My problem is I bought a 3.75G Modem (E353 USB Modem) from Optus the other day, and I have an old D-Link (DI-624) router I trying to hook it up to. And the thing is I am not sure to how? have the USB device plugged into a USB port and it works so far, I have an Ethernet cable going out of my 1 of 2 LAN ports my motherboard has in to the first LAN port on the router not the WAN port, as stated by other forums.This is as far as I've gone with this. I am going to buy a new router in the future , but I'd like to figure how to make it work first. Also are there any products I can buy to make it easer
I am trying to hook my bluray player up wirelessy I have a 2 wire modem I also bought a wireless router and a wlan to hook to the back of the bluray is this right
My mom wants to buy my dad a Kindle Fire for Christmas. Currently they have a desktop computer with a modem plugged into it and use Verizon dsl for their internet. The Kindle needs wi-fi and I don't want to disrupt the way their computer is set up now.Do I simply plug the router into the modem to get the wi-fi signal?
I have a PC modem and recently purchase a netgear N600 wireless router. Do they make a splitter of some sort. So I can use both the PC and IPad? If they make a splitter?
I'm not that great at networking, I'm pretty much a novice but I'm trying to connect a modem and router to my computer but get around bridging the modem if possible. You see, I am working with AT&T and their dsl modem access page only works for me if the modem is unbridged. If I bridge the modem, I cannot get on the page again to unbridge it while I am trying to hook up my router. When I need them to unbridge the modem, I have to stay on hold for hours. One guy even told me that he did unbridge the modem, but since my internet persisted not to work, he told me my ethernet card went bad of a sudden on my computer. I knew this was incorrect so after a few more hours on hold, I had a lady debate with me that she was not unbridging my modem since it was my ethernet card that was bad and not the bridging. Finally, laughing to herself, she unbridged the modem for me and it worked
Here is what I have: My modem is a Motorola 2210 Style: MSTATEA My router is a Linksys WRT120N
As of right now, I just have a LAN with my modem plugged in through an ethernet cord to my PC. Is there a way of me hooking up my Linksys router to my modem and PC without bridging the modem? If so, where can I find out instructions for this?
I have cable I recently ran a cat 5 from my router to my sons com internet runs great but the games he plays lag my router is baout 5 years old its a belkin also need the router to be wireless.
I was able 2 find my Evo shift through the ps3, but couldnt get online. I used Astro file mngr to navigate to visionary and run apk, usb debug and temp root but I can't find visionary. Rooting successfully has been difficult so far. Hardwire...maybe plug phone line from modem 2 ps3!??
How do I hookup my blue ray player to my CLEAR internet modem? Themodem is hooked up to my pc. I have an ethernet cable that I can hook upto the blue ray but can,t hook up to the modem as it only has one ethernet
I have a laptop and an xbox I have done everything the vides on the internet have told me to do to hook up to xbox live I have hooked an ethernet cable to my laptop and to the xbox and did the whole network sharing thing but when I test the connection on the xbox it says there is a problem with the connection
I have an old WRT54GS v6 that's sitting around collecting dust. I wondered if it's possible to plug it into the wired hub ( I have in my basement where the wireless is somewhat weak) to get the signal a bit stronger down here?I guess the operative terminology is 'wireless access point' I've found some instructions but they all say to connect the access point directly to the gateway via cat-5.. hoping I can do so with a hub. If not.. could I just switch the hub and the access point in the setup?
I buy my wifi from the rv park that I live in how do I hook up an antenna to get a stronger signal to my router. I would have wifi coming in then my network going out .
[code] I have tried to configure this setup and have had no luck,and in the proccess have learned enough about networking to be really dangerous to my equipment. Is the problem DHCP? or incorporating MAC routing with IP routing? I'm pretty sure I've managed to program one of my keyboard buttons into a World Delete Function,.
I can not connect from a remote location it connects from my home computer wirelessly but not from a remote location?(A) By default, the HTTP port on the camera is port 80. You will need to open TCP port 80 on your router to the IP address of the camera?
I formatted my new 3TB External hard drive on my computer and it shows close to 3TB space. Now when I hook it up to EA6500 router, it shows on 746.51 GB total. I have latest firmware installed.
After popping in the installation CD, the screen says hook everything up, which I do. Then click next, where it says "Searching Networks", then quickly changes to "Connecting to Network", and then it says it "Cannot Find Router.". Err. Check setup, etc.If I hook up directly to new router VIA internet cable. Also, this is strange: When I just open up a web browser and try to log into the router 192.168.1.1, using no user name, administration as the password, it won't let me in to the router. Even after I have reset the router with a pen.
I recently bought EA3500 router. I am not able to hook up 2 storage external HDD and 1 USB printer usnig the router.I am connecting all 3 to a USB hub which i am connecting to the router.
I have a computer with D-Link wireless router, and have set up another computer in the house a long way from the router, what do I have to do to get an internet contection on the new site ?
I have a D-Link Ethernet Switch. I have my computer and a Roku hooked to it. I tried hooking Another Roku and it cannot hook to Network. I unplugged my old Roku and hooked the new one and no problem. Just can't hook both up at once. Is there something I should be doing to enable this? I am allowed 4 computers through my network.
I'm trying to find out what is the best way is to hook up my XPS 410 desktop to stream movies to my Sony Bravia HD TV. The PC is not wireless nor does it appear to have a HDML connection. I have a cable connection which runs the PC.
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
