Slow Wired Connection On Netgear N600 WNDR3700v1 Dual Band Gigabit Router?
Aug 6, 2012
I have a Netgear N600 WNDR3700v1 Dual Band Gigabit router and am having a problem with the wired connection with my PC. Everything wireless in the house works fine. In fact, I also have a Direct TV box hooked up for on demand and a sling box hooked up (both wired) and they work find. It's just my PC that is having issues. If I bypass the router and hook straight into the modem, it runs fine also so I have something going on between the router and this PC. I updated the NIC driver and this did not work. Before the update in the device manager, it said it was a NIVIDA nForce Network Controller (if I remember right) and now it says NIVIDA nForce 10/100 Mpbs Ethernet. It was suggested that I change my speed and duplex to match the router after I update but I am unsure what to change it to.
View 11 Replies
ADVERTISEMENT
Oct 20, 2011
I have a Netgear N600 Dual Band Gigabit Router and my roomate and I both have the wireless xbox and when we connect to xbox live and find a game on call of duty mw2 we lagg our butt off nd we tried changing the channel on the router but it still seems to lag.
View 11 Replies
View Related
Dec 1, 2012
I confused ,with which modem to purchase to set up my n600 wireless dual band gigabit router wndr3700, i'm on boardband with no modem
View 1 Replies
View Related
Mar 25, 2011
I have a Netgear 600 dual band router connected to a DOCIS 3.0 cable modem with a 25mps internet connection from my ISP, should be fast right? When I run a speed test on my comp I get 10-13 mbps download on average. Here's the issue, upon visiting my mothers house and running the same speed test I got very similar results. She is running a Lynksys G router on a DOCIS 2.0 cable modem with 12mps connection. My question is, how can this be so, am I at the limits of my comps g network card? as a disclaimer I would like to note I am connected to the G band on both routers.
View 1 Replies
View Related
Dec 31, 2012
Is there a way to Bridge N600 DB Wireless Dual-Band N+ Router F9K1102?
View 1 Replies
View Related
Dec 9, 2011
I have my internet hooked up to a DSL Modem and a Wireless Router. But I had configured the Wireless Router wrong that I couldn't connect to it using a WiFi. I was going to reconfigure it but the Netgear Router was outdated that their reconfiguring URL no longer existed. So I went out and got a *NEW* Netgear Router. Prior to the *NEW* Router I had a Laptop and a PC connected via DSL Cable connected in the Wireless Router. Now with the *NEW* Router I had just purchased I connected everything just like I had done with my previous Router. Wireless Connect works great but I can't connected using the DSL Cable connection. It does not respond. I tried connecting the cables to different ports but it didn't work. My PC mainly needs the wired connection cuz it's where I play my Online games. I tried playing with my Wireless connect but it lags very bad. How to get the wired connections to work? Netgear N600 Wireless and Dual Band Router
View 3 Replies
View Related
Mar 24, 2011
My problem is with xbox live, i have the WNDR 3400 N600 Dual Band Router and i have been experiencing lag spikes since the day i have gotten it. I used to have a wireless adapter and i thought that was the problem so i recently went out and bought a 200 ft ethernet cable so now im hardlined to the router I have the xbox set to highest priority, i have it set with a static ip address for the dmz so i have no restrictions, i have all ports opened just in case, i have great internet speeds : 18.04 mbps download and 4.03 mbps upload and nothing seems to work.. i still have lag that sometimes disconnects me from xbox live and ruins the whole gaming experience.
View 3 Replies
View Related
Apr 14, 2010
I have the new XBOX 360 black N wireless adapter and the Linksys E3000 dual band router as I want to upgrade the network range and speed to N. I set up a unique SSID and passphrase (WPA2) for both 2.4GHz and 5GHz bands. My XBOX could connect to the 2.4GHz band network and could connect to XBOX Live. But when I configured all the settings and tried to connect to the 5GHz band network, but no luck. My XBOX just said it failed to connect. I was sure that I did type in the SSID and passphrase correctly. I still cannot figure out what went wrong. I even suspected either the wireless adapter or the router malfunctioned.
View 9 Replies
View Related
Dec 21, 2012
I use a Netgear Dual band router and it works great. I was messing with a PC i bult and screwed something up(of course) I couldn't get a strong signal on either band. I have a Belkin wireless N router that I dont use, can I use it to boost my signal?
