Cisco VPN :: 2901 / 2921 / 5505 ASA - Router Versus Firewall Site To Site VPN?

May 30, 2013

I would like to know both Cisco 2901 or 2921 router and Cisco 5505 ASA can build site to site VPN.
 
1) what is the different to build site to site VPN between router and firewall ?

2) which is the best choice if using in site to site VPN connection ? 

View 9 Replies


ADVERTISEMENT

Cisco VPN :: Create A Site To Site VPN Using 2901 And Linksys Router?

Mar 28, 2012

I am trying to create a site to site VPN using a cisco 2901 and Linksys router.I have the VPN configured and connected and I can ping gateway to gateway. However, from the Cisco I can't ping any of the devices beyond the gateway.Example, from the cisco I can ping 192.168.5.254 (gateway IP address) source gig 0/1 and it works great.
 
However if I ping from the cisco 192.168.5.50 (end user PC) source gig 0/1 it doesn't work.I have created a client VPN and that works perfectly.Below is my config.

crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
!
crypto isakmp policy 2

[code]....

View 1 Replies View Related

Cisco VPN :: 2901 / 2951 - Site-to-Site VPN - Constant DPD - Tunnel Drops

Dec 12, 2012

We have approx 40 branch offices - all of which are connected to a single core site over VPN Tunnels using various gear. At one particular site, we are having issues with the tunnel dropping sporadically throughout the day - some days it happens 10 times, some days it happens none. This just randomly started happening two weeks ago, without any changes taking place. Since it started happening, I have upgraded the code to latest versions, but still the issue persists. This particular site has a 2901 and connects back to a 2951.
 
Below is the output from:

debug crypto ipsec
debug crypto isakmp

[code].....

View 1 Replies View Related

Cisco Firewall :: ASA 5505 / Site To Site VPN Using Public Addresses On Local Network

Jul 28, 2011

I have a request to establish a site to site VPN with a customer. While collecting the information I give them our local network subnet which is a private subnet (192.168.5.0). They asked me if I could give them a public address instead. They can not work with the 192.168.5 subnet. Is this possible?
 
My side of the VPN is an ASA 5505 running 8.2(2). The other side i believe is a Checkpoint.

View 5 Replies View Related

Cisco Firewall :: ASA 5505 Site To Site RTP Traffic Is Hitting Deny All Rule?

Aug 13, 2012

Got an ASA5505 connected to another endpoint running IPsec and being NAT'd at each end to a 10.0.0.0/24 network. I can pass other types of traffic through the ASA 5505 but not RTP traffic. The moment it is NAT'd and hits the firewall rules it gets denied by the default deny at the bottom of the list.

Currently the rules are as follows
 
 Incoming External
allow ip any any
allow tcp any any
allow udp any any
default deny

 [code].....
 
It wont allow us to setup a voip call...however when the same call manager sets up a voip call NOT using this ipsec tunnel it works just fine.

View 2 Replies View Related

Cisco Firewall :: ASA 5505 - Unable To Access Certain Ports Over Site To Site VPN

Jan 16, 2013

We have a client that has a Cisco 1801W Firewall that is setup as a site to site VPN terminating to a Cisco ASA 5505. The tunnel is up and established, I can ping from both sides of the tunnel.
 
The problem is the clients behind the Cisco ASA (192.168.2.x) cannot reach certain ports behind the Router (192.168.1.x). The main thing we're trying to do is browse via UNC path (ex: \192.168.1.120 from a 192.168.2.x machine).
 
I got 3389 working after I changed the - ip nat inside source static tcp 192.168.1.120 3389 y.y.x.x 3389 route-map DM_RMAP_1 extendable Modified the command to include the public IP instead of interface FastEthernet0
 
I believe it has something to do with the way NAT and route-maps are setup currently but I'm not familar enough with them to make the changes. I worked with Cisco to ensure the VPN tunnel was fine and it's something security related on the Router.
 
Here is the configuration (removed a few lines not necessary. y.y.x.x = WAN IP of Router x.x.y.y = WAN IP of ASA).
  
Building configuration...
  
Current configuration : 23648 bytes
!
version 12.4
no service pad

[Code].....

View 1 Replies View Related

Cisco Firewall :: ASA 5505 Site To Site VPN Route From Multiple LANs?

