Linksys Wireless Router :: WRT320N Automatic Channel Selection?
Apr 18, 2010
I am working with a WRT320N for some weeks now, but I don't get the fact that 40Mhz channel width is only allowed for Automatic channel selection.I keep losing connection and the channel keeps changing.I want an option to change the channel manually (like in every good WLAN router!!), also with N data rate (40Mhz channel width).I know how to select the best channel, so why aren't I able to change it the way I like it?
View 4 Replies
ADVERTISEMENT
Aug 20, 2012
I try to let Cisco ASA automatic select a tunnel group for users, after user input username and password. I try to do this without user selection a connection profile on login page. Authentication on ASA<>ACS 5.3<>MS AD. How i can will do this? Radius attribute class=group_policy don't work.
View 1 Replies
View Related
Jun 3, 2013
We have a deployment with six 1524SB mesh APs. Two are used as RAPs and face east and west respectively with directional antennas and two MAPs on each side with omni antennas. The RAPs are within 20 feet of each other. I set the bridge group name as east or west depending on which side of the mesh the equipment is located but noticed the downlink channel is set to 56 on both RAPs. I don't remember setting the channel for the RAPs, but they aren't using the global DCA.Would best practice be to change the downlink to unique channels on the RAPs, enable DCA (if it will let me), or is a unique bridge group name sufficient enough?
View 2 Replies
View Related
Apr 17, 2013
I am having anyconnect version 3.1.03103, windows7 & 8 and asa 5520 (8.4). I have gone through alot of work to solve this issue but it not hapening. On clientless ssl vpn it prompts me for manual certificate selection but on anyconnect client it is not. profile configuration is mentioned below. In the highlighted line below i have changed UserControllable="true" still no results.
<?xml version="1.0" encoding="UTF-8"?>
-<AnyConnectProfile xsi:schemaLocation="[URL]" xmlns:xsi="[URL]" xmlns="[URL]">-<ClientInitialization>
[Code]....
View 0 Replies
View Related
Dec 28, 2011
Is there a "best" channel to use for the router -- e.g. the one that would provide maximum range? I live in a fairly large home and the connection deteriorates in some rooms (not lost altogether, but weaker). Also, what is "channel width"? It's set to 20MHZ, but there is also a setting for Automatic 20/40MHZ. What's the adv advantage of one setting over the other?
View 9 Replies
View Related
Feb 22, 2012
I am trying to set up WRT on my WRT320N access point so I can connect it to my other access point that also doubles as my DSL router.Where can I find the WDS on the WRT320N?
View 1 Replies
View Related
Apr 25, 2013
I have a WRT320N, firmware version 1.0.05., Windows 7 Home Premium SP1, and a Hewlett Packard laptop.I would like to utilize both bands on my router at the same time for internet access, so that I can have the one my kids use shut down at a certain time but mine stay up.If not, what's the closest I can get, even if I have to purchase additional items to do so? Do I have to manually turn their band off when I want it off? And can I even have both bands in use at the same time?
I looked at my Cisco online info by access the IP address. I see the Access Restrictions tab. Can I even set usage by specific computer? If so how do I do that?
View 3 Replies
View Related
Jul 20, 2009
After playing around I cannot get the router to get into the wide 40 MHz mode any more (2.4 GHz)
View 5 Replies
View Related
Dec 6, 2011
I've purchased this router a few weeks ago, but I can't use it as I can't get on the internet with it plus my laptop which as wifi will not recognize it.
I would really like get it going, I've tried live chat but I guess the techy didn't have the patience, I am a slow typer for lack of a better word.
View 1 Replies
View Related
Apr 1, 2012
This problem is on a Cisco E1200 (FW: 1.0.03) and using a browser to modify the routers settings.I'm connected to the router from a wired connection, and I'm trying to turn off the encryption, and just have the router have the setting "disabled" as the selection for "Wireless Security".
However, it seems when I do this, the moment I press "Save" the router gets disconnected from my computer (the wired connection) and the only way to get reconnected is to run the Cisco Connect software from the computer that's hard wired to the router.
Once I get back to that screen in the routers settings, and try it again, the same thing happens.If I change anything else under the routers settings, the connection stays connected, but only when I change the wireless security settings to disabled I see this problem.
View 1 Replies
View Related
Aug 2, 2011
I have a WRT54GS wireless router. I can successfully set up the router with my DSL modem for PPPoE. Here's my problem. The router configuration requires you to put in the userID and password, then logs you in to your ISP automatically. I DON'T want it to do that. Is there any way to configure for PPPoE where ISP login is controlled manually; i.e., when the user tries to connect to a web page, a dialog pops up for entering the password?
View 1 Replies
View Related
Jul 27, 2012
Just installed linksys wrt320n. Desktop and one laptop (wireless) connect. Both windows 7. A second laptop (Vista) errors out with message "the selected data rate is not correct". This laptop sees the router (since I see the router name and it validates the passphrase) but I cannot ping the router. I saw two messages on this site suggesting to enable WMM and use security WPA2. I have verified that both of these are so set.
View 9 Replies
View Related
Feb 2, 2011
I'm currently using my WRT320N router as an access point (connected to another linksys router), but I've lost my username and password to access the web-based utility. So I need to press the reset button and set it up again. Currently everything is working fine, but I've forgotten how to configure the router for this purpose, and I can't find instructions in the user's guide online. I seem to remember it being troublesome. I know I have to assign a different IP address (currently I'm using 192.168.1.113.) What other settings (if any) need to be changed?
View 2 Replies
View Related
Aug 16, 2011
I want to setup the following:
Internet through DSL-Thompson TG 789 VN router ---> several yards --> Linksys WRT320N --> wired computer netwerk | |with printer
| |
---> Wireless Netwerk --> laptops / phones <--- (WAN depending on strongest signal)
|
---> several servers
The Thompson does the DHCP and routing. It is the gateway through the internet, IP 192.168.2.254 (mask 255.255.255.0).I can't replace the thompson since it is delivered by my provider. SSID = BertB I want to achieve that all the compuers / laptops / phone and printer are in one network and can communicate with each other So the only possibility, as far as I can see, is to set up the Linksys as a bridge.
I have to do the following at the Linksys but have some questions as mentioned below:
SSID = BertB (the same)
channel = different from the channel used by Thompson
DHCP = off
IP = fixed (192.168.2.253)
gateway = 192.168.2.254
[code]....
how the thompson and the Linksys will build a connection with each other, or will this happen automatically through the above setup?Do I have to put the mac address of the thompson in the Linksys and/or vice versa?
View 1 Replies
View Related
Oct 8, 2009
How do I disable the wireless?
View 9 Replies
View Related
Dec 14, 2009
I just bought a Linksys 320N router to replace another competitors router. I am trying to connect to my VPN server from outside my network. I have the external ip to my network. I setup the new 320N router just like the old router. set dmz ip to internal ip of vpn server, set port forwarding to 1723, both, internal ip of vpn server, I have a way to test the vpn while i am inside my network. So, I can watch the VPN server log and see the request come into the server and it times out with the Linksys 320 N hooked up. If I have the old router hooked up, the vpn establishes a connection.
View 9 Replies
View Related
Jul 24, 2011
I have a WRT320N router with firmware version 1.0.01 build 008. I just got an iPad and while it can find my router, I can't access the WiFi when I enter my password. I can use the router with my laptop so I know the connection and password are ok.I've seen two administrators on here suggest the same thing. And one person responded that it worked. The identical directions were:
Try changing some advanced wireless settings on the router.Connect the computer to the router with the Ethernet cable. Open the setup page of the router.Click on wireless tab and set the configuration view to manual. Change the wireless channel to 11. Save the settings.Go to wireless tab and click on Advanced wireless settings.Change Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.Try to connect to the wireless network again and see if that works.
1 - I think my computer already is connected to the router with the Ethernet cable - I mean there is an Ethernet cable attached to both my computer and my router - in slot 1 on the router
2 - the only thing I know how to access is the Linksys EasyLink Advisor. What and where is the setup page of the router?
View 4 Replies
View Related
Dec 20, 2011
I am running a WRT320N with Firmware 1.0.04Trying to Upgrade the Firmware to 1.0.05 it always fails at about 24% progress with a message saying an invalid value has been entered.I downloaded the firmware from your homepage twice so that the file is not corrupted
View 4 Replies
View Related
Feb 17, 2010
I have some major problem with my WRT320 router. For some reasonit won't let me connect to Age of Empires 2 (other, newer games work fine) via Hamachi. When i want to connect i can see the game but when i want to join it tries to connect but fails telling me i'm unable to join... I know the problem is in the router because when I connect my modem directly to my computer Age of Empires connects fine!
View 8 Replies
View Related
Oct 19, 2011
We have WRT320N (Model No.) and when I moved i notice that my wirelss network does not have internet connection. Even after I hook everything up it doesn't work, my computer does not recognize the network but the laptop does. I have prior knowledge about computers and the internet but I don't know why I am having a problem. Is it because I moved and the data in my previous home does not match the data here?
View 3 Replies
View Related
Aug 22, 2011
I'm using my WRT320N as a home router, I need more ipadresses to be delivered to my computers, yet I can't get my router to give med wider netmask range. In the list I get 255.255.255.0 - 255.255.255.240 or something like that. I need 255.0.0.0 on my network and that would be perfect if i could get that...
