I have a Netgear N600 Dual Band Gigabit Router and my roomate and I both have the wireless xbox and when we connect to xbox live and find a game on call of duty mw2 we lagg our butt off nd we tried changing the channel on the router but it still seems to lag.
View 11 Replies
I confused ,with which modem to purchase to set up my n600 wireless dual band gigabit router wndr3700, i'm on boardband with no modem
View 1 Replies View RelatedI have a Netgear N600 WNDR3700v1 Dual Band Gigabit router and am having a problem with the wired connection with my PC. Everything wireless in the house works fine. In fact, I also have a Direct TV box hooked up for on demand and a sling box hooked up (both wired) and they work find. It's just my PC that is having issues. If I bypass the router and hook straight into the modem, it runs fine also so I have something going on between the router and this PC. I updated the NIC driver and this did not work. Before the update in the device manager, it said it was a NIVIDA nForce Network Controller (if I remember right) and now it says NIVIDA nForce 10/100 Mpbs Ethernet. It was suggested that I change my speed and duplex to match the router after I update but I am unsure what to change it to.
View 11 Replies View RelatedIs there a way to Bridge N600 DB Wireless Dual-Band N+ Router F9K1102?
View 1 Replies View RelatedMy problem is with xbox live, i have the WNDR 3400 N600 Dual Band Router and i have been experiencing lag spikes since the day i have gotten it. I used to have a wireless adapter and i thought that was the problem so i recently went out and bought a 200 ft ethernet cable so now im hardlined to the router I have the xbox set to highest priority, i have it set with a static ip address for the dmz so i have no restrictions, i have all ports opened just in case, i have great internet speeds : 18.04 mbps download and 4.03 mbps upload and nothing seems to work.. i still have lag that sometimes disconnects me from xbox live and ruins the whole gaming experience.
View 3 Replies View RelatedI use a Netgear Dual band router and it works great. I was messing with a PC i bult and screwed something up(of course) I couldn't get a strong signal on either band. I have a Belkin wireless N router that I dont use, can I use it to boost my signal?
View 1 Replies View RelatedI got the N600 DB Wireless Dual-Band USB Adapter in October 2012. How do I install it on Windows 8?
View 1 Replies View RelatedI have belkin n600 hd wireless dual band n router f7d8301 v1. do i need to do any firmware upgrade? should i down load and install V3 of firmware of V1 only? i want to increase / enhance the range of WiFi.
View 1 Replies View RelatedI am currently looking to upgrade and extend my home network with preference to dual band and gigabit functionality. My problem is choosing the correct hardware.I want dual band to separate the network for the kids (a PC, laptop, Xbox 360 and phones all wireless) and set up parental controls and maintain connection speeds etc. For my needs I need the network to be connected to my Onkyo AV Amp (for internet radio and music streaming only), Blu-ray Player, Sky HD satellite box (all wired) and a PS3 (pref wired) and a few wireless devices all N capable. Apart from the obvious gaming capability I would like to be able to stream HD video to the PS3, PC (wired) and laptops via a USB HDD connected for now on an access point or modem router to save on the cost of having separate networked devices.
I currently have ADSL so I was looking to get a dual band gigabit modem router to serve the kids wireless hardware whilst my current hardware is on another floor and is connected with a wire from the existing modem but I have to keep swapping it from PS3 to amp etc.In short I am hoping to have a gigabit, dual band ADSL modem router and connect to a gigabit access point (with dual band if possible) via the cable I have sent to the other floor to wire up the 4 devices. I've currently been looking at Netgear and Buffalo solutions as I've had problems with Linksys and Belkin routers in the past. Would this be possible with just 2 devices (modem router and access point) whilst maintaining decent speeds and if so can someone shed some light as to what I should get.
belkin play max n600 hd model F7D4401 Dual-Band signal very week so i need the best setup.
View 1 Replies View RelatedF9L1101 N600 DB Wireless Dual-Band USB Adapter : recognizing and connecting to wireless network but unable to use internet. Changed static IP adress, etc but no luck. Followed instructions on support email response:
Windows XP:
Start->Control Panel->Network Connections(classic view)->Right click on Local Area connection(wired)/Wireless network connection(wireless)->Properties->Select Internet Protocol(TCP/IP)->Properties->Under General tab, choose "Use the following IP address" and type the IP address, Subnet mask and Default Gateway, DNS and press OK.
Type in the ip address 192.168.2.20
Enter the subnet mask as 255.255.255.0
Enter the default gate way as 192.168.2.1
Type in the primary DNS as 4.2.2.2
Type the alternate DNS as 8.8.8.8
Am currently unstalling and reinstalling. The network is WEP with a long alpha numeric key, which was accepted and network detected and connected. No internet. No internet. No internet.
The internet at my parents house has recently gone on the fritz..the wireless router is a N600 Wireless Dual Band Router WNDR3400..The computers of the house are able to connect to it..But it does not allow internet connections..The 3 computers are an HP Laptop running windows 7.a Dell Dimension E521 Running windows 7 & and an older HP Walmart special running XP.They can connect to outside systems and through a wired connection to the Modem from Cable vision. They replaced the wireless router and the problem continues.Internet is capable by plugging directly into the Cable vision router,unfortunately do not have the cables to try through the Netgear router to test that out..
View 3 Replies View RelatedI got a NetGear DGND3300 Wireless Router Modem 3300 Dual Band from eBay only to find it will only work in USA.
View 7 Replies View RelatedI have had the Netgear 3300 Dual Band for three years. Everytime I wanted to access using my laptop, I had to choose between 2.4G and 5G connection. For about a month now, the 5G does not show up. It doesn't show up as a network to select no matter what device I use. I have reset the router and updated the firmware. Both connection lights are blinking. I recently purchased and IPhone 4 and still I do not have the option of selecting 5G.
View 4 Replies View RelatedI have a Netgear 600 dual band router connected to a DOCIS 3.0 cable modem with a 25mps internet connection from my ISP, should be fast right? When I run a speed test on my comp I get 10-13 mbps download on average. Here's the issue, upon visiting my mothers house and running the same speed test I got very similar results. She is running a Lynksys G router on a DOCIS 2.0 cable modem with 12mps connection. My question is, how can this be so, am I at the limits of my comps g network card? as a disclaimer I would like to note I am connected to the G band on both routers.
View 1 Replies View RelatedI have recently purchased a netgear N300 Dual Band router. I am getting some problems with it! I replaced my bog standard belkin 54g router (which never dropped out, never lagged), you just plugged it in, stuck your isp settings in and away you went. Not the same story with this netgear, it promises to give you a better connection in game, but since installing it, all games lag, my laptop is slow browsing, it is getting to the point where we cannot game at all and I am giving up waiting for websites to load! My xbox is connected with ethernet my laptop is wireless, but both lag. Is it to do with the router settings? I am running windows 7 on the laptop, windows xp on another desktop pc, 2 xboxes, one wired one wireless and a wii wireless. All lag!
View 6 Replies View RelatedI currently have a NetGear WNR3500L running Tomato acting as an access point. Unfortunately, I think it's crapping out on me... Currently, there are two WiFi security cameras streaming through it to a surveillance server 24/7, and even though it is in a central location in my condo, I get shit signal ~25 feet away (and that's after cranking up the wifi radio to 60mw).
802.11n is a must, and dual SSID's would be nice too... dual band would be totally awesome but not that necessary (I still have some legacy hardware running on G...).
My new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.
[URL]
I purchased the Netgear a couple of years ago and it worked great. Since I've upgraded to a faster bandwith from Verizon, I can't get the Netgear to work. What am I not doing?
View 1 Replies View RelatedI have the new XBOX 360 black N wireless adapter and the Linksys E3000 dual band router as I want to upgrade the network range and speed to N. I set up a unique SSID and passphrase (WPA2) for both 2.4GHz and 5GHz bands. My XBOX could connect to the 2.4GHz band network and could connect to XBOX Live. But when I configured all the settings and tried to connect to the 5GHz band network, but no luck. My XBOX just said it failed to connect. I was sure that I did type in the SSID and passphrase correctly. I still cannot figure out what went wrong. I even suspected either the wireless adapter or the router malfunctioned.
View 9 Replies View RelatedRegion : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Centurylink
I'm using a WDR3600 router, and I'm having difficulty with getting internet access on the 5 GHz band. Right now the router is broadcasting in both 2.4 and 5 GHz as two separate APs. The 2.4 GHz band works perfectly fine, but when I connect to the 5 GHz band my device is not assigned an IP address and cannot connect to the internet (or even the router configuration page). Unfortunately, I don't have another device capable of accessing the 5 GHz band, so I can't check to see if the computer is at fault, but both the computer and the router have worked together with no problems before, and this computer has done fine in accessing other 5 GHz bands.
Changed from D-Link to Netgear router now only one of two computers cannot see the other. Error shows cannot connect to MSHOME network, need administrative approval. Computers are ethernet connected to the router. Have McAffe and both computers are "Trusted" Can do a search with XP and it shows the missing computer but unable to make a connection.
View 5 Replies View RelatedIs it possible to configure the RV042G so that one WAN port is connected to an ISP with a static IP and the other to an ISP with a dynamic IP. Then, I would like to setup a VPN tunnel and use the static IP for that and have all the other internet traffic go through the dynamic IP.
I know I could set it up with the static IP as the primary and the dynamic as the backup. Then, if I lost connectivity on the static IP, I would still have internet access, only the VPN tunnel would be down.
Trying to get my Netgear N600 router to connect to the internet...nothing will get it to connect.I am able to follow step-by-steps to resolve this
View 14 Replies View Relatedhow to wire a netgear n600 to a U-verse router in order to strengthen the wifi signal
View 1 Replies View RelatedMy HP printer finds my network, signs on just fine, has internet. My 2 wired PCs are connected and have internet. My 2 wireless laptops find the network and have internet. Everything has internet successfully thru the router....not one of them can print anything because not one of them can see the printer that I know is there.
View 3 Replies View RelatedI puchased the N600 WNDR3700v3 Dual Band Gigabit Router. I am able to see my wireless account I set up and is out there to connect to, but I cant connect. I can connect with an ethernet cord, but nothing wireless. It doesnt work for my home or work laptops. Prior to this I had another wireless set up and I am tempted to plug that one back in.
View 1 Replies View RelatedJust bought a new Netgear N600 router, hooked up 4 wired computers with no problem and got several wireless devices to hook up without issue. My laptop however, will not give me internet access when accessing the network wirelessly.
The access is labeled as Local Only, and the network is considered unidentified. Signal strength is excellent, and it reads the name of the new wireless server I created. It prompted me to enter the passphrase, which I did, and now my laptop is stuck on local only.
I tried updating my adaptor drivers but they are all up to date, and I tried to enter my adaptor into the address reservation on the router configuration page using the laptops MAC address and IP address.
I'm networking a clients home and he specifically wants dual-band wifi through-out. Now he has a fairly large 3 story house, and wanted to place an access point on the top floor to be assured he'll have strong and reliable signal. He's going to have multiple TV's wired into the network, as well as computers, laptops, phones, a Xbox 360 and a PS3. Were using Gigabit switches and a D-link Simultaneous Dual-band Gigabit router.The modem, router, and main 16 port switch will be in his basement in a semi-server room. He currently has 12 lines run throughout his house, 3 to the top floor, 5 to the main floor, and the ability to lay some in the basement if he needs. The 16port switch will plug into the router, I'm also putting an 8 port into the router from the main and top floor. The remaining lines will plug into the switch in the basement. On the top floor I was going to install an AP or Router turned into an AP into the 8port switch.Now the only reason I am considering using a router instead of just getting an AP, is that neither of us can find a simultaneous Dual-band AP. It seems the only simultaneous DB out there is in routers. So, my question is, will I be able to easily use a router as an AP AND get simultaneous Dual-band out of it if I do so? Is there a Simultaneous Dual-band AP on the market that would a better investment?
View 1 Replies View RelatedMy son just got an Asus Laptop from his school. It is running Windows 8.It connects to other peoples WIFI, just not my home WIFI.When he got it home he found the network, entered the password and nothing happened. Now it can't even find the network.There is nothing wrong with the router as every other device connects fine.The router is a Netgear n600 - DGND3700?
View 3 Replies View RelatedI have a netgear n600 router and in the room its in i get around 50 down and 12 up but in other rooms it drops significantly(the highest ive gotten is 11 down in other rooms). is there any setting i can go into.
View 3 Replies View Related[CODE]My router stopped working when I tried to connect my new Samsung Smart TV to the wireless network by using the menu on the tv. I had to go and press the WSL button on the router. I pressed what I though was the WSL button and now my router doesn't work. I has three lights lit up, the power on light, a small green blinking light and an amber light by the number 1.I've gone to the Netgear website and they want $69 for assistance to get my router up and running. I can buy a new router for that much money. There has to be an easier way.
View 2 Replies View RelatedI tried using an ethernet cable (cat 6) to connect my laptop (Sony VPC-1190X) to our gigbit router (Netgear N600 WNDR3800), but I get a message that there is no internet connectivity and the light representing that port on the router does not turn on.So, dead ethernet port on the router? Nope - unplugged the working printer from the router and used that ethernet port - same result.so dead ethernet port on the laptop? Nope - plugged the laptop into a gigbit switch (D-link DGS-2205) and instantly got internet connectivity. Note that this switch is plugged into the aforementioned Netgear router.For good measure, I tried power-cycling the router and laptop.
BTW - I can connect the laptop to the router wirelessly but I am trying to make use of the faster transfer speed of the ethernet connection.
