Using Old Linksys Wireless N Dual Band Router E2500 As AP?
Jul 31, 2011I just bought a linksys wireless n dual band router e2500 and i want to make my old wrt54g router as an access point. how do i do this and where to start?
View 11 Replies
ADVERTISEMENT
Linksys Wireless Router :: Advanced Dual-Band N E2500 V1.0 Losing Connection
Jan 18, 2012I am using the E2500 v1.0 on TWC network (road runner) wit a VISTA upgraded to Windows 7 laptop.After few months the router is starting losing connection. I tried connecting my laptop directly to the twc modem and the connection is fine, while if I connect to the E2500 v1.0, through wired or wireless connections, I see that the connection is going back and forth.I tried resetting the modem and the router, upgrading the wireless router firmware, but nothing worked.
View 1 Replies View RelatedLinksys Wireless Router :: Adding New E2500 Dual Band To Existing WRT160N?
Sep 25, 2011Too many devices in our home including two playstations and 4 computers. I want to add a Linksys dual band E2500 to my existing WRT160N.
1. I will be able to hard wire the two together too.
2. Which Linksys router should I connect to my cable modem?
Linksys Wireless Router :: No Connection To 5GHz Band On E3000 Dual Band?
Apr 14, 2010I have the new XBOX 360 black N wireless adapter and the Linksys E3000 dual band router as I want to upgrade the network range and speed to N. I set up a unique SSID and passphrase (WPA2) for both 2.4GHz and 5GHz bands. My XBOX could connect to the 2.4GHz band network and could connect to XBOX Live. But when I configured all the settings and tried to connect to the 5GHz band network, but no luck. My XBOX just said it failed to connect. I was sure that I did type in the SSID and passphrase correctly. I still cannot figure out what went wrong. I even suspected either the wireless adapter or the router malfunctioned.
View 9 Replies View RelatedLinksys Wireless Router :: EA 3500 Dual Band But Only 1 Available
May 17, 2012I had the store set up my EA3500 which is a dual band...home 1 and home 2. I can only see home 2 which is the smaller band width.
View 1 Replies View RelatedLinksys Wireless Router :: E3200 Dual Band 5 GHz SSID Not Broadcasting
Aug 20, 2011I changed the 5 GHZ SSID name using Cisco connect on my E3200 router as was expecting to see 2 available wireless networks on my laptop, but it seems that only the 2.4 GHZ is still broadcasting as it was before. When I connect to it with my laptop it shows it connecting with 802.11n, so I would think that my laptop would see the 5 GHz SSID if it was broadcasting. I am trying to take advantage of the dual band feature and connect the 5 GHZ to my blue ray player for real time video streaming.
View 9 Replies View RelatedLinksys Wireless Router :: EA3500 Should Give Different Names To Dual Band Network
Apr 21, 2013I just setup my EA3500 router and both SSID's are the same.Is this ok or should I give them unique names?Since they are the same what are my products connecting to?If I do separate them, what item should connect to what network?
View 5 Replies View RelatedLinksys Wireless Router :: EA4500 And Virgin Superhub Dual Band Settings
Sep 28, 2012I have a Virgin Superhub at home which is capable of 2.4 OR 5GHz wireless. I have a mixture of 2.4 and 5 GHz tech at home so would like to use dual band. My wireless settings on my Superhub modem look like this.As you can see it has settings for 2.4 OR 5GHz and wireless modes of 54, 144 or 300Mbps.
What setting should I be using for my EA4500 to operate in dual band mode? I'm guessing I should put by Virgin Superhub modem in modem mode at 5GHz/300Mbps.I will besetting up seperate SSIDs for 2.4 and 5GHz bands.
Linksys Wireless Router :: E4200 Dual Band Router Compatible With DHCP And VPN
Mar 18, 2012Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN?
View 1 Replies View RelatedTP-Link Dual-Band Wireless :: DHCP Not Working For 6 GHz Band?
Apr 2, 2013Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Centurylink
I'm using a WDR3600 router, and I'm having difficulty with getting internet access on the 5 GHz band. Right now the router is broadcasting in both 2.4 and 5 GHz as two separate APs. The 2.4 GHz band works perfectly fine, but when I connect to the 5 GHz band my device is not assigned an IP address and cannot connect to the internet (or even the router configuration page). Unfortunately, I don't have another device capable of accessing the 5 GHz band, so I can't check to see if the computer is at fault, but both the computer and the router have worked together with no problems before, and this computer has done fine in accessing other 5 GHz bands.