View 5 Replies
View Related
Aug 7, 2011
I've got the below setup, have the wrt320 setup as a switch / wifi ap, i'm totally unable to access its management page from pc1 but am able to via pc 3, why is this, how can i get around this? Routing? Also am unable to access pc3's resources from pc1..When i enter the ip of the wrt320 it thinks about it and before it has come up with the user/password screen but it soon dissapears and firefox comes up with a "Unable to connect Firefox can't establish a connection to the server at 192.168.0.2." message.
View 1 Replies
View Related
May 20, 2009
I have a WRT320N router. It is hooked to a Comcast cable modem (Motorola SB5101). After using it for a few days, my Internet connection becomes very slow and I have to reset the router. Generally I get download speeds of 10+ Mbps, but then it slows to about 1 Mbps or less. One time I was only getting 300 Kbps.I'm using a wired connection when this happens, so wireless is not the issue. Also, there is no firmware update available for my router; 1.0.01 was already on it. The only settings that I've changed besides the password are related to the wireless.As soon as I unplug the router and plug it back in, it's fine again for a few days. At first I thought it might be my cable Internet connection, but because I'm not having to reset the cable modem?
View 9 Replies
View Related
Feb 21, 2012
i have a wrt320n router and it used to work before but my internet provider said that its a router issue might need to change the wep setting or channel or connect ps3 up through the routers list of accessible .. So basically its not registering the IP address given and the wep key isn't wrong but its not approving it . Not sure what to do. I tried unplugging the router and I also did the same for the modem no luck. Signals 100% and my lap top and wii connect fine.
View 1 Replies
View Related
Oct 25, 2011
Today has bought a router. Before it at me was D-link Dir 320. IPTV on DIR 320 worked perfectly. On WRT320N does not work. Firmware has updated to Ver.1.0.04 build 1. Prompt that it is necessary to make?
View 5 Replies
View Related
Oct 8, 2011
I'm trying to register my new linksys e2000-ew wireless router but it doesn't show up in the selection pull down menu. When I try the e2500 it says my serial# isn't correct.
View 5 Replies
View Related
Jan 27, 2013
I have to go back into settings and deactivate the IPV6 tunnel daily to keep access to youtube. My provider does not support IPV6. Saving changes has no effectIs there a way to ensure that the IPV6 tunnel remains deactivated?I have firmware version 1.0.30 build 126544 2011-12-24. Firmware update function says I got the latest version.
View 5 Replies
View Related
Dec 9, 2011
I have a WRT100 wireless router, which is configured for a PPPOE connection to my ISP. After running one of the tools to determine responsiveness of DNS name services, I would like to manually configure my DNS services, placing a more responsive service as my first DNS choice. In the router administration, I can configure three static DNS IP's. However, I don't see any place in the configuration to turn off the automatic DNS configuration from my ISP. So, when I issue an IPCONFIG /ALL on my computer, the DNS listing shows two DNS Name Services from my ISP ahead of the three static DNS IP's that I configured.
View 3 Replies
View Related
Nov 19, 2012
I am curious as what the packet size should be set . is the bigger size == lower speed smaller == faster or just leave automatic setting for packet size?
View 4 Replies
View Related
Aug 25, 2011
I have a problem when trying to configure my wrt320n , I put in the exact same config. as I had with my wrt54g, and I do mean the exact same, even the name and all, but when I try to save the config on Advance Routing I get the message "Invalid static route", I think it's a bug
View 9 Replies
View Related
Feb 22, 2012
I have a wrt320n. works good with all my computers. I bought a Visio tablet and I can only hook up to an open network.
I want to be able to use my router with security. Such as wpa/wpa2 or wep. I tried all connections. Only the open network is the only one that I can connect to.This my first tablet and I never hooked one up before.
View 9 Replies
View Related
Feb 24, 2012
I just installed a WRT320N for someone's home network, with the intent of providing better speed for network printing.
Unfortunately, all four of his n-capable Windows computers will only connect at 54mbps. Four different computers (Win7, Vista, XP), each with a different brand/model of n-capable network adapter.
I suppose I could try setting the wireless to n-only instead of "mixed". However, he's got a couple g-only devices as well, so that wouldn't work.
I tried updating the firmware to latest/greatest - no effect.
View 5 Replies
View Related
Dec 29, 2011
Kindle fire won't connect to my router WRT320N- I have the correct password- signal strength is excellent- I have set up other devices without problems- prompt reads "connection error unable to connect to access point. Please check the password you have provided."
View 3 Replies
View Related
