I got a new Netgear N600 Router and installed. Everything works fine, except my PC, which is using a Belkin F5D8055 V2 USB adapter. My upload speeds are less than 1Mbps, while on my net book, ipad, and iphone they are 5Mbps+. I can not firgue out how to fix this. I am running Windows 7 Home Premium, SP1. My PC has an I7-920, 18GB RAM, and 2x Radeon 5870.
View 1 RepliesI'm having a big trouble with my internet connection. The Upload speed is extremely slow after i got a new mainboard, that problem appears.[code] I'm tired with my suck internet connection! Upload a 1MB photo to Facebook took me hours..This problem has started for a week.
View 1 Replies View RelatedDownload speeds, per speedtest.net and speakeasy, are about 20mbps.When the speed test gets to the upload part, it usually hangs or takes a long time before giving me a result of about 0.04mbps. Basically, it's so slow, it sometimes just gives up and times out.This translates into a real shoddy internet experience because something as simple as choosing airline tickets requires your computer to "upload" your choices. And of course, if that doesn't happen within a certain amount of time... Timeout! I have tested the connection without my Netgear FVS336G Dual WAN router in the way and it is much better so I'm certain it's the router.When I tell the router to use WAN 2, which is where my AT&T DSL connection is on, the upload works just fine (about .4 mbps - I'm provisioned at 512kbps so it's fine).Also, this is the case on ALL computers on the network - wired, wireless, PC, Mac, iPhone, iPad, you name it. So, it's definitely not device specific.
View 1 Replies View RelatedI just bought a new netgear n600 now it seems all my devises are slower. 2 Xbox 360s 2 laptops. 1 pc also on my dell d610 now when i try to watch any video the internet stops working. we use google chrome. I am pretty sure its the router. we use mediacom for internet and get at least 20 mbs. oh and the slowest xbox is run with a ethernet cable so its not a wifi issue with that one.
View 3 Replies View RelatedAt the recommendation of a tech, I ran a speed test (speedtest.net) on my system with my N600 in place. The upload speeds averaged out to 0.21mbps. I took the router out of the system and the speed climbed to an average of 0.37. What is the problem with the router and what need I do to boost the upload speed with it in place?
View 1 Replies View RelatedRecently my desktop has experienced very slow download speeds (~0.11 Mbps), however the upload speed appears to be in line (~2.0Mbps). These numbers are taken from Comcast's speed test (my ISP). It is obviously a problem with my PC because everything else on the network (PS3, Laptop) have great signals with no problems. I just recently reverted the Desktop back to its factory state, and everything was working fine for a couple of months. The desktop in question uses Vista 32-bit and the Belkin Basic USB Wireless Adapter.
View 1 Replies View RelatedI live in the tampa bay area, I have bright house (BHN) as my service provider, which provides a Road Runner Lightning (40/5) package. I previously used BHN's top tier (20/2) back in July (and prior) with no problems.
After converting to Lightning in August of this year (2010). Of course, BHN (and every other provider) wants to force a modem/router down your throat, so I had them bridge it (in short, turn it into a dummy modem with no routing). I had an SMC branded modem gateway at the time. I work from home 2 days a week (so I can spend more time with my kids during morning, lunch, right after work) and this requires me to use QoS to ensure my VOIP work calls don't get dropped, if the family is watching youtube videos or watching netflex.
My network was as follows SMC Modem >WAN IP>>WAN Port>>D-link DIR-655>>Switch Ports>PC1, PC2, PC3
Everything seemed fine (from a usability stand point) till about 2 weeks ago when my upload speed seemed to grind to halt. Normally I was able to upload about 200-300K per second, and I noticed this dropped to about 45K per second during a drop box upload. First thing I did was power cycle both my modem and router (in the proper/usual order). After they both come up, I start using speed test to find out what my upload speeds were. I was getting about 39Mbps down, but only .56Mbps up still. I factory reset my router.... test, similar speeds. Power cycle all computers (just in case), and then modem/router. Tested, similar speeds. Updated the firmware to the latest. Same issue
Called BHN customer service, they factor reset it, but it wasn't in bridge mode. If I by passed the 655, in factory mode (non bridge mode) upload speeds returned to better than expected states. If I bridged the cable modem, upload speeds seemed to crash.
Had BHN replace the modem, seemed fixed for a day, then issue came back. Had them come back out and replace it again, this time with a Motorolla Surfboard modem... same issue. Fine during factory reset, however after they bridge the modem, upload speeds were fine. Told BHN I would take it from there.. Connected up the DIR-655, and upload speeds crashed again. (.6Mbps). Called D-Link Support, and the Chinese English speaking rep seemed to not be listening to me and tried to have me adjust my MTU as well as Wireless settings. Long story short... the rep was a level 0 id10t and I hope D-link will consider hiring better employees/contractors. So I was all about to give up and replace it with a DD-WRT capable router (which it takes me a lot to want to swap hardware), when I discovered the wan shaping was on. Which I thought to myself... nah... QoS has never messed up before... why would it be the cause. Turned off wan shapping... and voila. Issue seemed to be insta-resolved.
Unsatisfied with that... I decided to dig a lil deeper. I turned on Wan shaping again, but decided to set the settings manually instead of auto detect.
Here are the settings I used... (Advanced Tab>QoS)
Enable Traffic Shaping - Checked
Automatic Uplink Speed - Unchecked
Manual Uplink Speed - 5000
Connection Type: Cable or Other Broadand Network
Enable QoS Engine - Checked Automatic Classification - unchecked (this checked seemed to affect my upload speed by about 5-10% during testing) Dynamic Fragmentation - unchecked (this checked seemed to be the worse enemy for upload speed)
While I know I'm not any network guru (still have to use a subnet calculator for subnetting), I think I did a pretty good job drilling down the issue (once I got passed my service provider replacing modems).
Anyways, I've had overall good luck with D-Link products, even have a 5 port 10/100 switch (all metal) from 1998 that works great. Hopefully, D-Link will just either put more documentation on the web, or hire better employees.
Slow browser speed on all browsers, but the downloading and uploading speed are normal according to speedtest.net. Ping is a bit high. Other computers in the house are fine.Already contacted ISP (Time Warner), modem is not the problem Contacted Linksys router support, router is fine. anti virus plus malware byte.
[code]...
I have a problem concerning my Netgear XET1001 85 MBit/s Wall-Plugged Ethernet Adapter. My personal computer in my room is connected directly to our router and I'm getting arround 14-15Mbps download speeds. My parents computer is located in a different room and I bought them the Netgear Adapter thinking this was the most effective and simplest solution. Better than a Wifi-Adapter. I cost me quite a lot too to be honest. The problem is my parents are getting speeds of 0.05Mbps and the browser often doesn't even load the pages completely. To me it seems like the data can only travel through the thing very hardly if at all.
We thought this might have to do with the age and RAM of our computer. (512MB of RAM) So we bought a new one a couple of days ago. Turns out: nothing has changed.
The Wall-Pluggs are connected directly to the outlet by the way. I'm trying to give you the most amount of information I can think of so one more thing might be important. Yesterday I brought my parent's PC into my room, connected it to the Wall-Plugg and got speeds of 5Mbps. Although this is better, it's not what I bought this thing for. Even a WIFI connection would be faster would'nt it?
Having a bit of a quandry. I have one laptop, a Toshiba Satellite L500-2H, that seems to get ridiculously slow wireless speeds sometimes. Like, slow to the point of not even being able to load webpages. Or taking way too long to do so. Either it cripples along or can't load outright.sometimes the Toshiba will do exactly what it's supposed to and pull 20 megabits/s on speedtest.net, which is what the others do.
View 14 Replies View RelatedRegion : Others
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : wr841nv8_en_3_13_27_up_boot(121101)
ISP :
I followed TP-Link's guide to set up a WDS connection between my two brand new WR841ND router. It theoreticaly "works", but the network is extremly slow. Copying a ~100 Mb sized file to another computer on the other side takes more than 10 minutes or more, I don't know exactly, because I shut down the process after 10 min. I pinged the "slave" router with 200 packets, and I realized that every third, fourth and fifth packet has more than 500 ms time. The minimum is 4 ms, the longest was 566 ms.
Router A (Master)
Connects to the internet/ADSL
DHCP enabled
[Code].....
I bought the two router from the same dealer, at the same time. Both have the same firmware. I checked all the chanels, and 5 is the only free one, but the situation is the same on every chanel.
What can couse this very slow transfer speed?
I ru n the speed test from my desktop and laptop and the download speed are in the same range in both pc's, around 20mb/s. However the upload speed is higher in the laptop (around 4 mb/s) compared the desktop (300 kb/s)My connection is supposed to run at 50 mb/s and 5mb/s?
View 9 Replies View RelatedI was wondering why my upload speed btw the test. and reading this forum post: Sudden slow upload speed?
View 1 Replies View RelatedThis is the first PC I have ever built, but I built it with a buddy who is very experienced and everything went okay. The computer is maybe 3-4 weeks old now, everything is running fine, until today when I decided I wanted to try streaming some Diablo 3.This is when I discovered my upload speed was absolute garbage.I have verizon FIOS - I pay for 15/5, the download speed is always at 20+ mbps, I have never had any problems with it., but my upload speed is fluctuating between .34-1.5 mbps, changing every second.I know this is a problem with the computer because I brought in my old laptop, unplugged the ethernet from my new desktop, plugged it into the laptop in order to keep all variables the same, and it was getting 25/5 without any hesitation.When I was downloading the drivers for my mobo I installed something called Windows Firewall with Advanced Security(maybe that was with a windows update, im not sure).
Specs of my PC (if this matters)
-Asus P8Z77-V LK
-8g ddr3 Ripjaws
-i7 2700k
-Corsair H60
-EVGA GTX 670
-Crucial 128g M4 SSD
-Caviar Blue 1TB HDD
-750W OCZ Modular PSU
After every attempt and changing of radios still download and upload was very slow.
View 1 Replies View RelatedI just got a Nook Color as a gift (nice huh?) I just bought my iPad2 in Jan. So now I've got Comcast cable with a Netgear N600 router and:
1 desktop Win XP sp3 plugged into router
1 desktop Win 7 usb wireless
1 HP laptop w/ Vista
2 Dell old laptops Win XP not used much
Sony PS3 not on much
iPad2 always on
Nook Color
AND a Roku always on
I think that's all. So I'm guessing all this will slow down my whole connection? My iPad is the fastest. My Nook is extremely slow. Maybe it's the B&N website? When I go to shop and even when I registered it, it says connection having trouble. I finally had to setup my account at BN with my desktop. The Nook wouldn't stay connected.
I am having a problem with my newly purchased Linksys E1000 router, I am having terribly slow network speeds while on that network.
Here are my network speeds with The e1000: (wireless) And here are the speeds with my old wrt54g: (Wireless) Here are the results directly hooked up to the modem: (wired)
I've tried setting the MTU to 1500, did a RMA with Linksys to see if it was a hardware problem, did a firmware update to the e1000, disabled DHCP and SPI, reseted my router and my modem....none of those things have worked
My ISP is comcast and I have a Arris TM502G modem
Been plauged with some slow speeds lately and decided to check the speeds, with cable in modem i have 4.9 mbps upload but when i go through the router i have 0.3 mbps. Router is relatively new, just a couple months, firmware 8.00.
View 5 Replies View RelatedI am using a Cisco RVS 4000 to test a new 10M/10M internet connection. I'm having a small problem performing the ISP's speed test (speedtest.cavtel.net). The download test consistently gives me 10Mbit/s, full speed for the connection, however the upload speed is usually about 5.5 Mbit/s. My ISP has been onsite and has checked the lines and tested directly, and we have determined that if connected directly we can test to full upload speeds, but when the RVS is connected, we cannot get full speed.
We've tried different cables, reseting to factory defaults, updating firmware, changing port settings, and toggling most of the other setting on the router. Some settings do have a minor effect on the upload speed, but nothing that gets me back up to 10Mbit/s.
I did notice that there appears to be no way to set speed and negotiation settings on the WAN port. Perhaps I am missing it, because that seems like a possible culprit.
Otherwise, the only only thing I can think of is a warranty return to determine if the unit itself is defective.
I bought an E2000 router as a replacement for my WRT54G router, since my internet speeds had been upgraded. But this E2000 router has been giving me nothing but trouble.
Wired through both the router or modem, I get my topspeed of 110mbps. However, as soon as I switch over to the wireless N function, my speed drops to only 25mbps. As far as I know, wireless N should have a much faster speed than that. Even my old WRT54G had faster speeds than this new router has. Mind you, that the distance between my laptop and router is about 3 inches away. The further I go away from my router, the speed exponentialy drops (20 feet, and the speed even drops to below 10mbps). Even with different laptops that have completely different wireless cards. Now honestly, I have tried EVERYTHING to get the speed up. Both 2.4 and 5ghz, 20mhz only, 40 mhz only, different channels (currently the router is in channel 11, being the only router in that channel), setting the network to G-only. I tried changing the Beacon interval thing in numerous settings, I even tried changing the MUT. Firmware is completely up to date. I have also tried placing the router on a completely different place, to make sure there was absolutely no interference (tough that shouldn't be an issue if my laptop is only 3 inches away) I tried changing the security mode to something different than WPA2/AES.
Nothing worked, if anything, it made it worse in some cases. I have litteraly tried every option I could find online, except for trying a third party firmware like DDWRT, which worked excellently for my old WRT54G, though I read that speeds can't be improved on this E2000 with a third party firmware.
Is there anything else I can do, or should I assume that my router is defective?
When I'm in my bedroom, I get a very poor connection and my speed drops to about 0.25mbps. Abysmal, so I bought a WiFi range extender to get me a better signal. It works, and it allows me to get a speed of about 5-6 mbps, without dropped connections. Still slow, but at least it works. The weird thing is, wired through my router or modem, I get about 9mbps upload speed. With this extender, I get the same 9mbps upload speed in my bedroom, though only 5-6 mbps download speed. You'd think that the upload speed would drop simultaneously with the download speed. How can my upload speed be higher (maxing out) than my download speed? I wonder if my transmitting antenna of my router isn't defective.
Region : Romania
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version : Latest
ISP :
i just bought this router, all good until i had to upload wireless over ftp or samba. It is version 8.2
Firmware Version:
3.13.27 Build 120802 Rel.51024n
Hardware Version:
WR841N v8 00000000
I bought this router for the advertised 300 mbs, my last 150 router was giving me 6/7 mbs over wireless upload on ftp. Tp link router is giving me 800 k.
Download works on wi fi , i got 9,3 mbs from a 150 N adapter.
I tried all security options , even mac filtering . And i am trying to ftp over network , not the internet.
I have working internet behind cisco 2811 on all vlans however upload speed is very slow and ftp server download is slow and times out, previously when directly connected to modem/router was fine? This is router config below:
Current configuration : 2229 bytes
!
! Last configuration change at 02:21:18 UTC Tue Mar 12 2013
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
[code]....
I Have BT Infinity and they are pushing 70mbps to my house ....i bought an EA6500 and i had real bad internet speed but amazing conection speed with my BT Home HUB3 ... 23Mbps with Cisco EA6500 and 68Mbps with my BT Home Hub3. I found out it was the Media Prioritization so just to be safe i reset my factory settings and made sure it was turned off. Just like magic i get the same now as the BT Home HUB3 .
View 1 Replies View Relatedi have WRT610N v1.0 with latest original firmware but ftp upload speed and torrent download speed is terribly slow.
View 3 Replies View RelatedI have a Netgear N600 WNDR3700v1 Dual Band Gigabit router and am having a problem with the wired connection with my PC. Everything wireless in the house works fine. In fact, I also have a Direct TV box hooked up for on demand and a sling box hooked up (both wired) and they work find. It's just my PC that is having issues. If I bypass the router and hook straight into the modem, it runs fine also so I have something going on between the router and this PC. I updated the NIC driver and this did not work. Before the update in the device manager, it said it was a NIVIDA nForce Network Controller (if I remember right) and now it says NIVIDA nForce 10/100 Mpbs Ethernet. It was suggested that I change my speed and duplex to match the router after I update but I am unsure what to change it to.
View 11 Replies View RelatedMy laptops internet runs super slow, but only at our house.It runs at top speed on any other network. My wifes laptop has no issues at all. Have done multiple virus check with multiple different anti virisus programs.We use a Netgear modem I usually connect wireless, but have connected with an Ethernet cord with no change in speed.
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz, Intel64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 4063 Mb
Graphics Card: ATI Mobility Radeon HD 4650, 1024 Mb
Hard Drives: C: Total - 463711 MB, Free - 389512 MB; D: Total - 13026 MB, Free - 2178 MB;
Motherboard: Quanta, 3628, 18.42, CNF9401DLR
Antivirus: AVG Internet Security, Updated and Enabled
I've been experiencing some problems with my RangeMax wireless NETGEAR router (model WPN824) in terms of wireless connectivity. When directly plugged into my router (i.e. using ethernet cables), the download and upload speed (in mbps - megabytes per second) appear to be working correctly, where we register average download speeds of 15-19 mbps, and 1.99 to 2.07 mbps for upload speeds, as shown on speedtest.net. However, our wireless devices (i.e. laptops and Nintendo Wii) are not picking up the same download speeds, but the upload speed is fine. The problem is that the download speeds of the wireless devices are comparatively low, where speeds of 2.5 to 5.5 mbps are a commonality.
We've tried resetting the router (pushing that small button at the back of the router, using a pin) and have a new 10-character key password. We've also tried simply unlugging the power cable to the router, with disconnecting lengths of about 10 seconds to over a minute for separate attempts. It is also worth noting that the router occasionally disconnects and re-connects on irregular intervals, and we have many wireless devices attached to the router (though many of these are not in use and are very often disconnected from the internet, so I do not think the router is being overwhelmed).
I am currently paying for 30 mbps downloading speed and 2 mbps with respect to uploading, though the 30 mbps downloading speed will likely only be registered if directly connected to the black box (modem). As such, values of 10 to 18 mbps for downloading speed for a wireless device would be considered "normal". Why would our wireless devices not pick the correct mbps download speed? Is it possible that there is a setting on the NETGEAR SMARTWIZARD page (192.168.1.1) that is preventing this?
i set-up the D-LINK DNS 323 NAS unit with RAID 1 (dual 2-terabyte 5400 rpm drives)
it works, but it is slow in copying files between my computer and it (8 minutes to copy 7.94 gig file between NAS and my PC via wire).
i am using netgear WNDR3700 gigabit router. replaced the network wires to the latest spec, and my computer has realtek PCIe GBE network adapter.
this is looking more and more like the NAS RAID 1 is the bottleneck.. possibly 7200 RPM drives would have kicked more ass?
I have a Netgear 600 dual band router connected to a DOCIS 3.0 cable modem with a 25mps internet connection from my ISP, should be fast right? When I run a speed test on my comp I get 10-13 mbps download on average. Here's the issue, upon visiting my mothers house and running the same speed test I got very similar results. She is running a Lynksys G router on a DOCIS 2.0 cable modem with 12mps connection. My question is, how can this be so, am I at the limits of my comps g network card? as a disclaimer I would like to note I am connected to the G band on both routers.
View 1 Replies View RelatedFor the past week my internet has been extremely slow, I can watch a South Park episode online and it'll take me at least one hour before I can watch the entire thing because it keeps buffering every 20 seconds. I can barely browse MMO-Champion because it takes one minute to load. Every site takes forever to load. And it's just on my stationary computer. My laptop and mobile phone works just fine. It feels like I've tried everything:
* I've cleaned cache and cookies and stuff like that with CCleaner.
* I've used my console and done all that ipconfig stuff with /flushdns etc etc
* I've used my console and done all that netsh stuff as well
* I've tried to reset my router
* I've tried to use that Microsoft Fix-It program to do whatever it does.
* I've looked through my computer with my anti-virus and anti-malware
* I've installed the latest drivers for my network card/adapter
* I've fixed options on the computer that would allow my computer to perform better
* I've purchased another wireless adapter just to see if that was the problem
* And finally, yes, I've tried restarting the computer
I'm suffering with this annoying internet connection for a months. I'm using a router (tp-link) which I think the source of the problem ,yet I'm not sure. I'm a connected to the router via cable.My download speed is 10kps and below, we already contacted our ISP and change the cable yet the problem is still there.
View 5 Replies View RelatedI just had comcast internet installed, and am using a linksys wireless router (WRT160N). When I connect my netbook to the network it gets 0.7mbps on speedtest.net, when I use my girlfriends laptop it gets 16+mbps. I have tried everything, I am at my whits end. I have updated my firmware, updated windows to the the limit and reset the settings on my router. If I connect my netbook directly to the router I get 20+ but wireless is 0.7 and upload speed stays the same. I am using an HP Mini 210-2000 with windows 7 starter, I have updated it to service pack 1 and have all the windows based drivers installed. I have not tested it on another wireless network to see if it gets the same terrible connection. I don't know if its something with my computer, windows 7 starter, or the way my computer talks to the router
View 3 Replies View RelatedI am tethering 4g on my Gs3. i am using the wifi tether app rooted. i can connect to my pc and speedtest gives me 25mbps down and about 13 up. but when i connect to my xbox my connection is extremely slow and i only have 3 bars. dont understand whats wrong. and also when i download files it can never go above 1mb. and its not the files because i have downloaded many and its the same story. my brother has the same connection with a nexus and gets 3mb on his files. why my tether is so slow and anything i can do to fix it.
View 1 Replies View Related