Netgear WNR3500L - Dual Band Home-use AP
Dec 7, 2012
I currently have a NetGear WNR3500L running Tomato acting as an access point. Unfortunately, I think it's crapping out on me... Currently, there are two WiFi security cameras streaming through it to a surveillance server 24/7, and even though it is in a central location in my condo, I get shit signal ~25 feet away (and that's after cranking up the wifi radio to 60mw).
802.11n is a must, and dual SSID's would be nice too... dual band would be totally awesome but not that necessary (I still have some legacy hardware running on G...).
View 10 Replies
ADVERTISEMENT
Jun 25, 2011
I have recently purchased a netgear N300 Dual Band router. I am getting some problems with it! I replaced my bog standard belkin 54g router (which never dropped out, never lagged), you just plugged it in, stuck your isp settings in and away you went. Not the same story with this netgear, it promises to give you a better connection in game, but since installing it, all games lag, my laptop is slow browsing, it is getting to the point where we cannot game at all and I am giving up waiting for websites to load! My xbox is connected with ethernet my laptop is wireless, but both lag. Is it to do with the router settings? I am running windows 7 on the laptop, windows xp on another desktop pc, 2 xboxes, one wired one wireless and a wii wireless. All lag!
View 6 Replies
View Related
Dec 21, 2012
I use a Netgear Dual band router and it works great. I was messing with a PC i bult and screwed something up(of course) I couldn't get a strong signal on either band. I have a Belkin wireless N router that I dont use, can I use it to boost my signal?
View 1 Replies
View Related
Jan 29, 2011
I purchased the Netgear a couple of years ago and it worked great. Since I've upgraded to a faster bandwith from Verizon, I can't get the Netgear to work. What am I not doing?
View 1 Replies
View Related
Oct 20, 2011
I have a Netgear N600 Dual Band Gigabit Router and my roomate and I both have the wireless xbox and when we connect to xbox live and find a game on call of duty mw2 we lagg our butt off nd we tried changing the channel on the router but it still seems to lag.
View 11 Replies
View Related
Dec 1, 2012
I confused ,with which modem to purchase to set up my n600 wireless dual band gigabit router wndr3700, i'm on boardband with no modem
View 1 Replies
View Related
May 8, 2011
I got a NetGear DGND3300 Wireless Router Modem 3300 Dual Band from eBay only to find it will only work in USA.
View 7 Replies
View Related
Dec 19, 2011
I am currently looking to upgrade and extend my home network with preference to dual band and gigabit functionality. My problem is choosing the correct hardware.I want dual band to separate the network for the kids (a PC, laptop, Xbox 360 and phones all wireless) and set up parental controls and maintain connection speeds etc. For my needs I need the network to be connected to my Onkyo AV Amp (for internet radio and music streaming only), Blu-ray Player, Sky HD satellite box (all wired) and a PS3 (pref wired) and a few wireless devices all N capable. Apart from the obvious gaming capability I would like to be able to stream HD video to the PS3, PC (wired) and laptops via a USB HDD connected for now on an access point or modem router to save on the cost of having separate networked devices.
I currently have ADSL so I was looking to get a dual band gigabit modem router to serve the kids wireless hardware whilst my current hardware is on another floor and is connected with a wire from the existing modem but I have to keep swapping it from PS3 to amp etc.In short I am hoping to have a gigabit, dual band ADSL modem router and connect to a gigabit access point (with dual band if possible) via the cable I have sent to the other floor to wire up the 4 devices. I've currently been looking at Netgear and Buffalo solutions as I've had problems with Linksys and Belkin routers in the past. Would this be possible with just 2 devices (modem router and access point) whilst maintaining decent speeds and if so can someone shed some light as to what I should get.
View 1 Replies
View Related
Nov 27, 2011
I have had the Netgear 3300 Dual Band for three years. Everytime I wanted to access using my laptop, I had to choose between 2.4G and 5G connection. For about a month now, the 5G does not show up. It doesn't show up as a network to select no matter what device I use. I have reset the router and updated the firmware. Both connection lights are blinking. I recently purchased and IPhone 4 and still I do not have the option of selecting 5G.
View 4 Replies
View Related
Aug 6, 2012
I have a Netgear N600 WNDR3700v1 Dual Band Gigabit router and am having a problem with the wired connection with my PC. Everything wireless in the house works fine. In fact, I also have a Direct TV box hooked up for on demand and a sling box hooked up (both wired) and they work find. It's just my PC that is having issues. If I bypass the router and hook straight into the modem, it runs fine also so I have something going on between the router and this PC. I updated the NIC driver and this did not work. Before the update in the device manager, it said it was a NIVIDA nForce Network Controller (if I remember right) and now it says NIVIDA nForce 10/100 Mpbs Ethernet. It was suggested that I change my speed and duplex to match the router after I update but I am unsure what to change it to.
View 11 Replies
View Related
Mar 25, 2011
I have a Netgear 600 dual band router connected to a DOCIS 3.0 cable modem with a 25mps internet connection from my ISP, should be fast right? When I run a speed test on my comp I get 10-13 mbps download on average. Here's the issue, upon visiting my mothers house and running the same speed test I got very similar results. She is running a Lynksys G router on a DOCIS 2.0 cable modem with 12mps connection. My question is, how can this be so, am I at the limits of my comps g network card? as a disclaimer I would like to note I am connected to the G band on both routers.
View 1 Replies
View Related
Jun 18, 2011
I have a Netgear WNR3500L with a Comcast cable modem. The internet was running slow so I rebooted everything. After that I could not see the internet. I tried to reset the Netgear Router, shut down and restart and still the same problem. I plugged the computer directly into the cable modem and everthing works just fine. I'm guessing something happened to the Netgear router but I don't know if it is a setting or something happened to the router itself. The router is about a year old. I can use the default 192.168.1.1 to get into the router but I'm not sure what settings I should try to change.
View 3 Replies
View Related
Jan 17, 2013
Can I put more than one N300 Dual-Band Wi-Fi Range Extender on my home network?
View 4 Replies
View Related
Nov 20, 2011
My home desk top is set up with D-Link Xtreme N Dual Band Router. I have no problems accessing the internet on my desk top computer. I am trying to access my home wireless network through my HP laptop computer. The wireless network status is Limited or no Connectivity. I've tried the "repair" button with no resolution. The wireless connection is set to automatic.
View 1 Replies
View Related
Jun 11, 2011
I just found out I was having packet loss with my toshiba satellite. I have a NetGear WNR3500L freshly installed because the old router (d-ling dir 615) was dropping the connection all the time so we changed it, But now I'm still having problems of lag so I'm well ill do some tests, find out I lose packets so i blame it on the router but then i make the same test on a wired computer wich didnt lose any packets at all. I came to the conclusion it had to be my pc, i did the test both while be wired and wireless.
View 2 Replies
View Related
Apr 14, 2010
I have the new XBOX 360 black N wireless adapter and the Linksys E3000 dual band router as I want to upgrade the network range and speed to N. I set up a unique SSID and passphrase (WPA2) for both 2.4GHz and 5GHz bands. My XBOX could connect to the 2.4GHz band network and could connect to XBOX Live. But when I configured all the settings and tried to connect to the 5GHz band network, but no luck. My XBOX just said it failed to connect. I was sure that I did type in the SSID and passphrase correctly. I still cannot figure out what went wrong. I even suspected either the wireless adapter or the router malfunctioned.
View 9 Replies
View Related
Apr 2, 2013
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Centurylink
I'm using a WDR3600 router, and I'm having difficulty with getting internet access on the 5 GHz band. Right now the router is broadcasting in both 2.4 and 5 GHz as two separate APs. The 2.4 GHz band works perfectly fine, but when I connect to the 5 GHz band my device is not assigned an IP address and cannot connect to the internet (or even the router configuration page). Unfortunately, I don't have another device capable of accessing the 5 GHz band, so I can't check to see if the computer is at fault, but both the computer and the router have worked together with no problems before, and this computer has done fine in accessing other 5 GHz bands.
View 1 Replies
View Related
Oct 29, 2012
I have a Netgear WNR3500L wireless router. I assume it's v1 because on the back it doesn't have "v" anything. Firmware version V1.2.2.44_35.0.53NA.When I connect using g I get 22+Mbps download speed. When I connect using n I get 10 Mbps. I've tried using both WPA2 only (laptop reports 130 Mbps connection I believe) as well as the combo WPA+WPA2 (laptop reports connection of 117 Mbps).Broadband download results don't change - they stay at the 10 Mbps level. I've fiddled with some of the settings on my laptop's wireless card - but the results are the same.For now I'm just trying to figure out where I should focus my investigation and fiddling efforts - on the laptop or on the router.
View 5 Replies
View Related
Jan 29, 2013
I have just bought a D-Link DWA-160 A2 network adapter and it is really slow.I have been using a D-Link DWA-125 N 150 A2 for a while now and it is faster, getting a higher signal.My new network adapter is suppose to be faster.The only thing I can think of is that the software coming with the adapter never installed. I get an error: Wireless adapter not found! insert the adapter now.Thing is, the driver is installed and I can surf the internet.I did some speedtest net tests and I see that my DWA-125 A2 is faster.
View 4 Replies
View Related
Mar 29, 2011
I'm networking a clients home and he specifically wants dual-band wifi through-out. Now he has a fairly large 3 story house, and wanted to place an access point on the top floor to be assured he'll have strong and reliable signal. He's going to have multiple TV's wired into the network, as well as computers, laptops, phones, a Xbox 360 and a PS3. Were using Gigabit switches and a D-link Simultaneous Dual-band Gigabit router.The modem, router, and main 16 port switch will be in his basement in a semi-server room. He currently has 12 lines run throughout his house, 3 to the top floor, 5 to the main floor, and the ability to lay some in the basement if he needs. The 16port switch will plug into the router, I'm also putting an 8 port into the router from the main and top floor. The remaining lines will plug into the switch in the basement. On the top floor I was going to install an AP or Router turned into an AP into the 8port switch.Now the only reason I am considering using a router instead of just getting an AP, is that neither of us can find a simultaneous Dual-band AP. It seems the only simultaneous DB out there is in routers. So, my question is, will I be able to easily use a router as an AP AND get simultaneous Dual-band out of it if I do so? Is there a Simultaneous Dual-band AP on the market that would a better investment?
View 1 Replies
View Related
Feb 10, 2012
I'm trying to save a neighbor some money by fixing their wireless network.WNDR3700 Dual band Netgear router.2.4ghz wireless b/g/n with enabled SSID broadcast, channel= auto, mode set to 130Mbps WPA-TKIP + WPA2-AES. wireless isolation is not enabled.5Ghz wireless a/n enabled SSID broadcast, channel = 44, Mode is up to 300Mbps..No security encription. (i know...bad, but the lady has lots of kids and family members coming and going from the house so she doesn't want one encripted). Video network enabled..Both Radio frequencies are enabled, fragment and CTS/RTS set to max WPS settings = keep existing. IPv6 not enabled, No repeating is enabled, No guest networks are enabled(however ssid broadcast is enabled for guest profile 1)The problem, and reason for fixing the problem is that the 2.4 Ghz band light on the router is ON however the SSID is not being seen by any client in the house. the netgear interface says it is on and working. the neighbor needs the 2.4ghz band to work because the printer is wireless and will only recognize 2.4Ghz SSIDs. Also they have older nintendo DS clients they would like to use on the network.During the day the 5 Ghz band works with very seldom (1-2) disconnects while the 2.4 Ghz band wont be visible to any device. in the evening both bands will come online, and very often will every computer get disconnected from either, the 5Ghz band will stay online longer than the 2.4 band and it seems as though every 10 minutes everyone gets disconnected from 1, and then all the sudden the other band will start working. once every so often both bands will be visable by all computers however only 1 will work.
-Updated the firmware, appeared to fix the problem. Fix only lasted for about 5 hours.
-turned off the router and modem to let them sit. restarted both multiple times.
-Called netgear tech support, asked me about firmware, restarting, then rerouted me someone with more broken English and a horrible phone connection than ive ever seen or heard. then they tried to charge me 30$ for a 1 time. or 100$ for the year. might as well buy a new router at this point in costs.
My personal fix would be to just broadcast on the 5ghz band and wire the printer to the router, buy another router and broadcast the 2.4 ghz one from it, but the lady wants it all to work with the one router. i dont know if the networked has ever worked as intended and ive spent hours reading forums.the main issue is leaving her with internet that she and her family can use so kids can do homework and stuff after i leave the house.
View 4 Replies
View Related
Oct 25, 2011
why is my connection to the interet so bad wh=ith this card i have windows 7 64bitalso my connection to the internet on my laptop is fine but my pci card keeps stopping and low connection when it does start it takes really long for google to load up but on my laptop it loads straight away?
View 1 Replies
View Related
Jun 10, 2012
When I try gaming on my computer and someone else is gaming on the ps3 or is on another laptop I run into lots of lag. I've upgraded my internet service for more bandwidth, I forget exactly how much it is. Anyway, I want to connect my normal devices on the 2.4 and my two gaming computers and ps3 on the 5.0. How do I do this and how do I know if my computers and ps3 are even compatible with the 5.0?
The Network adapter for one of the computers is atheros ar8152 NDIS 6.2
View 1 Replies
View Related
May 27, 2013
We had been purchasing the Aironet 1242AG's but found they are discontinued and we should purchase the 2602E Standalone device. I have noticed that all the antennas are dual band and support MIMO. In the past we would just buy a splitter box and connect it to one of the antenna ports on the AP, and then run cables to antennas and connect those to the splitter box. The antennas were just standard 2.4Ghz 3-5 dBi. We would set that one radio on the AP to transmit and receive. Now I am wondering if this whole setup will change on a 2602E because of the MIMO?I have seen there are MIMO antennas and I am trying to figure out what is compatible and what is not. Is my old way of doing this still going to work but we'll only see G speed? And to get N speed do we need the MIMO antennas in place?
View 5 Replies
View Related
Jul 24, 2011
I just got 3 AP541, the reason for getting this was the dual band , but how to get this AP to actually give both 2.4 and 5 GHZ at the same time?
I have in my other office a Asus RT56, it costs about 1/3 of the Cisco and this supports both 5 and 2.4 GHZ and i get a 450 mbit connection, can only get 130 on the Cisco.
View 1 Replies
View Related
Jul 6, 2012
I just bought a new D-Link N750 DIR-835 Dual Band Router, and I tried installing it to apparently no avail. I used the installation CD and followed all the instructions carefully throughout, but once it was "working," I did a speed test and saw that there was absolutely no difference in speed.
I refuse to believe that this new router, which cost me over $100, would provide no noticeable difference over my old router. Speaking of my old router, I have the original router that Telus sent me for free. It's a Siemens Gigaset SE567, and I've dealt with it a few times when I had internet problems,fiddling with the 192.168.0.1 web address site, configuring the passwords and SSID, and the like. I'm not super-educated on the matter,but I know enough about it that with a thorough explanation, I could probably perform whatever is necessary.
Anyways, like I said, I followed all the instructions and after testing out some simple Youtube videos on both my tablet and laptop, through the wireless network that resulted, it couldn't even load a 480p video without lagging. I know that the router isn't the only thing that ensures speed, but even with my (probably barebottom) internet plan (which my father set up, not me, and knowing my father, it's probably the slowest connection available), I just cannot believe that the resulting network was the best speed available to me. So did I do something wrong? Are the routers interfering with each other? Is that actually the best speed I can achieve? Is that Gigaset even a router? Or is it a modem? Or both?
View 18 Replies
View Related
Jan 28, 2012
I recently purchased a Belkin Dual Band Router and connected to the internet at our side-house we have connected to the house. I'm getting a poor to fair signal out here. Just to mention, there is a lot of traffic passing at all times of the day and night. Busy highway. Is there a way I can boost my wifi signal without buying an actual wifi booster?
View 5 Replies
View Related
Jul 7, 2011
I'm about to jump on the bandwagon and drop my whr-g125 running tomato for a new wireless-n router that runs tomatousb. I can't seem to find a dual-band one that is supported.
Need:
- Wireless-n dual-band (2.4ghz+5ghz). Doesn't have to be the super fast type.. whatever is entry for this.
- At least 1 usb port for printer sharing
- Prefer gigabit, but I can live without
- Must be able to run Tomato in some form, or if I have to, run dd-wrt as a last resort.
View 2 Replies
View Related
Feb 13, 2013
I looked online and I'm still a bit confused whether I should get dual or single band wifi for a laptop that I would like to purchase.
View 2 Replies
View Related
Jul 31, 2011
I just bought a linksys wireless n dual band router e2500 and i want to make my old wrt54g router as an access point. how do i do this and where to start?
View 11 Replies
View Related
May 17, 2012
I had the store set up my EA3500 which is a dual band...home 1 and home 2. I can only see home 2 which is the smaller band width.
View 1 Replies
View Related
Dec 31, 2012
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : Comcast
I have no problems connecting on a 5 GHz band or wired to the router. However any device connecting on 2.4 Ghz gets barely any bandwidth and drops after running for a short time. I have test numerous devices and have the same issue. What was odd is a device on 5GHz that worked fine had the same issue when connecting on 2.4 GHz which seems to say it is only that band. I have an old router that works fine on 2.4 GHz on channel 1 with all the security settings I used on the 4300.
View 14 Replies
View Related
Feb 18, 2013
Region : Netherlands
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 130129
ISP :
I've this dualband wireless router since a week.Now I found out, NFS is working very slow (actually NFS is not working at all).I have a Mede8er and a synology NAS server connected to the TP-LINK WDR3600 router.I have movie directories shared on the NAS using NFS.when I go to the NFS locations in my mede8er it takes very long before I can see the NFS mapping.When I connect the Mede8er straight to the Synology NAS server (Cross Cable connection) NFS is working as it should be.So the TP-LINK WDR3600 cannot handle the NFS protocol?
View 2 Replies
View Related