View 1 Replies
View Related
Jan 30, 2013
Is it possible to configure the RV042G so that one WAN port is connected to an ISP with a static IP and the other to an ISP with a dynamic IP. Then, I would like to setup a VPN tunnel and use the static IP for that and have all the other internet traffic go through the dynamic IP.
I know I could set it up with the static IP as the primary and the dynamic as the backup. Then, if I lost connectivity on the static IP, I would still have internet access, only the VPN tunnel would be down.
View 1 Replies
View Related
Nov 3, 2012
I tried using an ethernet cable (cat 6) to connect my laptop (Sony VPC-1190X) to our gigbit router (Netgear N600 WNDR3800), but I get a message that there is no internet connectivity and the light representing that port on the router does not turn on.So, dead ethernet port on the router? Nope - unplugged the working printer from the router and used that ethernet port - same result.so dead ethernet port on the laptop? Nope - plugged the laptop into a gigbit switch (D-link DGS-2205) and instantly got internet connectivity. Note that this switch is plugged into the aforementioned Netgear router.For good measure, I tried power-cycling the router and laptop.
BTW - I can connect the laptop to the router wirelessly but I am trying to make use of the faster transfer speed of the ethernet connection.
View 5 Replies
View Related
Nov 18, 2012
I got the N600 DB Wireless Dual-Band USB Adapter in October 2012. How do I install it on Windows 8?
View 1 Replies
View Related
Apr 1, 2013
I have belkin n600 hd wireless dual band n router f7d8301 v1. do i need to do any firmware upgrade? should i down load and install V3 of firmware of V1 only? i want to increase / enhance the range of WiFi.
View 1 Replies
View Related
Dec 19, 2011
I am currently looking to upgrade and extend my home network with preference to dual band and gigabit functionality. My problem is choosing the correct hardware.I want dual band to separate the network for the kids (a PC, laptop, Xbox 360 and phones all wireless) and set up parental controls and maintain connection speeds etc. For my needs I need the network to be connected to my Onkyo AV Amp (for internet radio and music streaming only), Blu-ray Player, Sky HD satellite box (all wired) and a PS3 (pref wired) and a few wireless devices all N capable. Apart from the obvious gaming capability I would like to be able to stream HD video to the PS3, PC (wired) and laptops via a USB HDD connected for now on an access point or modem router to save on the cost of having separate networked devices.
I currently have ADSL so I was looking to get a dual band gigabit modem router to serve the kids wireless hardware whilst my current hardware is on another floor and is connected with a wire from the existing modem but I have to keep swapping it from PS3 to amp etc.In short I am hoping to have a gigabit, dual band ADSL modem router and connect to a gigabit access point (with dual band if possible) via the cable I have sent to the other floor to wire up the 4 devices. I've currently been looking at Netgear and Buffalo solutions as I've had problems with Linksys and Belkin routers in the past. Would this be possible with just 2 devices (modem router and access point) whilst maintaining decent speeds and if so can someone shed some light as to what I should get.
View 1 Replies
View Related
Jun 12, 2013
belkin play max n600 hd model F7D4401 Dual-Band signal very week so i need the best setup.
View 1 Replies
View Related
Nov 13, 2012
F9L1101 N600 DB Wireless Dual-Band USB Adapter : recognizing and connecting to wireless network but unable to use internet. Changed static IP adress, etc but no luck. Followed instructions on support email response:
Windows XP:
Start->Control Panel->Network Connections(classic view)->Right click on Local Area connection(wired)/Wireless network connection(wireless)->Properties->Select Internet Protocol(TCP/IP)->Properties->Under General tab, choose "Use the following IP address" and type the IP address, Subnet mask and Default Gateway, DNS and press OK.
Type in the ip address 192.168.2.20
Enter the subnet mask as 255.255.255.0
Enter the default gate way as 192.168.2.1
Type in the primary DNS as 4.2.2.2
Type the alternate DNS as 8.8.8.8
Am currently unstalling and reinstalling. The network is WEP with a long alpha numeric key, which was accepted and network detected and connected. No internet. No internet. No internet.
View 3 Replies
View Related
Feb 7, 2011
The internet at my parents house has recently gone on the fritz..the wireless router is a N600 Wireless Dual Band Router WNDR3400..The computers of the house are able to connect to it..But it does not allow internet connections..The 3 computers are an HP Laptop running windows 7.a Dell Dimension E521 Running windows 7 & and an older HP Walmart special running XP.They can connect to outside systems and through a wired connection to the Modem from Cable vision. They replaced the wireless router and the problem continues.Internet is capable by plugging directly into the Cable vision router,unfortunately do not have the cables to try through the Netgear router to test that out..
View 3 Replies
View Related
May 8, 2011
I got a NetGear DGND3300 Wireless Router Modem 3300 Dual Band from eBay only to find it will only work in USA.
View 7 Replies
View Related
Feb 24, 2013
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.17 Build 120426 Rel.29216n
ISP : Bell Canada
Just had my line upgraded to 50mbit down, and 10mbit up. Whenever the router is between the PC and the modem, my speeds drop to 30mbit. If i plug directly into the modem, I get the full 50Mbit. Upload speeds are always 10mbit.I've tried power cycling devices, and even replaced all cables with cat6 (which I know isn't the issue, but i'm just trying to eliminate everything)
View 6 Replies
View Related
Nov 27, 2011
I have had the Netgear 3300 Dual Band for three years. Everytime I wanted to access using my laptop, I had to choose between 2.4G and 5G connection. For about a month now, the 5G does not show up. It doesn't show up as a network to select no matter what device I use. I have reset the router and updated the firmware. Both connection lights are blinking. I recently purchased and IPhone 4 and still I do not have the option of selecting 5G.
View 4 Replies
View Related
Apr 18, 2011
What is the difference between Netgear wndr3700v1 and v2
View 3 Replies
View Related
Jan 29, 2013
I have just bought a D-Link DWA-160 A2 network adapter and it is really slow.I have been using a D-Link DWA-125 N 150 A2 for a while now and it is faster, getting a higher signal.My new network adapter is suppose to be faster.The only thing I can think of is that the software coming with the adapter never installed. I get an error: Wireless adapter not found! insert the adapter now.Thing is, the driver is installed and I can surf the internet.I did some speedtest net tests and I see that my DWA-125 A2 is faster.
View 4 Replies
View Related
Jun 25, 2011
I have recently purchased a netgear N300 Dual Band router. I am getting some problems with it! I replaced my bog standard belkin 54g router (which never dropped out, never lagged), you just plugged it in, stuck your isp settings in and away you went. Not the same story with this netgear, it promises to give you a better connection in game, but since installing it, all games lag, my laptop is slow browsing, it is getting to the point where we cannot game at all and I am giving up waiting for websites to load! My xbox is connected with ethernet my laptop is wireless, but both lag. Is it to do with the router settings? I am running windows 7 on the laptop, windows xp on another desktop pc, 2 xboxes, one wired one wireless and a wii wireless. All lag!
View 6 Replies
View Related
Dec 7, 2012
I currently have a NetGear WNR3500L running Tomato acting as an access point. Unfortunately, I think it's crapping out on me... Currently, there are two WiFi security cameras streaming through it to a surveillance server 24/7, and even though it is in a central location in my condo, I get shit signal ~25 feet away (and that's after cranking up the wifi radio to 60mw).
802.11n is a must, and dual SSID's would be nice too... dual band would be totally awesome but not that necessary (I still have some legacy hardware running on G...).
View 10 Replies
View Related
Apr 28, 2012
I just got a Nook Color as a gift (nice huh?) I just bought my iPad2 in Jan. So now I've got Comcast cable with a Netgear N600 router and:
1 desktop Win XP sp3 plugged into router
1 desktop Win 7 usb wireless
1 HP laptop w/ Vista
2 Dell old laptops Win XP not used much
Sony PS3 not on much
iPad2 always on
Nook Color
AND a Roku always on
I think that's all. So I'm guessing all this will slow down my whole connection? My iPad is the fastest. My Nook is extremely slow. Maybe it's the B&N website? When I go to shop and even when I registered it, it says connection having trouble. I finally had to setup my account at BN with my desktop. The Nook wouldn't stay connected.
View 1 Replies
View Related
Nov 25, 2012
My new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.
[URL]
View 1 Replies
View Related
May 20, 2007
Having a problem everytime I try to use load balance on my Rv042 it is slow as a dog and sometimes wont connect at all. if I run in smart backup mode its fine. removed firewall rebooted everything tried numerous configerations upgraded to the latest frimware just about to be convinced
View 2 Replies
View Related
Jan 29, 2011
I purchased the Netgear a couple of years ago and it worked great. Since I've upgraded to a faster bandwith from Verizon, I can't get the Netgear to work. What am I not doing?
View 1 Replies
View Related
Oct 22, 2011
I got a new Netgear N600 Router and installed. Everything works fine, except my PC, which is using a Belkin F5D8055 V2 USB adapter. My upload speeds are less than 1Mbps, while on my net book, ipad, and iphone they are 5Mbps+. I can not firgue out how to fix this. I am running Windows 7 Home Premium, SP1. My PC has an I7-920, 18GB RAM, and 2x Radeon 5870.
View 1 Replies
View Related
Feb 18, 2013
Region : Netherlands
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 130129
ISP :
I've this dualband wireless router since a week.Now I found out, NFS is working very slow (actually NFS is not working at all).I have a Mede8er and a synology NAS server connected to the TP-LINK WDR3600 router.I have movie directories shared on the NAS using NFS.when I go to the NFS locations in my mede8er it takes very long before I can see the NFS mapping.When I connect the Mede8er straight to the Synology NAS server (Cross Cable connection) NFS is working as it should be.So the TP-LINK WDR3600 cannot handle the NFS protocol?
View 2 Replies
View Related
Jun 7, 2011
I just bought a new netgear n600 now it seems all my devises are slower. 2 Xbox 360s 2 laptops. 1 pc also on my dell d610 now when i try to watch any video the internet stops working. we use google chrome. I am pretty sure its the router. we use mediacom for internet and get at least 20 mbs. oh and the slowest xbox is run with a ethernet cable so its not a wifi issue with that one.
View 3 Replies
View Related
May 22, 2011
Download speeds, per speedtest.net and speakeasy, are about 20mbps.When the speed test gets to the upload part, it usually hangs or takes a long time before giving me a result of about 0.04mbps. Basically, it's so slow, it sometimes just gives up and times out.This translates into a real shoddy internet experience because something as simple as choosing airline tickets requires your computer to "upload" your choices. And of course, if that doesn't happen within a certain amount of time... Timeout! I have tested the connection without my Netgear FVS336G Dual WAN router in the way and it is much better so I'm certain it's the router.When I tell the router to use WAN 2, which is where my AT&T DSL connection is on, the upload works just fine (about .4 mbps - I'm provisioned at 512kbps so it's fine).Also, this is the case on ALL computers on the network - wired, wireless, PC, Mac, iPhone, iPad, you name it. So, it's definitely not device specific.
View 1 Replies
View Related
Feb 11, 2013
Region : Netherlands
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 121225
ISP : Online
Recently I replaced my Linksys WRT54G for a TP-Link WDR4300. But unfortunately this did not result in an increased speed.On both the 5GHz and 2.4GHz speed is limited to roughly 2.5-3 MByte/s, which is OK for watching movies etc. but I could reach those speeds with the 802.11g router as well!
I'm using the WDR4300 as access point, so I disabled DHCP server and NAT functionality, left the WAN port empty. And I set fixed IP in the subnet range of my modem/router. (horrible Speedtouch device). All works fine and stable, but too slow.
In the wireless settings I tried the 20 and 40MHz bandwith, disabled WMM, tried to lower the transmission power, tried to set a fixed channel. But all those changes do not have a significant influence on the transfer speed. (both on 2.4 and 5GHz) I'm the only 5GHz access point in my neighborhood, so interference cannot be a problem.
The clients indicate a link speed of 300mbps very close to the router, and this drops to indication of 54mbps further away, but effective link speed remains fairly constant (and stable!) (I find it strange that indicated link speed already drops at 3 meters with clear line of sight to the router)
I did the tests with fixed IPs on two laptops and no devices connected on the LAN ports, to rule out problems caused by the modem/router or other clients.The tests were done using a Lenovo x220 and Asus Zenbook, both with Intel dual band 802.11n wifi interfaces. The Lenovo reaches 22MByte/s via the Cisco access point at my work (with less signal as at home).
View 6 Replies
View Related