has the Connect Express app for the iphone, and I've read about all the features it has like changing settings, router features, etc. But I can't find anything on using the app for the initial set up of the router. I'm currently on an older linksys router (set up before we sold the computer) but it's time for a needed upgrade.
View 3 Replies View RelatedLinksys Wireless Router :: Using An External HDD For EA4500?
Apr 30, 2012I got my ea4500 all set up. never had a media servor or anything like that, figured this would be an easier way. when i hook up my exteral i can find it but i can only view the files in windows media player. how can i just browse the folders manually? WMP doesnt let me browse the folders as they actually are on the HDD which is such a pain in the **bleep**.
shows a device in "network infrastructure" but it says problem sending command to the program when i click that. i dont want to have to view the HDD in WMP as a media device...
Linksys Wireless Router :: EA4500 Won't Obtain IP From ISP
May 12, 2012My new EA4500 (fw ver 2.0.36) won't obtain an IP from a Brighthouse TM502G cable modem. The EA4500 replaced a functioning WRT54G which would obtain an IP from the ISP. I've tried upgrading firmware and have used both straight-through and crossover cables between the EA4500 & TM502G to no avail. The EA4500 would issue IPs to it's clients, but not obtain one from it's TM502G. At the moment, all 3 are daisy-chained together with the old WRT54G in the middle in order to make the EA4500 work. Both WiFi and LAN ports function in this configuration.
View 1 Replies View RelatedLinksys Wireless Router :: EA4500 Only Uses 2.4 Ghz Channel?
Dec 19, 2012I downloaded and installed inSSider for Windows and, under the 2.4 Ghz tab, I can clearly see the Router SSID, on Channel 6, exactly as configuredbin the Router. However on the 5 Ghz tab, nothing? I can see Channels 36, 40, 44, 48, 52 and so on BUT no trace of any wireless signal here?I carefully reviewed the wireless settings options and it is indeed enabled.
View 1 Replies View RelatedLinksys Wireless Router :: Connecting EA4500 To Another One?
Feb 4, 2013Connect my primary router EA4500 to another EA4500?
I tried and followed the steps provided here but it doesn't work at all for the Xth time already.
The first router installed and ran flawlessly in minutes. The second one has failed to work in bridge mode for 3 hours now.
Linksys Wireless Router :: Get Forum For Just EA4500?
May 20, 2012Can we get a forum title just for the EA4500?
View 1 Replies View RelatedLinksys Wireless Router :: How To Use EA4500 As A Bridge
May 15, 2013In my apartment, I can receive the wireless signal of free scholl wireless, which is accessable without user name and password. Although the signal is not good, but we used to use a router EA3000 to relay the signal. Now my roommate is leaving with this this router. So I bought EA4500 and try to do the similar job. However, I find that the configurations on 192.168.1.1 are different between EA3000 and EA4500. Many options cannot be found in the EA4500 page, such as the wireless client.
View 4 Replies View RelatedLinksys Wireless Router :: Can't Find EA4500 At 25%
Apr 23, 2013I recently got an EA4500 from a friend and when I tried to run the Cisco Connect CD on my MacBook it gets to 25% and then stops and says it can't find a router. I've reset, powercycled, unplugged, plugged, searched, and searched but I cant seem to get it to find the router.
View 3 Replies View Related