I would rather have wireless to wireless . Like I said I have a new EA4500 trying to extended my wireless connection to my back yard still having the same trouble of small to no signal, I have a Belkin N+ Ver.2 that I had been using with the same trouble. I would like to connect the belkin N+ to the EA4500 to extend my wi-fi to my back yard and back half of my house.
View 7 RepliesI have the linksys EA4500 now for a few hours and its pissing me off.with my old linksys i got a wireless connection to my Belkin Home Base.this is a usb wifi station.in this usb station there is a seneye. this is a machine to protect my reef tank.i cant make a wireless connection to my Belkin home base..
View 1 Replies View RelatedConnect my primary router EA4500 to another EA4500?
I tried and followed the steps provided here but it doesn't work at all for the Xth time already.
The first router installed and ran flawlessly in minutes. The second one has failed to work in bridge mode for 3 hours now.
I am trying long distance to set up above router. Router communicates fine with laptop and wifi printer but when she tries to connect her iphone (I think iphone4), phone states that password is incorrect. She is using the same password that she used for the printer and laptop which is the router default one which is a series of mixed numbers and letters.
View 1 Replies View RelatedI have been trying to connect my smart tv to my wireless network for the last 3 weeks. It connects intermittently but the connection is always lost within a few minutes to a couple hours. I have turned off all of the firewalls, and all other devices connect fine. It is an ea4500 running on updated firmware and a Samsung 6900 smart tv. The connection works if I run an ehternet cable to it oith from the modem as well as from the router, but it does not work over the wireless connection.
View 7 Replies View RelatedI just purchased a Linksys EA 4500.I set up the wifi properly, with laptops, tablets, smartphones and printer. The wifi network worked fine for a couple of days.But now one of the laptop "refuses" to see the Linksys wifi network. The other devices are still connected and running regularly.
The notebook that does not connect anymore is an ACER 5740DG with an Atheros Network adapter and Windows 7 installed. This notebook is otherwise running fine.At the beginning it was connecting ok and we never had any problem at all with the previous router Belkin_N+_7991AC, that I changed just for speed.
Now the Linksys network is simply not visible to such notebook in the "Available Connections List" that I get clicking on the WiFi icon in the bottom right, while a number of other wifi networks (not mine) are clearly visible. Of course I restarted the notebook properly. For one time I got the visibility of the Linksys, I entered the password and then it was not possible to see the network anymore.No error message from Smart WiFi software.
I have a Linksys wireless-G connected to my main computer and modem. We live in an extremely long house and I am attempting to connect a Belkin wireless-G router so that the signal is stronger on the other side of the house.
View 1 Replies View RelatedI can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router?
View 2 Replies View RelatedWhere do I find View Available Wireless Networks in Windows 7?In XP there is a network icon in system tray to right click but what about Windows 7?
View 2 Replies View RelatedI'm looking to connect a wired PC to the internet.
1. Linksys WAG160N Main router
2. Belkin F5D9630-4 v6
My first question.. is it possible to connect wirelessly from the Linksys to the Belkin, then run an ethernet cable from the Belkin to the PC? If this is possible, then can I use the Belkin to also extend my wireless range?The alternative is to build a Powerline network but I wouldn't get the wireless extension without forking out for more kit.
I am having a bit of trouble. I have a Belkin router (this is irrelevant) across the house, which is extended by the Belkin wireless bridge/repeater in my bedroom. The device in my room boosts my WiFi signal for my MacBook and iPhone, and the LAN (ethernet) port on the back allows my Debian server to connect to the network and internet. I have a Linksys switch that I wish to use, for I have another computer that requires an ethernet connection. Here is what happened:Debian 1 is connected via ethernet, no problem.I shut it down, unplug cable. Run cable from bridge to switch's uplink.Plug another ethernet cable into port one on switch, run it to Debian 1.
View 1 Replies View RelatedI've looked all over the internet for this and can't find a definate answer. Waited for live chat and got kicked before I got to talk to someone... Just sold my computer and the plan was to buy a newer mac but we've been getting along fine without a computer with just using our iphones. So my question, I see that Cisco has the Connect Express app for the iphone, and I've read about all the features it has like changing settings, router features, etc. But I can't find anything on using the app for the initial set up of the router. I'm currently on an older linksys router (set up before we sold the computer) but it's time for a needed upgrade.
