Belkin N600 DB Wireless Router Is Getting No Internet Connection From Modem?
Jan 18, 2012
Just purchased a Belkin N600 DB N+ Wireless Router because the wireless on my Actiontec PK5000 really isn't so great. When I hook up the router to my modem and after running the install CD I couldn't get connected to the internet. So I looked at my modem and noticed the light where I had plugged in my router VIA ethernet wasn't lit up like the rest of my ethernet ports even after switching them around.
View 6 Replies
ADVERTISEMENT
Feb 6, 2012
I'm trying to install a new modem/router (the above) and am having a few problems. The install seems to have gone fine and the firmware has been updated to the latest version. PCs/laptops/PS3s/phones can all connect to the router both wired and wireless. But the modem seems to be dropping its connection to the internet at regular intervals - sometimes every 15mins, other times less. The security log mentions "PPPoE disconnected" after which it reconnects.Has anyone got an idiot proof list of what I should be checking? My old Net gear DG834PN does not have this problem at all so it really has to be the router rather than the line - at least that is my guess.
View 2 Replies
View Related
Nov 27, 2012
My roommate and I have High speed cable internet and the modem is set up in his room. I bought a n600 belkin router and a usb wireless adapter so my computer in my room will get internet. Only problem is there is only one ethernet port on the modem that the internet provider gave us and of course that is taken up by his computer. How do I hook up the router to the modem and get all this to work so I can get on the internet as soon as possible?
View 1 Replies
View Related
Feb 13, 2013
Having an issue with my Belkin N600 router - when initially installed it was working fine but in the past week it has gtten slower - if I connect directly to my DSL modem my speed is 1.5 MBS when I use the router connection my speed drops to .1 MBS - tried resetting to factory defaults & that did not work also tried resetting my modem *& router still having the same issue.
View 9 Replies
View Related
Apr 21, 2011
I'm trying to network a small office and have the following devices:
SMCD3G Cable Modem
Belkin Play N600 Router
Digi Mil-H1130 8 Port Ethernet SOHO Hub
Hubbel Cat5 Patch Panel (goes up to 12)
We're replacing our DSL line with a Cable line. Our DSL was a one piece wireless router/modem. When it was installed, it was inside our office, next to the server, and plugged into Wall Jack 1 for all the other computers to connect to. Our server plugged into this modem/router. We didn't have the Belkin Router at the time. The Patch Panel wires went into the Hub behind our office and everything was fine.
The cable modem is now next to the Hub and Patch Panel. I bought the router since we didn't have the wireless feature that the DSL had and everyone I spoke to said I need a router to set up the office. I ran one of the LAN lines from the modem into the Router where it says Modem (WAN). From the Router, I ran the line 1 (LAN) into the Hub. (Does the number matter if nothing is plugged into it in our office?) No computer is able to connect to the internet except my laptop which connects wireless. It works fine.
Another problem. We have a server computer that's Unix based. In order for anyone to connect to the server to access the office software used, the IP address of the router must be 192.9.2.1 or the computer your using won't connect via Multiview 2000 Terminal Emulator. I can't connect to the server because the IP address of the router is still 192.168.2.1. I don't know where I have to go in the router settings to change it. I've tried a few spots and it tells me the IP address is invalid. The settings I had with the DSL modem/router were:
Modem IP address - 192.9.2.1
Subnet Mask - 255.255.255.0
DHCP Start Address - 192.9.2.100
DHCP End Address - 192.9.2.150
It's not like I need to run wires. Everything is set. If something is plugged into a wrong spot, I can switch it.
Additional info:
There are 4 computers in the office and 8 numbered wall jacks.
Server computer - Wall jack 8 (IP address of this machine - 192.9.2.25)
XP Machine 1 - Wall jack 4 (can't connect to server! No internet.)
XP Machine 2 - Wall jack 1 (Is able to connect to the server! No internet.)
Win CE Machine - Wall jack 9 -
I assume. I have a wire that goes through the wall on this machine and it isn't marked. (Rarely used so not sure about server connection)
Wireless Windows7 laptop - connects to the internet fine since it bypasses all these wires. Can't connect to server.
Under the DHCP client list, only 2 computers are listed. The one that has internet is my computer. The other computer listed is wall jack 4 and that has internet now.
my computer - 192.9.2.2
wall jack 4 - 192.9.2.3
The router IP is 192.168.2.1 and the Cable Modem is 10.1.10.11. If I type either number into my web browser it will take me to the router setup page. I don't know where/how to check if it's only one device acting as DHCP. What I want to do is be able to get online with all the computers as well as have access to the software on the server through the office wall jacks. In order to do that I need the router IP address to be 192.9.2.1 and then I'd be able to connect to it.