Linksys Dual Band Wireless-N USB Adapter - Internet Randomly Drops And Reconnects
Apr 24, 2011My wireless internet has been acting a bit weird lately. I use a linksys Dual band wireless-N USB adaptor (WUSB600N) to connect to my router, a 2wire 1000sw. I am on windows 7. Recently, the internet has been dropping and reconnecting the connection weirdly; it is apparent in Portal 2 Co-op mode; it says the connection has been lost to the server, and then within 4 seconds, re-joins the server. During that time, the little network icon (the 4 bars in the task bar) says "Identifying."
View 2 Replies View RelatedLinksys Wireless Adapters :: AE1000 Dual Band Selectable On Windows 7 Ultimate 32bit
Aug 15, 2011I have 2 AE1000 USB adapters and according to the Linksys website these are wirelessN dual band selectable adapters. I finally hooked up my new e4200 dual band router and the ae1000 connect but I don't see anywhere on the screen in windows 7 ultimate 32bit that you can change the band?
View 1 Replies View RelatedTP-Link Dual-Band Wireless :: Use WDR4300 As Switch Rather Than Router?
Dec 6, 2012Region : UnitedStates
Model : TL-WDR4300
Hardware Version : Not Clear
Firmware Version :
ISP : Verizon DSL
My DSL connection comes into our house in the basement and the DSL modem came with a router included. I bought the WDR4300 for the higher speed wireless connections and the gigabit ports. I really don't need the "router" functionality. I would like to put the WDR4300 on the second floor to give (hopefully) the broadest wireless range. However, I would like all my PCs (including those wirelessly connected) to be on the same sub-net. Is there a way to configure the WDR4300 so it acts like a switch rather than a router?
TP-Link Dual-Band Wireless :: What IP For LAN When TL-WDR4300 Is Secondary Router
Feb 25, 2013Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : fullrate.dk
My ISP has provided me a router: Zyxel P-2601HN which has an ideal WLAN transfer rate of 150 mbps. I live in a concrete 2 story house so signals are weak at best on the other floor - therefore, I Have bought the TL-WDR4300 as an extension for the latter floor. I have connected the routers from LAN to LAN and the Zyxel has 192.168.1.1 on LAN and the TL-WDR4300 had 192.168.0.1 as out set. I have changed this to 192.168.1.2 and all the setup (disabled DHCP + other) seems to work alright. BUT i can not log into the TL-WDR4300 !! Not with http://192.168.1.2 and not with [URL]. What I can do to get into the setup of TL-WDR4300. I know I can alays backup the setting and reset the router and load the setting again, make alterations, saving .....but it kind of drastic !Can the two radios SSID names (2,4 MHz and 5 MHz) be the same name as the SSID name on the Zyxel P-2601HN ? What are the implications ?
Can't Setup Netgear N600 Wireless Dual Band Gigabit Router
Dec 1, 2012I confused ,with which modem to purchase to set up my n600 wireless dual band gigabit router wndr3700, i'm on boardband with no modem
View 1 Replies View RelatedNetGear DGND3300 Wireless Router Modem 3300 Dual Band?
May 8, 2011I got a NetGear DGND3300 Wireless Router Modem 3300 Dual Band from eBay only to find it will only work in USA.
View 7 Replies View RelatedTP-Link Dual-Band Wireless :: TL-WR2543ND - Can't Connect More Than 20 Tablets To The Router
Jan 22, 2013Region : Brazil
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.6 Build 110923 Rel. 53137n
ISP :
I'm trying to use TL-WR2543ND to connect 50 tablets to my wireless network, but as it establish around 20 connections, no other tablet is able to connect to it.
I've made no custom configuration to the wireless settings of the router. Is there anything a need to do to get the 50 connections?
TP-Link Dual-Band Wireless :: TL-WDR4300 / Upgrade Router With Firmware?
Feb 21, 2013Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 1
ISP : cox.net
I have downloaded the file TL-wdr3600_v1_130129.zip. Extracted the file to a temp folder. Thje file is a bin file which is a bin image wdr3600v1_en_3_13_26_up(1301).bin. I do not see any flash file to load this to the router.
TP-Link Dual-Band Wireless :: TL-WDR4300 - How To Check Who Is Connected To Router
Apr 11, 2013Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : Teksavvy
how can I see who connected to my router?
TP-Link Dual-Band Wireless :: TL-WDR4300 - OpenVPN UDP Connections Are Being Blocked By Router
Apr 14, 2013Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : Latest
ISP :
The UDP connections are being blocked when I use my VPN. I can connect for a while but soon after a while, the connection doesn't work. I can't even access the router page.
TP-Link Dual-Band Wireless :: TL-WDR4300 Bandwidth Slow Down When Router Plugged In
Feb 24, 2013Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.17 Build 120426 Rel.29216n
ISP : Bell Canada
Just had my line upgraded to 50mbit down, and 10mbit up. Whenever the router is between the PC and the modem, my speeds drop to 30mbit. If i plug directly into the modem, I get the full 50Mbit. Upload speeds are always 10mbit.I've tried power cycling devices, and even replaced all cables with cat6 (which I know isn't the issue, but i'm just trying to eliminate everything)
TP-Link Dual-Band Wireless :: TL-WD2543ND Router Settings For Smarbro Wimax
Dec 4, 2012Region : Philippines
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version :
ISP : Smartbro WiMax
I'm using the router TL-WR2543ND, I have pesonally configured the router myself, I'm no that good in computer but I managed to do so. I never had difficulty doing it. I have decided to switch to Smartbro Wimax and tried to connect it to my tp-link router but no luck. I browsed the net for possible instructions to do it but just frustrates me. I have changed the IP address of the router to avoid conflict, cloned the MAC address, still unable to connect the router.
TP-Link Dual-Band Wireless :: Have To Reboot WDR4300 Router Daily To Keep Vonage
Feb 28, 2013Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
ISP : Comcast
TP-LINK WDR4300 750N Dual-Band router issue.
I started having a problem with a VONAGE V-Portal VoIP adapter losing connection to the Vonage server. I Unplugging the adapter and waiting doesn't solve the problem. The only way I can temporarily fix the issue is to reboot my TP-Link router. Once the router is rebooted the adapter can connect to Vonage. After a few hours it loses connection again. I have set the adapter to use a static IP outside of the DHCP reserved pool. This didn't fix the issue.
I have had vonage for many years and this router for the last 10 months and not had a problem until the past two weeks. Nothing only my local network changed. All of my PC's have no problems with internet access during the time that the Vonage adapter gets an Error 004 (lost connectivity). I still have connectivity with my ipod touch and other internet enabled devices as well. I was using 8.8.8.8 as my DNS server in the router DHCP configuration as well as the static value when I tried using a static IP with the V-Portal. I then switched all system to the ISP (Comcast) preferred DNS servers. The problem still exists. The only way to get the Vonage adapter back to running is to reboot the router.
I should mention I have Motorola Cable modem to a TP-LINK WDR4300 750N Dual-Band router. I have two Vonage vportal adapters plugged into the a couple of the LAN ports on the TP-LINK router. One vportal is my roommates, one is mine. Everything has been working fine for the last 6 months and now one or the other Vportal loses communication through the router, but the other vportal doesn't lose connectivity. It only happens to one of them and it varies as to which one will ERROR out.
Belkin Routers :: How To Bridge N600 DB Wireless Dual-Band Router F9K1102
Dec 31, 2012Is there a way to Bridge N600 DB Wireless Dual-Band N+ Router F9K1102?
View 1 Replies View RelatedLinksys Cisco Dual Band Pci Adapter?
Oct 25, 2011why is my connection to the interet so bad wh=ith this card i have windows 7 64bitalso my connection to the internet on my laptop is fine but my pci card keeps stopping and low connection when it does start it takes really long for google to load up but on my laptop it loads straight away?
View 1 Replies View RelatedTP-Link Dual-Band Wireless :: Port Forward Through TD-8817 Modem > TL-WDR-3600 Router > PC?
Mar 13, 2013Region : Ireland
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Smart
I have
A TP-Link TD-8817 Modem with IP Address 192.168.1.1
A TP-Link TL-WDR-3600 Router with IP Address 192.168.0.1
A PC with IP Address 192.168.0.100
I figured out that I can only enter an IP Address with the range 192.168.1.* when port forwarding on the modem, ie I cant enter 192.168.0.100 for the PC.Is there any way of Port Forwarding to the PC?
TP-Link Dual-Band Wireless :: Low Signal Range From WDR4300 Router On Both Bands And Especially On 5Ghz
Mar 24, 2013Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : Build 121225 Rel.37950n
I have low signal range from this WDR4300 router on both bands and especially on 5Ghz i lose my connectivity on just few meters away from the router and on other rooms in my 80m2 apartment, i also own another tp link 740n with only one antenna and the range is better with it almost covers all my apartment. Router has been reset after being updated to latest firmware and tried different configurations but im not satisfied with the signal range. Is there something i can do.
Wireless Router N600 Wireless Dual Band Router WNDR3400 - Unable To Connect With Internet?
Feb 7, 2011The internet at my parents house has recently gone on the fritz..the wireless router is a N600 Wireless Dual Band Router WNDR3400..The computers of the house are able to connect to it..But it does not allow internet connections..The 3 computers are an HP Laptop running windows 7.a Dell Dimension E521 Running windows 7 & and an older HP Walmart special running XP.They can connect to outside systems and through a wired connection to the Modem from Cable vision. They replaced the wireless router and the problem continues.Internet is capable by plugging directly into the Cable vision router,unfortunately do not have the cables to try through the Netgear router to test that out..
View 3 Replies View RelatedD-Link Xtreme N Dual Band Router / Access Home Wireless Network Through HP Laptop Computer
Nov 20, 2011My home desk top is set up with D-Link Xtreme N Dual Band Router. I have no problems accessing the internet on my desk top computer. I am trying to access my home wireless network through my HP laptop computer. The wireless network status is Limited or no Connectivity. I've tried the "repair" button with no resolution. The wireless connection is set to automatic.
View 1 Replies View RelatedTP-Link Dual-Band Wireless :: TL-WDR3600 - Binding Settings Can't Apply Automatically After Router Reboot
Mar 17, 2013Region : Germany
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
all my systems are configured under "IP & MAC Binding". Binding is activated globally and all check marks for every ID are set. After i finished my configurations, the "ARP List" status shows, that everything is bound - so far everything is great. The problem appears after a router reboot or after shutting the router down and powering it on again. The "ARP List" then shows only a few of my IDs and their status is unbound. I need to go back to the "Binding Settings" and hit "Save" - after that all my IDs appear in the ARP-List and everything is OK again.
TP-Link Dual-Band Wireless :: TL-WDR7500 11AC 1500 - Unable To Connect Without A Router Reboot
Apr 16, 2013Region : UnitedStates
Model : TL-WDR4900
Hardware Version : Not Clear
Firmware Version : 3.13.29 B 130126 R 50426n
ISP : Comcast
1. Any device which is switched off (WiFi turned off) wont be able to connect again without a router reboot. I get a connection timeout error when trying to connect. Happens only when there are more than 3 devices connected. (all my devices are ARP linked to MAC addresses with fixed IP addresses - I thought this would eleminate the problem but not)
2. Streaming videos stop playing after 5 minutes. I have to click on the play button to start the stream again. When I test the internet speed through speedtest.net or speedtest.comcast.net, I get over 40MBPS consistently.
3. The router doesnt recogonize 3TB or above HDDs on either ports
4. As long as all devices connect to one channel (either 5G or 2.4G), the connectivity speed is excellent. The moment a device connects to the other channel, the connection speed fluctuates a lot on both.
Using A Dual - Band Router As An Access Point?
Mar 29, 2011I'm networking a clients home and he specifically wants dual-band wifi through-out. Now he has a fairly large 3 story house, and wanted to place an access point on the top floor to be assured he'll have strong and reliable signal. He's going to have multiple TV's wired into the network, as well as computers, laptops, phones, a Xbox 360 and a PS3. Were using Gigabit switches and a D-link Simultaneous Dual-band Gigabit router.The modem, router, and main 16 port switch will be in his basement in a semi-server room. He currently has 12 lines run throughout his house, 3 to the top floor, 5 to the main floor, and the ability to lay some in the basement if he needs. The 16port switch will plug into the router, I'm also putting an 8 port into the router from the main and top floor. The remaining lines will plug into the switch in the basement. On the top floor I was going to install an AP or Router turned into an AP into the 8port switch.Now the only reason I am considering using a router instead of just getting an AP, is that neither of us can find a simultaneous Dual-band AP. It seems the only simultaneous DB out there is in routers. So, my question is, will I be able to easily use a router as an AP AND get simultaneous Dual-band out of it if I do so? Is there a Simultaneous Dual-band AP on the market that would a better investment?
View 1 Replies View RelatedBoosting Netgear Dual Band Router?
Dec 21, 2012I use a Netgear Dual band router and it works great. I was messing with a PC i bult and screwed something up(of course) I couldn't get a strong signal on either band. I have a Belkin wireless N router that I dont use, can I use it to boost my signal?
View 1 Replies View Related