Belkin Wireless Router Setup Connecting In Windows 7?
Sep 2, 2011Where do I find View Available Wireless Networks in Windows 7?In XP there is a network icon in system tray to right click but what about Windows 7?
View 2 RepliesWhere do I find View Available Wireless Networks in Windows 7?In XP there is a network icon in system tray to right click but what about Windows 7?
View 2 RepliesThe other day my wifi was working the all of a sudden today my wifi stopped and said it's disconnected. On the router the only non-green light says "LINK"and it keeps flashing orange. How do i fix this because i cannot tweet pics from my phone without this working...
View 1 Replies View RelatedI'am having problems when connecting to the internet. I'am running Win7 64-bit and i have Belkin USB wireless adapter( Belkin surf N150) When i first bought the adapter it didnt connect to internet, so i though it is not working and i got it replaced. I got the same problem with the second one as well, and then i have changed the wireless mode on the device manager from: IEEE 802.11b/g/n to: IEEE 802.11b and eventually i have connected to internet without any errors, but in this mode the internet is unbelievably slow which is very slow when compared to another wireless mode where i have changed it from. So my question is why i can't connect to internet IEEE 802.11b/g/n in this mode? The weird thing is that some times it connects to internet with no error and dissconnects again in a short while. Also when the windows tries to repair it, i get this report:
Windows Network Diagnostics Publisher details
Issues found
Problem with wireless adapter or access pointProblem with wireless adapter or access point Not fixed
Refer to Windows Help and Support for more information about wireless connectivity problems Failed
Reset the wireless adapter Completed
Investigate router or access point issues Completed
[code]....
I have belkin f5d7632-4 router, it works ok wirelessley with my smartphone when it is 'open' but setting a passphrase on the router stops access from the phone even with the correct passphrase, other devices act the same as though it is the wrong passphrase
View 1 Replies View RelatedI can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router?
View 2 Replies View RelatedI would rather have wireless to wireless . Like I said I have a new EA4500 trying to extended my wireless connection to my back yard still having the same trouble of small to no signal, I have a Belkin N+ Ver.2 that I had been using with the same trouble. I would like to connect the belkin N+ to the EA4500 to extend my wi-fi to my back yard and back half of my house.
View 7 Replies View RelatedSo i got time warner cable and internet but for some odd reason a "wired" connection works perfectly fine but i cannot get any life out of my belkin n750 DB wireless router. ive hooked it all up modem to router to pc nothing so i reset everything still nothing
View 3 Replies View RelatedI have a Linksys wireless-G connected to my main computer and modem. We live in an extremely long house and I am attempting to connect a Belkin wireless-G router so that the signal is stronger on the other side of the house.
View 1 Replies View RelatedI'm trying to set up a wired ethernet connection to a wireless Belkin router. The wireless router works fine - I have several devices that will connect wireless with no problem. The hp desktop I'm trying with the wired connection is showing that the ethernet connection is working, but it's not asking for the wireless network name or security code, and the internet will not work?I made sure the desktop was set up to automatically obtain IP addresses, then I did the "ipconfig /flushdns / ipconfig /release and ipconfig /renew commands, but it still won't work.
View 5 Replies View RelatedMy Belkin N150 wireless router monitor has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you us a solution is available.I can not figure out why my wireless router doesn't work sometimes.I need to be able to access this to get to the router settings. I don't know if my wireless is being highjacked or what.
View 2 Replies View RelatedMy computer sees my network, but I can't connect to the internet wirelessly. If I plug in the Ethernet cable from the modem I can access the internet. So, I've narrowed this down to something with my router.
OS: WIN7
Router: Belkin N750 DB N+
Steps taken:Modem and router have been shut down and restarted.Router has been returned to factory settings and reconfigured.Validated with my ISP there are no issues with my internet service. Router software has been uninstalled, reinstalled I do not use McAfee. I've run a full virus scan, a full malware scan and just for good measure, a defrag. I've checked my firewall.
i am find the belkin wireless security key.
View 2 Replies View RelatedI am using a Belkin Surf wireless modem/router with this computer (Vista) no problems at all.When I boot up my HTPC (Windows 7) all is fine until it tries to connect with the Belkin Surf. Then its Blue Screen of Death and no joy. If I turn off the modem, the HTPC boots up perfectly normally. Turn the modem on and as soon as I try to recognise the home network, it crashes again.
View 2 Replies View RelatedHow do I setup my Belkin F7D1301 with a 16 port 10/100 switch so I can use the wireless on the Belkin and have the 16 port switch for my hard wires?
View 1 Replies View RelatedMy new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.
[URL]
I've had for several years very good experience with the WRT54GL. Based on that experience I upgraded to a e4200.But so far it's not living up to my expectations (media server not probably working with external harddisk, no advanced logging of incoming/outgoing traffic, connection problems) and I'm getting pretty frustrated with it.Problem right now is that one of my laptops with Windows 7 is often not connecting correctly to the wireless network of the e4200. It's giving a "unidentified network" error. Rebooting computer and router is not working. The computer is (always) reliable connecting to another wireless network in my home. It seems the DHCP is not working properly?
View 1 Replies View RelatedI have recently bought a Belkin N300 Wireless N Modem-Router and am unable to connect it to the internet. My laptop registers the router but the router won't connect to the internet. The router also is blinking a red light.
View 2 Replies View RelatedI have a desktop computer connected to a modem and a wireless Belkin router. I bought a Belkin Surf&Share wireless USB adapter so that I could move the desktop elsewhere in the house and still connect to the internet. When I disconnect the computer from the router, the wireless light on the router turns red and I can't connect.
View 1 Replies View RelatedWe have a router operating in front of one computer which is separate from the rest of the network. Most of the time it operates fine but we find sometimes it loses connectivity, both internet connectivity from the machine and access to the machine remotely. This is not acceptable as the machine is operating rather critical processes and ideally it should be available 100% of the time.
I cannot determine if the fault lies with Windows, the router or the network.
ADSL Connection Type PPPoE/PPPoA
Firmware v1.06
Port forwarding None
DNS Auto
Firewall None
DMZ 192.168.1.2
Uninstalled McAfee. Installed Frontier Secure, which uses the Windows Firewall. Received Windows Security Alert message that my Belkin USB Storage Center (where the printer is listed) was being blocked, and would I like to allow access. I selected "Allow Access". Printer has not been connecting all week. No error messages - it tries to connect, and then just stops. Can't find issues with the router or the printer - only with the firewall. Everything looks the way I assume it should - the printer is listed in the Belkin storage center. The Belkin storage center is listed in the firewall. There is no tech support for the firewall. There is no tech support for the printer.
View 4 Replies View RelatedI am having trouble connecting router to my pc hp pavillion with windows vista using verizon internet.
View 1 Replies View RelatedI have a problem with my Belkin router that is ruining any online gaming experience I want to have. Any time I try to play a game on my PC, I have to deal with STRICT NAT. On my router setup page I have all security features off, UPnP is enabled, and i'm pretty sure I have my computer in a DMZ. (As far as I know a DMZ'd computer should have an Open Nat right?)When I use run>cmd>ipconfig it says my ip address is 192.168.2.2, which is the same exact thing that is in my DMZ box, but it isn't appearing to work.Does anybody have an idea how to set up a successful DMZ on a belkin router?
View 4 Replies View RelatedI have just purchased a new EA3500 router and have fairly painlessly managed to get my desktop (running Windows XP), my lap top (running Windows 7), ipads 1 and 2 and blackberry all to connect to the wireless hub. I even have it talking to a WD 1T external hard drive.
BUT try as I might I can't get an old sony vaio running windows 2000 professional to connect to the internet. It talkes to the box and even allows the lap top to hop on as a guest but it goes through to a guest sign on web page and no matter what combination of passwords (i am sure i have the write guest sign on) it just refuses to actually connect. I never had a problem connection to our previous wireles router.