View 3 Replies View RelatedI got my ea4500 all set up. never had a media servor or anything like that, figured this would be an easier way. when i hook up my exteral i can find it but i can only view the files in windows media player. how can i just browse the folders manually? WMP doesnt let me browse the folders as they actually are on the HDD which is such a pain in the **bleep**.
shows a device in "network infrastructure" but it says problem sending command to the program when i click that. i dont want to have to view the HDD in WMP as a media device...
My new EA4500 (fw ver 2.0.36) won't obtain an IP from a Brighthouse TM502G cable modem. The EA4500 replaced a functioning WRT54G which would obtain an IP from the ISP. I've tried upgrading firmware and have used both straight-through and crossover cables between the EA4500 & TM502G to no avail. The EA4500 would issue IPs to it's clients, but not obtain one from it's TM502G. At the moment, all 3 are daisy-chained together with the old WRT54G in the middle in order to make the EA4500 work. Both WiFi and LAN ports function in this configuration.
View 1 Replies View RelatedI downloaded and installed inSSider for Windows and, under the 2.4 Ghz tab, I can clearly see the Router SSID, on Channel 6, exactly as configuredbin the Router. However on the 5 Ghz tab, nothing? I can see Channels 36, 40, 44, 48, 52 and so on BUT no trace of any wireless signal here?I carefully reviewed the wireless settings options and it is indeed enabled.
View 1 Replies View RelatedCan we get a forum title just for the EA4500?
View 1 Replies View RelatedIn my apartment, I can receive the wireless signal of free scholl wireless, which is accessable without user name and password. Although the signal is not good, but we used to use a router EA3000 to relay the signal. Now my roommate is leaving with this this router. So I bought EA4500 and try to do the similar job. However, I find that the configurations on 192.168.1.1 are different between EA3000 and EA4500. Many options cannot be found in the EA4500 page, such as the wireless client.
View 4 Replies View RelatedI recently got an EA4500 from a friend and when I tried to run the Cisco Connect CD on my MacBook it gets to 25% and then stops and says it can't find a router. I've reset, powercycled, unplugged, plugged, searched, and searched but I cant seem to get it to find the router.
View 3 Replies View RelatedI'm hoping to get this router to allow WOL (actually wake on WAN) but it seems to be blocking the necessary broadcast magic packet even though the settings appear correct. It's not critical, but the reason is this: I'd like to shut down the home PC, but when necessary be able to start it up and use a VPN to access any info I need remotely.
From within the LAN, I can verity that WOL works. I have NIC and PCI WOL enabled in the BIOS. The NIC (a Marvel Yukon Gigabit) has WOL enabled as well as "allow this device to wake.." using magic packets under power management. The target machine's local IP is reserved through the EA4500 DHCP Reservation table. Just for troubleshooting, I opened port 9 in windows firewall. More importantly, I have ports 7-9 forwarded to my target LAN address. Single port forwarding... it just has been less reliable (?). I'm using a mask of 255.255.255.128 in order to enable broadcasting on .127 at some point as it seems it must be necessary. Broadcasting on .255 is not possible, despite some workarounds I found on the web. EA4500 firmware is the latest, 2.0.37. I have turned off the multicast filter and the anonymous internet filters under the security tab.
So, with these settings, I can WOL from inside the network no problem either targeting the LAN address, or by using a dyndns address. So far so good.With these same settings, I can go to WAN using Depicus or the Cloud Connect Pro app over 4G on an iPad. With all these same settings, WOLsniffer confirms the magic packet still getting through over WAN (obviously using the dyndns address). Even better, I can shutdown the target PC and STILL wake it up within a few minutes from WAN. Let me restate that! Wake up over WAN works, but only for the first few minutes after a shutdown.
However, if I wait 20 minutes or so, WOL stops working. If I change the port forwarding to .127, not only does it not work, but WOLsniffer will fail to see the magic packet. My conclusion is that the ARP table is getting purged, which is undertandable, and so the target LAN address isn't in memory. However, frustratingly the EA4500 will not broadcast no matter what settings you use. This limitation is undocumented, and counterintuitive since the software allows you to disable multicast filtering and does not notify you of an error when forwarding to xxx.xxx.xxx.127 with a 255.255.255.128 mask.
How do I enable WDS on my new EA4500 ?
View 3 Replies View RelatedWas thinking to buy this router but I am not sure if it supports magic packets in order to use wake on lan on PCss and NAS
View 3 Replies View RelatedI really want to have a password on my wifi, but I cant control it when all it keeps asking me is for a CD I have a EA4500
View 1 Replies View RelatedUsing the FTP server built into the EA4500 firmware. I can get the FTP service to work from some computers outside my home network, but when i try to access the service from a PC within my home network i am unable to connect to the server through the WAN address.
View 1 Replies View RelatedI bought 2 weeks ago a Linksys EA4500 after searching the best Wi-Fi Router all over the net... I choose this cos all over people writed that it was amazing, fast a nd very good coverage all over the house.
Before I had a Buffalo AirStation Dual Band, wich worked perfectly. But since I have several tv and a central NAS whit all films in MKV, I wanted the BEST product for my system, so I choosed Linksys EA4500!
Well, the result is that (when it works it is greate) but sometimes it disconnects and I have to restart it... And second thing that makes me MAD is that the coverage in my house is WORST!! Before my Wi-Fi was present in all the house, now in some parts doesn't work! The position is the exact same of the Buffalo, so it's not a problem of position... I tryed also a router of 40€ and it has a better coverage! How come? how is it possible that a person pays more than 200$ (in Italy it costs 185€) and the result is so BAD??? I'm totaly freak about Linksys now.
I'm in the process of wanting to upgrade my wireless network but I'm not really agreeing to the Cloud Connect, I don't need to have my settings on the internet. I want to manage everything on my own. I've found the following link on the community to be able to put the classic firmware before the cloud connect feature {URL}.
My question now is : If I buy a brand new EA4500, will it still be possible to downgrade to that firmware? No problem with this one? I'm hoping Cisco will continue to publish bug fixing if any to this classic firmware.
I purchased a EA4500 and at first I could connect to it through its default ciscoxxxxx ssid on my laptop which is 2.4GHz only. I upgraded the firmware using the PC utility and now I can't find the 2.4GHz SSID no matter what settings I do. I've disabled and enabled it multiple times, changed it to have no security or with security and enabled and disabled it and renabled it. Nothing seems to work, but for some reason the 5GHz side I can connect to using a 5GHz device. I've also tried disabling the 5GHz side, but still no 2.4GHz.
View 4 Replies View RelatedJust purchased a ea4500 router. Have setup multiple computers/devices already and works great. This computer (HP dv6000 running Win Vista home prem) however will not connect to the internet. It states that it is connected to the router (computer sees router), using the cloud connect app on my iphone i can see this computer, but will not allow access to the internet (local connection only). It works fine with the wired connection. When attempting to use the cloud connect software, it says it was unable to complete the install. Have attempted trying while connected by wire as well, same result. Have deleted the wireless connection and allowed software to find connection, still same result, cannot install. Wireless worked perfectly with previous router (WRT54G) three days ago.
View 6 Replies View RelatedI have a new EA4500 router and I cannot configure it to reach the 450 mbps that is supposed to get.
I have it configured as follows:
Dual Band- 2,4 and 5 GHz
2,4 in 20MHz only - 5 GHz in 40 MHz only
2,4 Mixed - 5 Ghz only N
WPA2 personal in both
Channel - automatic (both)
I have checked that the 5 Ghz network can only use 4 channels: 36, 40, 44, 48. Where are the channels up to 100 (or more)? How to get all the power of the router?
I just installed a new EA4500 and the range is terrible. How can I increase it?
View 1 Replies View RelatedI had a WRT54G2 router and began having trouble with my PS3. It would connect for a few minutes then it would lose the internet connection. I thought maybe it was the router so I have the EA4500 now. The same problem is still happening. I connected all of my other wireless devices to the EA4500 with no problems. The PS3 connects and signs me in and then two or three minutes I'm disconnected. I called Sony and Cisco for assistance but in vain. The PS3 is showing my network has nearly 100% signal strength so that isn't a problem
View 4 Replies View RelatedI recently purchased an EA4500. It started out working really well, but recently I noticed that my speed on my iPhone and iPad has dropped significantly. When I'm in my office where the router is set up, I'm getting around 15 to 20 mb download speed and 5+ upload speed. When I go to my living room about 40 feet away my speed drops to 1mb down and less than 1 up. I expect to see a drop in my performance the further away I get from the router, but this seems really unacceptable to me.
View 1 Replies View RelatedI am bridging my NetComm router to the Linksys EA4500 and it is giving me only 8MBps whereas the line speed is 14MBps. I have tried to connect directly to the netcomm by disabling the EA4500 and I am getting 14MBps. Any way to increase my speed?
View 3 Replies View RelatedI can't log into the router. Get 502 Bad Gateway - Model EA4500; Have a USB Drive connected to the router.
Power-off and Powered-Back on - no change.