Dec 19, 2012

I've set up a standard site-to-site VPN between 2 ASA 5505s and the VPN is working fine for traffic between these ASAs and computers which are in the same LANs.but when I'm trying to connect to computers which are in another VLAN I have a problem.

View 1 Replies View Related

Cisco VPN :: Site To Site VPN IPSEC Tunnel From ASA 5505 To Clavister Firewall

Nov 20, 2012

I have weird problem with a Site to site VPN tunnel from a Cisco ASA 5505 to an Clavister Firewall.When I restart the Cisco ASA 5505 the tunnel is up and down,up, down, down, and I get all strange messages when I see if the tunnel is up or down with the syntax: [code]
 
After a while like 5-10 min the vpn site to site tunnel is up and here is the strange thing happening I have all accesslists and tunnel accesslists right I can only access one remote network (Main site Clavister Firewall) trought the vpn tunnel behind the Cisco ASA 5505, and I have 5 more remote networks that I want to access but only one remote network is working trought the vpn tunnel behind the Cisco ASA. I see that when I do this syntax in ASA: show crypto ipsec sa.They had a Clavister Firewall before on that site before and now they have a Cisco ASA 5505 and all the rules on the main site thats have the big Clavister Firewall is intact so the problems are in the Cisco ASA 5505. [code]
 
All these remote networks are at the Main Site Clavister Firewall.

View 1 Replies View Related

Cisco Firewall :: Max Number Of Clients And Site To Site VPN Tunnels On ASA 5505

Aug 15, 2012

I wanted to know the maximum VPN client sessions (using the Cisco VPN  client) and Site-to-Site VPN tunnels that I can connect to my ASA 5505  simultaneously.
 
In other words, if I have x VPN clients and y Site-to-Site  tunnels, at any time, does x + y have to be <= 10 (Total VPN Peers)?  If yes, can I upgrade to the security plus license to increase the Total VPN Peers to 25?

Licensed features for this platform:
Maximum Physical Interfaces    : 8
VLANs                          : 3, DMZ Restricted
Inside Hosts                   : Unlimited
Failover                       : Disabled
VPN-DES                        : Enabled
[Code]...

View 3 Replies View Related

Cisco Firewall :: ASA 5505 Setup A Site To Site Tunnel?

Nov 13, 2012

I have a 5505 asa code version 8.3(2). Trying to set up a site to site tunnel with someone and he is asking if I can use ike v2. How do I go about setting up the tunnel to use ikev2? Is ikev2 an option with site to site tunnels?

View 5 Replies View Related

Cisco Firewall :: Site-to-Site VPN Between ASA 5510 And 5505 Configuration

Apr 18, 2013

I am not very experienced with Cisco networking.

Here is the situation.
 
Site A - headquarters 192.168.1.x
Site B - remote office 192.168.20.x
Site C - remote office 192.168.30.x
 
Site A - ASA 5510
Site B - ASA 5505
Site C - ASA 5505
 
Site-to-site VPN is established and works between A and B, A and C. Users would like to establish a tunnel between B and C to work on a common project and the data is on Site B.
 
I tried configuring the S2S VPN with pre-shared keys on both firewalls at sites B and C but in the end it is not established (I cannot ping either side). I used the Wizard interface multiple times and one time the CLI. I generally followed the settings chosen between the headquarter and the individual remote sites and tried to replicate them. Obviously I have made a mistake somewhere.
 
Could there be any limitation on the ASA 5505 in terms of licensing and the number of S2S tunnels?

View 7 Replies View Related

Cisco Firewall :: Site To Site VPN Between PIX515 And ASA 5505 With Dual ISP?

Apr 13, 2011

We have got site to site VPN configured between local site with PIX515 6.3(5) and remote site with ASA 5505 7.2(4) . Because of very unreliable internet connection in remote site , we have added new ISP link  which we want to use as redundant link .i understand ASA 5505 can be configured with two ISP link with SLA monitor method for redundancy as per this document ,[URL]
 
my question is how do i set up this pix 515 to have redundant VPN tunnel with remote site (when primiary ISP link fails in remote site and  secondary ISP links takes over ) .  I was thinking of using   PIX 515 with 2 peers in same crypto map used for that sepcific site to site vpn tunnel,not sure that is the right way or not though.But how would i configure ASA 5505 to use backup interface(where secondar isp router conects ) to particitae in Site to site Tunnel .

View 4 Replies View Related

Cisco Firewall :: ASA 5510 / 5505 - Site-to-site VPN One Way Access

Dec 12, 2011

We have a Cisco ASA 5510 at our main office that makes connection with a 5505 at our other office using site to site VPN. (works)
 
Now for the question,
 
we want to access our other office from the main office but we wont want them to have access to our servers etc. so basically we want to control them but they shouldn't have the rights to control us.

Is this possible with a site to site VPN? and how to do it.

View 7 Replies View Related

Cisco Firewall :: ASA 5505 Site-to-Site With UC540 Routing?

Dec 4, 2012

We are setting up a new phone system using the UC540 with a VPN connection between 2 buildings using 2 Cisco ASA 5505's at either end.The problem I am having is getting the phones at the remote site to connect to the UC540 at the main site.
 
Phones/Computers (10.0.1.0/24) -- ASA -------------VPN Tunnel------------- ASA -- UC540 -----------Data Vlan1 (10.0.0.0/24)
|------Voice Vlan100 (10.1.1.0/24)
 
What i am told by UC500 support is that the phones at the remote site will connect if they have connectivity to the TFTP subnet on the UC540, which is 10.1.10.0/30 I added the static route on the ASA and I can ping the 10.1.10.1 TFTP server on the UC540 from the ASA, but not for any other device on the 10.0.0.0/24 network, such as the DC.  I added the static route there and was able to ping, so something in the ASA seems to be preventing it. 
 
I also can't seem to get the ASA at the remote site to ping 10.1.10.1.  I've tried adding the static route there in hopes it would forward it through the VPN tunnel.

View 1 Replies View Related

Cisco Firewall :: ASA 5505 Site To Site VPN Keep Dropping?

Feb 1, 2012

I have an issue with my site to site VPN. I have 4 sites connected  to my main HQ site via Cisco ASAs 5505 firewalls. The problem is that once and then the sites disconnected from my main site. This disconnection is not happening at the same time for the the 4 sites. For example, it might be different site each time disconnected.

View 7 Replies View Related

Cisco Firewall :: Site To Site VPN Configured On ASA 5505

Dec 2, 2012

I have a site to site VPN configured on a asa5505. The tunnel is up and the interesting traffic is successfully being encrypted. The issue is that when inbound traffic originating from a subnet outside of the encrypted range destin to the subnet within the encrypted range, the return traffic is sent into the tunnel and obviously fails.When traffic from 1.1.1.0/24 to 10.2.2.0/24 traverse the firewall the return traffic goes into the tunnel but it doesn't have the correct match parameters?Am I missing something?  I'm expecting that only traffic matching the crypto map will use the tunnel and all other traffic will utilize the default route.

View 3 Replies View Related

Cisco VPN :: Configure A Site-to-Site VPN In ASA 5505 Firewall

Dec 13, 2010

I'm trying to configure a Site-to-Site VPN in a Cisco ASA 5505 firewall which is behind an ISP router (Cisco 800 Series) configured in routing mode (not bridging) and with a static nat of all the ports to the firewall (avoiding bridging mode of the router). [code]

View 12 Replies View Related

Cisco VPN :: Site To Site With ASA 5505 And Sonic Firewall

Aug 27, 2009

I'm trying to establish a vpn tunnel with a sonic firewall.  We've checked both ends for differences and they are the same.  PFS has been disabled on both ends.  I'm seeing this in the logs.
 
%ASA-3-713119: Group = x.x.x.x, IP = x.x.x.x, PHASE 1 COMPLETED
%ASA-5-713068: Group = x.x.x.x, IP = x.x.x.x, Received non-routine Notify message: No proposal chosen (14)

[Code].....

View 4 Replies View Related

Cisco VPN :: 5505 - Site To Site Connected But Cannot Ping Remote Site

Oct 11, 2011

cisco products and am struggling getting a VPN going between an ASA 5505 and 5510.  I have a VPN created (using the VPN wizward on both) and it shows the VPN is up, but I can't ping the remote site (from either side).

View 11 Replies View Related

Cisco VPN :: How Many Roaming User And Site-to-site Vpn Tunnels Supported In ISR 2921

Sep 4, 2012

How many [concurrent and maximum] roaming user tunnel and site to site vpn tunnels are supported in ISR 2921 ..

View 5 Replies View Related

Cisco WAN :: 2921 / Create Another Ipsec Site-to-site VPN Connection

May 11, 2013

currently I have a Cisco 2921 router and I have one active site-to-site VPN connection through the internet.my question is; how I can create another Ipsec site-to-site VPN connection ? I have to keep the 1st VPN connection active.

View 11 Replies View Related

Cisco VPN :: Site To Site VPN 2921 Failure And Fail To Allocate

May 2, 2012

I'm trying to configure a VPN between a Check Point firewall (UTM-1, running R75.10) and a 2921 router (15.0(1r)M9).Here's the relevant config (names and external IP addresses only modified - using 1.1.1.1 for Check Point and 2.2.2.2 for Cisco):

================================================
## vpn phase 2 access list (also used for route map)access-list 2699 permit ip 192.168.209.16 0.0.0.15 192.168.51.128 0.0.0.127
 
## nat route maproute-map R1 permit 2699match ip address 2699
 
## phase 1 detailscrypto isakmp policy 10encr aes 256authentication pre-sharegroup 2lifetime 86400
 
## pskcrypto isakmp key ............... address 1.1.1.1 no-xauth
 
## phase 2 transform setcrypto ipsec transform-set AES-256 esp-aes 256 esp-sha-hmac
 
## phase 2 detailscrypto map VPN 2699 ipsec-isakmp set peer 1.1.1.1set pfs group2set transform-set AES-256set security-association lifetime seconds 3600match address 2699
 
## nat definitionsip nat inside source static 10.231.70.250 192.168.209.17 route-map R1 reversibleip nat inside source static 10.231.10.1 192.168.209.18 route-map R1 reversibleip nat inside source static 10.231.10.10 192.168.209.19 route-map R1 reversible
================================================
 
Phase 1 appears to complete without issue, however at phase two it fails with "Fail to allocate ip address" (full debug attached). Everything I've read suggests that this issue relates to client based VPN, where the Cisco router cannot assign other related attributes to the requesting client (DNS server etc.) but obviously that isn't relevant in this case. Why the router might think it's a client connection and how to stop it?
 
While I'm troubleshooting this issue currently with a Check Point VPN we've noticed the issue appear on other VPNs (to Cisco 880 routers), and the problem seems to solve itself (which obviously doesn't useful in finding the cause of the problem!).

View 4 Replies View Related

Cisco VPN :: 2921 Site-2-Site IPSEC VPN Tunnel Will Not Come Up

Dec 5, 2012

I am setting up a IPSEC VPN tunnel between a Cisco 2921 and ASA 550x. [code]

View 6 Replies View Related

Cisco VPN :: ASA 5505 / Site To Site Vpn With One Site Always Initiate A Tunnel?

Feb 7, 2011

I have ASA 5505, i configured site to site vpn between central site and remote site and is working. Now the problem is we use remote site for troubleshooting purpose, so we need to create a tunnel from remote site to central site. I need to configure such a way that remote site can craete a tunnel to central site, but central site not able to create a tunnel, it just respond to remote site.

View 3 Replies View Related

Cisco VPN :: ASA 5505 Site To Site Connection / Remote Site?

Mar 6, 2011

i have 2 router asa 5505 with base license i wanna make site to site vpn connection and remote site using vpn client to connect first i have hdsl router with 5 public ip i wanna try it by giving 1 public ip to each router and try the vpn but nothing work?

View 1 Replies View Related

Cisco VPN :: 1812 IOS And ASA 5505 Router - Setting Up Site-to-site VPN On 881

Mar 31, 2011

Just now my boss asked me to prepare to set up site-to-site VPN on Cisco 881 Integrated Services router to ASA 5505 router which is now running at the HQ side. I am now learning pdf file from Cisco which mention how to setup site-to-site VPN between Cisco 1812 IOS router and ASA 5505 router by using ASDM V6.1 and SDM V2.5. Can't find the paper for that Cisco 881 device.

View 4 Replies View Related

Cisco VPN :: One Router On ASA 5505 Site To Site VPN Can't Ping Other

Feb 20, 2013

I have two Cisco ASA routers and I have a site to site vpn set up between the two. The VPN link works but Site A can't ping anything on Site B. Site B can ping Site A. Site B can ping other pcs on it's own network. Site A has been in place for a while and has other site to site VPNs that work fine, so I think the problem is with Site B. Here is the config for Site B:
 
Result of the command: "show running-config"
 
: Saved
:
ASA Version 8.4(4)1
!
hostname SaskASA
enable password POgOWyKyb0jgJ1Hm encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names

[code]....

View 6 Replies View Related

Cisco VPN :: ASA 5505 / Site To Site Vpn Behind Home Router?

Nov 25, 2012

I have an offsite employee at an apartment complex where she uses the leasing offices internet connection.  I have an ASA 5505 but I don't know how to make this work behind the leasing offices router and other network equipment.  Is there any way to have her connect back to our corporate network using site to site vpn without touching the leasing office devices?  She needs VoIP and corporate server access.

View 3 Replies View Related

Cisco VPN :: Site To Site VPN Between ASA 5505 And 800 Router

Nov 21, 2011

Hoping that someboy can see the error of my ways.  It seems very like the problem that i read here: URL
 
We have a cisco 800 in a remote site which we wanted to use for a site to site vpn.  Went through the steps on the ASA 5505 and the 800 and have got to the stage were the tunnel is up and connected.  Getting traffic through it is another matter.  Remote network is 172.20.224.0/20 and the server network behind the ASA is 192.168.168.0/24. The tunnel does intiate when you send traffic from 172 ......to 192.......  Both the ASA and 800 report the tunnel is up.  If i look at the stats using ccp on the 800 i can see the encapsulation packets graph shooting up but nothing cominbg back.  I did packet captures on the 5505 and could not see anything coming from the tunnel so i dont belive its making it to the ASA.  Here is the config from the 800:
 
Building configuration...

Current configuration : 6488 bytes
!
version 12.4
no service pad
service timestamps debug uptime
service timestamps log uptime
[Code]....

View 9 Replies View Related

Cisco VPN :: 5505 Connection To Mapped File Shared Dropping On A Site-to-Site VPN

Nov 27, 2011

We've just deployed a site-to-site VPN using a 5505 ASA on the client's site and a checkpoint Nokia FW on our site. Everything seems to be fine except that the user's connections to their file shares seem to be intermittently dropping. One minute the connection to the shares is there, next thing it's lost. There is no logic to it because no two users are experiencing issues at the same time, as a matter of fact even on the same PC where a user has access to 3 shares on 3 different servers, one could be showing as connected whereas the other two be dropping. [code]
 
As you can see the Duplex and Speed are set to auto, I've rectified this since then and I'm keeping a close eye on the output errors, and collisions. However, I'm afraid that this did not rectify the issue and the users are still experiencing intermittent connection dropping to their file shares over the VPN!

View 1 Replies View Related

Cisco :: ASA 5505 Site To Site RTP Traffic Is Hitting Deny All Rule?

Aug 14, 2012

Got an ASA5505 connected to another endpoint running IPsec and being NAT'd at each end to a 10.0.0.0/24 network. I can pass other types of traffic through the ASA 5505 but not RTP traffic. The moment it is NAT'd and hits the firewall rules it gets denied by the default deny at the bottom of the list.

Currently the rules are as follows

Incoming External
allow ip any any
allow tcp any any
allow udp any any
default deny

[code]....

It wont allow us to setup a voip call...however when the same call manager sets up a voip call NOT using this ipsec tunnel it works just fine.

View 3 Replies View Related

Cisco VPN :: Setup Site-to-Site Connection With 5505 ASA Using IPSec And Isakmp?

Aug 8, 2011

im drawing a blank trying to setup a site to site connection with a 5505 ASA using ipsec and isakmp.i have the pre shared key as well as the external address of the other end of the tunnel but do not remember what the commands are to setup the crypto map and isakmp.

View 7 Replies View Related

Cisco AAA/Identity/Nac :: ASA 5505 - Procedure For Monitoring Site-to-site VPN Tunnel?

Apr 30, 2012

Need to know the step by step procedure for monitoring site-to-site VPN tunnel (up/down) using SNMP on Cisco ASA 5505. 

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved