Make A Modem Splitter To Hook Up Netgear N600 Wireless Router?
May 1, 2012
I have a PC modem and recently purchase a netgear N600 wireless router. Do they make a splitter of some sort. So I can use both the PC and IPad? If they make a splitter?
can I use a RJ45 splitter with 2 female ends to run the internet off the same modem for 2 computers?ie:going from the ethernernet port off the back of my modem,install the splitter there and then send 2 diferant cables to 2 computers to have access to the internet with both compputers
[CODE]My router stopped working when I tried to connect my new Samsung Smart TV to the wireless network by using the menu on the tv. I had to go and press the WSL button on the router. I pressed what I though was the WSL button and now my router doesn't work. I has three lights lit up, the power on light, a small green blinking light and an amber light by the number 1.I've gone to the Netgear website and they want $69 for assistance to get my router up and running. I can buy a new router for that much money. There has to be an easier way.
My problem is I bought a 3.75G Modem (E353 USB Modem) from Optus the other day, and I have an old D-Link (DI-624) router I trying to hook it up to. And the thing is I am not sure to how? have the USB device plugged into a USB port and it works so far, I have an Ethernet cable going out of my 1 of 2 LAN ports my motherboard has in to the first LAN port on the router not the WAN port, as stated by other forums.This is as far as I've gone with this. I am going to buy a new router in the future , but I'd like to figure how to make it work first. Also are there any products I can buy to make it easer
I am trying to hook my bluray player up wirelessy I have a 2 wire modem I also bought a wireless router and a wlan to hook to the back of the bluray is this right
i've been tring to configure our netgear N600 router, it directs me to the support homepage all the time after we half through the configuration and got disconnected at first try. now i've tried clean dns, reset internet settings, nothing seems to work...
Just purchased a Belkin N600 DB N+ Wireless Router because the wireless on my Actiontec PK5000 really isn't so great. When I hook up the router to my modem and after running the install CD I couldn't get connected to the internet. So I looked at my modem and noticed the light where I had plugged in my router VIA ethernet wasn't lit up like the rest of my ethernet ports even after switching them around.
My mom wants to buy my dad a Kindle Fire for Christmas. Currently they have a desktop computer with a modem plugged into it and use Verizon dsl for their internet. The Kindle needs wi-fi and I don't want to disrupt the way their computer is set up now.Do I simply plug the router into the modem to get the wi-fi signal?
I'm not that great at networking, I'm pretty much a novice but I'm trying to connect a modem and router to my computer but get around bridging the modem if possible. You see, I am working with AT&T and their dsl modem access page only works for me if the modem is unbridged. If I bridge the modem, I cannot get on the page again to unbridge it while I am trying to hook up my router. When I need them to unbridge the modem, I have to stay on hold for hours. One guy even told me that he did unbridge the modem, but since my internet persisted not to work, he told me my ethernet card went bad of a sudden on my computer. I knew this was incorrect so after a few more hours on hold, I had a lady debate with me that she was not unbridging my modem since it was my ethernet card that was bad and not the bridging. Finally, laughing to herself, she unbridged the modem for me and it worked
Here is what I have: My modem is a Motorola 2210 Style: MSTATEA My router is a Linksys WRT120N
As of right now, I just have a LAN with my modem plugged in through an ethernet cord to my PC. Is there a way of me hooking up my Linksys router to my modem and PC without bridging the modem? If so, where can I find out instructions for this?
i have a Netgear N600 Wireless ADSL2+ router on wireless a/b/g/n dual band and all that but what i want to know is will i get better performance if i use a WirelessN card over G on a 10 - 15mb/s connection gaming wise and will it b a great increase over the G causeif its not a HUGE increase then i wont waste my money on a newer card?
My HP printer finds my network, signs on just fine, has internet. My 2 wired PCs are connected and have internet. My 2 wireless laptops find the network and have internet. Everything has internet successfully thru the router....not one of them can print anything because not one of them can see the printer that I know is there.
I puchased the N600 WNDR3700v3 Dual Band Gigabit Router. I am able to see my wireless account I set up and is out there to connect to, but I cant connect. I can connect with an ethernet cord, but nothing wireless. It doesnt work for my home or work laptops. Prior to this I had another wireless set up and I am tempted to plug that one back in.
Just bought a new Netgear N600 router, hooked up 4 wired computers with no problem and got several wireless devices to hook up without issue. My laptop however, will not give me internet access when accessing the network wirelessly.
The access is labeled as Local Only, and the network is considered unidentified. Signal strength is excellent, and it reads the name of the new wireless server I created. It prompted me to enter the passphrase, which I did, and now my laptop is stuck on local only.
I tried updating my adaptor drivers but they are all up to date, and I tried to enter my adaptor into the address reservation on the router configuration page using the laptops MAC address and IP address.
My son just got an Asus Laptop from his school. It is running Windows 8.It connects to other peoples WIFI, just not my home WIFI.When he got it home he found the network, entered the password and nothing happened. Now it can't even find the network.There is nothing wrong with the router as every other device connects fine.The router is a Netgear n600 - DGND3700?
I have a netgear n600 router and in the room its in i get around 50 down and 12 up but in other rooms it drops significantly(the highest ive gotten is 11 down in other rooms). is there any setting i can go into.
I tried using an ethernet cable (cat 6) to connect my laptop (Sony VPC-1190X) to our gigbit router (Netgear N600 WNDR3800), but I get a message that there is no internet connectivity and the light representing that port on the router does not turn on.So, dead ethernet port on the router? Nope - unplugged the working printer from the router and used that ethernet port - same result.so dead ethernet port on the laptop? Nope - plugged the laptop into a gigbit switch (D-link DGS-2205) and instantly got internet connectivity. Note that this switch is plugged into the aforementioned Netgear router.For good measure, I tried power-cycling the router and laptop.
BTW - I can connect the laptop to the router wirelessly but I am trying to make use of the faster transfer speed of the ethernet connection.
My net drops off every 20secs like clockwork, only affecting the wireless.I bought a new router yesterday to see if that would work, but it hasn't. At the moment, my router is connected to the modem, and my computer upstairs is running through the wireless connection from the router (not the modem)
My router is a NetGear N600 Wireless Dual Band... and my modem is a NetGear Rangemax wireless My computer is running Windows 7 and has a Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Network Adapter(im connecting to my network via the 2.4ghz... not the 5ghz)I've tried doing the whole, ipconfig/ release
I previously had DSL with my own combo modem/wireless router. I cancelled DSL and got Cable broadband instead. I've already unplugged my DSL modem/router and have my cable modem hooked up, all is running well. I bought a new Netgear N600 wireless router that I want to set up. Do I have to uninstall any software or files from my previous DSL modem/router before installing my new cable router?
I have internet through my cable company and currently use their wireless netgear router. I purchased a Netgear Router N600 but it does not have a port for the cable connection. Can you recommend the correct wireless router
a few days ago my router was not working for wireless out of no where and its still not working. i only get internet on my main computer that its connected too. not my laptop ipod or tablet
about two days ago my main PC lost the ability to connect to the internet. I'm useing a trendnet tew-687ga adapter and a netgear n600 router. I can't ping the default gatway 192.168.1.1
I recently put in a Netgear firewall, configured it, its running no problem. Then I setup a new Netgear N600 wireless router, configured it, gave it a static IP, connected to it, works like a charm. Thing is, when I try to access the web gui I receive nothing.. Is the Netgear firewall taking priority or something? I went directly connected to the netgear wifi router and double checked to make sure that there was no settings restricting administration from wifi users, etc..
I got new internet last Thursday. It is fiber optic through VTX1. I am running windows 7. I can connect to the internet just fine directly but when I try the netgear it tells me No Internet Connection. When I go through the setup process it tells me No Ethernet Cable is Plugged Into The Router Internet Port. When I hook up my very old Cisco router the internet and Wi-fi work just fine. I have updated the drivers and have windows firewall off. This is it plugged directly in:
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:UsersKellan>ipconfig/all Windows IP Configuration Host Name . . . . . . . . . . . . : Kellan-PC Primary Dns Suffix . . . . . . . :
I have cable broadband internet. My internet modem is a Ubee D3.0. It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via ethernet. My wifi went down the other day. Devices were connected, but were not getting any internet service. In troubleshooting, I attempted to dial in to the router using www.routerlogin.net as well as 192.168.0.1, and I could not get into the router. I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one. I got home and plugged it in, still not working. I can't access it using the above mentioned methods, and the setup software does not detect a router present. I unplugged the router and hooked the computer up directly to the internet modem. Still no luck. The computer does show a network connection in the system tray, but with no internet. I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. I even did a system restore to a restore point last week when I know the internet was working. No luck.
Does it matter what kind of modem and wireless router to make DSL the fastest? Also is a modem with built in wireless better than having separate units?