N600 Belkin Router - Wireless Works But Wired Doesn't

Dec 25, 2011

I'm trying to set up a wireless network for my parents. I have a Belkin Play N600 router (model F7D8302) that I'm trying to hook up to an Acer desktop running Vista. The modem is a Siemens Speed stream 4100. I have a cable going from the ethernet port of the modem to the modem port on the router. The pc is connected to one of the other four ports in the router. The wireless works fine, but I can't get the wired connection on the desktop working. The Internet light on the modem is not on, but the modem works fine when connected directly to the pc. I've tried power cycling and resetting everything, but it's still not working.

View 9 Replies


ADVERTISEMENT

Netgear N600 Wireless Connection Works But Wired Not Working

Dec 9, 2011

I have my internet hooked up to a DSL Modem and a Wireless Router. But I had configured the Wireless Router wrong that I couldn't connect to it using a WiFi. I was going to reconfigure it but the Netgear Router was outdated that their reconfiguring URL no longer existed. So I went out and got a *NEW* Netgear Router. Prior to the *NEW* Router I had a Laptop and a PC connected via DSL Cable connected in the Wireless Router. Now with the *NEW* Router I had just purchased I connected everything just like I had done with my previous Router. Wireless Connect works great but I can't connected using the DSL Cable connection. It does not respond. I tried connecting the cables to different ports but it didn't work. My PC mainly needs the wired connection cuz it's where I play my Online games. I tried playing with my Wireless connect but it lags very bad. How to get the wired connections to work? Netgear N600 Wireless and Dual Band Router

View 3 Replies View Related

Linksys Router E1550 - Wireless Works And Wired Doesn't?

Nov 17, 2011

I have a Cisco linksys router e1550. My wireless network is working fine, but my wired (PC) is not working?

Removing the router and having the modem connected to my PC works but when I put on my router my wired connection only works for a few seconds to none

So I think the router may be causing it, could it be the settings? Even though there at default.

View 1 Replies View Related

Linksys E1000 V2.1 Router - Wired Works But Wireless Doesn't?

Nov 16, 2011

About 6 months ago I bought a new router (Linksys E1000 v2.1) which worked great right out of the box. A couple months later I tried to setup a home network so that my two laptops could access a shared drive on my wired desktop, but for some reason they didn't show up as being on the same network. All computers involved are running Windows 7 if that matters.

Upon a recommendation from I friend I put DD-WRT on the router and it worked fine. Setup MAC filtering and WPA2 Personal security. This worked fine for about 4 months until today.

When I got home from work today I noticed my laptop wouldn't pull up any web pages, but it said it was connected. Then I noticed my iPhone wasn't connected either. I restarted my laptop and then it wouldn't connect to the wireless either (I could see the wireless, but I would get a Could not Connect error when I tried to connect to it).

I went to my desktop and it is working just fine, it is plugged into the back of the router. I also have an AT&T MicroCell (cell phone booster) that is plugged in to the back of the router and it works fine too.

I removed the encryption and MAC filtering. I then reset to factory (or "factory" DD-WRT) and now the wireless works, but it is MUCH slower than my desktop. I ran a speedtest on my desktop and got 12 Mbps down and 1 Mbps up. On my laptop, I get 0.03 Mbps down and 0.25 Mbps up.

View 4 Replies View Related

Limited Or No Connectivity Via Wired LAN - Belkin DB N600

Jul 19, 2011

I just purchased the N600 DB Wireless Router with my ISP (Road Runner) I can connect wireless thru a laptop and a tablet, but when I try to connect wired(LAN) thru desktop (XP Pro SP3) I receive the Limited or No Connectivity. If I bypass the router and plug straight into the cable modem I can connect without issue. I have tried resetting the router, modem and computer to no avail.

Here are the results for ipconfig and ipconfig /renew C:>ipconfig

Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :

[Code].....

View 13 Replies View Related

Belkin N600 DB Wireless Router Is Getting No Internet Connection From Modem?

Jan 18, 2012

Just purchased a Belkin N600 DB N+ Wireless Router because the wireless on my Actiontec PK5000 really isn't so great. When I hook up the router to my modem and after running the install CD I couldn't get connected to the internet. So I looked at my modem and noticed the light where I had plugged in my router VIA ethernet wasn't lit up like the rest of my ethernet ports even after switching them around.

View 6 Replies View Related

Belkin Routers :: How To Bridge N600 DB Wireless Dual-Band Router F9K1102

Dec 31, 2012

Is there a way to Bridge N600 DB Wireless Dual-Band N+ Router F9K1102?

View 1 Replies View Related

Workgroup Works Great When Hardwired To Router / Doesn't With Wireless

Nov 28, 2012

I have a win7 desktop upstairs with all of my media on it.I also have a winXP laptop that I would like to use as a media center running xbmc connected to my tv downstairs.I have set up a workgroup so my laptop can access the media stored on my desktop and everything works great when they are both hardwired to my router (Linksys E3000).However, as soon as I unplug my laptop from my router and switch to the wireless connection I can no longer ping my desktop or access the shared folder (internet still works fine on the laptop, it just cant see my desktop anymore).If I plug it back in to the router, everything works again.

The exact error message I get when I try to access the shared folder is "\INFINITYMedia is not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. [code]

View 14 Replies View Related

Wireless Works Wired Does Not After Installing New Router

Feb 3, 2013

Intalled a new router (Linksys Cloud 1200) yesterday. Immediately after that the 2 computers that were connected to the network could no longer access the internet. My laptop and my ipad can access the internet wirelessly. The laptop which was not connected to the network when I connected the router can access the network both wirelessly and wired. Printers attached to the network will print without a problem.Finally I took an old computer out of storage (running WinXP) and hooked it up to the wired network. It too has no problems accessing the network. So have to assume the issue is a software issue with the two computers that were hooked up to the network when I changed the router.I have read the posts here - I did a stack reset on one of the computers but no luck. I removed Norton 360 and Team Viewer which in other posts people said they had issues with...to no avail.

Since I dont have a wireless connection to the 2 computers that cannot access the internet - I cannot download TSG SysInfo. However here I did copy the ipconfig lines below from the desktop thats not responding. [code] Was working fine until I replaced the router. I tried going back to the oldrouter (Netgear) same issue - no wired internet connectivity.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Wifi Works But Ethernet Doesn't Work?

May 1, 2013

I have a E4200 v1, connected with a few PCs by ethernet ports and various devices by wifi.  Now the wireless devices work perfectly but sometimes the PC via ethernet ports cannot connect to LAN and internet.

View 2 Replies View Related

Belkin N600 Router To Modem With Only One Port?

Nov 27, 2012

My roommate and I have High speed cable internet and the modem is set up in his room. I bought a n600 belkin router and a usb wireless adapter so my computer in my room will get internet. Only problem is there is only one ethernet port on the modem that the internet provider gave us and of course that is taken up by his computer. How do I hook up the router to the modem and get all this to work so I can get on the internet as soon as possible?

View 1 Replies View Related

Belkin N600 Router Can't Find Other Settings

Nov 5, 2012

I just updated my router to a Belkin n600 hd dual band n router. anyway i set it up one band for the "family" on 2.4 gig and my gamer on 5 gig. But the problem is none of my desktops and my latptop doesn't see the 5gig at all the only thing that picks it up is my ipad.

View 5 Replies View Related

Belkin Routers :: N600 Using Both Frequencies On Router

Apr 20, 2013

I have a wi fi capable blu ray player which works on wireless g connections, and I also have 2 computers. I have the N600 Dual Band router, and want to know if it is possible to transmit on both frequencies? I am only seeing the 2.4ghz show up for a connection.

View 1 Replies View Related

Belkin N600 Router Intermittent Connection To Network

Oct 15, 2012

I have a Compaq with XP wired on a Network with a Belkin N600 Router.There are 5 computers on the Network, (4 wired, one wireless) and this is the only computer that I have problems with connectivity. It connects to the Belkin through 2 switches.Typically when I turn the system on it connects, downloads mail, etc. After a short period of time there is no connectivity to the network for printing nor the internet.I may get connectivity randomly again after a while, but you never know if or when you will get connectivity again for sure. I am using Explorer.I had loaded some Belkin software with no luck so I uninstalled it. The other computers have no special software for the router.

View 1 Replies View Related

No Wired Connectivity With Router (Netgear N600 WNDR3800)

Nov 3, 2012

I tried using an ethernet cable (cat 6) to connect my laptop (Sony VPC-1190X) to our gigbit router (Netgear N600 WNDR3800), but I get a message that there is no internet connectivity and the light representing that port on the router does not turn on.So, dead ethernet port on the router? Nope - unplugged the working printer from the router and used that ethernet port - same result.so dead ethernet port on the laptop? Nope - plugged the laptop into a gigbit switch (D-link DGS-2205) and instantly got internet connectivity. Note that this switch is plugged into the aforementioned Netgear router.For good measure, I tried power-cycling the router and laptop.

BTW - I can connect the laptop to the router wirelessly but I am trying to make use of the faster transfer speed of the ethernet connection.

View 5 Replies View Related

Belkin N600 DB Modem / Router (F9J1102) Dropping Connection

Feb 6, 2012

I'm trying to install a new modem/router (the above) and am having a few problems. The install seems to have gone fine and the firmware has been updated to the latest version. PCs/laptops/PS3s/phones can all connect to the router both wired and wireless. But the modem seems to be dropping its connection to the internet at regular intervals - sometimes every 15mins, other times less. The security log mentions "PPPoE disconnected" after which it reconnects.Has anyone got an idiot proof list of what I should be checking? My old Net gear DG834PN does not have this problem at all so it really has to be the router rather than the line - at least that is my guess.

View 2 Replies View Related

Belkin N600 / Cannot Connect One Laptop To Wireless

May 20, 2011

I have a belkin N600 I believe and I ran the ipconfig/all and got this

Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersMichael>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Nero
Primary Dns Suffix . . . . . . . :

[code]....

also every other device I have can connect except one laptop, ipod, printer, xbox360 all connect just fine. and I have tried iprelease and renew.

View 5 Replies View Related

Belkin Routers :: Using N600 As Wireless Adapter?

Jun 7, 2013

Upstairs I have a Century Link modem/wireless router. My wife and I use our laptops, smart phones, and XBox 360 on the wireless network. Downstairs I have an older Dell PC that I use for my business. I have an Ethernet run from upstairs to downstairs. The Ethernet jack upstairs is near a cable outlet because we used to have cable internet. Now we have DSL and the phone jack is on the other side of the room. Here's my question... I have a Belkin N600 wireless router, is there any way I can plug it into the Ethernet port on the other side of the room, and use it like a wireless adapter? I have tried a few time to set it up as an "access point" but it doesn't seem to work. As soon as I do, I can no longer access the Belkin router to make any changes and I need to do a manual reset. can I plug my downstairs PC into the Belkin N600, and have wi-fi internet access from the wireless modem/router upstairs?

View 2 Replies View Related

Wireless :: Wireless Not Works But Wired Network Works

Apr 6, 2011

this computer was working on this router no problem. computer crashed and noiw computer is fine i connected it to my cable from ny desk top comutyer and works fine. It just cannot hook up to the wireless connection?

View 1 Replies View Related

Belkin G Wireless Router Doesn't Work?

Mar 29, 2011

I have this Belkin wireless g router, which I had for a year. I was using the wired connection since then until I, at last, was able to use it's wireless connection but it only lasted around a week. After that, the modem light on the router kept on blinking and the internet light wouldn't turn on. I also couldn't connect to the router anymore(wired and wireless), neither could I configure it. I reset it but it still didn't work.

View 1 Replies View Related

Belkin Play N600 Exposing USB Hard Drive Attached To Router Within Sub-network

Aug 30, 2012

I recently purchased the Belkin PLAY N600 router to create a private network for my home theatre setup.I have a primary home network 192.168.0.x (NetGear) which I use for all my computing needs. I extended a network cable to my Home theatre area and plugged in the N600 router. After this, I attached a USB external hard drive to the router and it works great. I can see it from the 192.168.2.x home theatre network (Belkin).I would like to expose the USB hard drive hooked to the Belkin Router to my primary network so that I can copy over my music and pictures without having to physically move the hard driveonto a PC connected to the primary domain.The Belkin router has a DMZ function which exposes an IP on its internal (192.168.2.x)network to the external (192.168.0.103) network.Is it feasible to expose the USB drive to my primary home network?

View 1 Replies View Related

SMCD3G Cable Modem / Belkin Play N600 Router - Small Office Network?

Apr 21, 2011

I'm trying to network a small office and have the following devices:

SMCD3G Cable Modem
Belkin Play N600 Router
Digi Mil-H1130 8 Port Ethernet SOHO Hub
Hubbel Cat5 Patch Panel (goes up to 12)

We're replacing our DSL line with a Cable line. Our DSL was a one piece wireless router/modem. When it was installed, it was inside our office, next to the server, and plugged into Wall Jack 1 for all the other computers to connect to. Our server plugged into this modem/router. We didn't have the Belkin Router at the time. The Patch Panel wires went into the Hub behind our office and everything was fine.

The cable modem is now next to the Hub and Patch Panel. I bought the router since we didn't have the wireless feature that the DSL had and everyone I spoke to said I need a router to set up the office. I ran one of the LAN lines from the modem into the Router where it says Modem (WAN). From the Router, I ran the line 1 (LAN) into the Hub. (Does the number matter if nothing is plugged into it in our office?) No computer is able to connect to the internet except my laptop which connects wireless. It works fine.

Another problem. We have a server computer that's Unix based. In order for anyone to connect to the server to access the office software used, the IP address of the router must be 192.9.2.1 or the computer your using won't connect via Multiview 2000 Terminal Emulator. I can't connect to the server because the IP address of the router is still 192.168.2.1. I don't know where I have to go in the router settings to change it. I've tried a few spots and it tells me the IP address is invalid. The settings I had with the DSL modem/router were:

Modem IP address - 192.9.2.1
Subnet Mask - 255.255.255.0
DHCP Start Address - 192.9.2.100
DHCP End Address - 192.9.2.150

It's not like I need to run wires. Everything is set. If something is plugged into a wrong spot, I can switch it.

Additional info:
There are 4 computers in the office and 8 numbered wall jacks.
Server computer - Wall jack 8 (IP address of this machine - 192.9.2.25)
XP Machine 1 - Wall jack 4 (can't connect to server! No internet.)
XP Machine 2 - Wall jack 1 (Is able to connect to the server! No internet.)
Win CE Machine - Wall jack 9 -

I assume. I have a wire that goes through the wall on this machine and it isn't marked. (Rarely used so not sure about server connection)

Wireless Windows7 laptop - connects to the internet fine since it bypasses all these wires. Can't connect to server.

Under the DHCP client list, only 2 computers are listed. The one that has internet is my computer. The other computer listed is wall jack 4 and that has internet now.

my computer - 192.9.2.2
wall jack 4 - 192.9.2.3

The router IP is 192.168.2.1 and the Cable Modem is 10.1.10.11. If I type either number into my web browser it will take me to the router setup page. I don't know where/how to check if it's only one device acting as DHCP. What I want to do is be able to get online with all the computers as well as have access to the software on the server through the office wall jacks. In order to do that I need the router IP address to be 192.9.2.1 and then I'd be able to connect to it.

Right now, one computer is able to connect to the server via hard wire but can't connect to the internet.Another computer is able to connect to the internet via hard wire but can't connect to the server.My laptop can connect wireless to the internet but not the server. In a perferct world, all the computers should be able to connect to both the internet and the server. Right now, it's one or the other with both hard wired machines and I don't know why. Is there a wire not in the hub right? Is a patch panel wire plugged into the wrong port of the hub? I don't know what's supposed to go where. tell me "wire X from the modem goes to Port Z of the router, and Wire Y from the the router goes to number V on the Hub, and that wire goes to number T on the patch panel for the Port number R in the office to work..." I'll try it.

Then I think all I need to do is change the router's IP address to 192.9.2.1 and everyone should be able to connect to the server through the Multiview 2000 Terminal Emulator.When I tried to change the IP address on the router it's telling me it's not valid. Under LAN settings it says 192.168.2.1 - when I try to change it to 192.9.2.1 it tells me LAN IP address is invalid. I clicked on More Info below that in the router page and a pop up gives me info. It says:

The "IP address" is the Internal IP address of the Router. To access the advanced setupinterface, type this IP address into the address bar of your browser. This address can be changed if needed. To Change the IP address, type in the new IP address and click "ApplyChanges". The IP address you choose should be a non-routable IP. Examples of a non-routable IP are:

192.168.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)

10.y.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)

172.z.y.x (where z is anything from 16 to 31, and y is anything between 0 and 255, and x is anything between 1 and 254.)

View 4 Replies View Related

Virgin Media Adsl Wireless Settings Belkin N600?

Oct 20, 2012

Belkin N600 ADSL Dual Band wireless Router is terrible from my own experience and every article I read from other users on Virgin Media. At minimum, there is a cmpatibility issue. cannot find one article that resolves issues of wireless interuption, slow speeds, and disconnects. I'm ready to dump this 70 GBP device and spend another on netgear.

View 1 Replies View Related

Belkin Routers :: Connect 2 N600 Wireless To Extend Range?

Nov 1, 2012

I have a 3 story townhouse and want to have one n600 connected to my modem on the 3rd floor and then have the other downstairs connected through wireless to the one upstairs. I have seen lyncsys will do this but will the belkins?

View 1 Replies View Related

Slow Wired Connection On Netgear N600 WNDR3700v1 Dual Band Gigabit Router?

Aug 6, 2012

I have a Netgear N600 WNDR3700v1 Dual Band Gigabit router and am having a problem with the wired connection with my PC. Everything wireless in the house works fine. In fact, I also have a Direct TV box hooked up for on demand and a sling box hooked up (both wired) and they work find. It's just my PC that is having issues. If I bypass the router and hook straight into the modem, it runs fine also so I have something going on between the router and this PC. I updated the NIC driver and this did not work. Before the update in the device manager, it said it was a NIVIDA nForce Network Controller (if I remember right) and now it says NIVIDA nForce 10/100 Mpbs Ethernet. It was suggested that I change my speed and duplex to match the router after I update but I am unsure what to change it to.

View 11 Replies View Related

TP-Link 3G/3.75G Router :: MR3420 - Works In 3g Only Doesn't Work In 3g Preferred

Dec 24, 2012

Region : India
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : Reliance

I've just set up a MR3420. It works fine in "WAN only" mode and provides access via our ADSL modem. It also works fine in "3G only" mode and provides access via a Reliance Netconnect+ USB modem (a Huawei E150 I think). I updated the firmware to the latest version in order to get it to work with the USB modem.

The problem I have is that when I set it to "3G preferred" it doesn't seem to connect over 3G. I can see it tries to connect but then fails and then WAN takes over. The connect and disconnect options are greyed out on the 3G page so I am unable to manually get it to retry. I've tried leaving it for a long time but it doesn't seem to connect over 3G ever. I've tried setting 3G to connect on demand and connect automatically but both behave the same.

View 3 Replies View Related

Belkin Router Doesn't Specifically Have Wireless Bridge Capabilities

May 23, 2012

I'm trying to set up a wireless bridge as part of my network and I'm having some issues.I'm only assuming I need a wireless bridge setup based on what I've gathered in forums such as this, but perhaps I'm barking up the wrong tree.Internet Modem --hard wire-- Belkin F9K1102 Router {{{fancy wifi waves}}} TP-Link TL-WR340G Router --hard wire-- CPU..I already have a working wireless/wired router (Belkin) that I use to get online. I have a CPU that can only connect to my network via hard wire in another room. Running a hard wire from my Belkin router to the CPU is NOT an option. Therefore, I would like to use my TP-Link router (which has built in WDS wireless bridge capability) as a wireless bridge and have it connect to my Belkin router and thereby the network and the internet via wifi. I will then connect my CPU to the TP-Link router via hard wire.

I've tested both routers directly and independently connected to the modem and they both work fine. The issue I have is only in trying to get the bridge between them to work. I've followed various tutorials (TP-Link website, YouTube videos, site like this one, etc.) to no avail.I know that my Belkin router does not specifically have wireless bridge capabilities, but I'm not sure if BOTH routers having this capability is necessary for a wireless bridge to work or not.I also have multiple screen shots of the router configuration settings for both routers which can be provided if need be.

View 8 Replies View Related

Belkin Routers :: N600 DB Wireless Dual-Band USB Adapter / Windows 8

Nov 18, 2012

I got the N600 DB Wireless Dual-Band USB Adapter in October 2012. How do I install it on Windows 8?

View 1 Replies View Related

Belkin Routers :: Firmware Compatibility With N600 Hd Wireless Dual Band

Apr 1, 2013

I have belkin n600 hd wireless dual band n router f7d8301 v1. do i need to do any firmware upgrade? should i down load and install V3 of firmware of V1 only? i want to increase / enhance the range of WiFi.

View 1 Replies View Related

Wireless Internet Works Weird Doesn't?

Jan 15, 2012

hen its wireless, it has no problems with the internet, everything works fine.But when its wired, webpages will still load, but youtube videos wont work, anything that consists of streaming doesn't work, and he cant even useI have connected other laptops to the same cord and there is no problems. so i know its not the cord and i imagine its not the router since everything still works fine with other computers.

View 5 Replies View Related

Belkin Routers :: Can Connect Wireless Range Extender N300 To N600 For Better Coverage

Oct 21, 2012

I have decided to buy belkin n600 router. my question is can i connect Belkin wireless range extender n300 to belkin n 600 for beater coverage. is this possible ? if possible how many extender i can connect to the router and also can i connect extender with wire and wireless.

View 12 Replies View Related

Belkin Routers :: F9L1101 N600 DB Wireless Dual-Band USB Adapter / No Internet

Nov 13, 2012

F9L1101 N600 DB Wireless Dual-Band USB Adapter : recognizing and connecting to wireless network but unable to use internet. Changed static IP adress, etc but no luck. Followed instructions on support email response:

Windows XP:

Start->Control Panel->Network Connections(classic view)->Right click on Local Area connection(wired)/Wireless network connection(wireless)->Properties->Select Internet Protocol(TCP/IP)->Properties->Under General tab, choose "Use the following IP address" and type the IP address, Subnet mask and Default Gateway, DNS and press OK.
Type in the ip address 192.168.2.20
Enter the subnet mask as 255.255.255.0
Enter the default gate way as 192.168.2.1
Type in the primary DNS as 4.2.2.2
Type the alternate DNS as 8.8.8.8

Am currently unstalling and reinstalling. The network is WEP with a long alpha numeric key, which was accepted and network detected and connected. No internet. No internet. No internet.

View 3 Replies View Related

Router Connected To Dead Wired Computer - Network Still Works?

Jan 25, 2011

MY ISP is AT&T. I have their Westell DSL modem, with a bridged connection to a Linksys wireless router. The router is connected via ethernet to a dead computer: a 7 year-old Dell desktop that will boot up but shut down right away. I have been able to connect multiple laptops wirelessly to this network. I thought an ethernet connection was required in a home network such as mine? The cable has been plugged into a dead computer for several months and frankly I'd like to get rid of the desktop. What exactly is the ethernet requirement - just to be plugged into a port? Could I theoretically just yank the ethernet card out of the desktop and use it instead of the whole dead system?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved