Belkin N Router Connecting To G Modem/Router?
Oct 21, 2011
I recently purchased a new Belkin N wireless router, model number (F5D8236-4 V3), i am however trying to connect this router to my old Belkin G wireless Modem Router (F5D7632-4 Ver7000uk).Now i can't seem to get the N router to connect to the internet-after much faffing about i can get all the LED lights to turn blue-bar the wireless which blinks amber (i did this by turning the DHCP server off, and by using the same WEP code). I get limited connectivity wirelessly and wired, which basically might aswell just say no connection.
Taking the N router out of the equation, the g router can connect to the internet wired (it no longer seems to work wirelessly, and had a horrible range on it anyway). I use a PPPoE connection-all my ISP details are correct.how i can get the N Router to work wirelessly and wired.
View 6 Replies
ADVERTISEMENT
Jan 24, 2013
How do I hook up a Belkin 750 Router to my modem when modem has only one plug?
View 1 Replies
View Related
Dec 8, 2012
I have linksys router connected to my cable modem. I want to change it Belkin AC900. How can I keep the linksys connected until I have tested set up for Belkin AC900 router.
View 2 Replies
View Related
Dec 10, 2012
I am connecting to internet via motorola modem which gives me approx 6 Mbps download speed when I test it with both speedtest.net and speakeasy.net. Any device that I use connected wirelessly to my Belkin N300 router only acheives about 1.3 MBps of download speed. Is this just the way it is or could I have a router configuration issue or something else?
View 2 Replies
View Related
Jun 1, 2012
I am trying to set up a new Belkin modem/router.I have Internet on all three computers over both ethernet and wireless, but no local network. I think the problem may be IP addresses, but I cannot solve it.The LAN settings in the router now are:
DHCP (.) On
IP Pooling Start 192.168.2.2
IP Pooling End 192.168.2.100
Lease time: forever
LAN/DHCP Client List is empty.With the previous modem the IP addresses of the machines were from 192.168.1.2 upwards, but the new modem considers this range invalid.(This isn't specifically an XP problem as one of the machines is Window-7).
View 19 Replies
View Related
Sep 1, 2012
I have recently bought a Belkin N300 Wireless N Modem-Router and am unable to connect it to the internet. My laptop registers the router but the router won't connect to the internet. The router also is blinking a red light.
View 2 Replies
View Related
Dec 6, 2011
I have a desktop computer connected to a modem and a wireless Belkin router. I bought a Belkin Surf&Share wireless USB adapter so that I could move the desktop elsewhere in the house and still connect to the internet. When I disconnect the computer from the router, the wireless light on the router turns red and I can't connect.
View 1 Replies
View Related
Nov 10, 2012
The other day my wifi was working the all of a sudden today my wifi stopped and said it's disconnected. On the router the only non-green light says "LINK"and it keeps flashing orange. How do i fix this because i cannot tweet pics from my phone without this working...
View 1 Replies
View Related
Oct 11, 2012
My main networking device is the Ericsson T073G HGU ONT, and when I am connecting to the network through the Ethernet there are no problems. However when I connect my Belkin F6D4230-4 router to it (through cable) my router cannot recognize the modem.
View 18 Replies
View Related
Aug 6, 2012
Last week, a big storm rolled through my town while I was out of the area on business. I had a working LAN/WLAN for my home & home office, and the modem I was using got fried by the storm. Strangely enough nothing else was affected..Anyway, I went out and bought an identical modem, and had it set up with Comcast. If I connect directly to the modem, everything works perfectly. But when I try to attach my router to the new modem, I have no connectivity over wifi OR hardwired to the router. According to the status light on the router, it can't find a connected modem.I reset the router back to factory settings, installed the newest firmware, and moved my DHCP pool out of the default range. I then power cycled the whole setup - twice - with no success.
