Linksys Wireless Router :: Set Up EA4500 Without A Computer?
Sep 2, 2012
I've looked all over the internet for this and can't find a definate answer. Waited for live chat and got kicked before I got to talk to someone... Just sold my computer and the plan was to buy a newer mac but we've been getting along fine without a computer with just using our iphones. So my question, I see that Cisco has the Connect Express app for the iphone, and I've read about all the features it has like changing settings, router features, etc. But I can't find anything on using the app for the initial set up of the router. I'm currently on an older linksys router (set up before we sold the computer) but it's time for a needed upgrade.
Lets get this straight, right off! If I plugged my computer directly to my Comcast Modem, IPv6 works fine on the { url } So I do not think any of this problem is related to my computer
I bought a EA4500 Router so I would be ready for IPv6, and also wanted N as well as the storage USB port. When I got the router, it came I guess with the original release firmware. It looked "Classic", but the box said Smart. I did the firmware upgrade. I could not get a IPv6 from Comcast. IPv4 worked fine.
I then changed to the latest "Classic: firmware, and all started to work. So I decided to try Smart again. Same thing, no IPv6 from Comcast. After being on chat for I think close to 2 hours today and getting no where, I did a reset to start at scratch again. I then got a IPv6 from Comcast. Many moons ago, it was a real hassle to switch devices hooked to a cable modem. At least here you had to power cycle the modem, so I have always cloned my wired Desktop MAC. So when I put it back in, I lost IPv6 from Comcast. Turned off MAC cloning, and I got the IPv6 again. So it looks like there is a bug in the Smart Firmware and MAC cloning since it worked OK with Classic firmware. OK, I could live with no cloning since the issues of yesteryear don't seem to be there in getting a IP from the cable modem.
Then for what ever reason, my computer would not get a valid IPv6 on the LAN from the router. I got some IP, but no Gateway. I tried everything I could think off. And again, plugging the computer directly to the cable modem, IPv6 worked fine. So something is just not right with this router as far as I am concerned.
Also, it seems like navigating through the menus on a local connection (192.168.1.1), I constantly got a message to wait popping up on the screen, for many seconds. If I had no Internet connection it would take forever on some things.
I have spent many hours on this, and am just giving up and going to look at another brand product. I don't need or want the "Smart" functions anyway.
Have just changed my E4200 to EA4500 but can my computer has not IE access. Both router has same settings and the mac adr are both in the modem at the local cabel firm.
I just now installed a new EA4500 Router. It installed itself automatically without a problem, by running the setup CD. No devices other than my hard wired computer and modem are connected yet.
When I went into Start > Cisco Connect to look around and check it's version, etc., I immediately got a "There's an important update for your router" notice. My concern is not wanting to install The Cloud at this time (although I wouldn't rule it out later). There has not been a trace of it so far.
I currently have Firmware Version: 2.0.36.126507 and Software Version: 1.4.12100.0. What this Important Update may be? Is it the "dreaded" Cloud? I'd rather avoid the whole rolling back to pre-Cloud issue for now, if possible.
I got my ea4500 all set up. never had a media servor or anything like that, figured this would be an easier way. when i hook up my exteral i can find it but i can only view the files in windows media player. how can i just browse the folders manually? WMP doesnt let me browse the folders as they actually are on the HDD which is such a pain in the **bleep**.
shows a device in "network infrastructure" but it says problem sending command to the program when i click that. i dont want to have to view the HDD in WMP as a media device...
My new EA4500 (fw ver 2.0.36) won't obtain an IP from a Brighthouse TM502G cable modem. The EA4500 replaced a functioning WRT54G which would obtain an IP from the ISP. I've tried upgrading firmware and have used both straight-through and crossover cables between the EA4500 & TM502G to no avail. The EA4500 would issue IPs to it's clients, but not obtain one from it's TM502G. At the moment, all 3 are daisy-chained together with the old WRT54G in the middle in order to make the EA4500 work. Both WiFi and LAN ports function in this configuration.
I downloaded and installed inSSider for Windows and, under the 2.4 Ghz tab, I can clearly see the Router SSID, on Channel 6, exactly as configuredbin the Router. However on the 5 Ghz tab, nothing? I can see Channels 36, 40, 44, 48, 52 and so on BUT no trace of any wireless signal here?I carefully reviewed the wireless settings options and it is indeed enabled.
