I have recently installed a TWC Ubee modem/router combo and have networking a laptop and another PC (this one). The holds a constant internet connection. The PC using a Belkin Wireless G network adapter card is frequently losing connectivity to the internet.
View 4 Replieshow to i connect mu linksys router to my ubee cable modem
View 2 Replies View RelatedI have Charter Communications Internet Service the 18MB Service. All Day today the Modem kept Resetting itself as if I had the modem plugged into a lightswitch, Called Charter and they gave me the run around. Im leasing this Cable Modem / Router all in one from them, its a Ubee DDW3611 Docsis 3. Here are the Event Logs as well as my Signals Right here,
[code]....
I just got set up with time warner, and the modem they gave me (Ubee DDW3611) also has a built in router. I already have an Asus RT-N15 running DD-WRT, and this is what I want to use as my router.
If I connect the Asus router to the Ubee router, is my Asus router going to take control? It appears as though it's handeling DCHP, but what about things like port forwarding? Am I going to run into trouble by having both routers? Is there any settings I should make in the Ubee router, or just leave it be?
Can I use wireless USB g netgear adapter with wireless n belkin router
View 1 Replies View RelatedI am trying to sync the vizio wireless tv to the router. I need the security code for the ubee router?
View 1 Replies View Relatedmy netgear wireless router cannot see my n300 usb adapter. it shows as working in my device manager, but the netgear router says wireless not connected. when installing the adapter it said that windows has an icon to the left of the taskbar that i can click on and ask to join a network, which it didnt. it just showed network and an option to open network and sharing center, which i did. there were no wireless networks that showed available for me to log into with the adapter
View 4 Replies View RelatedWe have owned a this router for nearly a year now, and recently it has been acting up.Today I added a static connection or something of the like for my Xbox, with the correct ip gateway and subnet mask. Since the restart it has never stopped cycling the boot sequence without end. The download lights cycle and the router light flashes constantly. And I am unable to connect to the router page at 192.168.2.1 So I cannot reset the router, the hardware reset button just momentarily pauses the endless booting process.
View 4 Replies View RelatedI have a DSL model from AT&T that gives me 4 ports and I have a Belkin Wireless router that gives me another 4 ports. BUT, the computers on the AT&T modem cannot see the computers on the Belkin router. Should I set the address in the Belkin router to the one the AT&T modem has?
View 7 Replies View RelatedMy Belkin "ADSL 2+ Model with Wireless G" router suddenly stopped allowing wireless access this afternoon - right in the middle of use - although the wired connections to that router still work fine. No settings seem to have been changed on the router, and I'm the only one with access. Two phones and a laptop that normally work fine just won't get an connection. The laptop - running windows 7 - says the configuration saved did not match what the router was asking for. I tried another computer that doesn't normally connect by wireless and was prompted for a WEP key - which is odd because the router is configured for WPA/WPA2 AES access with a 9 character pre-shared key. After trying a key unsucessfully I haven't been able to get that prompt up again.Meanwhile I've gone into the router settings and it's definitely set to ask for WPA/WPA2. There are some WEP keys specified if I use the drop-down menu to select WEP, but I can't get any device to prompt me to enter one now.
View 5 Replies View RelatedI have a CLEAR modem want to know how to setup my Belkin router so I surf the internet for my laptop and tablet pc. The subsection is the router.
View 1 Replies View RelatedI have a Belkin F5D 8633-4 wireless modem/router which also has ports for wired connections. Would like to network the 3 PCs that currently use it for internet to be able to share printers. 2 are XP Home and 1 is XP pro. XP pro is the wireless the other 2 are wired.Tried the Wizard on XP pro but could not get it to work. Ideally I would like all 3 PCs to be able to access either of the 2 printers that I have but if I could do it with 2 of the PCs that would be OK.
View 7 Replies View RelatedI bought this ( Belkin N150 Wireless Modem Router with Push Button Security Set Up and Network Status Display (F6D4630uk4A): Amazon.co.uk: Computers & Accessories )I want to use this instead of the modem I have now. Is it possible to make this my modem to connect to from the internet? I have a cheap talktalk modem and I want to get rid of it.
View 2 Replies View RelatedBasically what is happening is I have a fiber decoder whitch goes into My belkin modem which controls my phone and Internet and with the company I am with we need that modem, I also have a netgear router so I can have wireless through my house but I want to plug LAN into the belkin router and still use the netgear for transmitting wireless.In short I want LAN in belkin but still have the netgear transmitting wireless and everything on the same network,E.g I have a pioneer amp and I use the iPhone app icontrol over my wireless but I can't because the amp is plugged into the belkin and the app is using netgear.
View 1 Replies View RelatedI am using a Belkin Surf wireless modem/router with this computer (Vista) no problems at all.When I boot up my HTPC (Windows 7) all is fine until it tries to connect with the Belkin Surf. Then its Blue Screen of Death and no joy. If I turn off the modem, the HTPC boots up perfectly normally. Turn the modem on and as soon as I try to recognise the home network, it crashes again.
View 2 Replies View RelatedJust purchased a Belkin N600 DB N+ Wireless Router because the wireless on my Actiontec PK5000 really isn't so great. When I hook up the router to my modem and after running the install CD I couldn't get connected to the internet. So I looked at my modem and noticed the light where I had plugged in my router VIA ethernet wasn't lit up like the rest of my ethernet ports even after switching them around.
View 6 Replies View RelatedI bought "Belkin N150 Wireless Modem Router" and while installing noticed that the ADSL slot is too short that does not fit the LAN chord, instead fits the telephone chord. How do I fit the LAN chord fit in the ADSL slot? Any alternatives? My ISP comes with a LAN chord and is connected directly to my PC.
View 3 Replies View Relatedhow do you set up an ethernet port for DHCP with a Belkin ADSl modem with wireless G router, model number F5D7632-4?
View 1 Replies View Relatedhave received an Cisco Model DPC3925 modem/router from UPC (provider in the Netherlands) and they allow me to have 120Mbit connection, but with my own WIFI Adapter I only received between the 40Mbit/60Mbit speed. My question is the following; Wich WIFI adapter is the best adapter for my Cisco Model DPC3925 modem/router?The distance between the modem/router and my pc is not that much. And when I use an cable the connection is between the 90Mbit/110Mbit. The WIFI adapter that I now use is the: TP-Link TL-WN881ND. I was thinking to buy a Linksys AE1200, but I dont know if that adapter is much better then I already have.
View 6 Replies View RelatedI just switched ISP's and they provided me with a Ubee router. The computer plugged directly into works fine, great speed, no drops. A laptop connected via Wifi is the same, great speed, no drops.My Router is not simply 'dropping' connection, but instead, 'disabling' the internet to the devices and forcing me to reconnect in order to get approx. a few minutes of it again.I have a Desktop computer with a WGA600N Gaming adapter hooked up to it, and an iPod touch.Both worked perfectly with the old router, so I know it's the router for sure. The thing is, it's not just dropping and reconnecting..
It's connecting for a few minutes, and disconnecting permanently until I reconnect to the connection..For my iPod, it doesn't actually disconnect me, I just lose internet. It says I still have 3 bars of signal strength on my iPod, but I don't have internet. I must hit 'Forget this Network' and retype the password in order to get another 2-3 minutes out of the signal.As for my Desktop hooked up with the gaming adapter, when the internet 'runs out', I simply unplug it and plug it back in to 'renew' the internet.
I am trying to set up a new Belkin modem/router.I have Internet on all three computers over both ethernet and wireless, but no local network. I think the problem may be IP addresses, but I cannot solve it.The LAN settings in the router now are:
DHCP (.) On
IP Pooling Start 192.168.2.2
IP Pooling End 192.168.2.100
Lease time: forever
LAN/DHCP Client List is empty.With the previous modem the IP addresses of the machines were from 192.168.1.2 upwards, but the new modem considers this range invalid.(This isn't specifically an XP problem as one of the machines is Window-7).
I just bought a new Belkin N750 USB wireless adapter today to replace my old cisco USB adapter well I install the drivers and software that came with it and everything loaded correctly and showed that there was connections available.Where I live we don't have access to the routers as the are controlled by the rental agency and I can't get access to them. But anyways I can connect to the networks with my old usb adapter but not with the new one. My computer is Windows 7 64 bit.
View 5 Replies View Relatedmy belkin n wireless usb adapter is not coming on when i put it in my laptop i see nothing
View 3 Replies View RelatedMy sister had Time Warner road runner cable hooked up today. They gave her a Ubee combo modem and router in one box. When she tries to connect, it does not show up on the list of wlan connections in taskbar. I went thru network settings to try and set up the Ubee and it pops up in a few seconds, then tells you to hit next button and then ask for a 4 to 8 digit pin number which it says is on the modem.
View 1 Replies View RelatedI have a question about my Desktop and the Belkin Wireless adapter that I am using for it. There seems to be a problem with my internet connection and I can't figure it out! I'm suppose to have speeds up to 18mbps and I'm only getting up to 5mbps on my Desktop. Now, here's the weird part...when I connect to my wifi on my laptop and cell phone it gets 16mbps. Why this is only happening to my Desktop??? I have the latest wireless adapter driver installed and everything. Is it the adapter or my system??