I have a Wimax internet connection via an ethernet cable from a small roof top receiver dish. Inside the house the cable (RJ45) is plugged into the POE slot on one side of a small electrically powered black box, and from the other side, an ethernet cable (RJ45), connects to my PC. I want to share my internet connection with my HTC mobile and would prefer to make use of an existing Belkin 54g ADSL2 modem/wireless router (Belkin F5D7633) if I can. As this router's incoming port is specifically for ADSL my internet RJ45 cable can not plug into it. I have been advised that I can still utilise the router part of the Belkin though, using my PC as an access point, by plugging the ethernet cable from the PC side of the little black box into LAN 1 on the router, then joining the PC to LAN 2 of the router with another ethernet cable.I did not alter the configuration of the Belkin at all (having reset factory defaults beforehand), mainly because although I could access the internet from my PC and my mobile, I could not access the IP address of the router, presumably because the properties of the local area connection on my PC remained unchanged with the IP address (172.168.1.149), Subnet Mask (255.255.255.0), Default Gateway (172.168.1.1) and 3 DNS addresses (172.168.1.1) (10.30.0.1) (8.8.8.8) as they were before hooking up the Belkin. The IP address the mobile received through WIFI on connecting to the Belkin was 172.168.1.148
I was not unduly concerned about not being able to access the configuration of the router as everything was working as I had hoped it would and even when I powered off my PC I still had internet access on my mobile. On rebooting the PC, however, I found that the router changed the DNS addresses on the PC to 2 only, both identical (192.168.2.1) and the IP on the mobile was allocated 192.168.2.2 Although I could still access the internet on my PC, I no longer had access from my mobile although the WIFI connection to the Belkin showed as being 'excellent'. When I did a 'repair' of my internet connection, hoping to revert to a fully operative state, the PC configuration changed again as follows: IP address becomes that of the router (192.168.2.1), Subnet Mask (255.255.255.0), Default Gateway (192.168.2.1), 2 DNS addresses (192.168.2.1) and the IP address allocated to my mobile remains (192.168.2.2) This configuration means I have no internet access from either PC or phone, but CAN access the router configuration. I restored a usable operating state by unplugging the power from the router, transposing the cables in the LAN ports on the router (swapped cable from LAN1 to LAN2 and vice versa), turned off WIFI on mobile and waited a minute or two. When I powered the router back up and switched on mobile WIFI again, everything was restored to the original working state and I have, once again, access to internet on both PC and mobile. It is very frustrating, however, to keep performing this ritual and I wonder if any of you more technically minded, know a way to work around this, perhaps by manually changing the configuration of PC or router?
I've got a Belkin F5D8236-4 wireless router. I've had no trouble connecting three laptops to it, but I've completely failed with my HTC smartphone and a friend has failed with a iPhone, I've also failed with an iPod. I've just got a Nexus 7, for my birthday, and that won't connect either! All devices find the network, they just don't connect!
View 6 Replies View RelatedI'm unable to access the web setup screen from 4 different windows machines running IE 9 or Firefox (various combinations of wireless, wired, etc.). When I get to the certificate error and hit the "yes, i understand, continue", it comes back with a 'can't be reached' page and looking into the details says the 'connection was dropped'. However If I connect from a MacBook / safari, I'm able to reach the page fine (and admin the router).
Using a wrt610n.I am connected to the router, the ip address hasn't changed, the password hasn't changed.I can use the router & connect to the internet.I have the router set to require HTTPS, but switching it to allow HTTP doesn't work. Both Wired & Wireless Win 7 / IE9 machines can't connect.Tried setting the router ip address to 'trusted' zone in IE. Tried setting the router ip address to the 'compatibility' mode in IE. Tried using latest version of Firefox with the same results.
Belkin Setup / Router monitor application has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
View 1 Replies View RelatedI am having pentium p3 zenith make,window xp sp3 is the operating system. Belkin router N150 is being used.,I am able to get connection through this router on other p4 pc of my friend.,but when I try to connect to my pc.,belkin router set up do not display.,and diagnostic network connection ,indicate that error 12007 could not connect to HTTP,FTP etc., IE 8 and mozilla firefox are installed and both give the same error i.e. connection to internet could not be established
Quote:
Windows IP Configuration
Host Name . . . . . . . . . . . . : home-1d64a843b7
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes[code].....
I recently purchased a new Belkin N wireless router, model number (F5D8236-4 V3), i am however trying to connect this router to my old Belkin G wireless Modem Router (F5D7632-4 Ver7000uk).Now i can't seem to get the N router to connect to the internet-after much faffing about i can get all the LED lights to turn blue-bar the wireless which blinks amber (i did this by turning the DHCP server off, and by using the same WEP code). I get limited connectivity wirelessly and wired, which basically might aswell just say no connection.
Taking the N router out of the equation, the g router can connect to the internet wired (it no longer seems to work wirelessly, and had a horrible range on it anyway). I use a PPPoE connection-all my ISP details are correct.how i can get the N Router to work wirelessly and wired.
I am looking at buying the EA6500 router. However, before I make the investment into buying this router, I need to know some basic information first.
1. I want to setup the EA6500 to accept FTP requests to my Windows Home Server. Yes or No?
2. Remote access to the EA6500, Yes or No? i am aware of the security risks
3. I need to setup Port forwarding on the EA6500. I assume I can?
4. Manage a Kindle Fire and other wireless devices?
how do i secure a belkin router with windows 7
View 1 Replies View RelatedCannot connect to Linksys Router 192.168.1.1 Webpage, do not get login setup screen.
View 1 Replies View RelatedI managed to setup a 1721 router as a vpn server connecting to it using a cisco vpn client however altough I am obtaining an ip address as defined in the dhcp pool I am unable to communicate with both the remote network and also I have no internet as soon as I connect.
View 5 Replies View Related