Wifi Isn't Connecting Although The Belkin Router Is Setup
Nov 10, 2012
The other day my wifi was working the all of a sudden today my wifi stopped and said it's disconnected. On the router the only non-green light says "LINK"and it keeps flashing orange. How do i fix this because i cannot tweet pics from my phone without this working...
View 1 Replies
ADVERTISEMENT
Sep 2, 2011
Where do I find View Available Wireless Networks in Windows 7?In XP there is a network icon in system tray to right click but what about Windows 7?
View 2 Replies
View Related
Aug 26, 2012
I've got a Belkin F5D8236-4 wireless router. I've had no trouble connecting three laptops to it, but I've completely failed with my HTC smartphone and a friend has failed with a iPhone, I've also failed with an iPod. I've just got a Nexus 7, for my birthday, and that won't connect either! All devices find the network, they just don't connect!
View 6 Replies
View Related
Feb 10, 2013
Is there a way to quickly disable Wi-Fi on a N-150 from the router setup page? I have looked on my admin page but I don't see it. I just want to be able to turn the radio on and off from the PC that is connected via ethernet.
View 3 Replies
View Related
Dec 1, 2012
On Page 16 of my N600 DB manual it says that below the "Router Status Light" and above the "WPS" letters there is a "Wi-Fi Protected Setup (WPS) Light and Button". When I look at my router all I see in this space is a raised rectangular plastic strip. Should I have a light and button there?
View 1 Replies
View Related
Sep 20, 2012
I would like to know if I have wifi connect with my verizon internet.
View 2 Replies
View Related
Apr 26, 2013
How do I setup my Belkin F7D1301 with a 16 port 10/100 switch so I can use the wireless on the Belkin and have the 16 port switch for my hard wires?
View 1 Replies
View Related
Sep 1, 2012
I have recently bought a Belkin N300 Wireless N Modem-Router and am unable to connect it to the internet. My laptop registers the router but the router won't connect to the internet. The router also is blinking a red light.
View 2 Replies
View Related
Dec 6, 2011
I have a desktop computer connected to a modem and a wireless Belkin router. I bought a Belkin Surf&Share wireless USB adapter so that I could move the desktop elsewhere in the house and still connect to the internet. When I disconnect the computer from the router, the wireless light on the router turns red and I can't connect.
View 1 Replies
View Related
Feb 2, 2013
I have belkin f5d7632-4 router, it works ok wirelessley with my smartphone when it is 'open' but setting a passphrase on the router stops access from the phone even with the correct passphrase, other devices act the same as though it is the wrong passphrase
View 1 Replies
View Related
Nov 26, 2012
I can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router?
View 2 Replies
View Related
Nov 2, 2012
Uninstalled McAfee. Installed Frontier Secure, which uses the Windows Firewall. Received Windows Security Alert message that my Belkin USB Storage Center (where the printer is listed) was being blocked, and would I like to allow access. I selected "Allow Access". Printer has not been connecting all week. No error messages - it tries to connect, and then just stops. Can't find issues with the router or the printer - only with the firewall. Everything looks the way I assume it should - the printer is listed in the Belkin storage center. The Belkin storage center is listed in the firewall. There is no tech support for the firewall. There is no tech support for the printer.
View 4 Replies
View Related
Aug 31, 2011
I am having trouble connecting router to my pc hp pavillion with windows vista using verizon internet.
View 1 Replies
View Related
May 13, 2012
I would rather have wireless to wireless . Like I said I have a new EA4500 trying to extended my wireless connection to my back yard still having the same trouble of small to no signal, I have a Belkin N+ Ver.2 that I had been using with the same trouble. I would like to connect the belkin N+ to the EA4500 to extend my wi-fi to my back yard and back half of my house.
View 7 Replies
View Related
Jan 15, 2012
I have a problem with my Belkin router that is ruining any online gaming experience I want to have. Any time I try to play a game on my PC, I have to deal with STRICT NAT. On my router setup page I have all security features off, UPnP is enabled, and i'm pretty sure I have my computer in a DMZ. (As far as I know a DMZ'd computer should have an Open Nat right?)When I use run>cmd>ipconfig it says my ip address is 192.168.2.2, which is the same exact thing that is in my DMZ box, but it isn't appearing to work.Does anybody have an idea how to set up a successful DMZ on a belkin router?
