Belkin Routers :: How To Bridge N600 DB Wireless Dual-Band Router F9K1102

Dec 31, 2012

Is there a way to Bridge N600 DB Wireless Dual-Band N+ Router F9K1102?

View 1 Replies


ADVERTISEMENT

Belkin Routers :: N600 DB Wireless Dual-Band USB Adapter / Windows 8

Nov 18, 2012

I got the N600 DB Wireless Dual-Band USB Adapter in October 2012. How do I install it on Windows 8?

View 1 Replies View Related

Belkin Routers :: Firmware Compatibility With N600 Hd Wireless Dual Band

Apr 1, 2013

I have belkin n600 hd wireless dual band n router f7d8301 v1. do i need to do any firmware upgrade? should i down load and install V3 of firmware of V1 only? i want to increase / enhance the range of WiFi.

View 1 Replies View Related

Belkin Routers :: F9L1101 N600 DB Wireless Dual-Band USB Adapter / No Internet

Nov 13, 2012

F9L1101 N600 DB Wireless Dual-Band USB Adapter : recognizing and connecting to wireless network but unable to use internet. Changed static IP adress, etc but no luck. Followed instructions on support email response:

Windows XP:

Start->Control Panel->Network Connections(classic view)->Right click on Local Area connection(wired)/Wireless network connection(wireless)->Properties->Select Internet Protocol(TCP/IP)->Properties->Under General tab, choose "Use the following IP address" and type the IP address, Subnet mask and Default Gateway, DNS and press OK.
Type in the ip address 192.168.2.20
Enter the subnet mask as 255.255.255.0
Enter the default gate way as 192.168.2.1
Type in the primary DNS as 4.2.2.2
Type the alternate DNS as 8.8.8.8

Am currently unstalling and reinstalling. The network is WEP with a long alpha numeric key, which was accepted and network detected and connected. No internet. No internet. No internet.

View 3 Replies View Related

Belkin Routers :: Play Max N600 HD F7D4401 Dual-Band Signal Very Weak?

Jun 12, 2013

belkin play max n600 hd model F7D4401 Dual-Band signal very week so i need the best setup.

View 1 Replies View Related

Belkin Routers :: Firmware For F9K1102 V1 N600?

Mar 1, 2013

I'm a bit confused about Belkin's firmware upgrading. I lookup the firmware for my router N600 (F9K1102v1) and see that I've got options for v1, v2, and v3. Is it possible to upgrade my router to the v3 firmware? I'm guessing that I can't because its a v1 router, but just thought I'd ask just in case I can. Don't want to brick the thing.

View 2 Replies View Related

Belkin Routers :: Update F9L1101 N600 DB Wireless Dual-Band USB Adapter From Windows 7 To Windows 8

Nov 25, 2012

My new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.

[URL]

View 1 Replies View Related

Belkin Routers :: N600 DB N+ - Choosing Band To Use

Jan 19, 2013

The Belkin N600 DB N+ Router. It has 2 seperate networks for optimum performance, how do i go about choosing which band I want to use? Under the Belkin desktop I can clearly see 2 SSID's. One shows 2.4 GHz SSID & network name and the other 5GHz SSID & network name. media. But when I pull up my wireless connections I only see 1 network.

View 1 Replies View Related

Can't Setup Netgear N600 Wireless Dual Band Gigabit Router

Dec 1, 2012

I confused ,with which modem to purchase to set up my n600 wireless dual band gigabit router wndr3700, i'm on boardband with no modem

View 1 Replies View Related

Belkin Routers :: Dual-Band Wireless Range Extender F9K1106 With AirPort Extreme?

Jan 12, 2013

Does the Dual-Band Wireless Range Extender #F9K1106 work with the Apple AirPort Extreme Base Station?

View 1 Replies View Related

Netgear N600 Dual Band Gigabit Router - Channel Changed But It Still Seems To Lag?

Oct 20, 2011

I have a Netgear N600 Dual Band Gigabit Router and my roomate and I both have the wireless xbox and when we connect to xbox live and find a game on call of duty mw2 we lagg our butt off nd we tried changing the channel on the router but it still seems to lag.

View 11 Replies View Related

Wireless Router N600 Wireless Dual Band Router WNDR3400 - Unable To Connect With Internet?

Feb 7, 2011

The internet at my parents house has recently gone on the fritz..the wireless router is a N600 Wireless Dual Band Router WNDR3400..The computers of the house are able to connect to it..But it does not allow internet connections..The 3 computers are an HP Laptop running windows 7.a Dell Dimension E521 Running windows 7 & and an older HP Walmart special running XP.They can connect to outside systems and through a wired connection to the Modem from Cable vision. They replaced the wireless router and the problem continues.Internet is capable by plugging directly into the Cable vision router,unfortunately do not have the cables to try through the Netgear router to test that out..

View 3 Replies View Related

Belkin Routers :: N750 DB - How To Utilize Dual Band Feature

Dec 1, 2012

How do I utilize the dual band feature on my belkin N750 DB? Do I have to set up two separate networks? Even then how when my devices PC, iPod, gaming devices are only recognizing the 2.4GHz band network?

View 3 Replies View Related

Slow Wired Connection On Netgear N600 WNDR3700v1 Dual Band Gigabit Router?

Aug 6, 2012

I have a Netgear N600 WNDR3700v1 Dual Band Gigabit router and am having a problem with the wired connection with my PC. Everything wireless in the house works fine. In fact, I also have a Direct TV box hooked up for on demand and a sling box hooked up (both wired) and they work find. It's just my PC that is having issues. If I bypass the router and hook straight into the modem, it runs fine also so I have something going on between the router and this PC. I updated the NIC driver and this did not work. Before the update in the device manager, it said it was a NIVIDA nForce Network Controller (if I remember right) and now it says NIVIDA nForce 10/100 Mpbs Ethernet. It was suggested that I change my speed and duplex to match the router after I update but I am unsure what to change it to.

View 11 Replies View Related

Cabling / Cards :: WNDR 3400 N600 Dual Band Router - Experiencing Lag Spikes In Xbox

Mar 24, 2011

My problem is with xbox live, i have the WNDR 3400 N600 Dual Band Router and i have been experiencing lag spikes since the day i have gotten it. I used to have a wireless adapter and i thought that was the problem so i recently went out and bought a 200 ft ethernet cable so now im hardlined to the router I have the xbox set to highest priority, i have it set with a static ip address for the dmz so i have no restrictions, i have all ports opened just in case, i have great internet speeds : 18.04 mbps download and 4.03 mbps upload and nothing seems to work.. i still have lag that sometimes disconnects me from xbox live and ruins the whole gaming experience.

View 3 Replies View Related

Belkin Routers :: Put More Than One N300 Dual-band Wifi Range Extender On Home Network?

Jan 17, 2013

Can I put more than one N300 Dual-Band Wi-Fi Range Extender on my home network?

View 4 Replies View Related

Belkin Routers :: Change NAT Type From Moderate To Open For Xbox 360 N450 Dual Band?

Dec 31, 2012

How to change my NAT type from moderate to open for xbox 360. Belkin n450 dual band

View 1 Replies View Related

Belkin Routers :: Is F9k1102 V3000 Windows 8 Compatible?

Jan 16, 2013

I just bought this router for my new windows 8 desk top computer. I will be connecting it to the computer via ethernet. The box does not say that this is windows 8 compatible. Will this work with my new computer?

View 2 Replies View Related

Belkin Routers :: F9K1102 V3 Access Point IP Error

Mar 23, 2013

When I set up the Belkin F9K1102 as an access point I can no longer access it via the ip-address and it does not accept the new ip-address I've given it, but takes the ip-address 192.168.2.254, while my network is on the 192.168.1.XXX address series. The only way I can do this is by manually given the router a new address, then manually turn of the DHCP- server and finally move the internet cable from the WAN port to one of the LAN ports - but then the LED-indicator on the router is blinkin red.

View 2 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - WDS Bridge Not Working

Jan 8, 2013

Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

I recently bought the N750 wireless dual band router and I would like to setup a bridge with another router that I'm currently using.

I have followed the instructions in the documentation [URL]. But I've had 0 success in getting this to work.

How to get this feature to work?

Additional info:

I followed each step to the letter. In the last step when my router reboots I noticed that the System light doesn't flash. Which indicates that there is a system error (according to the user manual). But I'm unable to determine what the system error is because I can no longer log into my router's Administration page anymore.

in the instructions (link above) it says to disable DHCP, so I manually assign an IP address to my computer setting the gateway IP address to the IP address I manually assigned to my router. I can see that a connection to the router is established, but I'm unable connect to the internet and when I type in the IP address of my router I'm unable to get into the administration menu.

I checked the wireless connections on my source router and I don't see the IP address of the N750 router.

View 5 Replies View Related

Belkin Dual Band Router - To Boost Up Wifi

Jan 28, 2012

I recently purchased a Belkin Dual Band Router and connected to the internet at our side-house we have connected to the house. I'm getting a poor to fair signal out here. Just to mention, there is a lot of traffic passing at all times of the day and night. Busy highway. Is there a way I can boost my wifi signal without buying an actual wifi booster?

View 5 Replies View Related

Tp-link Dual-band Wireless :: Tl-wdr3600 As Wifi Client Bridge

Jan 29, 2013

Region : Poland
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP :

I have some linksys router that I used as wireless client bridge. I have main router that is connected to Internet and linksys router which is connected to main router's WiFi. Linksys router acts as client bridge connecting LAN devices to main router. Now I own TL-WDR3600 and I would like to replace linksys router. How can I achieve the same on TP-Link router? I don't see any option for setting wireless operation mode.

View 3 Replies View Related

Linksys Wireless Router :: No Connection To 5GHz Band On E3000 Dual Band?

Apr 14, 2010

I have the new XBOX 360 black N wireless adapter and the Linksys E3000 dual band router as I want to upgrade the network range and speed to N. I set up a unique SSID and passphrase (WPA2) for both 2.4GHz and 5GHz bands. My XBOX could connect to the 2.4GHz band network and could connect to XBOX Live. But when I configured all the settings and tried to connect to the 5GHz band network, but no luck. My XBOX just said it failed to connect. I was sure that I did type in the SSID and passphrase correctly. I still cannot figure out what went wrong. I even suspected either the wireless adapter or the router malfunctioned.

View 9 Replies View Related

Belkin Routers :: N600 Using Both Frequencies On Router

Apr 20, 2013

I have a wi fi capable blu ray player which works on wireless g connections, and I also have 2 computers. I have the N600 Dual Band router, and want to know if it is possible to transmit on both frequencies? I am only seeing the 2.4ghz show up for a connection.

View 1 Replies View Related

Belkin Routers :: F9K1102 V1 Guest Access While In Access Point Mode

Jan 17, 2013

I have an n600 ( F9K1102 v1 , firmware 1.00.09 ). My ISP provides my main router for my network, but I want to use the N600 as an access point, I have activated the "Use as Access Point" feature.Is it possible to still utilize the Guest Access feature in this case?

View 1 Replies View Related

Belkin Routers :: Using N600 As Wireless Adapter?

Jun 7, 2013

Upstairs I have a Century Link modem/wireless router. My wife and I use our laptops, smart phones, and XBox 360 on the wireless network. Downstairs I have an older Dell PC that I use for my business. I have an Ethernet run from upstairs to downstairs. The Ethernet jack upstairs is near a cable outlet because we used to have cable internet. Now we have DSL and the phone jack is on the other side of the room. Here's my question... I have a Belkin N600 wireless router, is there any way I can plug it into the Ethernet port on the other side of the room, and use it like a wireless adapter? I have tried a few time to set it up as an "access point" but it doesn't seem to work. As soon as I do, I can no longer access the Belkin router to make any changes and I need to do a manual reset. can I plug my downstairs PC into the Belkin N600, and have wi-fi internet access from the wireless modem/router upstairs?

View 2 Replies View Related

Belkin Routers :: Connect 2 N600 Wireless To Extend Range?

Nov 1, 2012

I have a 3 story townhouse and want to have one n600 connected to my modem on the 3rd floor and then have the other downstairs connected through wireless to the one upstairs. I have seen lyncsys will do this but will the belkins?

View 1 Replies View Related

Routers / Switches :: Netgear 3300 Dual Band Router 5G Mode Quit Working?

Nov 27, 2011

I have had the Netgear 3300 Dual Band for three years. Everytime I wanted to access using my laptop, I had to choose between 2.4G and 5G connection. For about a month now, the 5G does not show up. It doesn't show up as a network to select no matter what device I use. I have reset the router and updated the firmware. Both connection lights are blinking. I recently purchased and IPhone 4 and still I do not have the option of selecting 5G.

View 4 Replies View Related

Belkin Routers :: Can Connect Wireless Range Extender N300 To N600 For Better Coverage

Oct 21, 2012

I have decided to buy belkin n600 router. my question is can i connect Belkin wireless range extender n300 to belkin n 600 for beater coverage. is this possible ? if possible how many extender i can connect to the router and also can i connect extender with wire and wireless.

View 12 Replies View Related

TP-Link Dual-Band Wireless :: DHCP Not Working For 6 GHz Band?

Apr 2, 2013

Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Centurylink

I'm using a WDR3600 router, and I'm having difficulty with getting internet access on the 5 GHz band. Right now the router is broadcasting in both 2.4 and 5 GHz as two separate APs. The 2.4 GHz band works perfectly fine, but when I connect to the 5 GHz band my device is not assigned an IP address and cannot connect to the internet (or even the router configuration page). Unfortunately, I don't have another device capable of accessing the 5 GHz band, so I can't check to see if the computer is at fault, but both the computer and the router have worked together with no problems before, and this computer has done fine in accessing other 5 GHz bands.

View 1 Replies View Related

Belkin Routers :: N600 Incompatible With LAN?

Dec 12, 2012

N600 router will not comunicate with my desktop computer through a cisco switch. The LAN was working fine when I was using a Linksys router. Is this a compatability problem between Belkin and Linksys products?

View 1 Replies View Related

Belkin Routers :: N600 DB - Set Up Software

Mar 4, 2013

Where can I get the setup software for my N600DB USB adapter, I cannot find the CD I got with my wireless adapter.

View 1 Replies View Related

Belkin Routers :: N600 Says No To Scanner

Feb 13, 2013

I have a N600dp. My printer, Brother MFC-J410W, is plugged into the router USB port. The printer function works but the scanner function doesn't. I keep getting an error message that the printer is not connected.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved