Linksys Wired Router :: Site To Site Between Two RV042 With Static IP At Both

May 7, 2012

I am trying to set up a Site to Site between two RV042 with static IP at both routers.at the log at site 1 i get: packet from XX.XXX.XX.167:5: initial Main Mode message received on 10.2.32.1:500 but no connection has been authorized with policy=PSK.At site 2 i get: packet from xxx.xxx.xxx.146:500: initial Main Mode message received on 192.168.1.1:500 but no connection has been authorized with policy=PSK.I have tuned off the firewall and added a Port forwarding to the router ip and port 500.Tried with different autentication methods, but get the same message.

View 1 Replies


ADVERTISEMENT

Cisco VPN :: Site-2-Site VPN Between 850 And Linksys RV042 Is Up

Nov 8, 2012

My problem is VPN Site2Site between Cisco and Linksys routers: after a troubles vpn tunnel now seems up but no data is passed accross tunnel.This is configuration of Linksys RV042 (Firmware Version: 1.3.12.6-tm, seems last for this hardware [code]

View 1 Replies View Related

Cisco VPN :: Site-to-Site VPN Between RV042 And 1941 Router?

Jul 6, 2012

how to configure a site-to-site VPN between RV042 router and 1941 router?

View 0 Replies View Related

Cisco Routers :: Site-to-Site VPN - Configure It Between RV042 And 2911

Dec 29, 2012

Is there a way to set up a Site-to-site VPN between RV042 & Cisco 2911? I "googled" this and obtained a document, but it is not regarding Cisco 2911: [URL]
 
Routers are needed to setup it successfully. I have tried on both routers several configuration steps, no success...

View 3 Replies View Related

Cisco Routers :: RV042 - Site To Site VPN And Behind Juniper Firewall

Mar 25, 2013

I have no problem configuring both devices to successfully connect when the juniper firewall isn't in the picture.  But due to policy; the RV042 at our main site must sit behind the firewall.
 
I've got the port forwarding setup but I'm not able to connect.  I know I"m missing some configuration on the RV042 but I can't think of it! I've attached a GIF to give an example of both setups.

View 3 Replies View Related

Cisco Routers :: Site-to-site VPN From SRP527W (dynamic IP) To ASA 5505 (Static)

Sep 6, 2011

I have an ASA5505 running which is on a static IP. I have just got an SRP527W for a remote worker and want to create a site-to-site VPN into the ASA. I have a number of other router of non-cisco brand which just all dial-in and connect no problem.
 
On other routers I have been abloe to specify the DDNS hostname in the VPN setup so that the ASA can identify it. I'm not sure how I setup the SRP527 to connect to the ASA.

View 3 Replies View Related

Cisco Routers :: Site-to-Site VPN Configuration Between Two RV042

Apr 23, 2013

I have got two CISCO RV042 .I need to configure a site to site VPN .

View 1 Replies View Related

Cisco VPN :: Can't Establish Site-to-site VPN Between RV042 And RV220W

Sep 3, 2012

I'm trying to establish a site to site VPN using ipsec between an RV220W in the UK and an RV042 in Italy to no avail.The RV042 tells me it's "waiting for a connection" and it gives 0.0.0.0 as the remote address (i'm using Dynamic addressing at both ends). I can ping the remote address with a response.The basic parameters I'm using is 3DES with SHA1, but the RV042 offers an option for Perfect Forward Secrecy which the RV220W does not (I've tried toggling this) and the RV220W offers and Extended Authentication mode which I can't see on the RV042.

View 2 Replies View Related

Cisco Routers :: RV042 Site To Site VPN With Dynamic IP?

Nov 28, 2012

I recently bought two RV042s to create a site to site VPN for a client.  I have several of these setups installed at other locations but this is the first version 3 hardware I've used.It seems like the dynamic IP functionality of the VPN setup may not be working correctly.  I've verified all settings on each router match and have deleted/recreated the setup several times just to make sure.  Here's the logs from the router with a static IP.
 