Wireless Adapter: Belkin F5D8053 N
Windows 7 Home Premium
Upstairs I have a Century Link modem/wireless router. My wife and I use our laptops, smart phones, and XBox 360 on the wireless network. Downstairs I have an older Dell PC that I use for my business. I have an Ethernet run from upstairs to downstairs. The Ethernet jack upstairs is near a cable outlet because we used to have cable internet. Now we have DSL and the phone jack is on the other side of the room. Here's my question... I have a Belkin N600 wireless router, is there any way I can plug it into the Ethernet port on the other side of the room, and use it like a wireless adapter? I have tried a few time to set it up as an "access point" but it doesn't seem to work. As soon as I do, I can no longer access the Belkin router to make any changes and I need to do a manual reset. can I plug my downstairs PC into the Belkin N600, and have wi-fi internet access from the wireless modem/router upstairs?
View 2 Replies View RelatedMy main networking device is the Ericsson T073G HGU ONT, and when I am connecting to the network through the Ethernet there are no problems. However when I connect my Belkin F6D4230-4 router to it (through cable) my router cannot recognize the modem.
View 18 Replies View RelatedLast week, a big storm rolled through my town while I was out of the area on business. I had a working LAN/WLAN for my home & home office, and the modem I was using got fried by the storm. Strangely enough nothing else was affected..Anyway, I went out and bought an identical modem, and had it set up with Comcast. If I connect directly to the modem, everything works perfectly. But when I try to attach my router to the new modem, I have no connectivity over wifi OR hardwired to the router. According to the status light on the router, it can't find a connected modem.I reset the router back to factory settings, installed the newest firmware, and moved my DHCP pool out of the default range. I then power cycled the whole setup - twice - with no success.
View 5 Replies View RelatedMy roommate and I have High speed cable internet and the modem is set up in his room. I bought a n600 belkin router and a usb wireless adapter so my computer in my room will get internet. Only problem is there is only one ethernet port on the modem that the internet provider gave us and of course that is taken up by his computer. How do I hook up the router to the modem and get all this to work so I can get on the internet as soon as possible?
View 1 Replies View Relatedwhile my younger brother borrowed my USB adapter to fix somerhing on his computer (he normally doesn't have net), I was using a flash drive. I had left the drive in, and my (very heavy) DVD drive was dropped on it, breaking both the front USB 2.0 ports and the flash drive. So I had to put the adapter in the back ports. The first few hours were fine, then net cut out. I repaired the connection, only to have to keep repairing every 30 seconds to 10 minutes. Then it stopped working altogether. I've attempted re-installing drivers, but when I do, my computer tells me that the driver I'm installing from my hard drive "Has no information on my hardware", but it's the correct driver and version for my hardware.
View 1 Replies View RelatedI am attempting to set up a wireless connection on an HP desktop that runs Vista. I recently purchased a Belkin N150 Wireless USB Adapter (Version F9L1001). My computer, first, will not run the software CD automatically; I have to find it and double-click on it. Then, after the drivers are supposedly installed and I restart according to the instructions, my computer is unable to find them when I plug in the adapter. Additionally, when I try to start the driver program myself, it refuses to go. I have uninstalled and reinstalled the driver software four times and I have gotten the following same results every time. Also, I do not have a router installed yet, as we were told initially that all we would need to use to connect the desktop to our wireless Internet was the adapter
View 4 Replies View RelatedI cannot find any drivers for Belkin wireless adapter F7D1101 v1 for Windows 7
View 1 Replies View RelatedI just want to open up a few ports for Age of Empires 3 but no matter what I do the ports still stay closed.I have a Belkin F6D4630-4 v2 modem/router (firmware updated to 2.00.25) and I use https:[url].... to check my ports.
I've forwarded the ports 2300-2310 in my router (both TCP and UDP) using the 'virtual servers' thing.
I've disabled windows firewall.
I've disabled my AVG antivirus.
I've disabled and enabled this thing to see if it would make a difference:
"UPNP Enabling:
Allows you to turn the UPNP feature of the Router on or off. If you use applications that support UPnP, enabling UPnP will allow these applications to automatically configure the router." When I probe the ports from 2280 to 2330 using the Gibson research website, the ports I forwarded (2300-2310) say 'closed' and the others say 'stealth'. Why do they say CLOSED and not OPEN? There shouldn't be anything blocking those ports.
When I probe the ports from 2280 to 2330 with windows firewall ON, all of them say 'stealth', even though I've added those ports to the windows firewall exceptions.I just want those ports to say "OPEN" so I can join all games on Age of Empires 3 instead of coming up with the message "Failed to join game".