In my apartment, I can receive the wireless signal of free scholl wireless, which is accessable without user name and password. Although the signal is not good, but we used to use a router EA3000 to relay the signal. Now my roommate is leaving with this this router. So I bought EA4500 and try to do the similar job. However, I find that the configurations on 192.168.1.1 are different between EA3000 and EA4500. Many options cannot be found in the EA4500 page, such as the wireless client.
I recently got an EA4500 from a friend and when I tried to run the Cisco Connect CD on my MacBook it gets to 25% and then stops and says it can't find a router. I've reset, powercycled, unplugged, plugged, searched, and searched but I cant seem to get it to find the router.
I'm hoping to get this router to allow WOL (actually wake on WAN) but it seems to be blocking the necessary broadcast magic packet even though the settings appear correct. It's not critical, but the reason is this: I'd like to shut down the home PC, but when necessary be able to start it up and use a VPN to access any info I need remotely.
From within the LAN, I can verity that WOL works. I have NIC and PCI WOL enabled in the BIOS. The NIC (a Marvel Yukon Gigabit) has WOL enabled as well as "allow this device to wake.." using magic packets under power management. The target machine's local IP is reserved through the EA4500 DHCP Reservation table. Just for troubleshooting, I opened port 9 in windows firewall. More importantly, I have ports 7-9 forwarded to my target LAN address. Single port forwarding... it just has been less reliable (?). I'm using a mask of 255.255.255.128 in order to enable broadcasting on .127 at some point as it seems it must be necessary. Broadcasting on .255 is not possible, despite some workarounds I found on the web. EA4500 firmware is the latest, 2.0.37. I have turned off the multicast filter and the anonymous internet filters under the security tab.
So, with these settings, I can WOL from inside the network no problem either targeting the LAN address, or by using a dyndns address. So far so good.With these same settings, I can go to WAN using Depicus or the Cloud Connect Pro app over 4G on an iPad. With all these same settings, WOLsniffer confirms the magic packet still getting through over WAN (obviously using the dyndns address). Even better, I can shutdown the target PC and STILL wake it up within a few minutes from WAN. Let me restate that! Wake up over WAN works, but only for the first few minutes after a shutdown.
However, if I wait 20 minutes or so, WOL stops working. If I change the port forwarding to .127, not only does it not work, but WOLsniffer will fail to see the magic packet. My conclusion is that the ARP table is getting purged, which is undertandable, and so the target LAN address isn't in memory. However, frustratingly the EA4500 will not broadcast no matter what settings you use. This limitation is undocumented, and counterintuitive since the software allows you to disable multicast filtering and does not notify you of an error when forwarding to xxx.xxx.xxx.127 with a 255.255.255.128 mask.
Using the FTP server built into the EA4500 firmware. I can get the FTP service to work from some computers outside my home network, but when i try to access the service from a PC within my home network i am unable to connect to the server through the WAN address.
I bought 2 weeks ago a Linksys EA4500 after searching the best Wi-Fi Router all over the net... I choose this cos all over people writed that it was amazing, fast a nd very good coverage all over the house.
Before I had a Buffalo AirStation Dual Band, wich worked perfectly. But since I have several tv and a central NAS whit all films in MKV, I wanted the BEST product for my system, so I choosed Linksys EA4500!
Well, the result is that (when it works it is greate) but sometimes it disconnects and I have to restart it... And second thing that makes me MAD is that the coverage in my house is WORST!! Before my Wi-Fi was present in all the house, now in some parts doesn't work! The position is the exact same of the Buffalo, so it's not a problem of position... I tryed also a router of 40€ and it has a better coverage! How come? how is it possible that a person pays more than 200$ (in Italy it costs 185€) and the result is so BAD??? I'm totaly freak about Linksys now.
I'm in the process of wanting to upgrade my wireless network but I'm not really agreeing to the Cloud Connect, I don't need to have my settings on the internet. I want to manage everything on my own. I've found the following link on the community to be able to put the classic firmware before the cloud connect feature {URL}.