Nov 29 06:49:51 2012 VPN Log (g2gips0): deleting connection 
Nov 29 06:49:51 2012 VPN Log added connection description (g2gips0) 
Nov 29 06:49:51 2012 VPN Log listening for IKE messages 
Nov 29 06:49:51 2012 VPN Log forgetting secrets 
Nov 29 06:49:51 2012 VPN Log loading secrets from '/etc/ipsec.d/ipsec.secrets' 
Nov 29 06:49:51 2012 VPN Log (g2gips0): cannot initiate connection without knowing peer IP address 
Nov 29 06:49:51 2012 VPN Log (g2gips0): cannot initiate connection without knowing peer IP address 
 
I've tried both dynamic IP + email and dynamic IP + FQDN to authenticate the router using the dynamic IP and both give the same error as above.I did a firmware update hoping to fix PPPoE which seemed to be broken with a Netopia modem in bridge mode so both routers are on the latest firmware, v4.2.1.02. 

View 18 Replies View Related

Cisco Routers :: WRVS4400N Site-to-site VPN With RV042?

Oct 15, 2012

May I know can the 2 models WRVS4400N and RV042 perform site-to-site vpn with each other?

View 1 Replies View Related

Cisco VPN :: RV042 / ASA 5510 - Site To Site VPN Configuration

Mar 7, 2013

I configured every thing in both site, there is a connection between my sites BUT I can't access my resources from Site B with it has RV042. It also shows that it connected to my ASA in Site A  but there is no traffic between sites !!! I don't know what should I do now ?

View 2 Replies View Related

Cisco Routers :: RV042 - Site To Site VPN Speeds

Jan 24, 2013

I have an RV042 connected to another RV042 via site-to-site VPN.  The tunnel has been solid for months, but when I did an actual read/write test between PCs at either endpoint, the speeds were quite slow.

Endpoint A has a line speed of 25/5.
Endpoint B has a line speed of 50/7-ish.
 
Read/write test from A to B was about ~3 write and ~7 read. Does this sound normal for these routers?  I was hoping for better performance than that.

View 1 Replies View Related

Cisco Routers :: RV180W Site To Site VPN Static On One End Dynamic

Mar 22, 2013

I am having a heck of a time configuring 2 RV180W's to establish an IPSEC VPN tunnel.  I have some experience at this with other Cisco products (RV042/082) but I can't get these beasties to cooperate.One RV180W is at a client's office and there are to be 1x RV180W and 1x RV120W located at 2 employee's residences.The office has a Static IP and the homes have dymamic IP.I figured I would config the units in the homes to be initators and connect to the office where the static IP is.  This is failing for me so far. Any example (screenshot?) of a config where this is working?  The firmware on the RV180W's I am trying to configure first are current.I even tried testing from my office (where I have multiple static IPs available) from RV180W here to RV180W at client's office (static at both ends) and I can't get a tunnel to come up.  Obviously I am missing the boat at some point in the setup.

View 1 Replies View Related

Cisco VPN :: ASA 5505 / Static Routes Through Site-to-site Tunnel

Dec 17, 2012

I am using a Cisco ASA 5505 Here is a description of my topology.
 
Headquarters = 192.168.201.0
Client X = 172.16.0.0
Datacenter = 10.12.0.0
 Site to Site Tunnels:
Headquarters ---> Datacenter
Datacenter ---> Client X
 
I want to ability for computers in the Headquarters subnet to access the Client X subnet.I have tried setting up a static route to push all traffic destin for 172.16.0.0 to the datacenter, but was unsuccessful. how I can route all 172.16.0.0 through the tunnel.I have tried ading a static route on my ASA but without success.

View 3 Replies View Related

Cisco VPN :: ASA 5505 / Dynamic-to-Static Site To Site VPN?

Nov 7, 2012

I have some sites already connected with ASA 5505 site to site VPN with both end static IP.  Normally, all traffic can come across without any problem.  Even I used "management-access inside" for both ASA.Now I have a new office with only ADSL pppoe connection.  I used easy VPN to connect from Site B:remote dynamic IP site to SiteA:static IP with similar example of this: [URL]

All my 5505 ASA are running 8.4(4)1
Site A - Static IP
Site B - dynamic IP with pppoe connection.
 
After EasyVPN connected, i do not know how do I remote manangment from site A lan to site B 5505 ASA?

View 6 Replies View Related

Cisco VPN :: Site-to-site Between ASA 5510 With Static IP And Dlink

Jul 17, 2012

I'm trying to set up a site to site VPN link between the ASA5510 that we use exclusively as a VPN endpoint on campus and a D-Link DIR130 VPN Router off campus, at a local business with a dynamically assigned IP.  We currently use the ASA for remote access users who use the Cisco VPN client on mobile devices, as well as for a single site to site link to our telecom provider for the purposes of monitoring telecom equipment remotely.We are looking for a way to cheaply deploy secure VPN connections to local businesses to allow them to use point of sale devices which connect back to systems on campus, so students can use their meal cards at local restaurants, similarly to how they use them at the on-campus cafeteria.
 
I have experience configuring Cisco switches, APs and routers, but this ASA device absolutely baffles me.  I've futzed around with the ASDM 6.4 gui config and tried to match up configurations between the DIR130 and the ASA, but I can never get a VPN connection to come up. 

View 32 Replies View Related

Cisco VPN :: 5505 Site-to-Site VPN With Static Nat

Jul 26, 2012

I need to set up a site to site vpn between 2 ASA (1 5510 and a 5505).  The 5505 internal network is also in use on the internal portion of the 5510 so I wanted to NAT the outbound traffic from Site A (5510) to Site B (5505) and vice versa.  I was thinking of doing something along these lines:To allow the traffic to flow through the tunnel when having the same addressing scheme on both ends, you should NAT the VPN traffic. [code] And then I would use the "crypto" acl for building the crypto map. 

View 4 Replies View Related

Linksys Wired Router :: Static Route On RV042?

Apr 10, 2011

static route on RV042? 

View 1 Replies View Related

Linksys Wireless Router :: WRVS4400N Site To Site VPN Drops After Time?

Mar 6, 2008

I have a new WRVS4400N configured with a site to site VPN to connect to my office.  At the office, we're running a Cisco PIX 515E.  I have successfully established an IKE preshared key and the tunnel is listed as Up.  I can successfully connect through the VPN tunnel into the office network through the tunnel and all seems good.  After some period of time, the tunnel apparently goes into a bad state.  Access to the office network is no longer available.  When looking at the VPN status screen, the Linksys indicates that the tunnel is up.  However, I cannot ping any resources on the office lan.  If I disconnect and connect the site to site VPN tunnel, it connects and comes back up successfully.  It seems like there is some sort of timeout taking place here.  I am running the 1.1.03 firmware.

View 7 Replies View Related

Cisco VPN :: Create A Site To Site VPN Using 2901 And Linksys Router?

Mar 28, 2012

I am trying to create a site to site VPN using a cisco 2901 and Linksys router.I have the VPN configured and connected and I can ping gateway to gateway. However, from the Cisco I can't ping any of the devices beyond the gateway.Example, from the cisco I can ping 192.168.5.254 (gateway IP address) source gig 0/1 and it works great.
 
However if I ping from the cisco 192.168.5.50 (end user PC) source gig 0/1 it doesn't work.I have created a client VPN and that works perfectly.Below is my config.

crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
!
crypto isakmp policy 2

[code]....

View 1 Replies View Related

Linksys Wired Router :: Static Route To Access TMG Internal Network Through RV042 Pptp Server?

Mar 20, 2012

Currently i am having a scenario where i have setup RV042 and which is connected to Microsoft Forefront 2010. PPTP works fine only on rv042 subnet but i am not able to access the "internal" network of TMG.RV042 (172.16.1.1) ---> TMG [external] (172.16.1.2) ---> TMG [internal] (192.168.1.1) Is there any way through static route to access the TMG internal network through RV042 pptp server?

View 1 Replies View Related

Cisco VPN :: 5510 Site To Site VPN Access To Servers With Overlapped Remote Site

May 18, 2012

I have a requirement to create a site to site vpn tunnel on ASA 5510 from a remote site to my HO, ihave already other site-to-site tunnels are up and running on the ASA.The issue is my remote site has got the network address which falls in one of the subnet used in HO(192.168.10.0/24).My requirement is only  My remote site need to accees couple of my servers in HO which is in 192.168.200.0/24 subnet.

View 2 Replies View Related

Cisco VPN :: 5520 Requirement To Terminate Site-to-site VPN From Remote Site

Jun 17, 2012

We have ordered a pair of Cisco ASA5520 (ASA5520-BUN-K9).Now there is a requirement to terminate site-to-site VPN from remote site. Do we need VPN plus licence for this and how much it cost?

View 1 Replies View Related

Cisco VPN :: 877 / How To IPsec Site To Site Vpn Port Forwarding To Remote Site

Jun 13, 2012

The scenario where a Site to Site VPN tunnel has been established between Site A and Site B. Lan on Site A can ping Lan on Site B. My problem is a Printer behind Site B needs to be accessed by using the WAN IP address of Site A. Also i could not ping the remote lan or printer from the router.
 
Below are my configure on the Cisco 877 in site A.  
 
Building configuration... 
Current configuration : 5425 bytes
!
! Last configuration change at 15:09:21 PCTime Fri Jun 15 2012 by admin01
!
version 12.4
no service pad

[code]....

View 1 Replies View Related

Cisco VPN :: 5505 - Site To Site Connected But Cannot Ping Remote Site

Oct 11, 2011

cisco products and am struggling getting a VPN going between an ASA 5505 and 5510.  I have a VPN created (using the VPN wizward on both) and it shows the VPN is up, but I can't ping the remote site (from either side).

View 11 Replies View Related

Cisco :: Site-to-Site From 5510 To 5510 One Dynamic One Static IP?

May 26, 2011

I'm trying to figure out how to get two 5510 ASA's to establish a Site-to-Site VPN.The version with two static IP's is working perfectly and stable but I haven't figured out how to get a VPN running between a static and a dynamic IP

View 12 Replies View Related

Cisco VPN :: ASA 5505 / Site To Site Vpn With One Site Always Initiate A Tunnel?

Feb 7, 2011

I have ASA 5505, i configured site to site vpn between central site and remote site and is working. Now the problem is we use remote site for troubleshooting purpose, so we need to create a tunnel from remote site to central site. I need to configure such a way that remote site can craete a tunnel to central site, but central site not able to create a tunnel, it just respond to remote site.

View 3 Replies View Related

Cisco VPN :: ASA 5505 Site To Site Connection / Remote Site?

Mar 6, 2011

i have 2 router asa 5505 with base license i wanna make site to site vpn connection and remote site using vpn client to connect first i have hdsl router with 5 public ip i wanna try it by giving 1 public ip to each router and try the vpn but nothing work?

View 1 Replies View Related

Cisco VPN :: ASA5510 - Site To Site With Dynamic IP In One Site

Jan 27, 2012

i want configure VPN between backoffice which have ASA5510 firewall with static IP and site which have cisco router 1861 with dynamic IP.
 
how i can configure the site to site between them?

View 2 Replies View Related

Cisco VPN :: 2901 / 2921 / 5505 ASA - Router Versus Firewall Site To Site VPN?

May 30, 2013

I would like to know both Cisco 2901 or 2921 router and Cisco 5505 ASA can build site to site VPN.
 
1) what is the different to build site to site VPN between router and firewall ?

2) which is the best choice if using in site to site VPN connection ? 

View 9 Replies View Related

Cisco Switching/Routing :: HSRP / BGP / Site To Site VPN On Router 2811

Apr 2, 2012

hsrp+bgp+site to site vpn on router 2811.

View 2 Replies View Related

Cisco VPN :: ASA5505 - Site-2-Site VPN With Linksys In One End?

Sep 25, 2012

Today i'm running with an ASA 5510 at the HQ and a ASA 5505 at my home address with a site-2-site VPN connection.

I'm only using the 5505 to hold this site-2-site VPN so it's a bit overkill. I would like a router at my home with build in access point, but it needs to support site-2-site vpn with the ASA 5510 at the HQ.
 
Are you aware of any Linksys routers that can hold this VPN connection, or is it only "real" cisco routers/firewalls where this is possible?

View 1 Replies View Related

Cisco VPN :: Configuring IPsec Site-to-site VPN With 2911 Router

Mar 15, 2011

I have a Cisco 2911 router and a Cisco RV 120W router and i would like to establish a VPN tunnel between theese two. I have defined the settings on the Cisco RV 120W router and i just want the Cisco 2911 to follow those. setting up a connection with Cisco IOS.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved