Change Arris-TM502G Modem When Installing A Dual-Band Router?

Jun 14, 2011

Do I need to change myArris-TM502G router when changing to a Linksys E4200 Dual-Band modem

View 2 Replies


ADVERTISEMENT

Linksys Wireless Router :: E1000 / Arris TM502G Modem - Extremely Slow Network Speed

Aug 6, 2011

I am having a problem with my newly purchased Linksys E1000 router, I am having terribly slow network speeds while on that network.
 
Here are my network speeds with The e1000: (wireless) And here are the speeds with my old wrt54g: (Wireless) Here are the results directly hooked up to the modem: (wired)
 
I've tried setting the MTU to 1500, did a RMA with Linksys to see if it was a hardware problem, did a firmware update to the e1000, disabled DHCP and SPI, reseted my router and my modem....none of those things have worked
 
My ISP is comcast and I have a Arris TM502G modem

View 4 Replies View Related

NetGear DGND3300 Wireless Router Modem 3300 Dual Band?

May 8, 2011

I got a NetGear DGND3300 Wireless Router Modem 3300 Dual Band from eBay only to find it will only work in USA.

View 7 Replies View Related

TP-Link Dual-Band Wireless :: Port Forward Through TD-8817 Modem > TL-WDR-3600 Router > PC?

Mar 13, 2013

Region : Ireland
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Smart

I have

A TP-Link TD-8817 Modem with IP Address 192.168.1.1
A TP-Link TL-WDR-3600 Router with IP Address 192.168.0.1
A PC with IP Address 192.168.0.100

I figured out that I can only enter an IP Address with the range 192.168.1.* when port forwarding on the modem, ie I cant enter 192.168.0.100 for the PC.Is there any way of Port Forwarding to the PC?

View 2 Replies View Related

Netgear 600 Dual Band Router Connected To A DOCIS 3.0 Cable Modem - Downloading Speed Is Slow?

Mar 25, 2011

I have a Netgear 600 dual band router connected to a DOCIS 3.0 cable modem with a 25mps internet connection from my ISP, should be fast right? When I run a speed test on my comp I get 10-13 mbps download on average. Here's the issue, upon visiting my mothers house and running the same speed test I got very similar results. She is running a Lynksys G router on a DOCIS 2.0 cable modem with 12mps connection. My question is, how can this be so, am I at the limits of my comps g network card? as a disclaimer I would like to note I am connected to the G band on both routers.

View 1 Replies View Related

Belkin Routers :: Change NAT Type From Moderate To Open For Xbox 360 N450 Dual Band?

Dec 31, 2012

How to change my NAT type from moderate to open for xbox 360. Belkin n450 dual band

View 1 Replies View Related

TP-Link Dual-Band Wireless :: Cable Modem And WDR4300 Don't Seem To Like Each Other

Feb 14, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : charter, its smarter.

so i have a sb6141 cable modem that is mine and not a lease. it works like a champ when hard wired to my desktop. i just got my hands on a new shiny tp-link wdr4300 yesterday and after messing with it for the better part of 2 hours, something seems to be amiss with the communication between the two. everything will be humming along fine and all of a sudden i get the dreaded PAGE CANNOT BE DISPLAYED. sure as the world i look at the modem and all the lights are off and its resetting itself. and honestly this continues until i pull the power and plug it back up. i think maybe one time in the middle of the night i actually saw it reset itself and then come back online.

View 1 Replies View Related

Linksys Wireless Router :: No Connection To 5GHz Band On E3000 Dual Band?

Apr 14, 2010

I have the new XBOX 360 black N wireless adapter and the Linksys E3000 dual band router as I want to upgrade the network range and speed to N. I set up a unique SSID and passphrase (WPA2) for both 2.4GHz and 5GHz bands. My XBOX could connect to the 2.4GHz band network and could connect to XBOX Live. But when I configured all the settings and tried to connect to the 5GHz band network, but no luck. My XBOX just said it failed to connect. I was sure that I did type in the SSID and passphrase correctly. I still cannot figure out what went wrong. I even suspected either the wireless adapter or the router malfunctioned.

View 9 Replies View Related

D-link Dir-655 :: Arris Docsys3 Modem From Comcast Which Has A Built In Wifi Router

Aug 17, 2012

I have an ARRIS Docsys3 modem from Comcast which has a built in WiFi router. I also have a DIR-655. The Modem is in my office and I have a 100' Ethernet cable running through my attic to my front room where the dir-655 is located.

I use the DIR for WiFi as well I have it connected to my TV and Xbox.I use the ARRIS Modem for WiFi as well I have it connected to another Xbox and a Desktop computer.I want to have everything on 1 network, Dir-655 uses IP address 192.168.0.1-100 and the ARRIS uses ranges 10.0.0.1-100. I want to be able to connect to the dir-655 and have the IP for that connection join up with the 10.0.0... network so that I will be able to transfer files freely throughout the network.

I want everything on one network. Right now when I connect a laptop to the DIR-655, I can not access the printer that is connected to the Desktop on the ARRIS modem. I have to connect to the ARRIS modems WiFi to then use the printer on the desktop.Likewise, I want to use the media extender on the Xbox connected to the DIR-655 with the Desktop connected the the ARRIS modem, but I can not because of the to different networks.

View 5 Replies View Related

Linksys Wireless Router :: Arris Cable Modem Not Working With WRT54G

Mar 7, 2007

I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them.

View 9 Replies View Related

Home Network :: ARRIS TM822 - Bridging Cable Broadband Modem To Router

Feb 18, 2013

i have an ARRIS TM822 cable modem provided by comcast, in addition i have a linksys e3000 wireless router. what i am trying to accomplish is to bridge the cable modem over to the router. i messaged comcast about this issue and i have attempted what they told me to do, but im not getting any where.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: DHCP Not Working For 6 GHz Band?

Apr 2, 2013

Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Centurylink

I'm using a WDR3600 router, and I'm having difficulty with getting internet access on the 5 GHz band. Right now the router is broadcasting in both 2.4 and 5 GHz as two separate APs. The 2.4 GHz band works perfectly fine, but when I connect to the 5 GHz band my device is not assigned an IP address and cannot connect to the internet (or even the router configuration page). Unfortunately, I don't have another device capable of accessing the 5 GHz band, so I can't check to see if the computer is at fault, but both the computer and the router have worked together with no problems before, and this computer has done fine in accessing other 5 GHz bands.

View 1 Replies View Related

Arris Tg862g / Ct Change Wifi Mode

Feb 25, 2013

I recently received my Arris modem from comcast and during the installation phase I kept looking for an option to change the wifi mode from b/g/n to n only as all my network adapters connecting via wireless are n types and I want the max speed available from the modem. At no time did the option come up to define. So I finished the set-up and eveyone is connected, albeit at 54 Mpbs.I have accessed the modem via 10.0.0.1 after set-up in search of another option where I can revise the wifi mode. No luck. Comcast gave me the backhand lob over to Arris and Arris followed through with an overhead smash at the net.

View 4 Replies View Related

Using A Dual - Band Router As An Access Point?

Mar 29, 2011

I'm networking a clients home and he specifically wants dual-band wifi through-out. Now he has a fairly large 3 story house, and wanted to place an access point on the top floor to be assured he'll have strong and reliable signal. He's going to have multiple TV's wired into the network, as well as computers, laptops, phones, a Xbox 360 and a PS3. Were using Gigabit switches and a D-link Simultaneous Dual-band Gigabit router.The modem, router, and main 16 port switch will be in his basement in a semi-server room. He currently has 12 lines run throughout his house, 3 to the top floor, 5 to the main floor, and the ability to lay some in the basement if he needs. The 16port switch will plug into the router, I'm also putting an 8 port into the router from the main and top floor. The remaining lines will plug into the switch in the basement. On the top floor I was going to install an AP or Router turned into an AP into the 8port switch.Now the only reason I am considering using a router instead of just getting an AP, is that neither of us can find a simultaneous Dual-band AP. It seems the only simultaneous DB out there is in routers. So, my question is, will I be able to easily use a router as an AP AND get simultaneous Dual-band out of it if I do so? Is there a Simultaneous Dual-band AP on the market that would a better investment?

View 1 Replies View Related

Boosting Netgear Dual Band Router?

Dec 21, 2012

I use a Netgear Dual band router and it works great. I was messing with a PC i bult and screwed something up(of course) I couldn't get a strong signal on either band. I have a Belkin wireless N router that I dont use, can I use it to boost my signal?

View 1 Replies View Related

Need To Clone ISP Furnished DSL Arris Modem

Apr 5, 2012

I have an arris modem from the ISP company and it works good, bat it is NO wireless model. So I have purchased arris WITH the wireless capability myself and ISP refused to support it so my guess that I need somehow to clone their old modem to my new one.

View 4 Replies View Related

Arris TG862 - Can't Connect To Modem

Jan 4, 2013

Today I got a new modem brought from Insight my ISP.

Modem: Arris TG862
Router: Cisco Linksys E1200

What happened is I connected to the modem's configuration page and turned off dhcp for all of the options because I wanted my router to do this, but after doing this and saving my settings, I can no longer connect to the internet or the modem no matter what I try. I really don't want to call insight when they just brought the modem.

View 19 Replies View Related

Install New D-Link N750 Dual Band Router?

Jul 6, 2012

I just bought a new D-Link N750 DIR-835 Dual Band Router, and I tried installing it to apparently no avail. I used the installation CD and followed all the instructions carefully throughout, but once it was "working," I did a speed test and saw that there was absolutely no difference in speed.

I refuse to believe that this new router, which cost me over $100, would provide no noticeable difference over my old router. Speaking of my old router, I have the original router that Telus sent me for free. It's a Siemens Gigaset SE567, and I've dealt with it a few times when I had internet problems,fiddling with the 192.168.0.1 web address site, configuring the passwords and SSID, and the like. I'm not super-educated on the matter,but I know enough about it that with a thorough explanation, I could probably perform whatever is necessary.

Anyways, like I said, I followed all the instructions and after testing out some simple Youtube videos on both my tablet and laptop, through the wireless network that resulted, it couldn't even load a 480p video without lagging. I know that the router isn't the only thing that ensures speed, but even with my (probably barebottom) internet plan (which my father set up, not me, and knowing my father, it's probably the slowest connection available), I just cannot believe that the resulting network was the best speed available to me. So did I do something wrong? Are the routers interfering with each other? Is that actually the best speed I can achieve? Is that Gigaset even a router? Or is it a modem? Or both?

View 18 Replies View Related

Belkin Dual Band Router - To Boost Up Wifi

Jan 28, 2012

I recently purchased a Belkin Dual Band Router and connected to the internet at our side-house we have connected to the house. I'm getting a poor to fair signal out here. Just to mention, there is a lot of traffic passing at all times of the day and night. Busy highway. Is there a way I can boost my wifi signal without buying an actual wifi booster?

View 5 Replies View Related

Dual-band Router With Open Firmware Support?

Jul 7, 2011

I'm about to jump on the bandwagon and drop my whr-g125 running tomato for a new wireless-n router that runs tomatousb. I can't seem to find a dual-band one that is supported.

Need:

- Wireless-n dual-band (2.4ghz+5ghz). Doesn't have to be the super fast type.. whatever is entry for this.

- At least 1 usb port for printer sharing

- Prefer gigabit, but I can live without

- Must be able to run Tomato in some form, or if I have to, run dd-wrt as a last resort.

View 2 Replies View Related

Using Old Linksys Wireless N Dual Band Router E2500 As AP?

Jul 31, 2011

I just bought a linksys wireless n dual band router e2500 and i want to make my old wrt54g router as an access point. how do i do this and where to start?

View 11 Replies View Related

Linksys Wireless Router :: EA 3500 Dual Band But Only 1 Available

May 17, 2012

I had the store set up my EA3500 which is a dual band...home 1 and home 2. I can only see home 2 which is the smaller band width.

View 1 Replies View Related

Connecting Arris Modem Directly To Laptop?

Feb 15, 2011

I've been trying to connect my laptop directly to my Arris modem with an ethernet cable to get on the internet, but for some reason every time I do I have "limited access" and can't get on the internet. I can only seem to get my laptop on the internet while the wireless router is connected to the modem and then either connecting wirelessly or by connecting my laptop to the wireless router with an ethernet cable.I want to connect to the internet without my wireless router, because someone was hacking our router and was apparently doing illegal downloads. We got a cease and desist letter that said our internet will be terminated if it happens again, so I want to connect to the internet without any wireless connections being set up.

View 3 Replies View Related

Wireless Arris Modem Won't Connect Via Ethernet

Nov 22, 2012

I got a new modem from the cable company Arris TG862G. This is a wireless modem and I had them set everything up on their end which is now after 2 hours with them on the phone working fine. The problem I'm having is somewhere in my computer is my guess and their guys didn't know which way was up so i gave up on them fixing my issue. So here I am. I have a custom built computer that is using a Gigabyte mobo and has been working fine with the on board Ethernet card before now. I used to have the desktop plugged into an Arris modem via a Belkin router and this set up worked fine. I also took the current modem and plugged it into the Belkin N600 router and then to my computer and to my complete bewilderment it worked fine. I wanted to get rid of the router so I could see if I could get faster download speeds (That initial issue being on speed tests I get 50mb/s and on actual downloads I would only get 5mb/s).

I got it to work (I have no idea how) for about 20 minuets. When I restarted the computer it stopped working. I am now back to square one which is the desktop not even recognizing that there is a cord plugged in. I know the cord is fine and the ports are fine as well that isn't the issue. My laptop connected just fine to the Ethernet cord with no issue. I have uninstalled the Belkin software to see if that was the issue and no change. Everything wireless works just fine, it is just this Ethernet connection that is FUBARed, and again ONLY with the desktop.I am running Windows 7 ultimate. I am about to QQ and just deal with the 5mb/s downlods because that's not terrible but I got greedy.I was messing with the Ethernet wire some and it started picking up the router but never tried to connect to the internet, I'm going to try other wires but I don't think that's the issue.

OK so another update ladies and gents: my desktop has been on for about 40 minuets now and it is connected to the modem. I have done nothing to it that would cause this and it just randomly happened. Short of never turning my computer off again which would be hell on my power bill what can I do to fix this problem? On speedtest.net I'm only getting 30.48 Mb/s and as I said earlier I should be getting around 50mb/s (which is what I get on on the wireless laptop). I just restarted it and it wouldn't connect to the modem again.

View 6 Replies View Related

TP-Link Dual-Band Wireless :: Use WDR4300 As Switch Rather Than Router?

Dec 6, 2012

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : Not Clear
Firmware Version :
ISP : Verizon DSL

My DSL connection comes into our house in the basement and the DSL modem came with a router included. I bought the WDR4300 for the higher speed wireless connections and the gigabit ports. I really don't need the "router" functionality. I would like to put the WDR4300 on the second floor to give (hopefully) the broadest wireless range. However, I would like all my PCs (including those wirelessly connected) to be on the same sub-net. Is there a way to configure the WDR4300 so it acts like a switch rather than a router?

View 1 Replies View Related

TP-Link Dual-Band Wireless :: What IP For LAN When TL-WDR4300 Is Secondary Router

Feb 25, 2013

Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : fullrate.dk

My ISP has provided me a router: Zyxel P-2601HN which has an ideal WLAN transfer rate of 150 mbps. I live in a concrete 2 story house so signals are weak at best on the other floor - therefore, I Have bought the TL-WDR4300 as an extension for the latter floor. I have connected the routers from LAN to LAN and the Zyxel has 192.168.1.1 on LAN and the TL-WDR4300 had 192.168.0.1 as out set. I have changed this to 192.168.1.2 and all the setup (disabled DHCP + other) seems to work alright. BUT i can not log into the TL-WDR4300 !! Not with http://192.168.1.2 and not with [URL]. What I can do to get into the setup of TL-WDR4300. I know I can alays backup the setting and reset the router and load the setting again, make alterations, saving .....but it kind of drastic !Can the two radios SSID names (2,4 MHz and 5 MHz) be the same name as the SSID name on the Zyxel P-2601HN ? What are the implications ?

View 3 Replies View Related

Arris TM602B Modem Losing Connection For Few Seconds?

Sep 25, 2012

First of all, this is how my connection looks like:

PC & Xbox 360 -> Router (Linksys WRT54GL with DD-WRT firmware) -> Modem (Arris TM602B) Everything is working just fine, except for every now and then (sometimes a few times per day), when my modem decides to "stop working" for a second or two. I do not know if it is exactly the modem, but i guess that it is.

What happens, is that for a second or two, all the lights on modem stop blinking or turns off, except "Power", "DS" and "US". Those lights stays turned on. After a second or two, all the lights continues working normally.

It would not even be that big of an issue, as i would not mind if my internet radio has stopped working for a second or if i had to wait a second before continuing with browsing the web, but it becomes an annoying issue, while i am playing video games on Xbox Live. This is what causes me to disconnect from an online game, even though, everything works normally after - until it happens again.

View 1 Replies View Related

Connecting Laptop Online With New Arris TG862 Modem?

Aug 20, 2012

I just switched ISPs and received a new modem, unfortunately I can't seem to connect my laptop online with this. Everything else connects fine, but something is up with my computer, it connects fine wirelessly to the modem, it just doesn't have a proper internet connection.I'm running windows 7, the modem is an Arris TG862.

View 2 Replies View Related

Lan Internet Through Arris Touchstone TM602G Telephony Modem?

May 6, 2012

Connecting to the internet through my Arris Touchstone TM602G Telephony Modem phase 2 to my custom desktop.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Dual Band Router Compatible With DHCP And VPN

Mar 18, 2012

Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN?

View 1 Replies View Related

Netgear N600 Dual Band Gigabit Router - Channel Changed But It Still Seems To Lag?

Oct 20, 2011

I have a Netgear N600 Dual Band Gigabit Router and my roomate and I both have the wireless xbox and when we connect to xbox live and find a game on call of duty mw2 we lagg our butt off nd we tried changing the channel on the router but it still seems to lag.

View 11 Replies View Related

Unable To Print To Network Printer After Upgrading Router To Dual-band?

Mar 2, 2012

I recently upgraded my d-link router DI-524 for Netgear N600 WNDR3700v3 and every component (wired or wireless) is working except network printer. I have it wired directly to the router and all pcs on the home network can see it, however when i select to do a test print, nothing prints to the printer and i get error. I had this setup using the d-link router with both the printer and the XP PC wired directly to the router and using the XP PC as a network pc sharing the printer to other pcs (Vista / Windows 7) on the home network.The printer is a Toshiba e-studio 160 series.. I re-added the print drivers for XP and still not able to print. Is there anything else I can try?

View 9 Replies View Related

Can't Setup Netgear N600 Wireless Dual Band Gigabit Router

Dec 1, 2012

I confused ,with which modem to purchase to set up my n600 wireless dual band gigabit router wndr3700, i'm on boardband with no modem

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved