Setting Up Belkin Router Wireless With Clear Modem?
May 1, 2012I have a CLEAR modem want to know how to setup my Belkin router so I surf the internet for my laptop and tablet pc. The subsection is the router.
View 1 Replies
ADVERTISEMENT
DIink DIR-655 - New Clear Modem With Another Router
Oct 17, 2012I just got ClearWire and frankly it's really good but only when wired directly to the modem. The wireless is a joke, my roommates can't even get a stable connection 20 feet away. So I was trying to hook up my DIink DIR-655 up to the WIXFPR-131 modem and it won't let me.
View 3 Replies View RelatedRouters / Switches :: Unable To Configure Netgear Router With Clear Modem
May 2, 2011i am unable to configure my netgear router with my clear modem
View 1 Replies View RelatedSetting Up A Modem / Router Combo (D-Link DSL2730-B) As A Dedicated Modem?
Feb 28, 2013i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI:
VCI: These 2 already came with presets. Should I just leave them?
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA
Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX
Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
[code]...
Belkin F5D7230-4 How To Clear Dhcp List
Feb 8, 2011Is there any way to clear the archived DHCP list on the Belkin F5D7230-4 wireless router? Over the years there have been a lot of connections, most are no longer around but the Belkin holds on to the list. I can find no way to clear it to get it back to what is currently connected. I have tried a soft reboot, unplugging power etc but it seems like I will have to do a factory reset and apart from not being able to find my ADSL login details, I would have to reset all my settings.
View 2 Replies View RelatedLinksys Wireless Router :: Setting Up EA6500 Without A Modem?
Apr 8, 2013I recently purchased an EA6500 router to replace the crappy Westell 7550 AT&T provided me with. The 7550 was easily hooked up with two cords: the Ethernet cord into the computer and the Internet/data cable hooked into the DSL filter. I thought the EA6500 would have an easy installation, but it has not gone so smoothly. I hypothesize it's one of two problems - either the Internet/data cable is incompatible with the EA6500 (the cable works; I've re-tested it on the 7550), or it is because all instructions mention plugging the Internet/data cable into a modem's port while I do not have a modem. My Internet comes from a DSL filter attached to a telephone jack in the wall.
View 1 Replies View RelatedBelkin N+ Wireless Modem Router Won't Boot?
Sep 8, 2012We have owned a this router for nearly a year now, and recently it has been acting up.Today I added a static connection or something of the like for my Xbox, with the correct ip gateway and subnet mask. Since the restart it has never stopped cycling the boot sequence without end. The download lights cycle and the router light flashes constantly. And I am unable to connect to the router page at 192.168.2.1 So I cannot reset the router, the hardware reset button just momentarily pauses the endless booting process.
View 4 Replies View RelatedDSL Modem And Belkin Wireless Router On Same Network?
Jan 6, 2011I have a DSL model from AT&T that gives me 4 ports and I have a Belkin Wireless router that gives me another 4 ports. BUT, the computers on the AT&T modem cannot see the computers on the Belkin router. Should I set the address in the Belkin router to the one the AT&T modem has?
View 7 Replies View RelatedSudden Wireless Access On Belkin Modem / Router
Jul 28, 2012My Belkin "ADSL 2+ Model with Wireless G" router suddenly stopped allowing wireless access this afternoon - right in the middle of use - although the wired connections to that router still work fine. No settings seem to have been changed on the router, and I'm the only one with access. Two phones and a laptop that normally work fine just won't get an connection. The laptop - running windows 7 - says the configuration saved did not match what the router was asking for. I tried another computer that doesn't normally connect by wireless and was prompted for a WEP key - which is odd because the router is configured for WPA/WPA2 AES access with a 9 character pre-shared key. After trying a key unsucessfully I haven't been able to get that prompt up again.Meanwhile I've gone into the router settings and it's definitely set to ask for WPA/WPA2. There are some WEP keys specified if I use the drop-down menu to select WEP, but I can't get any device to prompt me to enter one now.
View 5 Replies View RelatedNew TWC Ubee Modem / Router Vs Belkin Wireless Adapter?
Oct 5, 2011I have recently installed a TWC Ubee modem/router combo and have networking a laptop and another PC (this one). The holds a constant internet connection. The PC using a Belkin Wireless G network adapter card is frequently losing connectivity to the internet.
View 4 Replies View RelatedBelkin F5D 8633-4 Wireless Router / Modem - How To Set Up Network
Sep 10, 2012I have a Belkin F5D 8633-4 wireless modem/router which also has ports for wired connections. Would like to network the 3 PCs that currently use it for internet to be able to share printers. 2 are XP Home and 1 is XP pro. XP pro is the wireless the other 2 are wired.Tried the Wizard on XP pro but could not get it to work. Ideally I would like all 3 PCs to be able to access either of the 2 printers that I have but if I could do it with 2 of the PCs that would be OK.
View 7 Replies View RelatedLinksys Cable / DSL :: Wag120n Modem Router Wireless Security Setting?
