Linksys Wireless Router :: E1000 / Arris TM502G Modem - Extremely Slow Network Speed
Aug 6, 2011
I am having a problem with my newly purchased Linksys E1000 router, I am having terribly slow network speeds while on that network.
Here are my network speeds with The e1000: (wireless) And here are the speeds with my old wrt54g: (Wireless) Here are the results directly hooked up to the modem: (wired)
I've tried setting the MTU to 1500, did a RMA with Linksys to see if it was a hardware problem, did a firmware update to the e1000, disabled DHCP and SPI, reseted my router and my modem....none of those things have worked
My ISP is comcast and I have a Arris TM502G modem
View 4 Replies
ADVERTISEMENT
Jun 14, 2011
Do I need to change myArris-TM502G router when changing to a Linksys E4200 Dual-Band modem
View 2 Replies
View Related
Mar 28, 2013
Having a bit of a quandry. I have one laptop, a Toshiba Satellite L500-2H, that seems to get ridiculously slow wireless speeds sometimes. Like, slow to the point of not even being able to load webpages. Or taking way too long to do so. Either it cripples along or can't load outright.sometimes the Toshiba will do exactly what it's supposed to and pull 20 megabits/s on speedtest.net, which is what the others do.
View 14 Replies
View Related
Apr 24, 2013
Region : Others
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : wr841nv8_en_3_13_27_up_boot(121101)
ISP :
I followed TP-Link's guide to set up a WDS connection between my two brand new WR841ND router. It theoreticaly "works", but the network is extremly slow. Copying a ~100 Mb sized file to another computer on the other side takes more than 10 minutes or more, I don't know exactly, because I shut down the process after 10 min. I pinged the "slave" router with 200 packets, and I realized that every third, fourth and fifth packet has more than 500 ms time. The minimum is 4 ms, the longest was 566 ms.
Router A (Master)
Connects to the internet/ADSL
DHCP enabled
[Code].....
I bought the two router from the same dealer, at the same time. Both have the same firmware. I checked all the chanels, and 5 is the only free one, but the situation is the same on every chanel.
What can couse this very slow transfer speed?
View 5 Replies
View Related
Mar 7, 2007
I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them.
View 9 Replies
View Related
Mar 9, 2013
I'm having a big trouble with my internet connection. The Upload speed is extremely slow after i got a new mainboard, that problem appears.[code] I'm tired with my suck internet connection! Upload a 1MB photo to Facebook took me hours..This problem has started for a week.
View 1 Replies
View Related
Jan 21, 2013
Slow browser speed on all browsers, but the downloading and uploading speed are normal according to speedtest.net. Ping is a bit high. Other computers in the house are fine.Already contacted ISP (Time Warner), modem is not the problem Contacted Linksys router support, router is fine. anti virus plus malware byte.
[code]...
View 4 Replies
View Related
Jan 24, 2013
i just replaced my malfunctioning E4200 with the new EA6500 and the speeds are almost like dail-up. I haven't changed ANYTHING in regards to the setup, so I don't see what I could possibly be doing wrong. I even went as far as hooking up the old E4200 to my laptop while having the EA6500 hooked up to my desktop so that I could cross-reference the router settings. They were exactly the same.
View 9 Replies
View Related
Apr 6, 2011
E4200 2.4 channel extremely slow.
View 7 Replies
View Related
Oct 22, 2011
I got a new Netgear N600 Router and installed. Everything works fine, except my PC, which is using a Belkin F5D8055 V2 USB adapter. My upload speeds are less than 1Mbps, while on my net book, ipad, and iphone they are 5Mbps+. I can not firgue out how to fix this. I am running Windows 7 Home Premium, SP1. My PC has an I7-920, 18GB RAM, and 2x Radeon 5870.
View 1 Replies
View Related
Feb 29, 2012
I just purchased an E-3000 and when I log into the user interface it seems changing pages and saving settings takes forever. I click on a section in the router menu and it takes what seems like 30 seconds for the page to change or accept the new settings. It's not my browser it's definitely a Linksys Router issue. I updated to the latest firmware and latest Cisco Connect software as well. Is this slow user interface a normal thing with these routers?
View 1 Replies
View Related
Jun 5, 2011
All I want is functional Wi-Fi in my house like the rest of the world. Unfortunately, I cannot have that for whatever reason.
Now that I said that, Let's me get down to explaining my issue. I orginally owned a Linksys WRT350n. This router worked fine for years, untill one day I decided to do a speed test on my new Motrola Atrix. My Wired computer gets ~22000kbps down and 4000kbps up... My wireless speedtest on my Atrix yielded 2000kbps down and 4000kbps up. I assumed it was the phone, so i went and tried every other wireless device in my house. Everyone of them got the same result.. 2000kbps down.. 4000kbps up.
At this point I went into my router settings and tried every available channel, all of them yielded the same result of 2000kbps down and 4000kbps up.. At this point, I assumed it was the router. Ive had it for a few years and figured it was just reaching EOL. I rushed to my nearest bestbuy to pick up a brand new Linksys E4200. I brought it home, hooked it up and was eager to test my new wireless speeds. Unfortunately the same results of 2000kbps down and 4000kbps up was the yield. Once again, I've tried every possible channel with no change to my speeds. At this point I called up Linksys/Cisco support.. They were POSITIVE it was a hardware issue and had me exchange the router, even though I informed them i had the same issue with my older router of a different model. I went along with it anyway, and exchanged my router. Same issue. I called Cisco/Linksys back up and informed them, and basically they told me "they'd make a note of the issue and call me back at a later date."
I downloaded a WiFi Analyzer on my cell phone. Theres only two other dectable networks in my area, and they are low low low signal. So, I don't believe it's heavy saturation. The router is in the same room as 3 of the wireless devices that get 2000kbps down/4000kbps up. So it's not range either.
View 3 Replies
View Related
Mar 22, 2011
So I've had this problem before and normally I solve it by simply unplugging everything from my modem and router but ive tried that this time several times to no avail. The internet suddenly cut out one day and when I did my usual unplugging thing it came back unbearably slow.Right now I'm running off a motorola SB5100 Surboard modem and a linksys WRT54G2 router and its not my computer, everyone in the house is getting terrible speed.
View 10 Replies
View Related
Feb 1, 2013
I've set up PPPoE on my EA4500 router with a Vigor 120 modem in bridged mode and it says an internet connection is established, but the connection is extremely slow on all my devices. When I run the speed test within the EA4500 firmware it appears fine, but I cannot load any web pages on my laptop or other decives because the connection is so slow. The connection is slow with both wired and wireless connections. I've tried changing the MTU settings with no success. I've also tried using a different router and connecting the modem directly to my laptop and using PPPoE within the laptop and these both work fine, so I think it's clear there is a problem with the EA4500 router itself.
I'm just using the Vigor 120 to authenticate and connect to the internet itself, with the router in DHCP automatic configuration mode. I think this is causing a double NAT.
View 9 Replies
View Related
Feb 18, 2013
i have an ARRIS TM822 cable modem provided by comcast, in addition i have a linksys e3000 wireless router. what i am trying to accomplish is to bridge the cable modem over to the router. i messaged comcast about this issue and i have attempted what they told me to do, but im not getting any where.
View 1 Replies
View Related
Feb 25, 2013
For the last 4 years I’ve been using the Linksys Router, model WRT150N V. 1.1 and never had any problems—until now.Yesterday I noticed that my wireless devices (i.e., two computers, tablet and Internet radio) either don’t work at all (the Internet radio) or the pages load extremely slowly—for example, the tablet has become, for all intents and purposes, unusable. Since my ‘main’ computer is connected directly to my cable internet, I know that there is nothing wrong with the Internet connection itself, only with wireless connection.I disconnected the Linksys Router for 2 minutes and reconnected it, but to no avail. I know that I have not made any changes to any software/hardware that might affect the speed.Since I also happen to have access to another wireless Internet connection (a different provider), I connected to that network and all my wireless devices were working perfectly. Therefore, I think the problem must be with the router. I am using Windows XP (on the main computer, where the router and Internet cable are attached).
View 5 Replies
View Related
Dec 25, 2012
I currently have a Linksys E1200 router and I am getting anywhere from .3-.5 of a megabit per second download speed while upload speed ranges from 2-5 Mbps. This is very strange to me as I have never seen a connection this slow or one that had a higher upload speed than download speed.
View 7 Replies
View Related
Aug 8, 2011
I get about only 500 KB/s for accessing files (as a network drive), regardless of the size of the file (even full 4GB iso)If I watch a video via media server however I get around 3MB/s.My firmware is currently on 1.00 and I am not upgrading due to the notorious media server problem.
View 5 Replies
View Related
Mar 24, 2012
I have recently purchased a Cisco E4200 to replace my D-LINK DIR-655, which I thought was defective because I was getting slow wirless file transfer speed, regardless of setting, location and client.Using the E4200, when I transfer a file from a PC to another, both connected at 300mb on the 2.4ghz band, the file transfer rate reported by windows 7 and networx is from 2MB/s to 3.5MB/s. I think those transfer rates are not acceptable. Is that a good assumption ? I would expect something in the range of 10MB/s (which is what I get with a cheap dlink router, wired)
I also had great difficulty finding a channel. I had to try them all one-by-one as the auto channel selection made my PCs connect at 130mb.The E4200 is setup as follows:
-WPA-Personal
-Channel 5
-802.11n only
I have tried 3 different computers with different network adapters and they all underperform (IMO..).There are no other wireless networks in my area.I also took the E4200 to my office which is very crowed. Every single channel is occupied by several wireless networks. I get a file transfer speed PC to PC of about 2MB.I basically could have kept my DIR-655 as the speeds are identical.
View 4 Replies
View Related
Nov 6, 2011
I have a Arris DLS with 12 Mbps Download and when I Connect my laptop directly I get the same speed as 12 Mbps but when I do the speed test with my linksys I get only 5 Mbps. How to upgrade to the new WRT54GL or WRT54GS?
View 1 Replies
View Related
Aug 13, 2011
I have a Cisco E1000 v2. I updated to the latest Firmware 05/25/2011Ver.2.1.02 (Build 5).
Before doing this update I did get 300mbps N speeds. Now I don’t using the same settings, it max out at 144mbps speed. Also the router only seems to get B speeds when using a channel other than 11. I did do a hard reset after the firmware update.
View 1 Replies
View Related
Aug 11, 2011
I purchased a new router - cisco e1000. Currently, i have 2 laptops wirelessly connected to this router. When i do a broadband speed test, the speed drops down significantly to 8MBPS while if i connect it to the cable modem directly (wired) i.e., without router, i'm getting 15 MBPS download speed. I did a couple of times this speed check and the results are same. I tried changing the advanced settings in the router (which was specified in one of the post in this forum) but no luck. Is it that i need to buy e4200 to match the wired speed of 15 MBPS or what other things I can do to get the same speed of my cable modem (provided by my ISP)?
View 1 Replies
View Related
Oct 18, 2011
I'm having an issue with my laptop. Although, from my provider, it should be possible to establish a connection at 25'000 kbit/s (download), max speed is at about 800 kbit/s. I'm only about 20 feet away from where the router is located and I don't use any phones (except for a cell phone). I read on this board, that I might have to change the wireless settings on the router and change the radio band but didn't manage to do so. I'm using Mac osx and a wireless connection.
View 4 Replies
View Related
Oct 9, 2012
I just "upgraded" from an E1000 to an E1200 wireless router. I had good performance with the E1000, and I only upgraded to the E1200 because it was on sale.My only complaint with the E1200 is the slower download speed on my desktop PC that is connected directly to the router. My normal download speed on the desktop PC was 25 Mbps with the E1000 model. After I disabled the WMM on the E1200 as others suggested, the download speed on the desktop machine immediately increased from 5 Mbps up to 15 Mbps. Any other suggestions to get the download speed up to 25 Mbps before I switch back to my E1000? The E1200 router is connected to my Arris TM602G modem. Both modem and router were reset during the installation process. I setup parental controls for a couple of iPods and configured Open DNS, but other than that, the router is using default settings. All wireless devices in the house seem to be performing fine with the E1200.
View 8 Replies
View Related
Mar 12, 2011
Just relised this problem after trying to leech some stuff from a friend from his pc at a lan My connection seems to go REALLLY slow. Heres a pic nobody else is file copying and its the same from every pc.
View 7 Replies
View Related
May 23, 2009
I use my personal laptop at work (an Inspiron E1505). To do so, I had to put it on the network at work. However, when I am home, my laptop runs extremely slow, sometimes taking several minutes just to open a simple program like the calculator. Web surfing is useless even with Road Runner. Any way to make this faster?
I go about removing the computer from the network and would that fix the issue or would I need to wipe the whole thing and start over?
View 9 Replies
View Related
Jan 18, 2012
I have DOCSIS 3.0 modem and a Linksys E1000 wireless router with which I get reults from SpeedTest of 8.6 mps down, 1.57 mps up up from 15 mps service from cable provider. Connected to modem via ethernet cable produces 16.0 speeds. Do I need to upgrade the router or are my settings wrong?
View 1 Replies
View Related
Aug 23, 2012
I have been having problems with my Internet the past couple weeks. If I am watching a video, it doesn't matter which site, the video will stop and start from the beginning or the video will just stop altogether and I have to refresh the page. Another problem that happens while browsing, it will take about a minute for a page to load. The computer I am using is wired right into the router.
The rest of the family's computers the apple tv and the roku are wireless. I have been hearing complaints from them and have witnessed the laggyness. While streaming videos on the roku or apple tv, the video will stop and say video is not available or no connection. This is what I get from ipconfig/all
Microsoft Windows [Version 6.2.8400]
(c) 2012 Microsoft Corporation. All rights reserved.
C:WINDOWSsystem32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Matt-PC[code]......
View 3 Replies
View Related
Mar 25, 2011
I have a Netgear 600 dual band router connected to a DOCIS 3.0 cable modem with a 25mps internet connection from my ISP, should be fast right? When I run a speed test on my comp I get 10-13 mbps download on average. Here's the issue, upon visiting my mothers house and running the same speed test I got very similar results. She is running a Lynksys G router on a DOCIS 2.0 cable modem with 12mps connection. My question is, how can this be so, am I at the limits of my comps g network card? as a disclaimer I would like to note I am connected to the G band on both routers.
View 1 Replies
View Related
Feb 25, 2011
I have FiOS and their supplied wireless router Actiontec #MI424WR. I have home theater equipment that uses the newer N signal so I purchased a Linksys E3000 Wireless-N Router. I have one of the LAN outputs on the Actiontec feeding the Linksys input and Wi-Fi turned off on the Actiontec. This is working good for my wireless home theater equipment but I am having problems with my wired speed. It has gone from averaging anywhere from 20 to 30 mbps on numerous test sites when plugged into the Actiontec to averaging around 10 mbps when plugged into the Linksys.
1) Is my wireless N speed going to top out at 10mbps or less since that is all the router is showing on wired? Shouldn�t N be broadcasting a faster speed if given the ability?
2) I have my computer currently plugged directly into the Linksys verses the Actiontec. This makes it easier to program the Linksys router. Since I am no longer using the wireless part of the Actiontec there really is no need to be plugged into it. Is there anything I can do get the speed higher on the Linksys, a setting I can change? Will I have to plug the computer back into the Actiontec to get the higher speed and then move it every time I may need to make a change to the Linksys?
View 2 Replies
View Related
Apr 10, 2013
I bought the new E2500 Router about 5 months ago and it was great until one day the wilreless part would not give me any speed at all. I ran a wired test of the router and I would get full 30Mbps speed that I'm supposed to get. So after firmware updates and everything else I took it back and got another one.It has worked great for a month and today it's now doing the same wilress slow down issue. I can run a lan connected test and get full speed. But wireless is bouncing around at 5Mbps~13Mbps. No where near the 30Mbps I'm supposed to be getting. What is causing the wireless to bomb like this?
View 1 Replies
View Related
Dec 6, 2011
I have a problem with new E4200 WAN speed. I have 1Gb connection from my ISP, and my old Netgear router gives me about 350 Mbps WAN speed, but with new E4200 I only got 110 Mbps max download speed.Cisco live support tried suggested to change MTU from Auto to 1400 (and try different wlan channels, even that I don't use wlan). This MTU size change makes no difference with WAN speed. I have latest firmaware installed, router reseted several times, tried different cables etc. Also with same cable sets my old Netgear still gives about 3 times better WAN speed.WAN port (and all LAN ports) seems to negotiated at 1000 Mbps at both ONT (optical network terminal) and Linksys settings page, but unfortanately there is no way to change the setting from auto to manual at E4200 settings (and it is not possible to change any settings of ONT by user). I was thinking that if somehow it won't auto negotiate properly (even if the setting page says its ok) but maybe it actually negotiated 100 Mbps port to WAN.
View 9 Replies
View Related
Oct 21, 2011
I just purchased an e1200 wireless router. Wireless speeds seem to be very slow. I'm trying to transfer 1 file to my media server, and am only getting 221kb/s. Also, internet connection seems to be slow as well (though if I plug directly into the router or the modem, I get speeds of 25Mbps, however when connecting wirelessly via the router I get speeds closer to 2Mbps (according to speedtest.com).I've played around with the settings as per other posts, and seemed to get the best speeds with the following config (however it is still very poor):
- security mode: WPA2 Personal
- network mode: B/G (have also tried N, which gave worse speeds)
- channels 1,3,6,9, and 11
View 2 Replies
View Related
