Can't Setup Netgear N600 Wireless Dual Band Gigabit Router
Dec 1, 2012I confused ,with which modem to purchase to set up my n600 wireless dual band gigabit router wndr3700, i'm on boardband with no modem
View 1 Replies
ADVERTISEMENT
Netgear N600 Dual Band Gigabit Router - Channel Changed But It Still Seems To Lag?
Oct 20, 2011I have a Netgear N600 Dual Band Gigabit Router and my roomate and I both have the wireless xbox and when we connect to xbox live and find a game on call of duty mw2 we lagg our butt off nd we tried changing the channel on the router but it still seems to lag.
View 11 Replies View RelatedSlow Wired Connection On Netgear N600 WNDR3700v1 Dual Band Gigabit Router?
Aug 6, 2012I have a Netgear N600 WNDR3700v1 Dual Band Gigabit router and am having a problem with the wired connection with my PC. Everything wireless in the house works fine. In fact, I also have a Direct TV box hooked up for on demand and a sling box hooked up (both wired) and they work find. It's just my PC that is having issues. If I bypass the router and hook straight into the modem, it runs fine also so I have something going on between the router and this PC. I updated the NIC driver and this did not work. Before the update in the device manager, it said it was a NIVIDA nForce Network Controller (if I remember right) and now it says NIVIDA nForce 10/100 Mpbs Ethernet. It was suggested that I change my speed and duplex to match the router after I update but I am unsure what to change it to.
View 11 Replies View RelatedBelkin Routers :: How To Bridge N600 DB Wireless Dual-Band Router F9K1102
Dec 31, 2012Is there a way to Bridge N600 DB Wireless Dual-Band N+ Router F9K1102?
View 1 Replies View RelatedWireless Router N600 Wireless Dual Band Router WNDR3400 - Unable To Connect With Internet?
Feb 7, 2011The internet at my parents house has recently gone on the fritz..the wireless router is a N600 Wireless Dual Band Router WNDR3400..The computers of the house are able to connect to it..But it does not allow internet connections..The 3 computers are an HP Laptop running windows 7.a Dell Dimension E521 Running windows 7 & and an older HP Walmart special running XP.They can connect to outside systems and through a wired connection to the Modem from Cable vision. They replaced the wireless router and the problem continues.Internet is capable by plugging directly into the Cable vision router,unfortunately do not have the cables to try through the Netgear router to test that out..
View 3 Replies View RelatedBelkin Routers :: N600 DB Wireless Dual-Band USB Adapter / Windows 8
Nov 18, 2012I got the N600 DB Wireless Dual-Band USB Adapter in October 2012. How do I install it on Windows 8?
View 1 Replies View RelatedBelkin Routers :: Firmware Compatibility With N600 Hd Wireless Dual Band
Apr 1, 2013I have belkin n600 hd wireless dual band n router f7d8301 v1. do i need to do any firmware upgrade? should i down load and install V3 of firmware of V1 only? i want to increase / enhance the range of WiFi.
View 1 Replies View RelatedCabling / Cards :: WNDR 3400 N600 Dual Band Router - Experiencing Lag Spikes In Xbox
Mar 24, 2011My problem is with xbox live, i have the WNDR 3400 N600 Dual Band Router and i have been experiencing lag spikes since the day i have gotten it. I used to have a wireless adapter and i thought that was the problem so i recently went out and bought a 200 ft ethernet cable so now im hardlined to the router I have the xbox set to highest priority, i have it set with a static ip address for the dmz so i have no restrictions, i have all ports opened just in case, i have great internet speeds : 18.04 mbps download and 4.03 mbps upload and nothing seems to work.. i still have lag that sometimes disconnects me from xbox live and ruins the whole gaming experience.
View 3 Replies View RelatedBelkin Routers :: F9L1101 N600 DB Wireless Dual-Band USB Adapter / No Internet
Nov 13, 2012F9L1101 N600 DB Wireless Dual-Band USB Adapter : recognizing and connecting to wireless network but unable to use internet. Changed static IP adress, etc but no luck. Followed instructions on support email response:
Windows XP:
Start->Control Panel->Network Connections(classic view)->Right click on Local Area connection(wired)/Wireless network connection(wireless)->Properties->Select Internet Protocol(TCP/IP)->Properties->Under General tab, choose "Use the following IP address" and type the IP address, Subnet mask and Default Gateway, DNS and press OK.
Type in the ip address 192.168.2.20
Enter the subnet mask as 255.255.255.0
Enter the default gate way as 192.168.2.1
Type in the primary DNS as 4.2.2.2
Type the alternate DNS as 8.8.8.8
Am currently unstalling and reinstalling. The network is WEP with a long alpha numeric key, which was accepted and network detected and connected. No internet. No internet. No internet.
NetGear DGND3300 Wireless Router Modem 3300 Dual Band?
May 8, 2011I got a NetGear DGND3300 Wireless Router Modem 3300 Dual Band from eBay only to find it will only work in USA.
View 7 Replies View RelatedBoosting Netgear Dual Band Router?
Dec 21, 2012I use a Netgear Dual band router and it works great. I was messing with a PC i bult and screwed something up(of course) I couldn't get a strong signal on either band. I have a Belkin wireless N router that I dont use, can I use it to boost my signal?
View 1 Replies View RelatedHome Network With Preference To Dual Band And Gigabit Functionality
Dec 19, 2011I am currently looking to upgrade and extend my home network with preference to dual band and gigabit functionality. My problem is choosing the correct hardware.I want dual band to separate the network for the kids (a PC, laptop, Xbox 360 and phones all wireless) and set up parental controls and maintain connection speeds etc. For my needs I need the network to be connected to my Onkyo AV Amp (for internet radio and music streaming only), Blu-ray Player, Sky HD satellite box (all wired) and a PS3 (pref wired) and a few wireless devices all N capable. Apart from the obvious gaming capability I would like to be able to stream HD video to the PS3, PC (wired) and laptops via a USB HDD connected for now on an access point or modem router to save on the cost of having separate networked devices.
I currently have ADSL so I was looking to get a dual band gigabit modem router to serve the kids wireless hardware whilst my current hardware is on another floor and is connected with a wire from the existing modem but I have to keep swapping it from PS3 to amp etc.In short I am hoping to have a gigabit, dual band ADSL modem router and connect to a gigabit access point (with dual band if possible) via the cable I have sent to the other floor to wire up the 4 devices. I've currently been looking at Netgear and Buffalo solutions as I've had problems with Linksys and Belkin routers in the past. Would this be possible with just 2 devices (modem router and access point) whilst maintaining decent speeds and if so can someone shed some light as to what I should get.
Belkin Routers :: Play Max N600 HD F7D4401 Dual-Band Signal Very Weak?
Jun 12, 2013belkin play max n600 hd model F7D4401 Dual-Band signal very week so i need the best setup.
View 1 Replies View RelatedReconnect Netgear DGND3300 Dual Band Wireless - N?
Jan 29, 2011I purchased the Netgear a couple of years ago and it worked great. Since I've upgraded to a faster bandwith from Verizon, I can't get the Netgear to work. What am I not doing?
View 1 Replies View RelatedBelkin Routers :: Update F9L1101 N600 DB Wireless Dual-Band USB Adapter From Windows 7 To Windows 8
Nov 25, 2012My new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.
[URL]
Routers / Switches :: Netgear 3300 Dual Band Router 5G Mode Quit Working?
Nov 27, 2011I have had the Netgear 3300 Dual Band for three years. Everytime I wanted to access using my laptop, I had to choose between 2.4G and 5G connection. For about a month now, the 5G does not show up. It doesn't show up as a network to select no matter what device I use. I have reset the router and updated the firmware. Both connection lights are blinking. I recently purchased and IPhone 4 and still I do not have the option of selecting 5G.
View 4 Replies View RelatedNetgear 600 Dual Band Router Connected To A DOCIS 3.0 Cable Modem - Downloading Speed Is Slow?
Mar 25, 2011I have a Netgear 600 dual band router connected to a DOCIS 3.0 cable modem with a 25mps internet connection from my ISP, should be fast right? When I run a speed test on my comp I get 10-13 mbps download on average. Here's the issue, upon visiting my mothers house and running the same speed test I got very similar results. She is running a Lynksys G router on a DOCIS 2.0 cable modem with 12mps connection. My question is, how can this be so, am I at the limits of my comps g network card? as a disclaimer I would like to note I am connected to the G band on both routers.
View 1 Replies View RelatedLinksys Wireless Router :: No Connection To 5GHz Band On E3000 Dual Band?
Apr 14, 2010I have the new XBOX 360 black N wireless adapter and the Linksys E3000 dual band router as I want to upgrade the network range and speed to N. I set up a unique SSID and passphrase (WPA2) for both 2.4GHz and 5GHz bands. My XBOX could connect to the 2.4GHz band network and could connect to XBOX Live. But when I configured all the settings and tried to connect to the 5GHz band network, but no luck. My XBOX just said it failed to connect. I was sure that I did type in the SSID and passphrase correctly. I still cannot figure out what went wrong. I even suspected either the wireless adapter or the router malfunctioned.
View 9 Replies View RelatedTP-Link Dual-Band Wireless :: Unable To Setup The Ftp Server On TL-WDR3500
Nov 4, 2012Model : TL-WDR3500
Hardware Version : Not Clear
Firmware Version :
ISP :
As we say, I followed all the directions but I am unable to setup the ftp server on this router. I even disabled Norton's firewall but am unable to access the server via WAN.
Netgear N300 Dual Band Route Lag?
Jun 25, 2011I have recently purchased a netgear N300 Dual Band router. I am getting some problems with it! I replaced my bog standard belkin 54g router (which never dropped out, never lagged), you just plugged it in, stuck your isp settings in and away you went. Not the same story with this netgear, it promises to give you a better connection in game, but since installing it, all games lag, my laptop is slow browsing, it is getting to the point where we cannot game at all and I am giving up waiting for websites to load! My xbox is connected with ethernet my laptop is wireless, but both lag. Is it to do with the router settings? I am running windows 7 on the laptop, windows xp on another desktop pc, 2 xboxes, one wired one wireless and a wii wireless. All lag!
View 6 Replies View RelatedNetgear WNR3500L - Dual Band Home-use AP
Dec 7, 2012I currently have a NetGear WNR3500L running Tomato acting as an access point. Unfortunately, I think it's crapping out on me... Currently, there are two WiFi security cameras streaming through it to a surveillance server 24/7, and even though it is in a central location in my condo, I get shit signal ~25 feet away (and that's after cranking up the wifi radio to 60mw).
802.11n is a must, and dual SSID's would be nice too... dual band would be totally awesome but not that necessary (I still have some legacy hardware running on G...).
TP-Link Dual-Band Wireless :: Setup TL-WDR4300 Media Server With Xbox 360?
Feb 14, 2013Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Region : Netherlands
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : TL-WDR4300_V1_121225
ISP : Ziggo
Set up the WDR4300 with a USB drive connected (Platinum MyDrive CP 500 GB USB 3.0).Enabled the Media server, shared the entire drive, stuck an test .avi on there.My laptop has no trouble playing it from the attached storage, my Xbox sees the folders and files, recognizes them as playable formats but then does nothing once I hit play to get the file going.If I copy the exact same file to the shared folders on my laptop, navigate from the Xbox to that location it streams within the second.Also tried the same thing with a 16 Gb USB thumbdrive, same result.
Unable To Get The Netgear N600 Setup?
Aug 26, 2012I have a actiontec Wireless N ADSL Modem/Router Model# GT784WN & netgear n600 wndr3400v2 router that I would like to setup as a Wireless Repeater. I can not seem to get the netgear n600 setup.
View 1 Replies View RelatedAr8152 NDIS 6.2 - How To Setup Dual Band
Jun 10, 2012When I try gaming on my computer and someone else is gaming on the ps3 or is on another laptop I run into lots of lag. I've upgraded my internet service for more bandwidth, I forget exactly how much it is. Anyway, I want to connect my normal devices on the 2.4 and my two gaming computers and ps3 on the 5.0. How do I do this and how do I know if my computers and ps3 are even compatible with the 5.0?
The Network adapter for one of the computers is atheros ar8152 NDIS 6.2
TP-Link Dual-Band Wireless :: DHCP Not Working For 6 GHz Band?
Apr 2, 2013Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Centurylink
I'm using a WDR3600 router, and I'm having difficulty with getting internet access on the 5 GHz band. Right now the router is broadcasting in both 2.4 and 5 GHz as two separate APs. The 2.4 GHz band works perfectly fine, but when I connect to the 5 GHz band my device is not assigned an IP address and cannot connect to the internet (or even the router configuration page). Unfortunately, I don't have another device capable of accessing the 5 GHz band, so I can't check to see if the computer is at fault, but both the computer and the router have worked together with no problems before, and this computer has done fine in accessing other 5 GHz bands.
Netgear N600 Wireless Router Stopped Working?
Jan 5, 2012[CODE]My router stopped working when I tried to connect my new Samsung Smart TV to the wireless network by using the menu on the tv. I had to go and press the WSL button on the router. I pressed what I though was the WSL button and now my router doesn't work. I has three lights lit up, the power on light, a small green blinking light and an amber light by the number 1.I've gone to the Netgear website and they want $69 for assistance to get my router up and running. I can buy a new router for that much money. There has to be an easier way.
View 2 Replies View RelatedUsing Old Linksys Wireless N Dual Band Router E2500 As AP?
Jul 31, 2011I just bought a linksys wireless n dual band router e2500 and i want to make my old wrt54g router as an access point. how do i do this and where to start?
View 11 Replies View RelatedLinksys Wireless Router :: EA 3500 Dual Band But Only 1 Available
May 17, 2012I had the store set up my EA3500 which is a dual band...home 1 and home 2. I can only see home 2 which is the smaller band width.
View 1 Replies View RelatedTP-Link Dual-Band Wireless :: Use WDR4300 As Switch Rather Than Router?
Dec 6, 2012Region : UnitedStates
Model : TL-WDR4300
Hardware Version : Not Clear
Firmware Version :
ISP : Verizon DSL
My DSL connection comes into our house in the basement and the DSL modem came with a router included. I bought the WDR4300 for the higher speed wireless connections and the gigabit ports. I really don't need the "router" functionality. I would like to put the WDR4300 on the second floor to give (hopefully) the broadest wireless range. However, I would like all my PCs (including those wirelessly connected) to be on the same sub-net. Is there a way to configure the WDR4300 so it acts like a switch rather than a router?
TP-Link Dual-Band Wireless :: What IP For LAN When TL-WDR4300 Is Secondary Router
Feb 25, 2013Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : fullrate.dk
My ISP has provided me a router: Zyxel P-2601HN which has an ideal WLAN transfer rate of 150 mbps. I live in a concrete 2 story house so signals are weak at best on the other floor - therefore, I Have bought the TL-WDR4300 as an extension for the latter floor. I have connected the routers from LAN to LAN and the Zyxel has 192.168.1.1 on LAN and the TL-WDR4300 had 192.168.0.1 as out set. I have changed this to 192.168.1.2 and all the setup (disabled DHCP + other) seems to work alright. BUT i can not log into the TL-WDR4300 !! Not with http://192.168.1.2 and not with [URL]. What I can do to get into the setup of TL-WDR4300. I know I can alays backup the setting and reset the router and load the setting again, make alterations, saving .....but it kind of drastic !Can the two radios SSID names (2,4 MHz and 5 MHz) be the same name as the SSID name on the Zyxel P-2601HN ? What are the implications ?
Make A Modem Splitter To Hook Up Netgear N600 Wireless Router?
May 1, 2012I have a PC modem and recently purchase a netgear N600 wireless router. Do they make a splitter of some sort. So I can use both the PC and IPad? If they make a splitter?
View 5 Replies View RelatedWireless Router Configuration Netgear N600 It Redirects To Support Website
Apr 6, 2012i've been tring to configure our netgear N600 router, it directs me to the support homepage all the time after we half through the configuration and got disconnected at first try. now i've tried clean dns, reset internet settings, nothing seems to work...
View 1 Replies View RelatedTP-Link Dual-Band Wireless :: TL-WR2543ND - Can't Connect More Than 20 Tablets To The Router
Jan 22, 2013Region : Brazil
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.6 Build 110923 Rel. 53137n
ISP :
I'm trying to use TL-WR2543ND to connect 50 tablets to my wireless network, but as it establish around 20 connections, no other tablet is able to connect to it.
I've made no custom configuration to the wireless settings of the router. Is there anything a need to do to get the 50 connections?