Jan 14, 2012I am using wag120n modem router but is confused abt how to setup it's wireless security.The wireless securit setting recommended in tutorial given here is very different from what is given in my routrs setting up page.
I don't know how to handle the key renewal option.If i leave it as 3600 seconds does that mean i have to enter a new key in my wireless device connected to the router after every 1 hour?
Clear Internet Modem Hook Up To Blu-ray Player?
Jan 28, 2013How do I hookup my blue ray player to my CLEAR internet modem? Themodem is hooked up to my pc. I have an ethernet cable that I can hook upto the blue ray but can,t hook up to the modem as it only has one ethernet
View 2 Replies View RelatedProtocols / Routing :: Belkin Enhanced Wireless Modem Router?
Oct 5, 2011I bought this ( Belkin N150 Wireless Modem Router with Push Button Security Set Up and Network Status Display (F6D4630uk4A): Amazon.co.uk: Computers & Accessories )I want to use this instead of the modem I have now. Is it possible to make this my modem to connect to from the internet? I have a cheap talktalk modem and I want to get rid of it.
View 2 Replies View RelatedCreating One Network With Belkin Modem And Netgear Wireless Router
Oct 3, 2012Basically what is happening is I have a fiber decoder whitch goes into My belkin modem which controls my phone and Internet and with the company I am with we need that modem, I also have a netgear router so I can have wireless through my house but I want to plug LAN into the belkin router and still use the netgear for transmitting wireless.In short I want LAN in belkin but still have the netgear transmitting wireless and everything on the same network,E.g I have a pioneer amp and I use the iPhone app icontrol over my wireless but I can't because the amp is plugged into the belkin and the app is using netgear.
View 1 Replies View RelatedBelkin Surf Wireless Modem / Router Crashing Windows 7?
Mar 13, 2011I am using a Belkin Surf wireless modem/router with this computer (Vista) no problems at all.When I boot up my HTPC (Windows 7) all is fine until it tries to connect with the Belkin Surf. Then its Blue Screen of Death and no joy. If I turn off the modem, the HTPC boots up perfectly normally. Turn the modem on and as soon as I try to recognise the home network, it crashes again.
View 2 Replies View RelatedBelkin N600 DB Wireless Router Is Getting No Internet Connection From Modem?
Jan 18, 2012Just purchased a Belkin N600 DB N+ Wireless Router because the wireless on my Actiontec PK5000 really isn't so great. When I hook up the router to my modem and after running the install CD I couldn't get connected to the internet. So I looked at my modem and noticed the light where I had plugged in my router VIA ethernet wasn't lit up like the rest of my ethernet ports even after switching them around.
View 6 Replies View RelatedTP-Link ADSL2+ Wireless :: Lan Setting In ADSL Modem Router TD-W8968 Failed
Jan 2, 2013Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP : Streamyx
In the process of Lan setting my new wireless adsl modem router TD-W8968, an error message shown when I press save. Error Code: 1, Internal error.
Belkin Routers :: N150 Wireless Modem Router ADSL Slot?
Dec 17, 2012I bought "Belkin N150 Wireless Modem Router" and while installing noticed that the ADSL slot is too short that does not fit the LAN chord, instead fits the telephone chord. How do I fit the LAN chord fit in the ADSL slot? Any alternatives? My ISP comes with a LAN chord and is connected directly to my PC.
View 3 Replies View RelatedSetting Up A Password For Belkin Router?
Mar 4, 2012I bought a N150 belkin router from a friend without the quick installation guide that was supposed to be incuded. I tried to set it up myself using the CD-Rom but wasn't able to so my roomate did it with the CD-rom she had. She didn't know how to put in a password so I was able to connect my laptop by pressing the WPS button on the router. Now I want to connect another laptop but I need the security key. How do I set one up?
View 2 Replies View RelatedF5D7632-4 - Set Up Ethernet Port For DHCP With Belkin ADSl Modem With Wireless G Router?
Mar 14, 2011how do you set up an ethernet port for DHCP with a Belkin ADSl modem with wireless G router, model number F5D7632-4?
View 1 Replies View RelatedRouters / Switches :: Setting Belkin Router To Xbox 360?
Jan 22, 2011I am trying to connect my xbox360 to my belkin surf n300 router via ethernet cable and my xbox360 cant recognize or get onto my network. i have manually entered the ip address the submask and gateway numbers, idk if they are 100% correct
View 1 Replies View RelatedF5D7231-4 - Setting Up A Belkin Router As An Access Point
Aug 3, 2011I have a Belkin High-Speed Mode Wireless G Router F5D7231-4 and I wish to use it as an access point for my main desktop for my wireless network.
I have followed methods supplied by both Belkin and users and have had no success.
Instructions followed:
- Connect a computer to Belkin router using an ethernet cable.
- Reset the router to factory defaults. The reset button can be found at the botton of it. The reset procedure is given below
- Make sure the router is switched ON.