View 4 Replies
View Related
Nov 4, 2012
So i got time warner cable and internet but for some odd reason a "wired" connection works perfectly fine but i cannot get any life out of my belkin n750 DB wireless router. ive hooked it all up modem to router to pc nothing so i reset everything still nothing
View 3 Replies
View Related
Mar 12, 2013
I have a Wimax internet connection via an ethernet cable from a small roof top receiver dish. Inside the house the cable (RJ45) is plugged into the POE slot on one side of a small electrically powered black box, and from the other side, an ethernet cable (RJ45), connects to my PC. I want to share my internet connection with my HTC mobile and would prefer to make use of an existing Belkin 54g ADSL2 modem/wireless router (Belkin F5D7633) if I can. As this router's incoming port is specifically for ADSL my internet RJ45 cable can not plug into it. I have been advised that I can still utilise the router part of the Belkin though, using my PC as an access point, by plugging the ethernet cable from the PC side of the little black box into LAN 1 on the router, then joining the PC to LAN 2 of the router with another ethernet cable.I did not alter the configuration of the Belkin at all (having reset factory defaults beforehand), mainly because although I could access the internet from my PC and my mobile, I could not access the IP address of the router, presumably because the properties of the local area connection on my PC remained unchanged with the IP address (172.168.1.149), Subnet Mask (255.255.255.0), Default Gateway (172.168.1.1) and 3 DNS addresses (172.168.1.1) (10.30.0.1) (8.8.8.8) as they were before hooking up the Belkin. The IP address the mobile received through WIFI on connecting to the Belkin was 172.168.1.148
I was not unduly concerned about not being able to access the configuration of the router as everything was working as I had hoped it would and even when I powered off my PC I still had internet access on my mobile. On rebooting the PC, however, I found that the router changed the DNS addresses on the PC to 2 only, both identical (192.168.2.1) and the IP on the mobile was allocated 192.168.2.2 Although I could still access the internet on my PC, I no longer had access from my mobile although the WIFI connection to the Belkin showed as being 'excellent'. When I did a 'repair' of my internet connection, hoping to revert to a fully operative state, the PC configuration changed again as follows: IP address becomes that of the router (192.168.2.1), Subnet Mask (255.255.255.0), Default Gateway (192.168.2.1), 2 DNS addresses (192.168.2.1) and the IP address allocated to my mobile remains (192.168.2.2) This configuration means I have no internet access from either PC or phone, but CAN access the router configuration. I restored a usable operating state by unplugging the power from the router, transposing the cables in the LAN ports on the router (swapped cable from LAN1 to LAN2 and vice versa), turned off WIFI on mobile and waited a minute or two. When I powered the router back up and switched on mobile WIFI again, everything was restored to the original working state and I have, once again, access to internet on both PC and mobile. It is very frustrating, however, to keep performing this ritual and I wonder if any of you more technically minded, know a way to work around this, perhaps by manually changing the configuration of PC or router?
View 3 Replies
View Related
Jan 1, 2011
I have a Linksys wireless-G connected to my main computer and modem. We live in an extremely long house and I am attempting to connect a Belkin wireless-G router so that the signal is stronger on the other side of the house.
View 1 Replies
View Related
Feb 24, 2011
I'm trying to set up a wired ethernet connection to a wireless Belkin router. The wireless router works fine - I have several devices that will connect wireless with no problem. The hp desktop I'm trying with the wired connection is showing that the ethernet connection is working, but it's not asking for the wireless network name or security code, and the internet will not work?I made sure the desktop was set up to automatically obtain IP addresses, then I did the "ipconfig /flushdns / ipconfig /release and ipconfig /renew commands, but it still won't work.
View 5 Replies
View Related
Jun 29, 2011
Belkin Setup / Router monitor application has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
View 1 Replies
View Related
Dec 21, 2011
My Belkin N150 wireless router monitor has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you us a solution is available.I can not figure out why my wireless router doesn't work sometimes.I need to be able to access this to get to the router settings. I don't know if my wireless is being highjacked or what.
View 2 Replies
View Related
Jan 4, 2013
My computer sees my network, but I can't connect to the internet wirelessly. If I plug in the Ethernet cable from the modem I can access the internet. So, I've narrowed this down to something with my router.
OS: WIN7
Router: Belkin N750 DB N+
Steps taken:Modem and router have been shut down and restarted.Router has been returned to factory settings and reconfigured.Validated with my ISP there are no issues with my internet service. Router software has been uninstalled, reinstalled I do not use McAfee. I've run a full virus scan, a full malware scan and just for good measure, a defrag. I've checked my firewall.
View 1 Replies
View Related
Oct 20, 2012
I am having pentium p3 zenith make,window xp sp3 is the operating system. Belkin router N150 is being used.,I am able to get connection through this router on other p4 pc of my friend.,but when I try to connect to my pc.,belkin router set up do not display.,and diagnostic network connection ,indicate that error 12007 could not connect to HTTP,FTP etc., IE 8 and mozilla firefox are installed and both give the same error i.e. connection to internet could not be established
Quote:
Windows IP Configuration
Host Name . . . . . . . . . . . . : home-1d64a843b7
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes[code].....
View 4 Replies
View Related
Oct 21, 2011
I recently purchased a new Belkin N wireless router, model number (F5D8236-4 V3), i am however trying to connect this router to my old Belkin G wireless Modem Router (F5D7632-4 Ver7000uk).Now i can't seem to get the N router to connect to the internet-after much faffing about i can get all the LED lights to turn blue-bar the wireless which blinks amber (i did this by turning the DHCP server off, and by using the same WEP code). I get limited connectivity wirelessly and wired, which basically might aswell just say no connection.
Taking the N router out of the equation, the g router can connect to the internet wired (it no longer seems to work wirelessly, and had a horrible range on it anyway). I use a PPPoE connection-all my ISP details are correct.how i can get the N Router to work wirelessly and wired.
View 6 Replies
View Related
Dec 27, 2011
I have a plain pc and an iPad 2 - my daughter has a Mac laptop - we have a dsl connection to the phone line and a belkin router to connect wirelessly
View 1 Replies
View Related
Dec 8, 2012
Cannot connect to Linksys Router 192.168.1.1 Webpage, do not get login setup screen.
View 1 Replies
View Related
Aug 22, 2011
I managed to setup a 1721 router as a vpn server connecting to it using a cisco vpn client however altough I am obtaining an ip address as defined in the dhcp pool I am unable to communicate with both the remote network and also I have no internet as soon as I connect.
View 5 Replies
View Related
Jun 1, 2012
My Belkin Wifi router which was working fine earlier has stopped working now. It shows a red/orange light and nothing else ( it normally shows a green light ). The light doesn't blink or flash. As a consequence, my wifi devices aren't connecting to the internet, however i can connect via my pc normally through my modem. I have a iball Baton modem and the model number of my wifi router is F7D1301 V1.
View 4 Replies
View Related
Feb 16, 2013
I have and and android tablet I just bought and I can't connect to the internet with my Belkin N300 Router all my computers and smartphone work very good to this router and the phone works with wifi here also. I can't get this tablet to connect to the server I have put in all the ssid and the name of the server. When I try to connect it says connecting, then autherizing and then it does a loop and does not ever change,keeps on doing it. In the little shell that is to change color when connected there is a very small lock showing and I am not sure just what todo about this.
View 3 Replies
View Related
Mar 17, 2011
Can I use a belkin F7D6301 N wireless router to receive wifi? Are there any known firmwares for this model?
View 1 Replies
View Related
Jan 28, 2012
I recently purchased a Belkin Dual Band Router and connected to the internet at our side-house we have connected to the house. I'm getting a poor to fair signal out here. Just to mention, there is a lot of traffic passing at all times of the day and night. Busy highway. Is there a way I can boost my wifi signal without buying an actual wifi booster?
View 5 Replies
View Related
Oct 12, 2011
I've been having this problem with my Belkin router since day 1 when i got it.( not new, got from buddy's place) It's Belkin HI Speed Wifi G router, and what's really frustrating is, everytime i connect to it, I need to manually change the DNS address and switch between 4.2.2.2 & 4.2.2.4 in order to get internet access! Sometimes it even cuts off the internet during a session, without me even disconnecting from the wifi network, where I would again need to switch back and forth to the 2 or 4 ending!
View 3 Replies
View Related
Sep 30, 2011
Connected to time warner we have a belkin 2.4ghz 802.11g g-router. The internet on the main desktop is on and used constantly all day, with 2 laptops and ipad used intermittently. Constantly thorughout the day the internet freezes up and has to be unplugged and restarted though there is no pattern to the freeze, perhaps only be the main desktop may be in use alone, perhaps all the above may be in use. Should I upgrade service from time warner or upgrade my older router.
View 1 Replies
View Related