Linksys Wireless Router :: Laptop Cannot Connect To Wrt320n
Jul 27, 2012
Just installed linksys wrt320n. Desktop and one laptop (wireless) connect. Both windows 7. A second laptop (Vista) errors out with message "the selected data rate is not correct". This laptop sees the router (since I see the router name and it validates the passphrase) but I cannot ping the router. I saw two messages on this site suggesting to enable WMM and use security WPA2. I have verified that both of these are so set.
View 9 Replies
ADVERTISEMENT
Jul 24, 2011
I have a WRT320N router with firmware version 1.0.01 build 008. I just got an iPad and while it can find my router, I can't access the WiFi when I enter my password. I can use the router with my laptop so I know the connection and password are ok.I've seen two administrators on here suggest the same thing. And one person responded that it worked. The identical directions were:
Try changing some advanced wireless settings on the router.Connect the computer to the router with the Ethernet cable. Open the setup page of the router.Click on wireless tab and set the configuration view to manual. Change the wireless channel to 11. Save the settings.Go to wireless tab and click on Advanced wireless settings.Change Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.Try to connect to the wireless network again and see if that works.
1 - I think my computer already is connected to the router with the Ethernet cable - I mean there is an Ethernet cable attached to both my computer and my router - in slot 1 on the router
2 - the only thing I know how to access is the Linksys EasyLink Advisor. What and where is the setup page of the router?
View 4 Replies
View Related
Feb 17, 2010
I have some major problem with my WRT320 router. For some reasonit won't let me connect to Age of Empires 2 (other, newer games work fine) via Hamachi. When i want to connect i can see the game but when i want to join it tries to connect but fails telling me i'm unable to join... I know the problem is in the router because when I connect my modem directly to my computer Age of Empires connects fine!
View 8 Replies
View Related
Feb 24, 2012
I just installed a WRT320N for someone's home network, with the intent of providing better speed for network printing.
Unfortunately, all four of his n-capable Windows computers will only connect at 54mbps. Four different computers (Win7, Vista, XP), each with a different brand/model of n-capable network adapter.
I suppose I could try setting the wireless to n-only instead of "mixed". However, he's got a couple g-only devices as well, so that wouldn't work.
I tried updating the firmware to latest/greatest - no effect.
View 5 Replies
View Related
Dec 29, 2011
Kindle fire won't connect to my router WRT320N- I have the correct password- signal strength is excellent- I have set up other devices without problems- prompt reads "connection error unable to connect to access point. Please check the password you have provided."
View 3 Replies
View Related
Feb 22, 2012
I am trying to set up WRT on my WRT320N access point so I can connect it to my other access point that also doubles as my DSL router.Where can I find the WDS on the WRT320N?
View 1 Replies
View Related
Apr 25, 2013
I have a WRT320N, firmware version 1.0.05., Windows 7 Home Premium SP1, and a Hewlett Packard laptop.I would like to utilize both bands on my router at the same time for internet access, so that I can have the one my kids use shut down at a certain time but mine stay up.If not, what's the closest I can get, even if I have to purchase additional items to do so? Do I have to manually turn their band off when I want it off? And can I even have both bands in use at the same time?
I looked at my Cisco online info by access the IP address. I see the Access Restrictions tab. Can I even set usage by specific computer? If so how do I do that?
View 3 Replies
View Related
Jul 20, 2009
After playing around I cannot get the router to get into the wide 40 MHz mode any more (2.4 GHz)
View 5 Replies
View Related
Dec 6, 2011
I've purchased this router a few weeks ago, but I can't use it as I can't get on the internet with it plus my laptop which as wifi will not recognize it.
I would really like get it going, I've tried live chat but I guess the techy didn't have the patience, I am a slow typer for lack of a better word.
View 1 Replies
View Related
Feb 2, 2011
I'm currently using my WRT320N router as an access point (connected to another linksys router), but I've lost my username and password to access the web-based utility. So I need to press the reset button and set it up again. Currently everything is working fine, but I've forgotten how to configure the router for this purpose, and I can't find instructions in the user's guide online. I seem to remember it being troublesome. I know I have to assign a different IP address (currently I'm using 192.168.1.113.) What other settings (if any) need to be changed?
View 2 Replies
View Related
Aug 16, 2011
I want to setup the following:
Internet through DSL-Thompson TG 789 VN router ---> several yards --> Linksys WRT320N --> wired computer netwerk | |with printer
| |
---> Wireless Netwerk --> laptops / phones <--- (WAN depending on strongest signal)
|
---> several servers
The Thompson does the DHCP and routing. It is the gateway through the internet, IP 192.168.2.254 (mask 255.255.255.0).I can't replace the thompson since it is delivered by my provider. SSID = BertB I want to achieve that all the compuers / laptops / phone and printer are in one network and can communicate with each other So the only possibility, as far as I can see, is to set up the Linksys as a bridge.
I have to do the following at the Linksys but have some questions as mentioned below:
SSID = BertB (the same)
channel = different from the channel used by Thompson
DHCP = off
IP = fixed (192.168.2.253)
gateway = 192.168.2.254
[code]....
how the thompson and the Linksys will build a connection with each other, or will this happen automatically through the above setup?Do I have to put the mac address of the thompson in the Linksys and/or vice versa?