- Locate the reset button(inside a hole) at the back of the router.
- Use a paper clip, push the reset button and hold it for 30 seconds then release the reset button.
- Unplug the Power cable from back of the router and plug it back again and wait for another 30 seconds.
- Log on to router setup page by typing 192.168.2.1 in the address bar of the browser.
- On the left under wireless click on the option Use as Access Point.
- Select Enable and specify the IP address as 192.168.2.254 and subnet mask as 255.255.255.0 and click on apply changes.
Every time the system crashes whilst applying the changes.
Setting Up Router In Dorm - No Modem
Jan 24, 2011I am trying to setup a wireless router in my dorm but I cant seem to find any solid guide on how to do it. Simply plugging it in to the ethernet port provided in my room doesnt do it. It seems I have to configure it, but I dont know where to begin.
View 6 Replies View RelatedLinksys - Setting Up Router With DSL Modem
Jan 15, 2013Setting up a linksys router with dsl Modem.laptop direct to modem works router connected dhcp to laptop Eth. port 1 OK router to modem dhcp does not generate DNS but appears to give IP address. Result: can't connect to internet / diagnosis says cannot resolve ( google.com or yahoo.com etc.)
View 2 Replies View RelatedBelkin G F5D7634-4 - Setting Up Wireless Network?
Jun 22, 2011I'm trying to connect a wireless router modem (Belkin G F5D7634-4) to an already exisiting wired network in our home (Wired modem is a Scientific Atlanta EPC2100 series). The wired modem is connected to our home computer, and i want to connect the wireless modem so that i can pick it up on my xbox etc. Yet the home computer dosen't have wireless capabilities, so still requires the wired modem. I've tried, unsuccesfully to set this up, i've connected the 2 and the home computer so that the internet still works through the wired modem, an wireless signal is being put out (without internet and i'm unable to access the router's settings page) Is there any way for this to work? And if so, how would i do it. If not, what are the alternatives?
View 3 Replies View RelatedSetting Vlan Password For Modem / Router?
Apr 26, 2011I have a siemens gigaset567 unit.I suspect others are accessing via vlan.
View 1 Replies View RelatedSet Up A New Belkin Modem / Router - No LAN
Jun 1, 2012I am trying to set up a new Belkin modem/router.I have Internet on all three computers over both ethernet and wireless, but no local network. I think the problem may be IP addresses, but I cannot solve it.The LAN settings in the router now are:
DHCP (.) On
IP Pooling Start 192.168.2.2
IP Pooling End 192.168.2.100
Lease time: forever
LAN/DHCP Client List is empty.With the previous modem the IP addresses of the machines were from 192.168.1.2 upwards, but the new modem considers this range invalid.(This isn't specifically an XP problem as one of the machines is Window-7).
D-Link WBR 1310 - Setting Up Router / No Access To Modem
Dec 12, 2012The wireless is just beyond my computer's ability to detect. I have a D-Link WBR 1310 Router hooked up to a high gain wireless antenna-yes, clear line of sight. I have no direct access to our community modem or ISP.
View 10 Replies View RelatedBelkin Router Not Recognizing The Ericsson Modem?
Oct 11, 2012My main networking device is the Ericsson T073G HGU ONT, and when I am connecting to the network through the Ethernet there are no problems. However when I connect my Belkin F6D4230-4 router to it (through cable) my router cannot recognize the modem.
View 18 Replies View RelatedBelkin Router Will Not Connect To Cable Modem?
Aug 6, 2012Last week, a big storm rolled through my town while I was out of the area on business. I had a working LAN/WLAN for my home & home office, and the modem I was using got fried by the storm. Strangely enough nothing else was affected..Anyway, I went out and bought an identical modem, and had it set up with Comcast. If I connect directly to the modem, everything works perfectly. But when I try to attach my router to the new modem, I have no connectivity over wifi OR hardwired to the router. According to the status light on the router, it can't find a connected modem.I reset the router back to factory settings, installed the newest firmware, and moved my DHCP pool out of the default range. I then power cycled the whole setup - twice - with no success.
View 5 Replies View RelatedBelkin N600 Router To Modem With Only One Port?
Nov 27, 2012My roommate and I have High speed cable internet and the modem is set up in his room. I bought a n600 belkin router and a usb wireless adapter so my computer in my room will get internet. Only problem is there is only one ethernet port on the modem that the internet provider gave us and of course that is taken up by his computer. How do I hook up the router to the modem and get all this to work so I can get on the internet as soon as possible?
View 1 Replies View RelatedSetting Up The Wireless Modem At Home
Mar 29, 2011I can't get traditional broadband services, so I've been making due with Verizon's Mobile Broadband service. Problem is, it's expensive and has a 5GB cap per month. I read about powerline networking and thought it sounded good, so I bought all the adapters and a router. Problem is, I didn't have the prior knowledge to realize I also needed a modem as well. How or if I'd be able to set up any sort of modem in my home, considering services like Verizon can't reach me?
View 3 Replies View Related