My question now is : If I buy a brand new EA4500, will it still be possible to downgrade to that firmware? No problem with this one? I'm hoping Cisco will continue to publish bug fixing if any to this classic firmware.
I purchased a EA4500 and at first I could connect to it through its default ciscoxxxxx ssid on my laptop which is 2.4GHz only. I upgraded the firmware using the PC utility and now I can't find the 2.4GHz SSID no matter what settings I do. I've disabled and enabled it multiple times, changed it to have no security or with security and enabled and disabled it and renabled it. Nothing seems to work, but for some reason the 5GHz side I can connect to using a 5GHz device. I've also tried disabling the 5GHz side, but still no 2.4GHz.
Just purchased a ea4500 router. Have setup multiple computers/devices already and works great. This computer (HP dv6000 running Win Vista home prem) however will not connect to the internet. It states that it is connected to the router (computer sees router), using the cloud connect app on my iphone i can see this computer, but will not allow access to the internet (local connection only). It works fine with the wired connection. When attempting to use the cloud connect software, it says it was unable to complete the install. Have attempted trying while connected by wire as well, same result. Have deleted the wireless connection and allowed software to find connection, still same result, cannot install. Wireless worked perfectly with previous router (WRT54G) three days ago.
I have a new EA4500 router and I cannot configure it to reach the 450 mbps that is supposed to get.
I have it configured as follows: Dual Band- 2,4 and 5 GHz 2,4 in 20MHz only - 5 GHz in 40 MHz only 2,4 Mixed - 5 Ghz only N WPA2 personal in both Channel - automatic (both)
I have checked that the 5 Ghz network can only use 4 channels: 36, 40, 44, 48. Where are the channels up to 100 (or more)? How to get all the power of the router?
I had a WRT54G2 router and began having trouble with my PS3. It would connect for a few minutes then it would lose the internet connection. I thought maybe it was the router so I have the EA4500 now. The same problem is still happening. I connected all of my other wireless devices to the EA4500 with no problems. The PS3 connects and signs me in and then two or three minutes I'm disconnected. I called Sony and Cisco for assistance but in vain. The PS3 is showing my network has nearly 100% signal strength so that isn't a problem
I recently purchased an EA4500. It started out working really well, but recently I noticed that my speed on my iPhone and iPad has dropped significantly. When I'm in my office where the router is set up, I'm getting around 15 to 20 mb download speed and 5+ upload speed. When I go to my living room about 40 feet away my speed drops to 1mb down and less than 1 up. I expect to see a drop in my performance the further away I get from the router, but this seems really unacceptable to me.
I am bridging my NetComm router to the Linksys EA4500 and it is giving me only 8MBps whereas the line speed is 14MBps. I have tried to connect directly to the netcomm by disabling the EA4500 and I am getting 14MBps. Any way to increase my speed?
I would rather have wireless to wireless . Like I said I have a new EA4500 trying to extended my wireless connection to my back yard still having the same trouble of small to no signal, I have a Belkin N+ Ver.2 that I had been using with the same trouble. I would like to connect the belkin N+ to the EA4500 to extend my wi-fi to my back yard and back half of my house.
New Router - Setup went easy. Create a folder named Media - copy a few formats in only 6 files all less than 2gb in size, 2 x avi (divx/xvid), mp3, mkv, mp4 and flv. All excited I scoot over to the PS 3 - righto we can do this!! Only to see no titles found. Great stuff Go to router - media server - scan - database updated - awesome let's try again! No titles found. Ok?!? Reboot router - reboot ps3. Still frowning - no titles found?
Just bought the EA4500, updated with the latest cloud firmware. but Wan performace is BAD. download with router 31.56Mbps, without approx 120 Mbps, tried changing MTU from auto to 1470 but no succes.
I have a problem with my EA4500. Router permanently rebooting. - router is not visible on the network. Ping to 192.168.1.1 - loss of all packets; - hard reset (30/30/30) does not work.
I'm using the EA4500 router with Cisco Cloud Connect. I've noticed under Devices I'll see devices named "Network Device". They have a generic MAC address with something like "00:00:00:00:2F". They will have an IP that's already assigned to another device.