View 1 Replies
View Related
Oct 8, 2009
How do I disable the wireless?
View 9 Replies
View Related
Dec 14, 2009
I just bought a Linksys 320N router to replace another competitors router. I am trying to connect to my VPN server from outside my network. I have the external ip to my network. I setup the new 320N router just like the old router. set dmz ip to internal ip of vpn server, set port forwarding to 1723, both, internal ip of vpn server, I have a way to test the vpn while i am inside my network. So, I can watch the VPN server log and see the request come into the server and it times out with the Linksys 320 N hooked up. If I have the old router hooked up, the vpn establishes a connection.
View 9 Replies
View Related
Dec 20, 2011
I am running a WRT320N with Firmware 1.0.04Trying to Upgrade the Firmware to 1.0.05 it always fails at about 24% progress with a message saying an invalid value has been entered.I downloaded the firmware from your homepage twice so that the file is not corrupted
View 4 Replies
View Related
Oct 19, 2011
We have WRT320N (Model No.) and when I moved i notice that my wirelss network does not have internet connection. Even after I hook everything up it doesn't work, my computer does not recognize the network but the laptop does. I have prior knowledge about computers and the internet but I don't know why I am having a problem. Is it because I moved and the data in my previous home does not match the data here?
View 3 Replies
View Related
Aug 22, 2011
I'm using my WRT320N as a home router, I need more ipadresses to be delivered to my computers, yet I can't get my router to give med wider netmask range. In the list I get 255.255.255.0 - 255.255.255.240 or something like that. I need 255.0.0.0 on my network and that would be perfect if i could get that...
View 5 Replies
View Related
Aug 7, 2011
I've got the below setup, have the wrt320 setup as a switch / wifi ap, i'm totally unable to access its management page from pc1 but am able to via pc 3, why is this, how can i get around this? Routing? Also am unable to access pc3's resources from pc1..When i enter the ip of the wrt320 it thinks about it and before it has come up with the user/password screen but it soon dissapears and firefox comes up with a "Unable to connect Firefox can't establish a connection to the server at 192.168.0.2." message.
View 1 Replies
View Related
May 20, 2009
I have a WRT320N router. It is hooked to a Comcast cable modem (Motorola SB5101). After using it for a few days, my Internet connection becomes very slow and I have to reset the router. Generally I get download speeds of 10+ Mbps, but then it slows to about 1 Mbps or less. One time I was only getting 300 Kbps.I'm using a wired connection when this happens, so wireless is not the issue. Also, there is no firmware update available for my router; 1.0.01 was already on it. The only settings that I've changed besides the password are related to the wireless.As soon as I unplug the router and plug it back in, it's fine again for a few days. At first I thought it might be my cable Internet connection, but because I'm not having to reset the cable modem?
View 9 Replies
View Related
Feb 21, 2012
i have a wrt320n router and it used to work before but my internet provider said that its a router issue might need to change the wep setting or channel or connect ps3 up through the routers list of accessible .. So basically its not registering the IP address given and the wep key isn't wrong but its not approving it . Not sure what to do. I tried unplugging the router and I also did the same for the modem no luck. Signals 100% and my lap top and wii connect fine.
View 1 Replies
View Related
Oct 25, 2011
Today has bought a router. Before it at me was D-link Dir 320. IPTV on DIR 320 worked perfectly. On WRT320N does not work. Firmware has updated to Ver.1.0.04 build 1. Prompt that it is necessary to make?
View 5 Replies
View Related
Aug 25, 2011
I have a problem when trying to configure my wrt320n , I put in the exact same config. as I had with my wrt54g, and I do mean the exact same, even the name and all, but when I try to save the config on Advance Routing I get the message "Invalid static route", I think it's a bug
View 9 Replies
View Related
Feb 22, 2012
I have a wrt320n. works good with all my computers. I bought a Visio tablet and I can only hook up to an open network.
I want to be able to use my router with security. Such as wpa/wpa2 or wep. I tried all connections. Only the open network is the only one that I can connect to.This my first tablet and I never hooked one up before.
View 9 Replies
View Related
Aug 29, 2011
I have a Linksys WRT320N Wireless Router and I am having an issue where it seems like gigabit (10/100/1000) ready computers are getting fast ethernet (10/100) speeds and fast ethernet computers/devices are receiving gigabit speeds. What I mean is the computers that are gigabit ready and are using cat6 cables are showing green icons on the Linksys WRT320N router and my network switch, which is only 10/100 ready and uses a cat5e cable to connect to the router, shows a blue icon indicating it is connected at gigabit speeds. Is the manual incorrect and green icons really mean gigabit speeds?
View 5 Replies
View Related
May 4, 2012
I have what should be simple. Home network on cable. WRT320N is main router cabled to desktop with GB card. It is hard-wired to a Netgear WNR3500L (also gigabit). That router is hard-wired to a desktop with GB card. For testing I connected a second machine hard-wired to the WRT320N with a 10/100 card. All machines recognized cards properly at correct speed. I ran LAN Speed Test between machines. Speeds were comparable between machines regardless of cards. GB -> GB was mid-30's write, mid-80's read with GB -> 10/100 a couple of ticks slower but not significantly. The LED's on both routers will show different color if GB connection and both showed GB for the desktop connection but not the interconnect between the routers. The routers are connected at about 100' with CAT5E and straight-through.
View 5 Replies
View Related
Mar 5, 2012
my wrt320n keeps dropping internet connection and I have to keep unplugging it.
View 2 Replies
View Related
Apr 18, 2010
I am working with a WRT320N for some weeks now, but I don't get the fact that 40Mhz channel width is only allowed for Automatic channel selection.I keep losing connection and the channel keeps changing.I want an option to change the channel manually (like in every good WLAN router!!), also with N data rate (40Mhz channel width).I know how to select the best channel, so why aren't I able to change it the way I like it?
View 4 Replies
View Related
Feb 13, 2012
Just recently bought a Linksys E4200 router and it's been rocking so far! I upgraded from a WRT320N. However it seems that calling with SIP (using my Voip Buster account) doesn't work anymore.I don't seem to be able to register with the Voip service. Port is the standard 5060 (if my memory serves me well, I'm not at home now) and I already activated on the router the special tick for Voip ALG calling. Router is upgraded to the latest firmware and it's the V1 router.With all of the above, I still can't connect using SIP to VoiceBuster. It worked like a charm with the WRT320N so it's something with the router?.
View 2 Replies
View Related
Dec 4, 2009
I've been using WRT320N few days now and I am happy with it so far! It's not overheated as many people reported and performance is also great (wifi as well as gigabit ports). I tested all functions (NAT, Advanced Wireless Settings, Port Forwarding, Access Restrictions...) - all working great, but I am little stuck on the easiest one - configure it temporarily as regular gigabit switch with an IP address: I put my WAN cable and LAN cables in the 1-4 ethernet ports. NAT, DHCP and Firewall are disabled in the router. I have DHCP server in my network that is assigning IP addresses based on MAC address. In "Setup" > "Basic Setup" > "Router IP" I would like to set up automatic configuration - DHCP, but it is not possible, so I just type the same IP address that It should get from the DHCP server (in this case 10.109.249.42). Does all 1-4 ethernet ports have the same MAC address (in this case 00:25:9C:4D:16:86)? Everything is working fine, my computer's IP addresses are succesfully assigned (as well as wifi devices) from DHCP server in my network, but I feel like WRT320N's address is not assigned - the problem is I can't connect to router's administration under http://10.109.249.42. There is no IP restrictions for remote management.
Screenshot of my "Status" > "Local Network" Cisco CCNA Exploration certified
View 9 Replies
View Related
Apr 23, 2013
I have purchased Linksys WRT320N because my ISP give me speeds of 400 mb/s download and 200 mb/s upload. After I tested the speed my router get only 137 mb/s, why is that? I paid for gigabit router!?
View 7 Replies
View Related
Dec 26, 2011
I no longer have a software disc, but setup via the 192.168.1.1 page has worked out fine...until the last reset. After the last reset/reboot of the wifi, I was unable to set up the wifi beyond use with my laptop. This is, no doubt, user error.WRT320N.No hard wire, wifi is connected to the cable modem. Everything in the house was on the wireless.
Issue: Laptop finds and connects to wifi just fine, password works just fine.iPhone cannot even detect the wifi in the house (but finds every other wifi in the neighborhood)iPad cannot detect the wifi in the house (but finds every other wifi in the neighborhood)Desktop cannot detect the wifi in the house (but finds every other wifi in the neighborhood)What do I need to tweek in the admin page 192.168.1.1 to allow other computers to jack into my wifi?
View 2 Replies
View Related
Jul 20, 2011
I have a Linksys WRT320N wireless router at my salon with an Ethernet connection to my POS terminal, and wireless access for my notebook. When it was originally set up (by a technical person), I used a password that is my own personal (private) password. Since then, when my clients have asked to use the wireless network, I have had to enter my password into their device since I can't tell them what it is.
Today I decided to resolve the issue, so I changed the password to something simple. But, now the password only seems to work for me and not anyone else.
I don't understand why this is happening, when my previous password worked fine on other devices.
I hesitate to keep messing with it since I am not a very technical person. For example, just changing the password today and resetting the router, etc, was a challenge and I about had a heart attack when my POS terminal wasn't responding (luckily I got some assistance from my Internet provider, even though its not their router).
I do not have Cisco Connect installed on my Notebook at work (did not have a CD drive at the time). I do have a CD drive now and can install Cisco Connect if necessary. (Again, a bit of concern that I will screw something up in the process and not have POS access.)
View 3 Replies
View Related
Dec 1, 2011
My router automatically sets the wireless network settings to the original default. Sometimes after 1 hour sometimes after a week. It resets to automatic instead of the manulal settings I use for configuration. Changes the SSID to Linksys and disables wireless security.
View 5 Replies
View Related
Jan 2, 2013
My WRT320N loses the configuration every time there is a power outage, the unit is unplugged or the reset button is pressed.
View 2 Replies
View Related