View 5 Replies
View Related
Sep 8, 2012
We have owned a this router for nearly a year now, and recently it has been acting up.Today I added a static connection or something of the like for my Xbox, with the correct ip gateway and subnet mask. Since the restart it has never stopped cycling the boot sequence without end. The download lights cycle and the router light flashes constantly. And I am unable to connect to the router page at 192.168.2.1 So I cannot reset the router, the hardware reset button just momentarily pauses the endless booting process.
View 4 Replies
View Related
Nov 27, 2012
My roommate and I have High speed cable internet and the modem is set up in his room. I bought a n600 belkin router and a usb wireless adapter so my computer in my room will get internet. Only problem is there is only one ethernet port on the modem that the internet provider gave us and of course that is taken up by his computer. How do I hook up the router to the modem and get all this to work so I can get on the internet as soon as possible?
View 1 Replies
View Related
Jan 6, 2011
I have a DSL model from AT&T that gives me 4 ports and I have a Belkin Wireless router that gives me another 4 ports. BUT, the computers on the AT&T modem cannot see the computers on the Belkin router. Should I set the address in the Belkin router to the one the AT&T modem has?
View 7 Replies
View Related
Nov 26, 2012
I can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router?
View 2 Replies
View Related
Nov 2, 2012
Uninstalled McAfee. Installed Frontier Secure, which uses the Windows Firewall. Received Windows Security Alert message that my Belkin USB Storage Center (where the printer is listed) was being blocked, and would I like to allow access. I selected "Allow Access". Printer has not been connecting all week. No error messages - it tries to connect, and then just stops. Can't find issues with the router or the printer - only with the firewall. Everything looks the way I assume it should - the printer is listed in the Belkin storage center. The Belkin storage center is listed in the firewall. There is no tech support for the firewall. There is no tech support for the printer.
View 4 Replies
View Related
Aug 31, 2011
I am having trouble connecting router to my pc hp pavillion with windows vista using verizon internet.
View 1 Replies
View Related
Sep 2, 2011
Where do I find View Available Wireless Networks in Windows 7?In XP there is a network icon in system tray to right click but what about Windows 7?
View 2 Replies
View Related
May 13, 2012
I would rather have wireless to wireless . Like I said I have a new EA4500 trying to extended my wireless connection to my back yard still having the same trouble of small to no signal, I have a Belkin N+ Ver.2 that I had been using with the same trouble. I would like to connect the belkin N+ to the EA4500 to extend my wi-fi to my back yard and back half of my house.
View 7 Replies
View Related
Dec 12, 2011
I just want to open up a few ports for Age of Empires 3 but no matter what I do the ports still stay closed.I have a Belkin F6D4630-4 v2 modem/router (firmware updated to 2.00.25) and I use https:[url].... to check my ports.
I've forwarded the ports 2300-2310 in my router (both TCP and UDP) using the 'virtual servers' thing.
I've disabled windows firewall.
I've disabled my AVG antivirus.
I've disabled and enabled this thing to see if it would make a difference:
"UPNP Enabling:
Allows you to turn the UPNP feature of the Router on or off. If you use applications that support UPnP, enabling UPnP will allow these applications to automatically configure the router." When I probe the ports from 2280 to 2330 using the Gibson research website, the ports I forwarded (2300-2310) say 'closed' and the others say 'stealth'. Why do they say CLOSED and not OPEN? There shouldn't be anything blocking those ports.
When I probe the ports from 2280 to 2330 with windows firewall ON, all of them say 'stealth', even though I've added those ports to the windows firewall exceptions.I just want those ports to say "OPEN" so I can join all games on Age of Empires 3 instead of coming up with the message "Failed to join game".
View 19 Replies
View Related
Jul 28, 2012
My Belkin "ADSL 2+ Model with Wireless G" router suddenly stopped allowing wireless access this afternoon - right in the middle of use - although the wired connections to that router still work fine. No settings seem to have been changed on the router, and I'm the only one with access. Two phones and a laptop that normally work fine just won't get an connection. The laptop - running windows 7 - says the configuration saved did not match what the router was asking for. I tried another computer that doesn't normally connect by wireless and was prompted for a WEP key - which is odd because the router is configured for WPA/WPA2 AES access with a 9 character pre-shared key. After trying a key unsucessfully I haven't been able to get that prompt up again.Meanwhile I've gone into the router settings and it's definitely set to ask for WPA/WPA2. There are some WEP keys specified if I use the drop-down menu to select WEP, but I can't get any device to prompt me to enter one now.
View 5 Replies
View Related
May 1, 2012
I have a CLEAR modem want to know how to setup my Belkin router so I surf the internet for my laptop and tablet pc. The subsection is the router.
View 1 Replies
View Related
Oct 5, 2011
I have recently installed a TWC Ubee modem/router combo and have networking a laptop and another PC (this one). The holds a constant internet connection. The PC using a Belkin Wireless G network adapter card is frequently losing connectivity to the internet.
View 4 Replies
View Related
Feb 1, 2013
i bought my xbox360s 3 days ago, brought it home and set it up, finds my belkin surf modem router f7d2401 v1, i enter the normal passcode i have used for that past 2 years with other items such as laptops and iphones, but it cant connect?
i think it has something to do with the i p address, its showing 0.0.0.0 when set on automatic, i then checked on the belkin setep page, and it showed the dchp was enabled? so i then got the information of the website and entered it manually but it still couldnt connect, i called both xbox and belkin and i know no more than i did before...xbox tried telling me after hours of questions and tests that it was my router, it musnt give out the 2.4gghtz needed, so i then called belkin, they also did tests and asked me questions and then told me that his computer screen is telling him the router can not connect to that xbox.
View 2 Replies
View Related
Sep 10, 2012
I have a Belkin F5D 8633-4 wireless modem/router which also has ports for wired connections. Would like to network the 3 PCs that currently use it for internet to be able to share printers. 2 are XP Home and 1 is XP pro. XP pro is the wireless the other 2 are wired.Tried the Wizard on XP pro but could not get it to work. Ideally I would like all 3 PCs to be able to access either of the 2 printers that I have but if I could do it with 2 of the PCs that would be OK.
View 7 Replies
View Related
Apr 14, 2012
How do I get my verizon usb mobile modem to work with my wireless router? My router is a Belkin N150.
View 1 Replies
View Related
Aug 11, 2011
Two days ago we received our new phone land line from Mediacom. We already had internet service from them so we decided to get a phone line. When they came over two days ago, we received a new modem, RCA DHG535-2. The issue we are experiencing is that the modem is not connecting to our rt n-16 ASUS wireless router. The modem works fine without the router but we need it for school work. The troubleshooter says "DNS is not available".A few things i tried was to unplug everything and reconnect them back from the modem to the computer.It usually works when i had trouble in the past but it seems nothing is working.
View 4 Replies
View Related
Mar 12, 2013
I have a Wimax internet connection via an ethernet cable from a small roof top receiver dish. Inside the house the cable (RJ45) is plugged into the POE slot on one side of a small electrically powered black box, and from the other side, an ethernet cable (RJ45), connects to my PC. I want to share my internet connection with my HTC mobile and would prefer to make use of an existing Belkin 54g ADSL2 modem/wireless router (Belkin F5D7633) if I can. As this router's incoming port is specifically for ADSL my internet RJ45 cable can not plug into it. I have been advised that I can still utilise the router part of the Belkin though, using my PC as an access point, by plugging the ethernet cable from the PC side of the little black box into LAN 1 on the router, then joining the PC to LAN 2 of the router with another ethernet cable.I did not alter the configuration of the Belkin at all (having reset factory defaults beforehand), mainly because although I could access the internet from my PC and my mobile, I could not access the IP address of the router, presumably because the properties of the local area connection on my PC remained unchanged with the IP address (172.168.1.149), Subnet Mask (255.255.255.0), Default Gateway (172.168.1.1) and 3 DNS addresses (172.168.1.1) (10.30.0.1) (8.8.8.8) as they were before hooking up the Belkin. The IP address the mobile received through WIFI on connecting to the Belkin was 172.168.1.148
I was not unduly concerned about not being able to access the configuration of the router as everything was working as I had hoped it would and even when I powered off my PC I still had internet access on my mobile. On rebooting the PC, however, I found that the router changed the DNS addresses on the PC to 2 only, both identical (192.168.2.1) and the IP on the mobile was allocated 192.168.2.2 Although I could still access the internet on my PC, I no longer had access from my mobile although the WIFI connection to the Belkin showed as being 'excellent'. When I did a 'repair' of my internet connection, hoping to revert to a fully operative state, the PC configuration changed again as follows: IP address becomes that of the router (192.168.2.1), Subnet Mask (255.255.255.0), Default Gateway (192.168.2.1), 2 DNS addresses (192.168.2.1) and the IP address allocated to my mobile remains (192.168.2.2) This configuration means I have no internet access from either PC or phone, but CAN access the router configuration. I restored a usable operating state by unplugging the power from the router, transposing the cables in the LAN ports on the router (swapped cable from LAN1 to LAN2 and vice versa), turned off WIFI on mobile and waited a minute or two. When I powered the router back up and switched on mobile WIFI again, everything was restored to the original working state and I have, once again, access to internet on both PC and mobile. It is very frustrating, however, to keep performing this ritual and I wonder if any of you more technically minded, know a way to work around this, perhaps by manually changing the configuration of PC or router?
View 3 Replies
View Related
Aug 26, 2012
I've got a Belkin F5D8236-4 wireless router. I've had no trouble connecting three laptops to it, but I've completely failed with my HTC smartphone and a friend has failed with a iPhone, I've also failed with an iPod. I've just got a Nexus 7, for my birthday, and that won't connect either! All devices find the network, they just don't connect!
View 6 Replies
View Related
Jan 1, 2011
I have a Linksys wireless-G connected to my main computer and modem. We live in an extremely long house and I am attempting to connect a Belkin wireless-G router so that the signal is stronger on the other side of the house.
View 1 Replies
View Related
Jan 1, 2013
I am setting up a home network for transferring files from pc to NAS to popcorn hour.I already own a belkin modem/router which I don't use as I am with sky broadband and use there modem. Can I use my belkin wireless modem/router as a router only?
View 1 Replies
View Related
May 24, 2011
show me how to hook up a Belkin G Router to a symomatic Atlantics modem its already from the wall hooked up to my moms desktop and i want it also on my desktop.
View 1 Replies
View Related
Nov 2, 2011
A couple nights ago, in the middle of my surfing the net, i was cut off and 'checked the modem (working good) and the router, displaying blinking amber lights --modem and internet. I had to restart my router, usually, it would work after that and i could surf again. This time, when it started back up, the router light turned blue and then the modem and internet light started blinking amber. I haven't done anything except chat over the net when it happened. All other lights are blue. I have cycled the modem power, the router power, and restarted the computer and have the same results. I already followed the troubleshooting from Belkin support 192.168... completely restore it to it's factory settings and yet, i still end up not being able to connect in the internet and with that blinking amber lights. I already tried connecting directly from my modem to my win 7 laptop --no problem at all. I could surf and chat. but when i tried connecting it again from modem to router so i can do wireless.
View 4 Replies
View Related
Oct 5, 2011
I bought this ( Belkin N150 Wireless Modem Router with Push Button Security Set Up and Network Status Display (F6D4630uk4A): Amazon.co.uk: Computers & Accessories )I want to use this instead of the modem I have now. Is it possible to make this my modem to connect to from the internet? I have a cheap talktalk modem and I want to get rid of it.
View 2 Replies
View Related