Right now, one computer is able to connect to the server via hard wire but can't connect to the internet.Another computer is able to connect to the internet via hard wire but can't connect to the server.My laptop can connect wireless to the internet but not the server. In a perferct world, all the computers should be able to connect to both the internet and the server. Right now, it's one or the other with both hard wired machines and I don't know why. Is there a wire not in the hub right? Is a patch panel wire plugged into the wrong port of the hub? I don't know what's supposed to go where. tell me "wire X from the modem goes to Port Z of the router, and Wire Y from the the router goes to number V on the Hub, and that wire goes to number T on the patch panel for the Port number R in the office to work..." I'll try it.
Then I think all I need to do is change the router's IP address to 192.9.2.1 and everyone should be able to connect to the server through the Multiview 2000 Terminal Emulator.When I tried to change the IP address on the router it's telling me it's not valid. Under LAN settings it says 192.168.2.1 - when I try to change it to 192.9.2.1 it tells me LAN IP address is invalid. I clicked on More Info below that in the router page and a pop up gives me info. It says:
The "IP address" is the Internal IP address of the Router. To access the advanced setupinterface, type this IP address into the address bar of your browser. This address can be changed if needed. To Change the IP address, type in the new IP address and click "ApplyChanges". The IP address you choose should be a non-routable IP. Examples of a non-routable IP are:
192.168.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)
10.y.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)
172.z.y.x (where z is anything from 16 to 31, and y is anything between 0 and 255, and x is anything between 1 and 254.)
View 4 Replies
View Related
Oct 15, 2012
I have a Compaq with XP wired on a Network with a Belkin N600 Router.There are 5 computers on the Network, (4 wired, one wireless) and this is the only computer that I have problems with connectivity. It connects to the Belkin through 2 switches.Typically when I turn the system on it connects, downloads mail, etc. After a short period of time there is no connectivity to the network for printing nor the internet.I may get connectivity randomly again after a while, but you never know if or when you will get connectivity again for sure. I am using Explorer.I had loaded some Belkin software with no luck so I uninstalled it. The other computers have no special software for the router.
View 1 Replies
View Related
Nov 9, 2012
I am wanting to force the n600 to g.dmt for a more stable connection. cannot work out how to do it. am force into using old modem as far from the dslam and forcing adsl 1 improves performance.
View 4 Replies
View Related
Nov 13, 2012
F9L1101 N600 DB Wireless Dual-Band USB Adapter : recognizing and connecting to wireless network but unable to use internet. Changed static IP adress, etc but no luck. Followed instructions on support email response:
Windows XP:
Start->Control Panel->Network Connections(classic view)->Right click on Local Area connection(wired)/Wireless network connection(wireless)->Properties->Select Internet Protocol(TCP/IP)->Properties->Under General tab, choose "Use the following IP address" and type the IP address, Subnet mask and Default Gateway, DNS and press OK.
Type in the ip address 192.168.2.20
Enter the subnet mask as 255.255.255.0
Enter the default gate way as 192.168.2.1
Type in the primary DNS as 4.2.2.2
Type the alternate DNS as 8.8.8.8
Am currently unstalling and reinstalling. The network is WEP with a long alpha numeric key, which was accepted and network detected and connected. No internet. No internet. No internet.
View 3 Replies
View Related
Dec 28, 2012
I have a Belkin N600 model # F9K1102v1 i am loosing connection on all of the components connected to it wired or wireless. They all loose connection at the same time. I also noticed the clock in the router does not set to the correct time it is reading 1970 for the year and never changes.
View 1 Replies
View Related
Mar 12, 2013
I am running winsxp prodessional.I have a belkin N600 DB Wireless N+ Router and it is hooked up to a vmax 480 security syestem . this system allows me to see the cameras remotely on my ipad, i iphone amd laptop .
my problem is this the router shuts down and restarts( it must be programmed to do this ) and i lose the remote connection to the cameras. if i am home i can unplug the vmax and it will restart and find the router etc however when i am traveling i can not do this.
View 1 Replies
View Related
Dec 25, 2011
I'm trying to set up a wireless network for my parents. I have a Belkin Play N600 router (model F7D8302) that I'm trying to hook up to an Acer desktop running Vista. The modem is a Siemens Speed stream 4100. I have a cable going from the ethernet port of the modem to the modem port on the router. The pc is connected to one of the other four ports in the router. The wireless works fine, but I can't get the wired connection on the desktop working. The Internet light on the modem is not on, but the modem works fine when connected directly to the pc. I've tried power cycling and resetting everything, but it's still not working.
View 9 Replies
View Related
Feb 2, 2012
I just installed a band new copy of xp on my system and I cannot connect to the internet! I'm connected via Ethernet to my Belkin n600 HD and whenever I go try to follow the steps via Microsoft [Go into Network Connections > Create a New Connection > Connect to the Internet > Set up my connection manually > Connect using a broadband connection that requires a user name and password] It just brings up the old school dial up vpn style thing and never connects to the net. Secondly I tried to install the Belkin software but it just has errors trying to establish a connection with it. The Internet is working fine, I have 5 laptops connected to it.
View 3 Replies
View Related
Sep 1, 2011
I have a Belkin N600 HD.I'm on an Off-net ADSL2 Connection with TPG.It took 2 weeks to connect.I've connected and I'm still downloading at 1.5Mbps (150kb/s)I bought new Lie filters/splitter in case the same ones I have were faulty (C1024M) and connected them correct to both my home phone and my Modem.So I've connected to my net, I can download and do whatever but I'm going at my ADSL1 Speeds. My friend is on the same connection, same modem (he bought it cause of me) and he's hitting higher then me (500kb/s, 600kb/s) Although he's on a separate line so no filters required (I think).He lives about 5minutes away from me (car) and is about the same distance from the exchange as I am (2.5km give or take) [code]
View 1 Replies
View Related
Dec 29, 2012
I have a N600 router. Yesterday, for the first time, I was unable to connect to the internet from my TV. It keeps saying network connection failed. I have unplugged the router and modem several times and that does not work. When I check the various wireless systems available (on the TV screen) I see mine there but it will not connect. At one point I did see something that said ethernet cable disconnected, but I checked and the cable is connected.
View 4 Replies
View Related
Dec 21, 2012
Just installed N600 router. Works for my Windows 7 PC and my Android phone. Does not work with my Windows VISTA PC. It connects to the Router ok, but does not connect with the Internet. Also says UNIDENTIFIED NETWORK. What am I missing?
View 1 Replies
View Related
Dec 31, 2012
Is there a way to Bridge N600 DB Wireless Dual-Band N+ Router F9K1102?
View 1 Replies
View Related
Apr 14, 2013
Installed new N600 router and every box in the house can access the internet - except for my Vista powered laptop. My network shows up as Unidentified network with 'locla only' access. Ben scouring message boards all day. Can't find a solution at Microsoft.
View 3 Replies
View Related
May 1, 2012
I have a PC modem and recently purchase a netgear N600 wireless router. Do they make a splitter of some sort. So I can use both the PC and IPad? If they make a splitter?
View 5 Replies
View Related
Nov 5, 2012
I just updated my router to a Belkin n600 hd dual band n router. anyway i set it up one band for the "family" on 2.4 gig and my gamer on 5 gig. But the problem is none of my desktops and my latptop doesn't see the 5gig at all the only thing that picks it up is my ipad.
View 5 Replies
View Related
Apr 20, 2013
I have a wi fi capable blu ray player which works on wireless g connections, and I also have 2 computers. I have the N600 Dual Band router, and want to know if it is possible to transmit on both frequencies? I am only seeing the 2.4ghz show up for a connection.
View 1 Replies
View Related
Nov 2, 2011
A couple nights ago, in the middle of my surfing the net, i was cut off and 'checked the modem (working good) and the router, displaying blinking amber lights --modem and internet. I had to restart my router, usually, it would work after that and i could surf again. This time, when it started back up, the router light turned blue and then the modem and internet light started blinking amber. I haven't done anything except chat over the net when it happened. All other lights are blue. I have cycled the modem power, the router power, and restarted the computer and have the same results. I already followed the troubleshooting from Belkin support 192.168... completely restore it to it's factory settings and yet, i still end up not being able to connect in the internet and with that blinking amber lights. I already tried connecting directly from my modem to my win 7 laptop --no problem at all. I could surf and chat. but when i tried connecting it again from modem to router so i can do wireless.
View 4 Replies
View Related
Nov 27, 2011
My neighbor is using my Belkin Router the basic one and has comcast. We both use his internet and have had no problems until the past 3 days. He just got the home phone service from comcast and the phone line is setup through the modem. Ever since comcast came to his apartment and set this up the home phone service to his modem the router is connected but there is no internet access. What is going on and how can I fix this. He has an HP with windows Vista and I have a Toshiba Satellite L675 that has Windows 7 Home premium edition on it.
View 1 Replies
View Related
May 20, 2011
I have a belkin N600 I believe and I ran the ipconfig/all and got this
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersMichael>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Nero
Primary Dns Suffix . . . . . . . :
[code]....
also every other device I have can connect except one laptop, ipod, printer, xbox360 all connect just fine. and I have tried iprelease and renew.
View 5 Replies
View Related
Jun 7, 2013
Upstairs I have a Century Link modem/wireless router. My wife and I use our laptops, smart phones, and XBox 360 on the wireless network. Downstairs I have an older Dell PC that I use for my business. I have an Ethernet run from upstairs to downstairs. The Ethernet jack upstairs is near a cable outlet because we used to have cable internet. Now we have DSL and the phone jack is on the other side of the room. Here's my question... I have a Belkin N600 wireless router, is there any way I can plug it into the Ethernet port on the other side of the room, and use it like a wireless adapter? I have tried a few time to set it up as an "access point" but it doesn't seem to work. As soon as I do, I can no longer access the Belkin router to make any changes and I need to do a manual reset. can I plug my downstairs PC into the Belkin N600, and have wi-fi internet access from the wireless modem/router upstairs?
View 2 Replies
View Related
Aug 30, 2012
I recently purchased the Belkin PLAY N600 router to create a private network for my home theatre setup.I have a primary home network 192.168.0.x (NetGear) which I use for all my computing needs. I extended a network cable to my Home theatre area and plugged in the N600 router. After this, I attached a USB external hard drive to the router and it works great. I can see it from the 192.168.2.x home theatre network (Belkin).I would like to expose the USB hard drive hooked to the Belkin Router to my primary network so that I can copy over my music and pictures without having to physically move the hard driveonto a PC connected to the primary domain.The Belkin router has a DMZ function which exposes an IP on its internal (192.168.2.x)network to the external (192.168.0.103) network.Is it feasible to expose the USB drive to my primary home network?
View 1 Replies
View Related
Oct 20, 2012
Belkin N600 ADSL Dual Band wireless Router is terrible from my own experience and every article I read from other users on Virgin Media. At minimum, there is a cmpatibility issue. cannot find one article that resolves issues of wireless interuption, slow speeds, and disconnects. I'm ready to dump this 70 GBP device and spend another on netgear.
View 1 Replies
View Related
Nov 1, 2012
I have a 3 story townhouse and want to have one n600 connected to my modem on the 3rd floor and then have the other downstairs connected through wireless to the one upstairs. I have seen lyncsys will do this but will the belkins?
View 1 Replies
View Related
Dec 12, 2011
My main Internet connection is a frontier modem /router It is on the main level of the house. In the basement I am trying to set up the cisco E3000 through an Ethernet cable.
View 4 Replies
View Related
Nov 18, 2012
I got the N600 DB Wireless Dual-Band USB Adapter in October 2012. How do I install it on Windows 8?
View 1 Replies
View Related
Apr 1, 2013
I have belkin n600 hd wireless dual band n router f7d8301 v1. do i need to do any firmware upgrade? should i down load and install V3 of firmware of V1 only? i want to increase / enhance the range of WiFi.
View 1 Replies
View Related
Jan 19, 2013
Immediately after a power outage, my internet connection predictably drops after a set period of time or usage. It is either after about 30 min or 5-15 mins of watching Netflix. I have a modem hooked up to a wireless router and use the network on my iPhone, laptop and Roku. Since the problem, I have dropped to just having my laptop connected but this has not worked. The wireless network will disappear after the 5 - 20 mins, the light on the modem and router will show no internet (all other lights are normal). Internet connection will be reestablished if I either unplug both the modem and the router (not just one or the other) OR if I unplug the ethernet line from the modem to the router and plug it directly into my laptop (the internet light on the modem will go from "off" to "on"). Despite internet connection working from transferring from the router to the laptop if I connect it back to the router, the internet lights goes off again (resolves upon unplugging and plugging modem and router back in). The internet has not yet dropped when it is physically plugged into my laptop.
I have tried the following:
-Powercycling (temp fix until it crashes again)
-Plugging into a different outlet (I cannot connect it to a different phone line, only have 1 with DSL. Also, I do not have phone service or cable, just internet via DSL)
-Resetting modem
-Resetting 2 different routers
-Calling ISP, their test of the modem was inconclusive
Again, my wifi does not see my network whenever the internet is dropped or the ethernet cord is unplugged from the modem. The outlets I have it plugged into has some type of electrical issue, two electrical devices have shorted out in the room they are in. I do not think this issue is electrical, everything seems to have constant power (unless the power outage shorted out something in the modem). Below are some details of my modem and router. I will provide any additional info requested. I will gladly buy a new modem but I want to see if it can be fixed first.
My modem: Westell
WireSpeed Dual Connect
Model: A90-210030-04
DSL Statistics
Line State: Up
Modulation: G.DMT-Mode
Data Path: Interleaved
[code].....
Router: Linksys E2000 Internet Connection Type: Automatic Config - DHCP (I tried PPPoE and it never got a valid IP address from my ISP)
View 3 Replies
View Related
Oct 21, 2012
I have decided to buy belkin n600 router. my question is can i connect Belkin wireless range extender n300 to belkin n 600 for beater coverage. is this possible ? if possible how many extender i can connect to the router and also can i connect extender with wire and wireless.
View 12 Replies
View Related
Nov 24, 2012
I reset the f5d9321 router and no connection with modem, power cycled the modem and router and still no connection with the modem. Pc and laptop can connect to internet by connecting to modem. The router worked fine 3 days earlier.
View 1 Replies
View Related
